<?xml version="1.0" standalone="no"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1//EN"
- "http://www.oasis-open.org/docbook/xml/4.1/docbookx.dtd"
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+ "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd"
[
<!ENTITY % local SYSTEM "local.ent">
%local;
<!ENTITY % entities SYSTEM "entities.ent">
%entities;
- <!ENTITY % common SYSTEM "common/common.ent">
- %common;
+ <!ENTITY % idcommon SYSTEM "common/common.ent">
+ %idcommon;
]>
-<!-- $Id: book.xml,v 1.10 2007-04-10 15:12:51 quinn Exp $ -->
<book id="book">
<bookinfo>
<title>Pazpar2 - User's Guide and Reference</title>
<author>
<firstname>Adam</firstname><surname>Dickmeiss</surname>
</author>
+ <author>
+ <firstname>Marc</firstname><surname>Cromme</surname>
+ </author>
+ <author>
+ <firstname>Jakub</firstname><surname>Skoczen</surname>
+ </author>
+ <author>
+ <firstname>Mike</firstname><surname>Taylor</surname>
+ </author>
+ <author>
+ <firstname>Dennis</firstname><surname>Schafroth</surname>
+ </author>
<releaseinfo>&version;</releaseinfo>
<copyright>
<year>©right-year;</year>
</copyright>
<abstract>
<simpara>
- Pazpar2 is a high-performance, user interface-independent, data
- model-independent metasearching
- middleware featuring merging, relevance ranking, record sorting,
+ Pazpar2 is a high-performance metasearch engine featuring
+ merging, relevance ranking, record sorting,
and faceted results.
+ It is middleware: it has no user interface of its own, but can be
+ configured and controlled by an XML-over-HTTP web-service to provide
+ metasearching functionality behind any user interface.
</simpara>
<simpara>
- This document is a guide and reference to Pazpar version &version;.
+ This document is a guide and reference to Pazpar2 version &version;.
</simpara>
<simpara>
<inlinemediaobject>
<imageobject>
<imagedata fileref="common/id.png" format="PNG"/>
- </imageobject>
- <imageobject>
- <imagedata fileref="common/id.eps" format="EPS"/>
- </imageobject>
- </inlinemediaobject>
+ </imageobject>
+ <imageobject>
+ <imagedata fileref="common/id.eps" format="EPS"/>
+ </imageobject>
+ </inlinemediaobject>
</simpara>
</abstract>
- </bookinfo>
-
- <chapter id="introduction">
- <title>Introduction</title>
- <para>
- Pazpar2 is a stand-alone metasearch client with a webservice API, designed
- to be used either from a browser-based client (JavaScript, Flash, Java,
- etc.), from from server-side code, or any combination of the two.
- Pazpar2 is a highly optimized client designed to
- search many resources in parallel. It implements record merging,
- relevance-ranking and sorting by arbitrary data content, and facet
- analysis for browsing purposes. It is designed to be data model
- independent, and is capable of working with MARC, DublinCore, or any
- other XML-structured response format -- XSLT is used to normalize and extract
- data from retrieval records for display and analysis. It can be used
- against any server which supports the Z39.50 protocol. Proprietary
- backend modules can be used to support a large number of other protocols
- (please contact Index Data for further information about this).
- </para>
- <para>
- Additional functionality such as
- user management, attractive displays are expected to be implemented by
- applications that use pazpar2. Pazpar2 is user interface independent.
- Its functionality is exposed through a simple REST-style webservice API,
- designed to be simple to use from an Ajax-enbled browser, Flash
- animation, Java applet, etc., or from a higher-level server-side language
- like PHP or Java. Because session information can be shared between
- browser-based logic and your server-side scripting, there is tremendous
- flexibility in how you implement your business logic on top of pazpar2.
- </para>
- <para>
- Once you launch a search in pazpar2, the operation continues behind the
- scenes. Pazpar2 connects to servers, carries out searches, and
- retrieves, deduplicates, and stores results internally. Your application
- code may periodically inquire about the status of an ongoing operation,
- and ask to see records or other result set facets. Result become
- available immediately, and it is easy to build end-user interfaces which
- feel extremely responsive, even when searching more than 100 servers
- concurrently.
- </para>
- <para>
- Pazpar2 is designed to be highly configurable. Incoming records are
- normalized to XML/UTF-8, and then further normalized using XSLT to a
- simple internal representation that is suitable for analysis. By
- providing XSLT stylesheets for different kinds of result records, you
- can tune pazpar2 to work against different kinds of information
- retrieval servers. Finally, metadata is extracted, in a configurable
- way, from this internal record, to support display, merging, ranking,
- result set facets, and sorting. Pazpar2 is not bound to a specific model
- of metadata, such as DublinCore or MARC -- by providing the right
- configuration, it can work with a number of different kinds of data in
- support of many different applications.
- </para>
- <para>
- Pazpar2 is designed to be efficient and scalable. You can set it up to
- search several hundred targets in parallel, or you can use it to support
- hundreds of concurrent users. It is implemented with the same attention
- to performance and economy that we use in our indexing engines, so that
- you can focus on building your application, without worrying about the
- details of metasearch logic. You can devote all of your attention to
- usability and let pazpar2 do what it does best -- metasearch.
- </para>
- <para>
- If you wish to connect to commercial or other databases which do not
- support open standards, please contact Index Data. We have a licensing
- agreement with a third party vendor which will enable pazpar2 to access
- thousands of online databases, in addition the vast number of catalogs
- and online services that support the Z39.50 protocol.
- </para>
- <para>
- Pazpar2 is our attempt to re-think the traditional paradigms for
- implementing and deploying metasearch logic, with an uncompromising
- approach to performance, and attempting to make maximum use of the
- capabilities of modern browsers. The demo user interface that
- accompanies the distribution is but one example. If you think of new
- ways of using pazpar2, we hope you'll share them with us, and if we
- can provide assistance with regards to training, design, programming,
- integration with different backends, hosting, or support, please don't
- hesitate to contact us. If you'd like to see functionality in pazpar2
- that is not there today, please don't hesitate to contact us. It may
- already be in our development pipeline, or there might be a
- possibility for you to help out by sponsoring development time or
- code. Either way, get in touch and we will give you straight answers.
- </para>
- <para>
- Enjoy!
- </para>
- <para>
- Pazpar2 is covered by the GNU license version 2.
- See <xref linkend="license"/> for further information.
- </para>
- </chapter>
+ </bookinfo>
+
+ <chapter id="introduction">
+ <title>Introduction</title>
- <chapter id="installation">
- <title>Installation</title>
+ <section id="what.pazpar2.is">
+ <title>What Pazpar2 is</title>
+ <para>
+ Pazpar2 is a stand-alone metasearch engine with a web-service API, designed
+ to be used either from a browser-based client (JavaScript, Flash,
+ Java applet,
+ etc.), from server-side code, or any combination of the two.
+ Pazpar2 is a highly optimized client designed to
+ search many resources in parallel. It implements record merging,
+ relevance-ranking and sorting by arbitrary data content, and facet
+ analysis for browsing purposes. It is designed to be data-model
+ independent, and is capable of working with MARC, DublinCore, or any
+ other <ulink url="&url.xml;">XML</ulink>-structured response format
+ -- <ulink url="&url.xslt;">XSLT</ulink> is used to normalize and extract
+ data from retrieval records for display and analysis. It can be used
+ against any server which supports the
+ <ulink url="&url.z39.50;">Z39.50</ulink>,
+ <ulink url="&url.sru;">SRU/SRW</ulink>
+ or <ulink url="&url.solr;">Apache Solr</ulink> protocol. Proprietary
+ backend modules can function as connectors between these standard
+ protocols and any non-standard API, including web-site scraping, to
+ support a large number of other protocols.
+ </para>
+ <para>
+ Additional functionality such as
+ user management and attractive displays are expected to be implemented by
+ applications that use Pazpar2. Pazpar2 itself is user-interface independent.
+ Its functionality is exposed through a simple XML-based web-service API,
+ designed to be easy to use from an Ajax-enabled browser, Flash
+ animation, Java applet, etc., or from a higher-level server-side language
+ like PHP, Perl or Java. Because session information can be shared between
+ browser-based logic and server-side scripting, there is tremendous
+ flexibility in how you implement application-specific logic on top
+ of Pazpar2.
+ </para>
+ <para>
+ Once you launch a search in Pazpar2, the operation continues behind the
+ scenes. Pazpar2 connects to servers, carries out searches, and
+ retrieves, deduplicates, and stores results internally. Your application
+ code may periodically inquire about the status of an ongoing operation,
+ and ask to see records or result set facets. Results become
+ available immediately, and it is easy to build end-user interfaces than
+ feel extremely responsive, even when searching more than 100 servers
+ concurrently.
+ </para>
+ <para>
+ Pazpar2 is designed to be highly configurable. Incoming records are
+ normalized to XML/UTF-8, and then further normalized using XSLT to a
+ simple internal representation that is suitable for analysis. By
+ providing XSLT stylesheets for different kinds of result records, you
+ can configure Pazpar2 to work against different kinds of information
+ retrieval servers. Finally, metadata is extracted in a configurable
+ way from this internal record, to support display, merging, ranking,
+ result set facets, and sorting. Pazpar2 is not bound to a specific model
+ of metadata, such as DublinCore or MARC: by providing the right
+ configuration, it can work with any combination of different kinds of data
+ in support of many different applications.
+ </para>
+ <para>
+ Pazpar2 is designed to be efficient and scalable. You can set it up to
+ search several hundred targets in parallel, or you can use it to support
+ hundreds of concurrent users. It is implemented with the same attention
+ to performance and economy that we use in our indexing engines, so that
+ you can focus on building your application without worrying about the
+ details of metasearch logic. You can devote all of your attention to
+ usability and let Pazpar2 do what it does best -- metasearch.
+ </para>
<para>
- Pazpar2 depends on the following tools/libraries:
- <variablelist>
- <varlistentry><term><ulink url="&url.yaz;">YAZ</ulink></term>
- <listitem>
- <para>
- The popular Z39.50 toolkit for the C language. YAZ must be
- compiled with Libxml2/Libxslt support.
- </para>
- </listitem>
- </varlistentry>
- </variablelist>
+ Pazpar2 is our attempt to re-think the traditional paradigms for
+ implementing and deploying metasearch logic, with an uncompromising
+ approach to performance, and attempting to make maximum use of the
+ capabilities of modern browsers. The demo user interface that
+ accompanies the distribution is but one example. If you think of new
+ ways of using Pazpar2, we hope you'll share them with us, and if we
+ can provide assistance with regards to training, design, programming,
+ integration with different backends, hosting, or support, please don't
+ hesitate to contact us. If you'd like to see functionality in Pazpar2
+ that is not there today, please don't hesitate to contact us. It may
+ already be in our development pipeline, or there might be a
+ possibility for you to help out by sponsoring development time or
+ code. Either way, get in touch and we will give you straight answers.
</para>
<para>
- In order to compile Pazpar2 an ANSI C compiler is
- required. The requirements should be the same as for YAZ.
+ Enjoy!
</para>
+ <para>
+ Pazpar2 is covered by the GNU General Public License (GPL) version 2.
+ See <xref linkend="license"/> for further information.
+ </para>
+ </section>
- <section id="installation.unix">
- <title>Installation on Unix (from Source)</title>
- <para>
- Here is a quick step-by-step guide on how to compile the
- tools that Pazpar2 uses. Only few systems have none of the required
- tools binary packages. If, for example, Libxml2/libxslt are already
- installed as development packages use these.
- </para>
-
- <para>
- Ensure that the development libraries + header files are
- available on your system before compiling Pazpar2. For installation
- of YAZ, refer to the YAZ installation chapter.
- </para>
+ <section id="connectors">
+ <title>Connectors to non-standard databases</title>
+ <para>
+ If you need to access commercial or open access resources that don't support
+ Z39.50 or SRU, one approach would be to use a tool like <ulink
+ url="&url.simpleserver;">SimpleServer</ulink> to build a
+ gateway. An easier option is to use Index Data's <ulink
+ url="&url.mkc;">MasterKey Connect</ulink>
+ service, which will expose virtually <emphasis>any</emphasis> resource
+ through Z39.50/SRU, dead easy to integrate with Pazpar2.
+ The service is hosted, so all you have to do is to let us
+ know which resources you are interested in, and we operate the gateways,
+ or Connectors for you for a low annual charge.
+ Types of resources supported include
+ commercial databases, free online resources, and even local resources;
+ almost anything that can be accessed through a web-facing user
+ interface can be accessed in this way.
+ Contact <email>info@indexdata.com</email> for more information.
+ See <xref linkend="masterkey_connect"/> for an example.
+ </para>
+ </section>
+
+ <section id="name">
+ <title>A note on the name Pazpar2</title>
+ <para>
+ The name Pazpar2 derives from three sources. One one hand, it is
+ Index Data's second major piece of software that does parallel
+ searching of Z39.50 targets. On the other, it is a near-homophone
+ of Passpartout, the ever-helpful servant in Jules Verne's novel
+ Around the World in Eighty Days (who helpfully uses the language
+ of his master). Finally, "passe par tout" means something like
+ "passes through anything" in French -- on other words, a universal
+ solution, or if you like a MasterKey.
+ </para>
+ </section>
+ </chapter>
+
+ <chapter id="installation">
+ <title>Installation</title>
+ <para>
+ The Pazpar2 package includes documentation as well
+ as the Pazpar2 server. The package also includes a simple user
+ interface called "test1", which consists of a single HTML page and a single
+ JavaScript file to illustrate the use of Pazpar2.
+ </para>
+ <para>
+ Pazpar2 depends on the following tools/libraries:
+ <variablelist>
+ <varlistentry><term><ulink url="&url.yaz;">YAZ</ulink></term>
+ <listitem>
+ <para>
+ The popular Z39.50 toolkit for the C language.
+ YAZ <emphasis>must</emphasis> be compiled with
+ <ulink url="&url.libxml2;">Libxml2</ulink>/<ulink url="&url.libxslt;">Libxslt</ulink> support.
+ </para>
+ <para>
+ It is highly recommended that YAZ is also compiled with
+ <ulink url="&url.icu;">ICU</ulink> support.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </para>
+ <para>
+ In order to compile Pazpar2, a C compiler which supports C99 or later
+ is required.
+ </para>
+
+ <section id="installation.unix">
+ <title>Installation from source on Unix (including Linux, MacOS, etc.)</title>
+ <para>
+ The latest source code for Pazpar2 is available from
+ <ulink url="&url.pazpar2.download;"/>.
+ Most Unix-based operating systems have the required
+ tools available as binary packages.
+ For example, if Libxml2/libXSLT libraries
+ are already installed as development packages, use these.
+ </para>
+
+ <para>
+ Ensure that the development libraries and header files are
+ available on your system before compiling Pazpar2. For installation
+ of YAZ, refer to the Installation chapter of the YAZ manual at
+ <ulink url="&url.yaz.install;"/>.
+ </para>
+ <para>
+ Once the dependencies are in place, Pazpar2 can be unpacked and
+ installed as follows:
+ </para>
+ <screen>
+ tar xzf pazpar2-VERSION.tar.gz
+ cd pazpar2-VERSION
+ ./configure
+ make
+ sudo make install
+ </screen>
+ <para>
+ The <literal>make install</literal> will install manpages as well as the
+ Pazpar2 server, <literal>pazpar2</literal>,
+ in PREFIX<literal>/sbin</literal>.
+ By default, PREFIX is <literal>/usr/local/</literal> . This can be
+ changed with configure option <option>--prefix</option>.
+ </para>
+ </section>
+
+ <section id="installation.win32">
+ <title>Installation from source on Windows</title>
+ <para>
+ Pazpar2 can be built for Windows using
+ <ulink url="&url.vstudio;">Microsoft Visual Studio</ulink>.
+ The support files for building YAZ on Windows are located in the
+ <filename>win</filename> directory. The compilation is performed
+ using the <filename>win/makefile</filename> which is to be
+ processed by the NMAKE utility part of Visual Studio.
+ </para>
+ <para>
+ Ensure that the development libraries and header files are
+ available on your system before compiling Pazpar2. For installation
+ of YAZ, refer to
+ the Installation chapter of the YAZ manual at
+ <ulink url="&url.yaz.install;"/>.
+ It is easiest if YAZ and Pazpar2 are unpacked in the same
+ directory (side-by-side).
+ </para>
+ <para>
+ The compilation is tuned by editing the makefile of Pazpar2.
+ The process is similar to YAZ. Adjust the various directories
+ <literal>YAZ_DIR</literal>, <literal>ICU_DIR</literal>, etc.,
+ as required.
+ </para>
+ <para>
+ Compile Pazpar2 by invoking <application>nmake</application> in
+ the <filename>win</filename> directory.
+ The resulting binaries of the build process are located in the
+ <filename>bin</filename> of the Pazpar2 source
+ tree - including the <filename>pazpar2.exe</filename> and necessary DLLs.
+ </para>
+ <para>
+ The Windows version of Pazpar2 is a console application. It may
+ be installed as a Windows Service by adding option
+ <literal>-install</literal> for the pazpar2 program. This will
+ register Pazpar2 as a service and use the other options provided
+ in the same invocation. For example:
+ <screen>
+ cd \MyPazpar2\etc
+ ..\bin\pazpar2 -install -f pazpar2.cfg -l pazpar2.log
+ </screen>
+ The Pazpar2 service may now be controlled via the Service Control
+ Panel. It may be unregistered by passing the <literal>-remove</literal>
+ option. Example:
+ <screen>
+ cd \MyPazpar2\etc
+ ..\bin\pazpar2 -remove
+ </screen>
+ </para>
+ </section>
+
+ <section id="installation.test1">
+ <title>Installation of test interfaces</title>
+ <para>
+ In this section we show how to make available the set of simple
+ interfaces that are part of the Pazpar2 source package, and which
+ demonstrate some ways to use Pazpar2. (Note that Debian users can
+ save time by just installing the package <literal>pazpar2-test1</literal>.)
+ </para>
+ <para>
+ A web server, such as Apache, must be installed and running on the system.
+ </para>
+
+ <para>
+ Start the Pazpar2 daemon using the 'in-source' binary of the Pazpar2
+ daemon. On Unix the process is:
+ <screen>
+ cd etc
+ cp pazpar2.cfg.dist pazpar2.cfg
+ ../src/pazpar2 -f pazpar2.cfg
+ </screen>
+ And on Windows:
+ <screen>
+ cd etc
+ copy pazpar2.cfg.dist pazpar2.cfg
+ ..\bin\pazpar2 -f pazpar2.cfg
+ </screen>
+ This will start a Pazpar2 listener on port 9004. It will proxy
+ HTTP requests to port 80 on localhost, which we assume will be the regular
+ HTTP server on the system. Inspect and modify pazpar2.cfg as needed
+ if this is to be changed. The pazpar2.cfg file includes settings from the
+ file <filename>settings/edu.xml</filename>
+ to use for searches.
+ </para>
+
+ <para>
+ The test UIs are located in <literal>www</literal>. Ensure that this
+ directory is available to the web server by copying
+ <literal>www</literal> to the document root,
+ using Apache's <literal>Alias</literal> directive, or
+ creating a symbolic link: for example, on a Debian or Ubuntu
+ system with Apache2 installed from the standard package, you might
+ make the link as follows:
+ <screen>
+ cd .../pazpar2
+ sudo ln -s `pwd`/www /var/www/pazpar2-demo
+ </screen>
+ </para>
+
+ <para>
+ This makes the test applications visible at
+ <ulink url="http://localhost/pazpar2-demo/"/>
+ but they can not be run successfully from that URL, as they submit
+ search requests back to the server form which they were served,
+ and Apache2 doesn't know how to handle them. Instead, the test
+ applications must be accessed from Pazpar2 itself, acting as a
+ proxy to Apache2, at the URL
+ <ulink url="http://localhost:9004/pazpar2-demo/"/>
+ </para>
+
+ <para>
+ From here, the demo applications can be
+ accessed: <literal>test1</literal>, <literal>test2</literal> and
+ <literal>jsdemo</literal>
+ are pure HTML+JavaScript setups, needing no server-side
+ intelligence;
+ <literal>demo</literal>
+ requires PHP on the server.
+ </para>
+ <para>
+ If you don't see the test interfaces, check whether they are available
+ on port 80 (i.e. directly from the Apache2 server). If not, the
+ Apache configuration is incorrect.
+ </para>
+ <para>
+ In order to use Apache as frontend for the interface on port 80
+ for public access etc., refer to
+ <xref linkend="installation.apache2proxy"/>.
+ </para>
+ </section>
+
+ <section id="installation.debian">
+ <title>Installation on Debian GNU/Linux and Ubuntu</title>
+ <para>
+ Index Data provides Debian and Ubuntu packages for Pazpar2 and YAZ.
+ Refer to these directories:
+ <ulink url="&url.pazpar2.download;debian/"/> and
+ <ulink url="&url.pazpar2.download;ubuntu/"/>.
+ </para>
+ </section>
+
+ <section id="installation.centos">
+ <title>Installation on RedHat / CentOS</title>
+ <para>
+ Index Data provides CentOS packages for Pazpar2 and YAZ.
+ Refer to
+ <ulink url="&url.pazpar2.download;redhat/centos"/> for
+ CentOS packages.
+ </para>
+ </section>
+
+ <section id="installation.apache2proxy">
+ <title>Apache 2 Proxy</title>
+ <para>
+ Apache 2 has a
+ <ulink
+ url="http://httpd.apache.org/docs/2.2/mod/mod_proxy.html">
+ proxy module
+ </ulink>
+ which allows Pazpar2 to become a backend to an Apache 2
+ based web service. The Apache 2 proxy must operate in the
+ <emphasis>Reverse</emphasis> Proxy mode.
+ </para>
+
+ <para>
+ On a Debian based Apache 2 system, the relevant modules can
+ be enabled with:
<screen>
- gunzip -c pazpar2-version.tar.gz|tar xf -
- cd pazpar2-version
- ./configure
- make
- su
- make install
+ sudo a2enmod proxy_http proxy_balancer
</screen>
- </section>
+ </para>
- <section id="installation.debian">
- <title>Installation on Debian GNU/Linux</title>
+ <para>
+ Traditionally Pazpar2 interprets URL paths with suffix
+ <literal>/search.pz2</literal>.
+ The
+ <ulink
+ url="http://httpd.apache.org/docs/2.2/mod/mod_proxy.html#proxypass">
+ ProxyPass
+ </ulink>
+ directive of Apache must be used to map a URL path
+ the the Pazpar2 server (listening port).
+ </para>
+
+ <note>
<para>
- All dependencies for Pazpar2 are available as
- <ulink url="&url.debian;">Debian</ulink>
- packages for the sarge (stable in 2005) and etch (testing in 2005)
- distributions.
+ The ProxyPass directive takes a prefix rather than
+ a suffix as URL path. It is important that the Java Script code
+ uses the prefix given for it.
</para>
+ </note>
+
+ <example id="installation.apache2proxy.example">
+ <title>Apache 2 proxy configuration</title>
<para>
- The procedures for Debian based systems, such as
- <ulink url="&url.ubuntu;">Ubuntu</ulink> is probably similar
+ If Pazpar2 is running on port 8004 and the portal is using
+ <filename>search.pz2</filename> inside portal in directory
+ <filename>/myportal/</filename> we could use the following
+ Apache 2 configuration:
+
+ <screen><![CDATA[
+ <IfModule mod_proxy.c>
+ ProxyRequests Off
+
+ <Proxy *>
+ AddDefaultCharset off
+ Order deny,allow
+ Allow from all
+ </Proxy>
+
+ ProxyPass /myportal/search.pz2 http://localhost:8004/search.pz2
+ ProxyVia Off
+ </IfModule>
+ ]]></screen>
</para>
+ </example>
+ </section>
+
+ </chapter>
+
+ <chapter id="using">
+ <title>Using Pazpar2</title>
+ <para>
+ This chapter provides a general introduction to the use and
+ deployment of Pazpar2.
+ </para>
+
+ <section id="architecture">
+ <title>Pazpar2 and your systems architecture</title>
+ <para>
+ Pazpar2 is designed to provide asynchronous, behind-the-scenes
+ metasearching functionality to your application, exposing this
+ functionality using a simple webservice API that can be accessed
+ from any number of development environments. In particular, it is
+ possible to combine Pazpar2 either with your server-side dynamic
+ website scripting, with scripting or code running in the browser, or
+ with any combination of the two. Pazpar2 is an excellent tool for
+ building advanced, Ajax-based user interfaces for metasearch
+ functionality, but it isn't a requirement -- you can choose to use
+ Pazpar2 entirely as a backend to your regular server-side scripting.
+ When you do use Pazpar2 in conjunction
+ with browser scripting (JavaScript/Ajax, Flash, applets,
+ etc.), there are special considerations.
+ </para>
+
+ <para>
+ Pazpar2 implements a simple but efficient HTTP server, and it is
+ designed to interact directly with scripting running in the browser
+ for the best possible performance, and to limit overhead when
+ several browser clients generate numerous webservice requests.
+ However, it is still desirable to use a conventional webserver,
+ such as Apache, to serve up graphics, HTML documents, and
+ server-side scripting. Because the security sandbox environment of
+ most browser-side programming environments only allows communication
+ with the server from which the enclosing HTML page or object
+ originated, Pazpar2 is designed so that it can act as a transparent
+ proxy in front of an existing webserver (see <xref
+ linkend="pazpar2_conf"/> for details).
+ In this mode, all regular
+ HTTP requests are transparently passed through to your webserver,
+ while Pazpar2 only intercepts search-related webservice requests.
+ </para>
+
+ <para>
+ If you want to expose your combined service on port 80, you can
+ either run your regular webserver on a different port, a different
+ server, or a different IP address associated with the same server.
+ </para>
+
+ <para>
+ Pazpar2 can also work behind
+ a reverse Proxy. Refer to <xref linkend="installation.apache2proxy"/>)
+ for more information.
+ This allows your existing HTTP server to operate on port 80 as usual.
+ Pazpar2 can be started on another (internal) port.
+ </para>
+
+ <para>
+ Sometimes, it may be necessary to implement functionality on your
+ regular webserver that makes use of search results, for example to
+ implement data import functionality, emailing results, history
+ lists, personal citation lists, interlibrary loan functionality,
+ etc. Fortunately, it is simple to exchange information between
+ Pazpar2, your browser scripting, and backend server-side scripting.
+ You can send a session ID and possibly a record ID from your browser
+ code to your server code, and from there use Pazpar2s webservice API
+ to access result sets or individual records. You could even 'hide'
+ all of Pazpar2s functionality between your own API implemented on
+ the server-side, and access that from the browser or elsewhere. The
+ possibilities are just about endless.
+ </para>
+ </section>
+
+ <section id="data_model">
+ <title>Your data model</title>
+ <para>
+ Pazpar2 does not have a preconceived model of what makes up a data
+ model. There are no assumptions that records have specific fields or
+ that they are organized in any particular way. The only assumption
+ is that data comes packaged in a form that the software can work
+ with (presently, that means XML or MARC), and that you can provide
+ the necessary information to massage it into Pazpar2's internal
+ record abstraction.
+ </para>
+
+ <para>
+ Handling retrieval records in Pazpar2 is a two-step process. First,
+ you decide which data elements of the source record you are
+ interested in, and you specify any desired massaging or combining of
+ elements using an XSLT stylesheet (MARC records are automatically
+ normalized to <ulink url="&url.marcxml;">MARCXML</ulink> before this step).
+ If desired, you can run multiple XSLT stylesheets in series to accomplish
+ this, but the output of the last one should be a representation of the
+ record in a schema that Pazpar2 understands.
+ </para>
+
+ <para>
+ The intermediate, internal representation of the record looks like
+ this:
+ <screen><![CDATA[
+ <record xmlns="http://www.indexdata.com/pazpar2/1.0"
+ mergekey="title The Shining author King, Stephen">
+
+ <metadata type="title" rank="2">The Shining</metadata>
+
+ <metadata type="author">King, Stephen</metadata>
+
+ <metadata type="kind">ebook</metadata>
+ <!-- ... and so on -->
+ </record>
+]]></screen>
+
+ As you can see, there isn't much to it. There are really only a few
+ important elements to this file.
+ </para>
+
+ <para>
+ Elements should belong to the namespace
+ <literal>http://www.indexdata.com/pazpar2/1.0</literal>.
+ If the root node contains the
+ attribute 'mergekey', then every record that generates the same
+ merge key (normalized for case differences, white space, and
+ truncation) will be joined into a cluster. In other words, you
+ decide how records are merged. If you don't include a merge key,
+ records are never merged. The 'metadata' elements provide the meat
+ of the elements -- the content. the 'type' attribute is used to
+ match each element against processing rules that determine what
+ happens to the data element next. The attribute, 'rank' specifies
+ specifies a multipler for ranking for this element.
+ </para>
+
+ <para>
+ The next processing step is the extraction of metadata from the
+ intermediate representation of the record. This is governed by the
+ 'metadata' elements in the 'service' section of the configuration
+ file. See <xref linkend="config-server"/> for details. The metadata
+ in the retrieval record ultimately drives merging, sorting, ranking,
+ the extraction of browse facets, and display, all configurable.
+ </para>
+
+ <para>
+ Pazpar2 1.6.37 and later also allows already clustered records to
+ be ingested. Suppose a database already clusters for us and we would like
+ to keep that cluster for Pazpar2. In that case we can generate a
+ <literal>cluster</literal> wrapper element that holds individual
+ <literal>record</literal> elements.
+ </para>
+ <para>
+ Cluster record example:
+ <screen><![CDATA[
+ <cluster xmlns="http://www.indexdata.com/pazpar2/1.0">
+ <record>
+ <metadata type="title" rank="2">The Shining</metadata>
+ <metadata type="author">King, Stephen</metadata>
+ <metadata type="kind">ebook</metadata>
+ </record>
+ <record>
+ <metadata type="title" rank="2">The Shining</metadata>
+ <metadata type="author">King, Stephen</metadata>
+ <metadata type="kind">audio</metadata>
+ </record>
+ </cluster>
+ ]]></screen>
+ </para>
+ </section>
+
+ <section id="client">
+ <title>Client development overview</title>
+ <para>
+ You can use Pazpar2 from any environment that allows you to use
+ webservices. The initial goal of the software was to support
+ Ajax-based applications, but there literally are no limits to what
+ you can do. You can use Pazpar2 from Javascript, Flash, Java, etc.,
+ on the browser side, and from any development environment on the
+ server side, and you can pass session tokens and record IDs freely
+ around between these environments to build sophisticated applications.
+ Use your imagination.
+ </para>
+
+ <para>
+ The webservice API of Pazpar2 is described in detail in <xref
+ linkend="pazpar2_protocol"/>.
+ </para>
+
+ <para>
+ In brief, you use the 'init' command to create a session, a
+ temporary workspace which carries information about the current
+ search. You start a new search using the 'search' command. Once the
+ search has been started, you can follow its progress using the
+ 'stat', 'bytarget', 'termlist', or 'show' commands. Detailed records
+ can be fetched using the 'record' command.
+ </para>
+ </section>
+
+ §-ajaxdev;
+
+ <section id="unicode">
+ <title>Unicode Compliance</title>
+ <para>
+ Pazpar2 is Unicode compliant and language and locale aware but relies
+ on character encoding for the targets to be specified correctly if
+ the targets themselves are not UTF-8 based (most aren't).
+ Just a few bad behaving targets can spoil the search experience
+ considerably if for example Greek, Russian or otherwise non 7-bit ASCII
+ search terms are entered. In these cases some targets return
+ records irrelevant to the query, and the result screens will be
+ cluttered with noise.
+ </para>
+ <para>
+ While noise from misbehaving targets can not be removed, it can
+ be reduced using truly Unicode based ranking. This is an
+ option which is available to the system administrator if ICU
+ support is compiled into YAZ, see
+ <xref linkend="installation"/> for details.
+ </para>
+ <para>
+ In addition, the ICU tokenization and normalization rules must
+ be defined in the master configuration file described in
+ <xref linkend="config-server"/>.
+ </para>
+ </section>
+
+ <section id="load_balancing">
+ <title>Load balancing</title>
+ <para>
+ Just like any web server, Pazpar2, can be load balanced by a standard
+ hardware or software load balancer as long as the session stickiness
+ is ensured. If you are already running the Apache2 web server in front
+ of Pazpar2 and use the apache mod_proxy module to 'relay' client
+ requests to Pazpar2, this set up can be easily extended to include
+ load balancing capabilites.
+ To do so you need to enable the
+ <ulink url="http://httpd.apache.org/docs/2.2/mod/mod_proxy_balancer.html">
+ mod_proxy_balance
+ </ulink>
+ module in your Apache2 installation.
+ </para>
+
+ <para>
+ On a Debian based Apache 2 system, the relevant modules can
+ be enabled with:
<screen>
- apt-get install libyaz-dev
+ sudo a2enmod proxy_http
</screen>
- <para>
- With these packages installed, the usual configure + make
- procedure can be used for Pazpar2 as outlined in
- <xref linkend="installation.unix"/>.
- </para>
- </section>
- </chapter>
+ </para>
+
+ <para>
+ The mod_proxy_balancer can pass all 'sessionsticky' requests to the
+ same backend worker as long as the requests are marked with the
+ originating worker's ID (called 'route'). If the Pazpar2 serverID is
+ configured (by setting an 'id' attribute on the 'server' element in
+ the Pazpar2 configuration file) Pazpar2 will append it to the
+ 'session' element returned during the 'init' in a mod_proxy_balancer
+ compatible manner.
+ Since the 'session' is then re-sent by the client (for all pazpar2
+ request besides 'init'), the balancer can use the marker to pass
+ the request to the right route. To do so the balancer needs to be
+ configured to inspect the 'session' parameter.
+ </para>
- <chapter id="using">
- <title>Using pazpar2</title>
+ <example id="load_balancing.example">
+ <title>Apache 2 load balancing configuration</title>
<para>
- This chapter provides a general introduction to the use and deployment of pazpar2.
+ Having 4 Pazpar2 instances running on the same host, port range of
+ 8004-8007 and serverIDs of: pz1, pz2, pz3 and pz4 respectively we
+ could use the following Apache 2 configuration to expose a single
+ pazpar2 'endpoint' on a standard
+ (<filename>/pazpar2/search.pz2</filename>) location:
+
+ <screen><![CDATA[
+ <Proxy *>
+ AddDefaultCharset off
+ Order deny,allow
+ Allow from all
+ </Proxy>
+ ProxyVia Off
+
+ # 'route' has to match the configured pazpar2 server ID
+ <Proxy balancer://pz2cluster>
+ BalancerMember http://localhost:8004 route=pz1
+ BalancerMember http://localhost:8005 route=pz2
+ BalancerMember http://localhost:8006 route=pz3
+ BalancerMember http://localhost:8007 route=pz4
+ </Proxy>
+
+ # route is resent in the 'session' param which has the form:
+ # 'sessid.serverid', understandable by the mod_proxy_load_balancer
+ # this is not going to work if the client tampers with the 'session' param
+ ProxyPass /pazpar2/search.pz2 balancer://pz2cluster lbmethod=byrequests stickysession=session nofailover=On
+ ]]></screen>
+
+ The 'ProxyPass' line sets up a reverse proxy for request
+ ‘/pazpar2/search.pz2’ and delegates all requests to the load balancer
+ (virtual worker) with name ‘pz2cluster’.
+ Sticky sessions are enabled and implemented using the ‘session’ parameter.
+ The ‘Proxy’ section lists all the servers (real workers) which the
+ load balancer can use.
</para>
- <section id="architecture">
- <title>Pazpar2 and your systems architecture</title>
- <para>
- Pazpar2 is designed to provide asynchronous, behind-the-scenes
- metasearching functionality to your application, exposing this
- functionality using a simple webservice API that can be accessed
- from any number of development environments. In particular, it is
- possible to combine pazpar2 either with your server-side dynamic
- website scripting, with scripting or code running in the browser, or
- with any combination of the two. Pazpar2 is an excellent tool for
- building advanced, Ajax-based user interfaces for metasearch
- functionality, but it isn't a requirement -- you can choose to use
- pazpar2 entirely as a backend to your regular server-side scripting.
- When you do use pazpar2 in conjunction
- with browser scripting (JavaScript/Ajax, Flash, applets, etc.), there are
- special considerations.
- </para>
-
- <para>
- Pazpar2 implements a simple but efficient HTTP server, and it is
- designed to interact directly with scripting running in the browser
- for the best possible performance, and to limit overhead when
- several browser clients generate numerous webservice requests.
- However, it is still desirable to use a conventional webserver,
- such as Apache, to serve up graphics, HTML documents, and
- server-side scripting. Because the security sandbox environment of
- most browser-side programming environments only allows communication
- with the server from which the enclosing HTML page or object
- originated, pazpar2 is designed so that it can act as a transparent
- proxy in front of an existing webserver (see <xref
- linkend="pazpar2_conf"/> for details). In this mode, all regular
- HTTP requests are transparently passed through to your webserver,
- while pazpar2 only intercepts search-related webservice requests.
- </para>
-
- <para>
- If you want to expose your combined service on port 80, you can
- either run your regular webserver on a different port, a different
- server, or a different IP address associated with the same server.
- </para>
-
- <para>
- Sometimes, it may be necessary to implement functionality on your
- regular webserver that makes use of search results, for example to
- implement data import functionality, emailing results, history
- lists, personal citation lists, interlibrary loan functionality
- ,etc. Fortunately, it is simple to exchange information between
- pazpar2, your browser scripting, and backend server-side scripting.
- You can send a session ID and possibly a record ID from your browser
- code to your server code, and from there use pazpar2s webservice API
- to access result sets or individual records. You could even 'hide'
- all of pazpar2s functionality between your own API implemented on
- the server-side, and access that from the browser or elsewhere. The
- possibilities are just about endless.
- </para>
- </section>
-
- <section id="data_model">
- <title>Your data model</title>
- <para>
- Pazpar2 does not have a preconceived model of what makes up a data
- model. There are no assumption that records have specific fields or
- that they are organized in any particular way. The only assumption
- is that data comes packaged in a form that the software can work
- with (presently, that means XML or MARC), and that you can provide
- the necessary information to massage it into pazpar2's internal
- record abstraction.
- </para>
-
- <para>
- Handling retrieval records in pazpar2 is a two-step process. First,
- you decide which data elements of the source record you are
- interested in, and you specify any desired massaging or combining of
- elements using an XSLT stylesheet (MARC records are automatically
- normalized to MARCXML before this step). If desired, you can run
- multiple XSLT stylesheets in series to accomplish this, but the
- output of the last one should be a representation of the record in a
- schema that pazpar2 understands.
- </para>
-
- <para>
- The intermediate, internal representation of the record looks like
- this:
- <screen><![CDATA[
-<record xmlns="http://www.indexdata.com/pazpar2/1.0"
- mergekey="title The Shining author King, Stephen">
-
- <metadata type="title">The Shining</metadata>
-
- <metadata type="author">King, Stephen</metadata>
-
- <metadata type="kind">ebook</metadata>
-
- <!-- ... and so on -->
-</record>
-]]></screen>
+ </example>
- As you can see, there isn't much to it. There are really only a few
- important elements to this file.
- </para>
-
- <para>
- Elements should belong to the namespace
- http://www.indexdata.com/pazpar2/1.0. If the root node contains the
- attribute 'mergekey', then every record that generates the same
- merge key (normalized for case differences, white space, and
- truncation) will be joined into a cluster. In other words, you
- decide how records are merged. If you don't include a merge key,
- records are never merged. The 'metadata' elements provide the meat
- of the elements -- the content. the 'type' attribute is used to
- match each element against processing rules that determine what
- happens to the data element next.
- </para>
-
- <para>
- The next processing step is the extraction of metadata from the
- intermediate representation of the record. This is governed by the
- 'metadata' elements in the 'service' section of the configuration
- file. See <xref linkend="config-server"/> for details. The metadata
- in the retrieval record ultimately drives merging, sorting, ranking,
- the extraction of browse facets, and display, all configurable.
- </para>
- </section>
-
- <section id="client">
- <title>Client development</title>
- <para>
- You can use pazpar2 from any environment that allows you to use
- webservices. The initial goal of the software was to support
- Ajax-based applications, but there literally are no limits to what
- you can do. You can use pazpar2 from Javascript, Flash, Java, etc.,
- on the browser side, and from any development environment on the
- server side, and you can pass session tokens and record IDs freely
- around between these environments to build sophisticated applications.
- Use your imagination.
- </para>
-
- <para>
- The webservice API of pazpar2 is described in detail in <xref
- linkend="pazpar2_protocol"/>.
- </para>
-
- <para>
- In brief, you use the 'init' command to create a session, a
- temporary workspace which carries information about the current
- search. You start a new search using the 'search' command. Once the
- search has been started, you can follow its progress using the
- 'stat', 'bytarget', 'termlist', or 'show' commands. Detailed records
- can be fetched using the 'record' command.
- </para>
- </section>
-
- <section id="nonstandard">
- <title>Connecting to non-standard resources</title>
- <para>
- Pazpar2 uses Z39.50 as its switchboard language -- i.e. as far as it
- is concerned, all resources speak Z39.50. It is, however, equipped
- to handle a broad range of different server behavior, through
- configurable query mapping and record normalization. If you develop
- configuration, stylesheets, etc., for a new type of resources, we
- encourage you to share your work.
- </para>
-
- <para>
- For a growing number of resources, Z39.50 is all you need. Over the
- last few years, a number of commercial, full-text resources have
- implemented Z39.50. These can be used through pazpar2 with little or
- no effort. Resources that use non-standard record formats will
- require a bit of XSLT work, but that's all.
- </para>
-
- <para>
- But what about resources that don't support Z39.50 at all? The NISO
- SRU protocol is slowly gathering steam. Other resources might
- support OpenSearch, private, XML/HTTP-based protocols, or something
- else entirely. Some databases exist only as web user interfaces and
- will require screen-scraping. Still others exist only as static
- files, or perhaps as databases supporting the OAI-PMH protocol.
- There is hope! Read on.
- </para>
- </section>
- </chapter> <!-- Using pazpar2 -->
+ </section>
- <reference id="reference">
- <title>Reference</title>
- <partintro>
+ <section id="relevance_ranking">
+ <title>Relevance ranking</title>
<para>
- The material in this chapter is drawn directly from the individual
- manual entries.
+ Pazpar2 uses a variant of the fterm frequency–inverse document frequency
+ (Tf-idf) ranking algorithm.
</para>
- </partintro>
- &manref;
- </reference>
+ <para>
+ The Tf-part is straightforward to calculate and is based on the
+ documents that Pazpar2 fetches. The idf-part, however, is more tricky
+ since the corpus at hand is ONLY the relevant documents and not
+ irrelevant ones. Pazpar2 does not have the full corpus -- only the
+ documents that match a particular search.
+ </para>
+ <para>
+ Computatation of the Tf-part is based on the normalized documents.
+ The length, the position and terms are thus normalized at this point.
+ Also the computation if performed for each document received from the
+ target - before merging takes place. The result of a TF-compuation is
+ added to the TF-total of a cluster. Thus, if a document occurs twice,
+ then the TF-part is doubled. That, however, can be adjusted, because the
+ TF-part may be divided by the number of documents in a cluster.
+ </para>
+ <para>
+ The algorithm used by Pazpar2 has two phases. In phase one
+ Pazpar2 computes a tf-array .. This is being done as records are
+ fetched form the database. In this case, the rank weigth
+ <literal>w</literal>, the and rank tweaks <literal>lead</literal>,
+ <literal>follow</literal> and <literal>length</literal>.
- <appendix id="license"><title>License</title>
-
- <section id="gpl"><title>GPL</title>
-
+ </para>
+ <screen><![CDATA[
+ tf[1,2,..N] = 0;
+ foreach document in a cluster
+ foreach field
+ w[1,2,..N] = 0;
+ for i = 1, .. N: (each term)
+ foreach pos (where term i occurs in field)
+ // w is configured weight for field
+ // pos is position of term in field
+ w[i] += w / (1 + log2(1+lead*pos))
+ if (d > 0)
+ w[i] += w[i] * follow / (1+log2(d)
+ // length: length of field (number of terms that is)
+ if (length strategy is "linear")
+ tf[i] += w[i] / length;
+ else if (length strategy is "log")
+ tf[i] += w[i] / log2(length);
+ else if (length strategy is "none")
+ tf[i] += w[i];
+ ]]></screen>
<para>
- Pazpar2,
- Copyright © ©right-year; Index Data.
+ In phase two, the idf-array is computed and the final score
+ is computed. This is done for each cluster as part of each show command.
+ The rank tweak <literal>cluster</literal> is in use here.
</para>
-
+ <screen><![CDATA[
+ // dococcur[i]: number of records where term occurs
+ // doctotal: number of records
+ for i = 1, .., N (each term)
+ if (dococcur[i] > 0)
+ idf[i] = log(1 + doctotal / dococcur[i])
+ else
+ idf[i] = 0;
+
+ relevance = 0;
+ for i = 1, .., N: (each term)
+ if (cluster is "yes")
+ tf[i] = tf[i] / cluster_size;
+ relevance += 100000 * tf[i] / idf[i];
+ ]]></screen>
<para>
- Pazpar2 is free software; you can redistribute it and/or modify it under
- the terms of the GNU General Public License as published by the Free
- Software Foundation; either version 2, or (at your option) any later
- version.
+ For controlling the ranking parameters, refer to the
+ <link linkend="service-rank">rank</link> element of the
+ service definition.
+ Refer to the <link linkend="metadata-rank">rank</link> attribute
+ of the metadata element for how to control ranking for individual
+ metadata fields.
</para>
-
+ </section> <!-- relevance_ranking -->
+
+ <section id="masterkey_connect">
+ <title>Pazpar2 and MasterKey Connect</title>
<para>
- Pazpar2 is distributed in the hope that it will be useful, but WITHOUT ANY
- WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
+ MasterKey Connect is a hosted connector, or gateway, service that exposes
+ whatever searchable resources you need. Since the service exposes all
+ resources using Z39.50 (or SRU), it is easy to set up Pazpar2 to use the
+ service. In particular, since all connectors expose basically the same core
+ behavior, it is a good use of Pazpar2's mechanism for managing default
+ behaviors across similar databases.
</para>
-
<para>
- You should have received a copy of the GNU General Public License
- along with Pazpar2; see the file LICENSE. If not, write to the
- Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ After installation of Pazpar2, the directory
+ <filename>/etc/pazpar2/settings/mkc</filename> (location may
+ vary depending on installation preferences) contains an example setup that
+ searches two different resources through a MasterKey Connect demo account.
+ The file mkc.xml contains default parameters that will work for all
+ MasterKey Connect resources (if you decide to become a customer of the
+ service, you will substitute your own account credentials for
+ the guest/guest). The other files contain specific information about
+ a couple of demonstration resources.
+ </para>
+
+ <para>
+ To play with the demo, just create a symlink from
+ <filename>/etc/pazpar2/services-enabled/default.xml</filename>
+ to <filename>/etc/pazpar2/services-available/mkc.xml</filename>.
+ And restart Pazpar2. You should now be able to search the two demo
+ resources using JSDemo or any user interface of your choice.
+ If you are interested in learning more about MasterKey Connect, or to
+ try out the service for free against your favorite online resource, just
+ contact us at <email>info@indexdata.com</email>.
</para>
-
- <screen>
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
- </screen>
</section>
+
+ </chapter> <!-- Using Pazpar2 -->
+
+ <reference id="reference">
+ <title>Reference</title>
+ <partintro id="reference-introduction">
+ <para>
+ The material in this chapter is drawn directly from the individual
+ manual entries.
+ </para>
+ </partintro>
+ &manref;
+ </reference>
+
+ <appendix id="license">
+ <title>License</title>
+
+ <para>
+ Pazpar2,
+ Copyright © ©right-year; Index Data.
+ </para>
+
+ <para>
+ Pazpar2 is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+ </para>
+
+ <para>
+ Pazpar2 is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+ </para>
+
+ <para>
+ You should have received a copy of the GNU General Public License
+ along with Pazpar2; see the file LICENSE. If not, write to the
+ Free Software Foundation,
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ </para>
+
</appendix>
+ &gpl2;
+
</book>
- <!-- Keep this comment at the end of the file
- Local variables:
- mode: sgml
- sgml-omittag:t
- sgml-shorttag:t
- sgml-minimize-attributes:nil
- sgml-always-quote-attributes:t
- sgml-indent-step:1
- sgml-indent-data:t
- sgml-parent-document: nil
- sgml-local-catalogs: nil
- sgml-namecase-general:t
- End:
- -->
+<!-- Keep this comment at the end of the file
+Local variables:
+mode: nxml
+nxml-child-indent: 1
+End:
+-->
projects / pazpar2-moved-to-github.git / blobdiff