Document directives passwd,passwd.c,perm

[idzebra-moved-to-github.git] / doc / administration.xml

<chapter id="administration">
 <!-- $Id: administration.xml,v 1.18 2005-05-30 13:22:11 adam Exp $ -->
 <title>Administrating Zebra</title>
 <!-- ### It's a bit daft that this chapter (which describes half of
          the configuration-file formats) is separated from
          "recordmodel.xml" (which describes the other half) by the
          instructions on running zebraidx and zebrasrv.  Some careful
          re-ordering is required here.
 -->

 <para>
  Unlike many simpler retrieval systems, Zebra supports safe, incremental
  updates to an existing index.
 </para>
 
 <para>
  Normally, when Zebra modifies the index it reads a number of records
  that you specify.
  Depending on your specifications and on the contents of each record
  one the following events take place for each record:
  <variablelist>
   
   <varlistentry>
    <term>Insert</term>
    <listitem>
     <para>
      The record is indexed as if it never occurred before.
      Either the Zebra system doesn't know how to identify the record or
      Zebra can identify the record but didn't find it to be already indexed.
     </para>
    </listitem>
   </varlistentry>
   <varlistentry>
    <term>Modify</term>
    <listitem>
     <para>
      The record has already been indexed.
      In this case either the contents of the record or the location
      (file) of the record indicates that it has been indexed before.
     </para>
    </listitem>
   </varlistentry>
   <varlistentry>
    <term>Delete</term>
    <listitem>
     <para>
      The record is deleted from the index. As in the
      update-case it must be able to identify the record.
     </para>
    </listitem>
   </varlistentry>
  </variablelist>
 </para>
 
 <para>
  Please note that in both the modify- and delete- case the Zebra
  indexer must be able to generate a unique key that identifies the record 
  in question (more on this below).
 </para>
 
 <para>
  To administrate the Zebra retrieval system, you run the
  <literal>zebraidx</literal> program.
  This program supports a number of options which are preceded by a dash,
  and a few commands (not preceded by dash).
</para>
 
 <para>
  Both the Zebra administrative tool and the Z39.50 server share a
  set of index files and a global configuration file.
  The name of the configuration file defaults to
  <literal>zebra.cfg</literal>.
  The configuration file includes specifications on how to index
  various kinds of records and where the other configuration files
  are located. <literal>zebrasrv</literal> and <literal>zebraidx</literal>
  <emphasis>must</emphasis> be run in the directory where the
  configuration file lives unless you indicate the location of the 
  configuration file by option <literal>-c</literal>.
 </para>
 
 <sect1 id="record-types">
  <title>Record Types</title>
  
  <para>
   Indexing is a per-record process, in which either insert/modify/delete
   will occur. Before a record is indexed search keys are extracted from
   whatever might be the layout the original record (sgml,html,text, etc..).
   The Zebra system currently supports two fundamental types of records:
   structured and simple text.
   To specify a particular extraction process, use either the
   command line option <literal>-t</literal> or specify a
   <literal>recordType</literal> setting in the configuration file.
  </para>
  
 </sect1>
 
 <sect1 id="configuration-file">
  <title>The Zebra Configuration File</title>
  
  <para>
   The Zebra configuration file, read by <literal>zebraidx</literal> and
   <literal>zebrasrv</literal> defaults to <literal>zebra.cfg</literal>
   unless specified by <literal>-c</literal> option.
  </para>
  
  <para>
   You can edit the configuration file with a normal text editor.
   parameter names and values are separated by colons in the file. Lines
   starting with a hash sign (<literal>#</literal>) are
   treated as comments.
  </para>
  
  <para>
   If you manage different sets of records that share common
   characteristics, you can organize the configuration settings for each
   type into "groups".
   When <literal>zebraidx</literal> is run and you wish to address a
   given group you specify the group name with the <literal>-g</literal>
   option.
   In this case settings that have the group name as their prefix 
   will be used by <literal>zebraidx</literal>.
   If no <literal>-g</literal> option is specified, the settings
   without prefix are used.
  </para>
  
  <para>
   In the configuration file, the group name is placed before the option
   name itself, separated by a dot (.). For instance, to set the record type
   for group <literal>public</literal> to <literal>grs.sgml</literal>
   (the SGML-like format for structured records) you would write:
  </para>
  
  <para>
   <screen>
    public.recordType: grs.sgml
   </screen>   
  </para>
  
  <para>
   To set the default value of the record type to <literal>text</literal>
   write:
  </para>
  
  <para>
   <screen>
    recordType: text
   </screen>
  </para>
  
  <para>
   The available configuration settings are summarized below. They will be
   explained further in the following sections.
  </para>
  
  <!--
   FIXME - Didn't Adam make something to have multiple databases in multiple dirs...
  -->
  
  <para>
   <variablelist>
    
    <varlistentry>
     <term>
      <emphasis>group</emphasis>
      .recordType[<emphasis>.name</emphasis>]:
      <replaceable>type</replaceable>
     </term>
     <listitem>
      <para>
       Specifies how records with the file extension
       <emphasis>name</emphasis> should be handled by the indexer.
       This option may also be specified as a command line option
       (<literal>-t</literal>). Note that if you do not specify a
       <emphasis>name</emphasis>, the setting applies to all files.
       In general, the record type specifier consists of the elements (each
       element separated by dot), <emphasis>fundamental-type</emphasis>,
       <emphasis>file-read-type</emphasis> and arguments. Currently, two
       fundamental types exist, <literal>text</literal> and
       <literal>grs</literal>.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term><emphasis>group</emphasis>.recordId: 
     <replaceable>record-id-spec</replaceable></term>
     <listitem>
      <para>
       Specifies how the records are to be identified when updated. See
       <xref linkend="locating-records"/>.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term><emphasis>group</emphasis>.database:
     <replaceable>database</replaceable></term>
     <listitem>
      <para>
       Specifies the Z39.50 database name.
       <!-- FIXME - now we can have multiple databases in one server. -H -->
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term><emphasis>group</emphasis>.storeKeys:
     <replaceable>boolean</replaceable></term>
     <listitem>
      <para>
       Specifies whether key information should be saved for a given
       group of records. If you plan to update/delete this type of
       records later this should be specified as 1; otherwise it
       should be 0 (default), to save register space.
       <!-- ### this is the first mention of "register" -->
       See <xref linkend="file-ids"/>.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term><emphasis>group</emphasis>.storeData:
      <replaceable>boolean</replaceable></term>
     <listitem>
      <para>
       Specifies whether the records should be stored internally
       in the Zebra system files.
       If you want to maintain the raw records yourself,
       this option should be false (0).
       If you want Zebra to take care of the records for you, it
       should be true(1).
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <!-- ### probably a better place to define "register" -->
     <term>register: <replaceable>register-location</replaceable></term>
     <listitem>
      <para>
       Specifies the location of the various register files that Zebra uses
       to represent your databases.
       See <xref linkend="register-location"/>.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term>shadow: <replaceable>register-location</replaceable></term>
     <listitem>
      <para>
       Enables the <emphasis>safe update</emphasis> facility of Zebra, and
       tells the system where to place the required, temporary files.
       See <xref linkend="shadow-registers"/>.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term>lockDir: <replaceable>directory</replaceable></term>
     <listitem>
      <para>
       Directory in which various lock files are stored.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term>keyTmpDir: <replaceable>directory</replaceable></term>
     <listitem>
      <para>
       Directory in which temporary files used during zebraidx's update
       phase are stored. 
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term>setTmpDir: <replaceable>directory</replaceable></term>
     <listitem>
      <para>
       Specifies the directory that the server uses for temporary result sets.
       If not specified <literal>/tmp</literal> will be used.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term>profilePath: <replaceable>path</replaceable></term>
     <listitem>
      <para>
       Specifies a path of profile specification files. 
       The path is composed of one or more directories separated by
       colon. Similar to PATH for UNIX systems.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term>attset: <replaceable>filename</replaceable></term>
     <listitem>
      <para>
       Specifies the filename(s) of attribute set files for use in
       searching. At least the Bib-1 set should be loaded
       (<literal>bib1.att</literal>).
       The <literal>profilePath</literal> setting is used to look for
       the specified files.
       See <xref linkend="attset-files"/>
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term>memMax: <replaceable>size</replaceable></term>
     <listitem>
      <para>
       Specifies <replaceable>size</replaceable> of internal memory
       to use for the zebraidx program.
       The amount is given in megabytes - default is 4 (4 MB).
       The more memory, the faster large updates happen, up to about
       half the free memory available on the computer.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term>tempfiles: <replaceable>Yes/Auto/No</replaceable></term>
     <listitem>
      <para>
       Tells zebra if it should use temporary files when indexing. The
       default is Auto, in which case zebra uses temporary files only
       if it would need more that <replaceable>memMax</replaceable> 
       megabytes of memory. This should be good for most uses.
      </para>
     </listitem>
    </varlistentry>

    <varlistentry>
     <term>root: <replaceable>dir</replaceable></term>
     <listitem>
      <para>
       Specifies a directory base for Zebra. All relative paths
       given (in profilePath, register, shadow) are based on this
       directory. This setting is useful if your Zebra server
       is running in a different directory from where
       <literal>zebra.cfg</literal> is located.
      </para>
     </listitem>
    </varlistentry>

    <varlistentry>
     <term>passwd: <replaceable>file</replaceable></term>
     <listitem>
      <para>
       Specifies a file with description of user accounts for Zebra.
       The format is similar to that known to Apache's htpasswd files
       and UNIX' passwd files. Non-empty lines not beginning with
       # are considered account lines. There is one account per-line.
       A line consists of fields separate by a single colon character.
       First field is username, second is password.
      </para>
     </listitem>
    </varlistentry>

    <varlistentry>
     <term>passwd.c: <replaceable>file</replaceable></term>
     <listitem>
      <para>
       Specifies a file with description of user accounts for Zebra.
       File format is similar to that used by the passwd directive except
       that the password are encrypted. Use Apache's htpasswd or similar
       for maintenanace.
      </para>
     </listitem>
    </varlistentry>

    <varlistentry>
     <term>perm.<replaceable>user</replaceable>:
     <replaceable>permstring</replaceable></term>
     <listitem>
      <para>
       Specifies permissions (priviledge) for a user that are allowed
       to access Zebra via the passwd system. There are two kinds
       of permissions currently: read (r) and write(w). By default
       users not listed in a permission directive are given the read
       priviledge. To specify permissions for a user with no
       username, or Z39.50 anonymous style use
        <literal>anonymous</literal>. The permstring consists of
       a sequence of characters. Include character <literal>w</literal>
       for write/update access, <literal>r</literal> for read access.
      </para>
     </listitem>
    </varlistentry>

   </variablelist>
  </para>
  
 </sect1>
 
 <sect1 id="locating-records">
  <title>Locating Records</title>
  
  <para>
   The default behavior of the Zebra system is to reference the
   records from their original location, i.e. where they were found when you
   ran <literal>zebraidx</literal>.
   That is, when a client wishes to retrieve a record
   following a search operation, the files are accessed from the place
   where you originally put them - if you remove the files (without
   running <literal>zebraidx</literal> again, the server will return
   diagnostic number 14 (``System error in presenting records'') to
   the client.
  </para>
  
  <para>
   If your input files are not permanent - for example if you retrieve
   your records from an outside source, or if they were temporarily
   mounted on a CD-ROM drive,
   you may want Zebra to make an internal copy of them. To do this,
   you specify 1 (true) in the <literal>storeData</literal> setting. When
   the Z39.50 server retrieves the records they will be read from the
   internal file structures of the system.
  </para>
  
 </sect1>
 
 <sect1 id="simple-indexing">
  <title>Indexing with no Record IDs (Simple Indexing)</title>
  
  <para>
   If you have a set of records that are not expected to change over time
   you may can build your database without record IDs.
   This indexing method uses less space than the other methods and
   is simple to use. 
  </para>
  
  <para>
   To use this method, you simply omit the <literal>recordId</literal> entry
   for the group of files that you index. To add a set of records you use
   <literal>zebraidx</literal> with the <literal>update</literal> command. The
   <literal>update</literal> command will always add all of the records that it
   encounters to the index - whether they have already been indexed or
   not. If the set of indexed files change, you should delete all of the
   index files, and build a new index from scratch.
  </para>
  
  <para>
   Consider a system in which you have a group of text files called
   <literal>simple</literal>.
   That group of records should belong to a Z39.50 database called
   <literal>textbase</literal>.
   The following <literal>zebra.cfg</literal> file will suffice:
  </para>
  <para>
   
   <screen>
    profilePath: /usr/local/idzebra/tab
    attset: bib1.att
    simple.recordType: text
    simple.database: textbase
   </screen>

  </para>
  
  <para>
   Since the existing records in an index can not be addressed by their
   IDs, it is impossible to delete or modify records when using this method.
  </para>
  
 </sect1>
 
 <sect1 id="file-ids">
  <title>Indexing with File Record IDs</title>
  
  <para>
   If you have a set of files that regularly change over time: Old files
   are deleted, new ones are added, or existing files are modified, you
   can benefit from using the <emphasis>file ID</emphasis>
   indexing methodology.
   Examples of this type of database might include an index of WWW
   resources, or a USENET news spool area.
   Briefly speaking, the file key methodology uses the directory paths
   of the individual records as a unique identifier for each record.
   To perform indexing of a directory with file keys, again, you specify
   the top-level directory after the <literal>update</literal> command.
   The command will recursively traverse the directories and compare
   each one with whatever have been indexed before in that same directory.
   If a file is new (not in the previous version of the directory) it
   is inserted into the registers; if a file was already indexed and
   it has been modified since the last update, the index is also
   modified; if a file has been removed since the last
   visit, it is deleted from the index.
  </para>
  
  <para>
   The resulting system is easy to administrate. To delete a record you
   simply have to delete the corresponding file (say, with the
   <literal>rm</literal> command). And to add records you create new
   files (or directories with files). For your changes to take effect
   in the register you must run <literal>zebraidx update</literal> with
   the same directory root again. This mode of operation requires more
   disk space than simpler indexing methods, but it makes it easier for
   you to keep the index in sync with a frequently changing set of data.
   If you combine this system with the <emphasis>safe update</emphasis>
   facility (see below), you never have to take your server off-line for
   maintenance or register updating purposes.
  </para>
  
  <para>
   To enable indexing with pathname IDs, you must specify
   <literal>file</literal> as the value of <literal>recordId</literal>
   in the configuration file. In addition, you should set
   <literal>storeKeys</literal> to <literal>1</literal>, since the Zebra
   indexer must save additional information about the contents of each record
   in order to modify the indexes correctly at a later time.
  </para>
  
   <!--
    FIXME - There must be a simpler way to do this with Adams string tags -H
     -->

  <para>
   For example, to update records of group <literal>esdd</literal>
   located below
   <literal>/data1/records/</literal> you should type:
   <screen>
    $ zebraidx -g esdd update /data1/records
   </screen>
  </para>
  
  <para>
   The corresponding configuration file includes:
   <screen>
    esdd.recordId: file
    esdd.recordType: grs.sgml
    esdd.storeKeys: 1
   </screen>
  </para>
  
  <note>
   <para>You cannot start out with a group of records with simple
    indexing (no record IDs as in the previous section) and then later
    enable file record Ids. Zebra must know from the first time that you
    index the group that
    the files should be indexed with file record IDs.
   </para>
   </note>
  
  <para>
   You cannot explicitly delete records when using this method (using the
   <literal>delete</literal> command to <literal>zebraidx</literal>. Instead
   you have to delete the files from the file system (or move them to a
   different location)
   and then run <literal>zebraidx</literal> with the
   <literal>update</literal> command.
  </para>
  <!-- ### what happens if a file contains multiple records? -->
</sect1>
 
 <sect1 id="generic-ids">
  <title>Indexing with General Record IDs</title>
  
  <para>
   When using this method you construct an (almost) arbitrary, internal
   record key based on the contents of the record itself and other system
   information. If you have a group of records that explicitly associates
   an ID with each record, this method is convenient. For example, the
   record format may contain a title or a ID-number - unique within the group.
   In either case you specify the Z39.50 attribute set and use-attribute
   location in which this information is stored, and the system looks at
   that field to determine the identity of the record.
  </para>
  
  <para>
   As before, the record ID is defined by the <literal>recordId</literal>
   setting in the configuration file. The value of the record ID specification
   consists of one or more tokens separated by whitespace. The resulting
   ID is represented in the index by concatenating the tokens and
   separating them by ASCII value (1).
  </para>
  
  <para>
   There are three kinds of tokens:
   <variablelist>
    
    <varlistentry>
     <term>Internal record info</term>
     <listitem>
      <para>
       The token refers to a key that is
       extracted from the record. The syntax of this token is
       <literal>(</literal> <emphasis>set</emphasis> <literal>,</literal>
       <emphasis>use</emphasis> <literal>)</literal>,
       where <emphasis>set</emphasis> is the
       attribute set name <emphasis>use</emphasis> is the
       name or value of the attribute.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term>System variable</term>
     <listitem>
      <para>
       The system variables are preceded by
       
       <screen>
        $
       </screen>
       and immediately followed by the system variable name, which
       may one of
       <variablelist>
        
        <varlistentry>
         <term>group</term>
         <listitem>
          <para>
           Group name.
          </para>
         </listitem>
        </varlistentry>
        <varlistentry>
         <term>database</term>
         <listitem>
          <para>
           Current database specified.
          </para>
         </listitem>
        </varlistentry>
        <varlistentry>
         <term>type</term>
         <listitem>
          <para>
           Record type.
          </para>
         </listitem>
        </varlistentry>
       </variablelist>
      </para>
     </listitem>
    </varlistentry>
    <varlistentry>
     <term>Constant string</term>
     <listitem>
      <para>
       A string used as part of the ID &mdash; surrounded
       by single- or double quotes.
      </para>
     </listitem>
    </varlistentry>
   </variablelist>
  </para>
  
  <para>
   For instance, the sample GILS records that come with the Zebra
   distribution contain a unique ID in the data tagged Control-Identifier.
   The data is mapped to the Bib-1 use attribute Identifier-standard
   (code 1007). To use this field as a record id, specify
   <literal>(bib1,Identifier-standard)</literal> as the value of the
   <literal>recordId</literal> in the configuration file.
   If you have other record types that uses the same field for a
   different purpose, you might add the record type
   (or group or database name) to the record id of the gils
   records as well, to prevent matches with other types of records.
   In this case the recordId might be set like this:
   
   <screen>
    gils.recordId: $type (bib1,Identifier-standard)
   </screen>
   
  </para>
  
  <para>
   (see <xref linkend="data-model"/>
    for details of how the mapping between elements of your records and
    searchable attributes is established).
  </para>
  
  <para>
   As for the file record ID case described in the previous section,
   updating your system is simply a matter of running
   <literal>zebraidx</literal>
   with the <literal>update</literal> command. However, the update with general
   keys is considerably slower than with file record IDs, since all files
   visited must be (re)read to discover their IDs. 
  </para>
  
  <para>
   As you might expect, when using the general record IDs
   method, you can only add or modify existing records with the
   <literal>update</literal> command.
   If you wish to delete records, you must use the,
   <literal>delete</literal> command, with a directory as a parameter.
   This will remove all records that match the files below that root
   directory.
  </para>
  
 </sect1>
 
 <sect1 id="register-location">
  <title>Register Location</title>
  
  <para>
   Normally, the index files that form dictionaries, inverted
   files, record info, etc., are stored in the directory where you run
   <literal>zebraidx</literal>. If you wish to store these, possibly large,
   files somewhere else, you must add the <literal>register</literal>
   entry to the <literal>zebra.cfg</literal> file.
   Furthermore, the Zebra system allows its file
   structures to span multiple file systems, which is useful for
   managing very large databases. 
  </para>
  
  <para>
   The value of the <literal>register</literal> setting is a sequence
   of tokens. Each token takes the form:
   
   <screen>
    <emphasis>dir</emphasis><literal>:</literal><emphasis>size</emphasis>. 
   </screen>
   
   The <emphasis>dir</emphasis> specifies a directory in which index files
   will be stored and the <emphasis>size</emphasis> specifies the maximum
   size of all files in that directory. The Zebra indexer system fills
   each directory in the order specified and use the next specified
   directories as needed.
   The <emphasis>size</emphasis> is an integer followed by a qualifier
   code, 
   <literal>b</literal> for bytes,
   <literal>k</literal> for kilobytes.
   <literal>M</literal> for megabytes,
   <literal>G</literal> for gigabytes.
  </para>
  
  <para>
   For instance, if you have allocated two disks for your register, and
   the first disk is mounted
   on <literal>/d1</literal> and has 2GB of free space and the
   second, mounted on <literal>/d2</literal> has 3.6 GB, you could
   put this entry in your configuration file:
   
   <screen>
    register: /d1:2G /d2:3600M
   </screen>
   
  </para>
  
  <para>
   Note that Zebra does not verify that the amount of space specified is
   actually available on the directory (file system) specified - it is
   your responsibility to ensure that enough space is available, and that
   other applications do not attempt to use the free space. In a large
   production system, it is recommended that you allocate one or more
   file system exclusively to the Zebra register files.
  </para>
  
 </sect1>
 
 <sect1 id="shadow-registers">
  <title>Safe Updating - Using Shadow Registers</title>
  
  <sect2>
   <title>Description</title>
   
   <para>
    The Zebra server supports <emphasis>updating</emphasis> of the index
    structures. That is, you can add, modify, or remove records from
    databases managed by Zebra without rebuilding the entire index.
    Since this process involves modifying structured files with various
    references between blocks of data in the files, the update process
    is inherently sensitive to system crashes, or to process interruptions:
    Anything but a successfully completed update process will leave the
    register files in an unknown state, and you will essentially have no
    recourse but to re-index everything, or to restore the register files
    from a backup medium.
    Further, while the update process is active, users cannot be
    allowed to access the system, as the contents of the register files
    may change unpredictably.
   </para>
   
   <para>
    You can solve these problems by enabling the shadow register system in
    Zebra.
    During the updating procedure, <literal>zebraidx</literal> will temporarily
    write changes to the involved files in a set of "shadow
    files", without modifying the files that are accessed by the
    active server processes. If the update procedure is interrupted by a
    system crash or a signal, you simply repeat the procedure - the
    register files have not been changed or damaged, and the partially
    written shadow files are automatically deleted before the new updating
    procedure commences.
   </para>
   
   <para>
    At the end of the updating procedure (or in a separate operation, if
    you so desire), the system enters a "commit mode". First,
    any active server processes are forced to access those blocks that
    have been changed from the shadow files rather than from the main
    register files; the unmodified blocks are still accessed at their
    normal location (the shadow files are not a complete copy of the
    register files - they only contain those parts that have actually been
    modified). If the commit process is interrupted at any point during the
    commit process, the server processes will continue to access the
    shadow files until you can repeat the commit procedure and complete
    the writing of data to the main register files. You can perform
    multiple update operations to the registers before you commit the
    changes to the system files, or you can execute the commit operation
    at the end of each update operation. When the commit phase has
    completed successfully, any running server processes are instructed to
    switch their operations to the new, operational register, and the
    temporary shadow files are deleted.
   </para>
   
  </sect2>
  
  <sect2>
   <title>How to Use Shadow Register Files</title>
   
   <para>
    The first step is to allocate space on your system for the shadow
    files.
    You do this by adding a <literal>shadow</literal> entry to the
    <literal>zebra.cfg</literal> file.
    The syntax of the <literal>shadow</literal> entry is exactly the
    same as for the <literal>register</literal> entry
    (see <xref linkend="register-location"/>).
     The location of the shadow area should be
     <emphasis>different</emphasis> from the location of the main register
     area (if you have specified one - remember that if you provide no
     <literal>register</literal> setting, the default register area is the
     working directory of the server and indexing processes).
   </para>
   
   <para>
    The following excerpt from a <literal>zebra.cfg</literal> file shows
    one example of a setup that configures both the main register
    location and the shadow file area.
    Note that two directories or partitions have been set aside
    for the shadow file area. You can specify any number of directories
    for each of the file areas, but remember that there should be no
    overlaps between the directories used for the main registers and the
    shadow files, respectively.
   </para>
   <para>
    
    <screen>
     register: /d1:500M
     
     shadow: /scratch1:100M /scratch2:200M
    </screen>
    
   </para>
   
   <para>
    When shadow files are enabled, an extra command is available at the
    <literal>zebraidx</literal> command line.
    In order to make changes to the system take effect for the
    users, you'll have to submit a "commit" command after a
    (sequence of) update operation(s).
   </para>
   
   <para>
    
    <screen>
     $ zebraidx update /d1/records 
     $ zebraidx commit
    </screen>
    
   </para>
   
   <para>
    Or you can execute multiple updates before committing the changes:
   </para>
   
   <para>
    
    <screen>
     $ zebraidx -g books update /d1/records  /d2/more-records
     $ zebraidx -g fun update /d3/fun-records
     $ zebraidx commit
    </screen>
    
   </para>
   
   <para>
    If one of the update operations above had been interrupted, the commit
    operation on the last line would fail: <literal>zebraidx</literal>
    will not let you commit changes that would destroy the running register.
    You'll have to rerun all of the update operations since your last
    commit operation, before you can commit the new changes.
   </para>
   
   <para>
    Similarly, if the commit operation fails, <literal>zebraidx</literal>
    will not let you start a new update operation before you have
    successfully repeated the commit operation.
    The server processes will keep accessing the shadow files rather
    than the (possibly damaged) blocks of the main register files
    until the commit operation has successfully completed.
   </para>
   
   <para>
    You should be aware that update operations may take slightly longer
    when the shadow register system is enabled, since more file access
    operations are involved. Further, while the disk space required for
    the shadow register data is modest for a small update operation, you
    may prefer to disable the system if you are adding a very large number
    of records to an already very large database (we use the terms
    <emphasis>large</emphasis> and <emphasis>modest</emphasis>
    very loosely here, since every application will have a
    different perception of size).
    To update the system without the use of the the shadow files,
    simply run <literal>zebraidx</literal> with the <literal>-n</literal>
    option (note that you do not have to execute the
    <emphasis>commit</emphasis> command of <literal>zebraidx</literal>
    when you temporarily disable the use of the shadow registers in
    this fashion.
    Note also that, just as when the shadow registers are not enabled,
    server processes will be barred from accessing the main register
    while the update procedure takes place.
   </para>
   
  </sect2>
  
 </sect1>
 
</chapter>
 <!-- Keep this comment at the end of the file
 Local variables:
 mode: sgml
 sgml-omittag:t
 sgml-shorttag:t
 sgml-minimize-attributes:nil
 sgml-always-quote-attributes:t
 sgml-indent-step:1
 sgml-indent-data:t
 sgml-parent-document: "zebra.xml"
 sgml-local-catalogs: nil
 sgml-namecase-general:t
 End:
 -->