Makefile enhanced. Changed doc a bit.

diff --git a/doc/Makefile b/doc/Makefile
index 19aa500..d2f5cf2 100644 (file)
--- a/doc/Makefile
+++ b/doc/Makefile
@@ -1,17 +1,17 @@
-# $Id: Makefile,v 1.2 1996/01/18 16:07:57 adam Exp $
+# $Id: Makefile,v 1.3 1996/04/25 10:21:53 adam Exp $
 all: egate.ps egate.txt egate.html
 
 egate.txt: egate.sgml
        sgml2txt egate.sgml
 
 egate.dvi: egate.sgml
-       sgml2ps -d zebra.sgml
+       sgml2ps -d egate.sgml
 
 egate.ps: egate.sgml
-       sgml2ps zebra.sgml
+       sgml2ps egate.sgml
 
 egate.html: egate.sgml
-       sgml2html zebra.sgml
+       sgml2html egate.sgml
 
 clean:
        rm -f [0-9]* *.bak

diff --git a/doc/egate.sgml b/doc/egate.sgml
index 7eac1a5..72963b6 100644 (file)
--- a/doc/egate.sgml
+++ b/doc/egate.sgml
@@ -1,13 +1,13 @@
 <!doctype linuxdoc system>
 
 <!--
-  $Id: egate.sgml,v 1.8 1996/01/18 16:07:58 adam Exp $
+  $Id: egate.sgml,v 1.9 1996/04/25 10:21:53 adam Exp $
 -->
 
 <article>
 <title>Email/Z39.50 gateway guide
 <author>Europagate, 1995
-<date>$Revision: 1.8 $
+<date>$Revision: 1.9 $
 <abstract>
 This document describes a Email server that provides access to the
 Z39.50 protocol.
@@ -34,13 +34,13 @@ The ES can use either CNIDR's Zdist package or the YAZ package from
 Index Data to interface the Z39.50 protocol. So you need to obtain
 one of these first.
 
-The Zdist package can be found in:
+The zdist package can be found in:
 
 <htmlurl
 url="ftp://ftp.cnidr.org/pub/NIDR.tools/zdist/zdist102b1-1.tar.Z" 
  name="ftp://ftp.cnidr.org/pub/NIDR.tools/zdist/zdist102b1-1.tar.Z">
 
-The Zdist package doesn't support result-set references. Also, it has a few
+The zdist package doesn't support result-set references. Also, it has a few
 bugs. Therefore we've included a patch <tt/zdist.patch/ which fixes
 some of these bugs.
 Run patch in the directory above <tt/zdist102b1-1/:
@@ -49,12 +49,12 @@ $ patch <zdist.patch
 </verb></tscreen>
 
 The ES server only depends on <tt>libz3950.a</tt> so you only need
-to build the Zdist software in the directory <tt/libz3950/.
+to build the zdist software in the directory <tt/libz3950/.
 
 YAZ can be found at the FTP host:
 
-<htmlurl url="ftp://130.225.252.168/index/yaz"
- name="ftp://130.225.252.168/index/yaz">
+<htmlurl url="ftp://ftp.indexdata.dk/index/yaz"
+ name="ftp://ftp.indexdata.dk/index/yaz">
 
 The ES also use GNU's regex package to parse regular expressions. 
 The ES has been tested with regex-0.12. Some systems, such as Linux,
@@ -62,25 +62,26 @@ come with the regex package preinstalled.
 
 Unpack <tt>egate.tar.gz</tt> and edit the top level <tt/Makefile/. Specify
 where the GNU regex package is located and specify whether you use
-YAZ or Zdist. One some systems, you may have to set the <tt/NETLIB/ as
+YAZ or zdist. One some systems, you may have to set the <tt/NETLIB/ as
 well.
 
 The shell variables <tt/CC/ and <tt/CFLAGS/ are used by the
 <tt/Makefile/ so you may modify these before compiling.
 
-Now, type <tt/make/. 
+Now, type <tt/make email/. 
 
 <sect>Installation
 
 <p>
-If the compilation succeeds, you should install the software.
-Edit the <tt/Makefile/ and set the LIBDIR to the installation
+If the compilation succeeds, you should install the software in some
+system location.
+Edit the <tt/Makefile/ and set EMAILLIBDIR to the installation
 directory. Since, the ES is executed by the mail system, and not by a
 user, this directory shouldn't be globally executable.
 
-When satisfied, type <tt/make install/.
+When satisfied, type <tt/make install.email/.
 
-Three executables are installed in LIBDIR:
+Three executables are installed in EMAILLIBDIR:
 <descrip>
 <tag/eti/ The email transport interface. This program receives
 incoming mail, identifies the user, and delivers the mail request
@@ -99,7 +100,7 @@ The <tt/sendmail/ or a similar program delivers the mail to the
 you create a special user and group for the ES software. In this case
 you should use <tt/chmod/ to and set the 'set user ID on execution'
 bits on the executable files and give that user read/write/execute
-permissions in LIBDIR.
+permissions in EMAILLIBDIR.
 
 The mail system needs to know about the ES. Pick some name that serves
 as the ES user and edit <tt/aliases/ used by your mail system (usually 
@@ -107,7 +108,7 @@ as the ES user and edit <tt/aliases/ used by your mail system (usually
 
 <tt>es:"|/usr/local/lib/es/eti </tt><em>options</em><tt>"</tt>
 
-In this example the mail user name is <tt/es/ and the LIBDIR is
+In this example the mail user name is <tt/es/ and the EMAILLIBDIR is
 <tt>/usr/local/lib/es</tt>.
 
 The ES system can operate with or without the monitor. When using