Remove vestigal Solr 4 binaries and configuration. Remove zookeeper configuration...

diff --git a/Changes b/Changes
index 28fdd13..ebbe0f3 100644 (file)
--- a/Changes
+++ b/Changes
@@ -1,6 +1,10 @@
-1.0  [IN PROGRESS]
-       - Documentation updates
-       - Clean up unused files
+0.10  [IN PROGRESS]
+        - Documentation updates
+        - Clean up unused files
+         - schema/solrconfig updates for Solr 5
+         - Includes Solr 5.5.1
+         - Remove RHEL packaging
+         - Rebuild Debian packaging

 
 0.9  Thu Oct 22 12:35:00 UTC 2015
        - Includes SOLR 4.9.1
 
 0.9  Thu Oct 22 12:35:00 UTC 2015
        - Includes SOLR 4.9.1

diff --git a/IDMETA b/IDMETA
index 024f82a..9a3806e 100644 (file)
--- a/IDMETA
+++ b/IDMETA
@@ -1,4 +1,4 @@
 NAME=masterkey-lui-solr
 NAME=masterkey-lui-solr

-VERSION=0.9
-DEBIAN_DIST="jessie squeeze wheezy"
+VERSION=0.10
+DEBIAN_DIST="jessie wheezy"

 UBUNTU_DIST=""
 UBUNTU_DIST=""

diff --git a/dist/install_solr_service.sh b/dist/install_solr_service.sh
new file mode 100755 (executable)
index 0000000..c91777a
--- /dev/null
+++ b/dist/install_solr_service.sh
@@ -0,0 +1,330 @@
+#!/usr/bin/env bash
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+if [[ $EUID -ne 0 ]]; then
+  echo -e "\nERROR: This script must be run as root\n" 1>&2
+  exit 1
+fi
+
+print_usage() {
+  ERROR_MSG="$1"
+
+  if [ "$ERROR_MSG" != "" ]; then
+    echo -e "\nERROR: $ERROR_MSG\n" 1>&2
+  fi
+
+  echo ""
+  echo "Usage: install_solr_service.sh path_to_solr_distribution_archive OPTIONS"
+  echo ""
+  echo "  The first argument to the script must be a path to a Solr distribution archive, such as solr-5.0.0.tgz"
+  echo "    (only .tgz or .zip are supported formats for the archive)"
+  echo ""
+  echo "  Supported OPTIONS include:"
+  echo ""
+  echo "    -d     Directory for live / writable Solr files, such as logs, pid files, and index data; defaults to /var/solr"
+  echo ""
+  echo "    -i     Directory to extract the Solr installation archive; defaults to /opt/"
+  echo "             The specified path must exist prior to using this script."
+  echo ""
+  echo "    -p     Port Solr should bind to; default is 8983"
+  echo ""
+  echo "    -s     Service name; defaults to solr"
+  echo ""
+  echo "    -u     User to own the Solr files and run the Solr process as; defaults to solr"
+  echo "             This script will create the specified user account if it does not exist."
+  echo ""
+  echo "    -f     Upgrade Solr. Overwrite symlink and init script of previous installation."
+  echo ""
+  echo " NOTE: Must be run as the root user"
+  echo ""
+} # end print_usage
+
+if [ -f "/proc/version" ]; then
+  proc_version=`cat /proc/version`
+else
+  proc_version=`uname -a`
+fi
+
+if [[ $proc_version == *"Debian"* ]]; then
+  distro=Debian
+elif [[ $proc_version == *"Red Hat"* ]]; then
+  distro=RedHat
+elif [[ $proc_version == *"Ubuntu"* ]]; then
+  distro=Ubuntu
+elif [[ $proc_version == *"SUSE"* ]]; then
+  distro=SUSE
+else
+  echo -e "\nERROR: Your Linux distribution ($proc_version) not supported by this script!\nYou'll need to setup Solr as a service manually using the documentation provided in the Solr Reference Guide.\n" 1>&2
+  exit 1
+fi
+
+if [ -z "$1" ]; then
+  print_usage "Must specify the path to the Solr installation archive, such as solr-5.0.0.tgz"
+  exit 1
+fi
+
+SOLR_ARCHIVE=$1
+if [ ! -f "$SOLR_ARCHIVE" ]; then
+  print_usage "Specified Solr installation archive $SOLR_ARCHIVE not found!"
+  exit 1
+fi
+
+# strip off path info
+SOLR_INSTALL_FILE=${SOLR_ARCHIVE##*/}
+is_tar=true
+if [ ${SOLR_INSTALL_FILE: -4} == ".tgz" ]; then
+  SOLR_DIR=${SOLR_INSTALL_FILE%.tgz}
+elif [ ${SOLR_INSTALL_FILE: -4} == ".zip" ]; then
+  SOLR_DIR=${SOLR_INSTALL_FILE%.zip}
+  is_tar=false
+else
+  print_usage "Solr installation archive $SOLR_ARCHIVE is invalid, expected a .tgz or .zip file!"
+  exit 1
+fi
+
+if [ $# -gt 1 ]; then
+  shift
+  while true; do
+    case $1 in
+        -i)
+            if [[ -z "$2" || "${2:0:1}" == "-" ]]; then
+              print_usage "Directory path is required when using the $1 option!"
+              exit 1
+            fi
+            SOLR_EXTRACT_DIR=$2
+            shift 2
+        ;;
+        -d)
+            if [[ -z "$2" || "${2:0:1}" == "-" ]]; then
+              print_usage "Directory path is required when using the $1 option!"
+              exit 1
+            fi
+            SOLR_VAR_DIR="$2"
+            shift 2
+        ;;
+        -u)
+            if [[ -z "$2" || "${2:0:1}" == "-" ]]; then
+              print_usage "Username is required when using the $1 option!"
+              exit 1
+            fi
+            SOLR_USER="$2"
+            shift 2
+        ;;
+        -s)
+            if [[ -z "$2" || "${2:0:1}" == "-" ]]; then
+              print_usage "Service name is required when using the $1 option!"
+              exit 1
+            fi
+            SOLR_SERVICE="$2"
+            shift 2
+        ;;
+        -p)
+            if [[ -z "$2" || "${2:0:1}" == "-" ]]; then
+              print_usage "Port is required when using the $1 option!"
+              exit 1
+            fi
+            SOLR_PORT="$2"
+            shift 2
+        ;;
+        -f)
+            SOLR_UPGRADE="YES"
+            shift 1
+        ;;
+        -help|-usage)
+            print_usage ""
+            exit 0
+        ;;
+        --)
+            shift
+            break
+        ;;
+        *)
+            if [ "$1" != "" ]; then
+              print_usage "Unrecognized or misplaced argument: $1!"
+              exit 1
+            else
+              break # out-of-args, stop looping
+            fi
+        ;;
+    esac
+  done
+fi
+
+if [ -z "$SOLR_EXTRACT_DIR" ]; then
+  SOLR_EXTRACT_DIR=/opt
+fi
+
+if [ ! -d "$SOLR_EXTRACT_DIR" ]; then
+  print_usage "Installation directory $SOLR_EXTRACT_DIR not found! Please create it before running this script."
+  exit 1
+fi
+
+if [ -z "$SOLR_SERVICE" ]; then
+  SOLR_SERVICE=solr
+fi
+
+if [ -z "$SOLR_VAR_DIR" ]; then
+  SOLR_VAR_DIR="/var/$SOLR_SERVICE"
+fi
+
+if [ -z "$SOLR_USER" ]; then
+  SOLR_USER=solr
+fi
+
+if [ -z "$SOLR_PORT" ]; then
+  SOLR_PORT=8983
+fi
+
+if [ -z "$SOLR_UPGRADE" ]; then
+  SOLR_UPGRADE=NO
+fi
+
+if [ ! "$SOLR_UPGRADE" = "YES" ]; then
+  if [ -f "/etc/init.d/$SOLR_SERVICE" ]; then
+    print_usage "/etc/init.d/$SOLR_SERVICE already exists! Perhaps Solr is already setup as a service on this host? To upgrade Solr use the -f option."
+    exit 1
+  fi
+
+  if [ -e "$SOLR_EXTRACT_DIR/$SOLR_SERVICE" ]; then
+    print_usage "$SOLR_EXTRACT_DIR/$SOLR_SERVICE already exists! Please move this directory / link or choose a different service name using the -s option."
+    exit 1
+  fi
+fi
+
+# stop running instance
+if [ -f "/etc/init.d/$SOLR_SERVICE" ]; then
+  echo -e "\nStopping Solr instance if exists ...\n"
+  service "$SOLR_SERVICE" stop
+fi
+
+# create user if not exists
+solr_uid="`id -u "$SOLR_USER"`"
+if [ $? -ne 0 ]; then
+  echo "Creating new user: $SOLR_USER"
+  if [ "$distro" == "RedHat" ]; then
+    adduser "$SOLR_USER"
+  elif [ "$distro" == "SUSE" ]; then
+    useradd -m "$SOLR_USER"
+  else
+    adduser --system --shell /bin/bash --group --disabled-password --home "$SOLR_VAR_DIR" "$SOLR_USER"
+  fi
+fi
+
+# extract
+SOLR_INSTALL_DIR="$SOLR_EXTRACT_DIR/$SOLR_DIR"
+if [ ! -d "$SOLR_INSTALL_DIR" ]; then
+
+  echo -e "\nExtracting $SOLR_ARCHIVE to $SOLR_EXTRACT_DIR\n"
+
+  if $is_tar ; then
+    tar zxf "$SOLR_ARCHIVE" -C "$SOLR_EXTRACT_DIR"
+  else
+    unzip -q "$SOLR_ARCHIVE" -d "$SOLR_EXTRACT_DIR"
+  fi
+
+  if [ ! -d "$SOLR_INSTALL_DIR" ]; then
+    echo -e "\nERROR: Expected directory $SOLR_INSTALL_DIR not found after extracting $SOLR_ARCHIVE ... script fails.\n" 1>&2
+    exit 1
+  fi
+
+  chown -R root: "$SOLR_INSTALL_DIR"
+  find "$SOLR_INSTALL_DIR" -type d -print0 | xargs -0 chmod 0755
+  find "$SOLR_INSTALL_DIR" -type f -print0 | xargs -0 chmod 0644
+  chmod -R 0755 "$SOLR_INSTALL_DIR/bin"
+else
+  echo -e "\nWARNING: $SOLR_INSTALL_DIR already exists! Skipping extract ...\n"
+fi
+
+# create a symlink for easier scripting
+if [ -h "$SOLR_EXTRACT_DIR/$SOLR_SERVICE" ]; then
+  echo -e "\nRemoving old symlink $SOLR_EXTRACT_DIR/$SOLR_SERVICE ...\n"
+  rm "$SOLR_EXTRACT_DIR/$SOLR_SERVICE"
+fi
+if [ -e "$SOLR_EXTRACT_DIR/$SOLR_SERVICE" ]; then
+  echo -e "\nWARNING: $SOLR_EXTRACT_DIR/$SOLR_SERVICE is not symlink! Skipping symlink update ...\n"
+else
+  echo -e "\nInstalling symlink $SOLR_EXTRACT_DIR/$SOLR_SERVICE -> $SOLR_INSTALL_DIR ...\n"
+  ln -s "$SOLR_INSTALL_DIR" "$SOLR_EXTRACT_DIR/$SOLR_SERVICE"
+fi
+
+# install init.d script
+echo -e "\nInstalling /etc/init.d/$SOLR_SERVICE script ...\n"
+cp "$SOLR_INSTALL_DIR/bin/init.d/solr" "/etc/init.d/$SOLR_SERVICE"
+chmod 0744 "/etc/init.d/$SOLR_SERVICE"
+chown root: "/etc/init.d/$SOLR_SERVICE"
+# do some basic variable substitution on the init.d script
+sed_expr1="s#SOLR_INSTALL_DIR=.*#SOLR_INSTALL_DIR=\"$SOLR_EXTRACT_DIR/$SOLR_SERVICE\"#"
+sed_expr2="s#SOLR_ENV=.*#SOLR_ENV=\"/etc/default/$SOLR_SERVICE.in.sh\"#"
+sed_expr3="s#RUNAS=.*#RUNAS=\"$SOLR_USER\"#"
+sed_expr4="s#Provides:.*#Provides: $SOLR_SERVICE#"
+sed -i -e "$sed_expr1" -e "$sed_expr2" -e "$sed_expr3" -e "$sed_expr4" "/etc/init.d/$SOLR_SERVICE"
+
+# install/move configuration
+if [ ! -d /etc/default ]; then
+  mkdir /etc/default
+  chown root: /etc/default
+  chmod 0755 /etc/default
+fi
+if [ -f "$SOLR_VAR_DIR/solr.in.sh" ]; then
+  echo -e "\nMoving existing $SOLR_VAR_DIR/solr.in.sh to /etc/default/$SOLR_SERVICE.in.sh ...\n"
+  mv "$SOLR_VAR_DIR/solr.in.sh" "/etc/default/$SOLR_SERVICE.in.sh"
+elif [ -f "/etc/default/$SOLR_SERVICE.in.sh" ]; then
+  echo -e "\n/etc/default/$SOLR_SERVICE.in.sh already exist. Skipping install ...\n"
+else
+  echo -e "\nInstalling /etc/default/$SOLR_SERVICE.in.sh ...\n"
+  cp "$SOLR_INSTALL_DIR/bin/solr.in.sh" "/etc/default/$SOLR_SERVICE.in.sh"
+  echo "SOLR_PID_DIR=\"$SOLR_VAR_DIR\"
+SOLR_HOME=\"$SOLR_VAR_DIR/data\"
+LOG4J_PROPS=\"$SOLR_VAR_DIR/log4j.properties\"
+SOLR_LOGS_DIR=\"$SOLR_VAR_DIR/logs\"
+SOLR_PORT=\"$SOLR_PORT\"
+" >> "/etc/default/$SOLR_SERVICE.in.sh"
+fi
+chown root: "/etc/default/$SOLR_SERVICE.in.sh"
+chmod 0644 "/etc/default/$SOLR_SERVICE.in.sh"
+
+# install data directories and files
+mkdir -p "$SOLR_VAR_DIR/data"
+mkdir -p "$SOLR_VAR_DIR/logs"
+if [ -f "$SOLR_VAR_DIR/data/solr.xml" ]; then
+  echo -e "\n$SOLR_VAR_DIR/data/solr.xml already exists. Skipping install ...\n"
+else
+  cp "$SOLR_INSTALL_DIR/server/solr/solr.xml" "$SOLR_VAR_DIR/data/solr.xml"
+fi
+if [ -f "$SOLR_VAR_DIR/log4j.properties" ]; then
+  echo -e "\n$SOLR_VAR_DIR/log4j.properties already exists. Skipping install ...\n"
+else
+  cp "$SOLR_INSTALL_DIR/server/resources/log4j.properties" "$SOLR_VAR_DIR/log4j.properties"
+  sed_expr="s#solr.log=.*#solr.log=\${solr.solr.home}/../logs#"
+  sed -i -e "$sed_expr" "$SOLR_VAR_DIR/log4j.properties"
+fi
+chown -R "$SOLR_USER:" "$SOLR_VAR_DIR"
+find "$SOLR_VAR_DIR" -type d -print0 | xargs -0 chmod 0750
+find "$SOLR_VAR_DIR" -type f -print0 | xargs -0 chmod 0640
+
+# configure autostart of service
+if [[ "$distro" == "RedHat" || "$distro" == "SUSE" ]]; then
+  chkconfig "$SOLR_SERVICE" on
+else
+  update-rc.d "$SOLR_SERVICE" defaults
+fi
+
+# start service
+service "$SOLR_SERVICE" start
+sleep 5
+service "$SOLR_SERVICE" status
+
+echo "Service $SOLR_SERVICE installed."

diff --git a/dist/solr-4.9.1.war b/dist/solr-4.9.1.war
deleted file mode 100644 (file)
index 3036290..0000000
Binary files a/dist/solr-4.9.1.war and /dev/null differ

diff --git a/dist/solr-5.5.1.tgz b/dist/solr-5.5.1.tgz
new file mode 100644 (file)
index 0000000..2b4ccf0
Binary files /dev/null and b/dist/solr-5.5.1.tgz differ

diff --git a/etc/init.d/indexdata-solr-zookeeper b/etc/init.d/indexdata-solr-zookeeper
deleted file mode 100755 (executable)
index 05187eb..0000000
--- a/etc/init.d/indexdata-solr-zookeeper
+++ /dev/null
@@ -1,103 +0,0 @@
-#! /bin/sh
-#
-# skeleton     example file to build /etc/init.d/ scripts.
-#              This file should be used to construct scripts for /etc/init.d.
-#
-#              Written by Miquel van Smoorenburg <miquels@cistron.nl>.
-#              Modified for Debian GNU/Linux
-#              by Ian Murdock <imurdock@gnu.ai.mit.edu>.
-#
-# Version:     @(#)skeleton  1.8  03-Mar-1998  miquels@cistron.nl
-
-### BEGIN INIT INFO
-# Provides:          indexdata-solr
-# Required-Start:    $network
-# Required-Stop:     $network
-# Should-Start:      
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: Indexdata Cloud Solr (Solr with Zookeeper)
-# Description:       startes the services on port xxxx
-### END INIT INFO
-#
-
-PATH=/usr/bin
-DAEMON=/usr/share/masterkey/lui/solr4/zookeeper/zookeeper.sh
-SERVICES=""
-DESC="Index Data Services (SOLR Zookeeper)"
-NAME=indexdata-solr-zookeeper
-DEFAULT=/etc/default/indexdata-solr-zookeeper
-if [ -f "$DEFAULT" ] ; then 
-    . $DEFAULT
-fi 
-
-# test -d $SERVICES || exit 0
-
-set -e
-
-case "$1" in
-    start)
-       for SERVICE in $SERVICES ; do
-           if [ -d "$SERVICE" ] ; then
-               echo "starting $SERVICE"
-               cd $SERVICE
-               $DAEMON $1
-           else
-               echo "No directory at $SERVICE"
-           fi          
-       done
-       ;;
-    stop)
-       for SERVICE in $SERVICES ; do
-           if [ -d "$SERVICE" ] ; then
-               echo  "Stopping $SERVICE"
-               cd $SERVICE
-               $DAEMON stop
-           else
-               echo "No directory at $SERVICE"
-           fi
-       done
-       ;;
-  status)
-       for SERVICE in $SERVICES ; do
-           if [ -d "$SERVICE" ] ; then
-               echo  "checking $SERVICE"
-               cd $SERVICE
-               $DAEMON status
-           else
-               echo "No directory at $SERVICE"
-           fi
-       done
-       ;;
-  #reload)
-       #
-       #       If the daemon can reload its config files on the fly
-       #       for example by sending it SIGHUP, do it here.
-       #
-       #       If the daemon responds to changes in its config file
-       #       directly anyway, make this a do-nothing entry.
-       #
-       # echo "Reloading $DESC configuration files."
-       # start-stop-daemon --stop --signal 1 --quiet --pidfile \
-       #       /var/run/$NAME.pid --exec $DAEMON
-  #;;
-  restart|force-reload)
-       #
-       #       If the "reload" option is implemented, move the "force-reload"
-       #       option to the "reload" entry above. If not, "force-reload" is
-       #       just the same as "restart".
-       #
-       echo "Restarting $DESC: "
-       for srv in $SERVICES ; do
-               $srv restart
-       done
-       ;;
-  *)
-       N=/etc/init.d/$NAME
-       # echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
-       echo "Usage: $N {start|stop|restart|force-reload}" >&2
-       exit 1
-       ;;
-esac
-
-exit 0

diff --git a/etc/pz2-solr.xsl b/etc/pz2-solr.xsl
deleted file mode 100644 (file)
index 0b7b796..0000000
--- a/etc/pz2-solr.xsl
+++ /dev/null
@@ -1,25 +0,0 @@
-<?xml version="1.0"?>
-<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" 
-               xmlns:pz="http://www.indexdata.com/pazpar2/1.0" >
-  <xsl:template  match="/">
-    <add>
-      <xsl:apply-templates></xsl:apply-templates>
-    </add>
-  </xsl:template>
-
-  <xsl:template match="pz:record">
-    <doc>
-      <xsl:apply-templates></xsl:apply-templates>
-    </doc>
-  </xsl:template>
-  <xsl:template match="pz:metadata">
-    <xsl:if test="@type">
-      <field>
-       <xsl:attribute  name="name">
-         <xsl:value-of select="@type"/>
-       </xsl:attribute>
-       <xsl:value-of select="."/>
-      </field>
-    </xsl:if>
-  </xsl:template>
-</xsl:stylesheet>

diff --git a/etc/solr4-devl.xml b/etc/solr4-devl.xml
deleted file mode 100644 (file)
index ae14da7..0000000
--- a/etc/solr4-devl.xml
+++ /dev/null
@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Context 
-   docBase="../solr-4.6.0.war" 
->
-  <Environment name="solr/home" type="java.lang.String" value="lui-solr4" override="true"/>
-</Context>

diff --git a/etc/solr4-tomcat-context-master.xml b/etc/solr4-tomcat-context-master.xml
deleted file mode 100644 (file)
index 7cda8a2..0000000
--- a/etc/solr4-tomcat-context-master.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Version 0.6.2. Adding comment to force config update  -->
-<Context 
-    docBase="/usr/share/masterkey/lui/solr4/war/solr.war" 
-    path="/solr4"
->
-  <Environment name="solr/home" type="java.lang.String" value="/usr/share/masterkey/lui/solr4/master" override="true"/>
-</Context>

diff --git a/etc/solr4-tomcat-context-slave.xml b/etc/solr4-tomcat-context-slave.xml
deleted file mode 100644 (file)
index edc316b..0000000
--- a/etc/solr4-tomcat-context-slave.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Version 0.6.2. Adding comment to force check -->
-<Context 
-    docBase="/usr/share/masterkey/lui/solr4/war/solr.war" 
-    path="/solr4-slave"
->
-  <Environment name="solr/home" type="java.lang.String" value="/usr/share/masterkey/lui/solr4/slave" override="true"/>
-</Context>

diff --git a/install_solr_service.sh b/install_solr_service.sh
deleted file mode 100755 (executable)
index c91777a..0000000
--- a/install_solr_service.sh
+++ /dev/null
@@ -1,330 +0,0 @@
-#!/usr/bin/env bash
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-if [[ $EUID -ne 0 ]]; then
-  echo -e "\nERROR: This script must be run as root\n" 1>&2
-  exit 1
-fi
-
-print_usage() {
-  ERROR_MSG="$1"
-
-  if [ "$ERROR_MSG" != "" ]; then
-    echo -e "\nERROR: $ERROR_MSG\n" 1>&2
-  fi
-
-  echo ""
-  echo "Usage: install_solr_service.sh path_to_solr_distribution_archive OPTIONS"
-  echo ""
-  echo "  The first argument to the script must be a path to a Solr distribution archive, such as solr-5.0.0.tgz"
-  echo "    (only .tgz or .zip are supported formats for the archive)"
-  echo ""
-  echo "  Supported OPTIONS include:"
-  echo ""
-  echo "    -d     Directory for live / writable Solr files, such as logs, pid files, and index data; defaults to /var/solr"
-  echo ""
-  echo "    -i     Directory to extract the Solr installation archive; defaults to /opt/"
-  echo "             The specified path must exist prior to using this script."
-  echo ""
-  echo "    -p     Port Solr should bind to; default is 8983"
-  echo ""
-  echo "    -s     Service name; defaults to solr"
-  echo ""
-  echo "    -u     User to own the Solr files and run the Solr process as; defaults to solr"
-  echo "             This script will create the specified user account if it does not exist."
-  echo ""
-  echo "    -f     Upgrade Solr. Overwrite symlink and init script of previous installation."
-  echo ""
-  echo " NOTE: Must be run as the root user"
-  echo ""
-} # end print_usage
-
-if [ -f "/proc/version" ]; then
-  proc_version=`cat /proc/version`
-else
-  proc_version=`uname -a`
-fi
-
-if [[ $proc_version == *"Debian"* ]]; then
-  distro=Debian
-elif [[ $proc_version == *"Red Hat"* ]]; then
-  distro=RedHat
-elif [[ $proc_version == *"Ubuntu"* ]]; then
-  distro=Ubuntu
-elif [[ $proc_version == *"SUSE"* ]]; then
-  distro=SUSE
-else
-  echo -e "\nERROR: Your Linux distribution ($proc_version) not supported by this script!\nYou'll need to setup Solr as a service manually using the documentation provided in the Solr Reference Guide.\n" 1>&2
-  exit 1
-fi
-
-if [ -z "$1" ]; then
-  print_usage "Must specify the path to the Solr installation archive, such as solr-5.0.0.tgz"
-  exit 1
-fi
-
-SOLR_ARCHIVE=$1
-if [ ! -f "$SOLR_ARCHIVE" ]; then
-  print_usage "Specified Solr installation archive $SOLR_ARCHIVE not found!"
-  exit 1
-fi
-
-# strip off path info
-SOLR_INSTALL_FILE=${SOLR_ARCHIVE##*/}
-is_tar=true
-if [ ${SOLR_INSTALL_FILE: -4} == ".tgz" ]; then
-  SOLR_DIR=${SOLR_INSTALL_FILE%.tgz}
-elif [ ${SOLR_INSTALL_FILE: -4} == ".zip" ]; then
-  SOLR_DIR=${SOLR_INSTALL_FILE%.zip}
-  is_tar=false
-else
-  print_usage "Solr installation archive $SOLR_ARCHIVE is invalid, expected a .tgz or .zip file!"
-  exit 1
-fi
-
-if [ $# -gt 1 ]; then
-  shift
-  while true; do
-    case $1 in
-        -i)
-            if [[ -z "$2" || "${2:0:1}" == "-" ]]; then
-              print_usage "Directory path is required when using the $1 option!"
-              exit 1
-            fi
-            SOLR_EXTRACT_DIR=$2
-            shift 2
-        ;;
-        -d)
-            if [[ -z "$2" || "${2:0:1}" == "-" ]]; then
-              print_usage "Directory path is required when using the $1 option!"
-              exit 1
-            fi
-            SOLR_VAR_DIR="$2"
-            shift 2
-        ;;
-        -u)
-            if [[ -z "$2" || "${2:0:1}" == "-" ]]; then
-              print_usage "Username is required when using the $1 option!"
-              exit 1
-            fi
-            SOLR_USER="$2"
-            shift 2
-        ;;
-        -s)
-            if [[ -z "$2" || "${2:0:1}" == "-" ]]; then
-              print_usage "Service name is required when using the $1 option!"
-              exit 1
-            fi
-            SOLR_SERVICE="$2"
-            shift 2
-        ;;
-        -p)
-            if [[ -z "$2" || "${2:0:1}" == "-" ]]; then
-              print_usage "Port is required when using the $1 option!"
-              exit 1
-            fi
-            SOLR_PORT="$2"
-            shift 2
-        ;;
-        -f)
-            SOLR_UPGRADE="YES"
-            shift 1
-        ;;
-        -help|-usage)
-            print_usage ""
-            exit 0
-        ;;
-        --)
-            shift
-            break
-        ;;
-        *)
-            if [ "$1" != "" ]; then
-              print_usage "Unrecognized or misplaced argument: $1!"
-              exit 1
-            else
-              break # out-of-args, stop looping
-            fi
-        ;;
-    esac
-  done
-fi
-
-if [ -z "$SOLR_EXTRACT_DIR" ]; then
-  SOLR_EXTRACT_DIR=/opt
-fi
-
-if [ ! -d "$SOLR_EXTRACT_DIR" ]; then
-  print_usage "Installation directory $SOLR_EXTRACT_DIR not found! Please create it before running this script."
-  exit 1
-fi
-
-if [ -z "$SOLR_SERVICE" ]; then
-  SOLR_SERVICE=solr
-fi
-
-if [ -z "$SOLR_VAR_DIR" ]; then
-  SOLR_VAR_DIR="/var/$SOLR_SERVICE"
-fi
-
-if [ -z "$SOLR_USER" ]; then
-  SOLR_USER=solr
-fi
-
-if [ -z "$SOLR_PORT" ]; then
-  SOLR_PORT=8983
-fi
-
-if [ -z "$SOLR_UPGRADE" ]; then
-  SOLR_UPGRADE=NO
-fi
-
-if [ ! "$SOLR_UPGRADE" = "YES" ]; then
-  if [ -f "/etc/init.d/$SOLR_SERVICE" ]; then
-    print_usage "/etc/init.d/$SOLR_SERVICE already exists! Perhaps Solr is already setup as a service on this host? To upgrade Solr use the -f option."
-    exit 1
-  fi
-
-  if [ -e "$SOLR_EXTRACT_DIR/$SOLR_SERVICE" ]; then
-    print_usage "$SOLR_EXTRACT_DIR/$SOLR_SERVICE already exists! Please move this directory / link or choose a different service name using the -s option."
-    exit 1
-  fi
-fi
-
-# stop running instance
-if [ -f "/etc/init.d/$SOLR_SERVICE" ]; then
-  echo -e "\nStopping Solr instance if exists ...\n"
-  service "$SOLR_SERVICE" stop
-fi
-
-# create user if not exists
-solr_uid="`id -u "$SOLR_USER"`"
-if [ $? -ne 0 ]; then
-  echo "Creating new user: $SOLR_USER"
-  if [ "$distro" == "RedHat" ]; then
-    adduser "$SOLR_USER"
-  elif [ "$distro" == "SUSE" ]; then
-    useradd -m "$SOLR_USER"
-  else
-    adduser --system --shell /bin/bash --group --disabled-password --home "$SOLR_VAR_DIR" "$SOLR_USER"
-  fi
-fi
-
-# extract
-SOLR_INSTALL_DIR="$SOLR_EXTRACT_DIR/$SOLR_DIR"
-if [ ! -d "$SOLR_INSTALL_DIR" ]; then
-
-  echo -e "\nExtracting $SOLR_ARCHIVE to $SOLR_EXTRACT_DIR\n"
-
-  if $is_tar ; then
-    tar zxf "$SOLR_ARCHIVE" -C "$SOLR_EXTRACT_DIR"
-  else
-    unzip -q "$SOLR_ARCHIVE" -d "$SOLR_EXTRACT_DIR"
-  fi
-
-  if [ ! -d "$SOLR_INSTALL_DIR" ]; then
-    echo -e "\nERROR: Expected directory $SOLR_INSTALL_DIR not found after extracting $SOLR_ARCHIVE ... script fails.\n" 1>&2
-    exit 1
-  fi
-
-  chown -R root: "$SOLR_INSTALL_DIR"
-  find "$SOLR_INSTALL_DIR" -type d -print0 | xargs -0 chmod 0755
-  find "$SOLR_INSTALL_DIR" -type f -print0 | xargs -0 chmod 0644
-  chmod -R 0755 "$SOLR_INSTALL_DIR/bin"
-else
-  echo -e "\nWARNING: $SOLR_INSTALL_DIR already exists! Skipping extract ...\n"
-fi
-
-# create a symlink for easier scripting
-if [ -h "$SOLR_EXTRACT_DIR/$SOLR_SERVICE" ]; then
-  echo -e "\nRemoving old symlink $SOLR_EXTRACT_DIR/$SOLR_SERVICE ...\n"
-  rm "$SOLR_EXTRACT_DIR/$SOLR_SERVICE"
-fi
-if [ -e "$SOLR_EXTRACT_DIR/$SOLR_SERVICE" ]; then
-  echo -e "\nWARNING: $SOLR_EXTRACT_DIR/$SOLR_SERVICE is not symlink! Skipping symlink update ...\n"
-else
-  echo -e "\nInstalling symlink $SOLR_EXTRACT_DIR/$SOLR_SERVICE -> $SOLR_INSTALL_DIR ...\n"
-  ln -s "$SOLR_INSTALL_DIR" "$SOLR_EXTRACT_DIR/$SOLR_SERVICE"
-fi
-
-# install init.d script
-echo -e "\nInstalling /etc/init.d/$SOLR_SERVICE script ...\n"
-cp "$SOLR_INSTALL_DIR/bin/init.d/solr" "/etc/init.d/$SOLR_SERVICE"
-chmod 0744 "/etc/init.d/$SOLR_SERVICE"
-chown root: "/etc/init.d/$SOLR_SERVICE"
-# do some basic variable substitution on the init.d script
-sed_expr1="s#SOLR_INSTALL_DIR=.*#SOLR_INSTALL_DIR=\"$SOLR_EXTRACT_DIR/$SOLR_SERVICE\"#"
-sed_expr2="s#SOLR_ENV=.*#SOLR_ENV=\"/etc/default/$SOLR_SERVICE.in.sh\"#"
-sed_expr3="s#RUNAS=.*#RUNAS=\"$SOLR_USER\"#"
-sed_expr4="s#Provides:.*#Provides: $SOLR_SERVICE#"
-sed -i -e "$sed_expr1" -e "$sed_expr2" -e "$sed_expr3" -e "$sed_expr4" "/etc/init.d/$SOLR_SERVICE"
-
-# install/move configuration
-if [ ! -d /etc/default ]; then
-  mkdir /etc/default
-  chown root: /etc/default
-  chmod 0755 /etc/default
-fi
-if [ -f "$SOLR_VAR_DIR/solr.in.sh" ]; then
-  echo -e "\nMoving existing $SOLR_VAR_DIR/solr.in.sh to /etc/default/$SOLR_SERVICE.in.sh ...\n"
-  mv "$SOLR_VAR_DIR/solr.in.sh" "/etc/default/$SOLR_SERVICE.in.sh"
-elif [ -f "/etc/default/$SOLR_SERVICE.in.sh" ]; then
-  echo -e "\n/etc/default/$SOLR_SERVICE.in.sh already exist. Skipping install ...\n"
-else
-  echo -e "\nInstalling /etc/default/$SOLR_SERVICE.in.sh ...\n"
-  cp "$SOLR_INSTALL_DIR/bin/solr.in.sh" "/etc/default/$SOLR_SERVICE.in.sh"
-  echo "SOLR_PID_DIR=\"$SOLR_VAR_DIR\"
-SOLR_HOME=\"$SOLR_VAR_DIR/data\"
-LOG4J_PROPS=\"$SOLR_VAR_DIR/log4j.properties\"
-SOLR_LOGS_DIR=\"$SOLR_VAR_DIR/logs\"
-SOLR_PORT=\"$SOLR_PORT\"
-" >> "/etc/default/$SOLR_SERVICE.in.sh"
-fi
-chown root: "/etc/default/$SOLR_SERVICE.in.sh"
-chmod 0644 "/etc/default/$SOLR_SERVICE.in.sh"
-
-# install data directories and files
-mkdir -p "$SOLR_VAR_DIR/data"
-mkdir -p "$SOLR_VAR_DIR/logs"
-if [ -f "$SOLR_VAR_DIR/data/solr.xml" ]; then
-  echo -e "\n$SOLR_VAR_DIR/data/solr.xml already exists. Skipping install ...\n"
-else
-  cp "$SOLR_INSTALL_DIR/server/solr/solr.xml" "$SOLR_VAR_DIR/data/solr.xml"
-fi
-if [ -f "$SOLR_VAR_DIR/log4j.properties" ]; then
-  echo -e "\n$SOLR_VAR_DIR/log4j.properties already exists. Skipping install ...\n"
-else
-  cp "$SOLR_INSTALL_DIR/server/resources/log4j.properties" "$SOLR_VAR_DIR/log4j.properties"
-  sed_expr="s#solr.log=.*#solr.log=\${solr.solr.home}/../logs#"
-  sed -i -e "$sed_expr" "$SOLR_VAR_DIR/log4j.properties"
-fi
-chown -R "$SOLR_USER:" "$SOLR_VAR_DIR"
-find "$SOLR_VAR_DIR" -type d -print0 | xargs -0 chmod 0750
-find "$SOLR_VAR_DIR" -type f -print0 | xargs -0 chmod 0640
-
-# configure autostart of service
-if [[ "$distro" == "RedHat" || "$distro" == "SUSE" ]]; then
-  chkconfig "$SOLR_SERVICE" on
-else
-  update-rc.d "$SOLR_SERVICE" defaults
-fi
-
-# start service
-service "$SOLR_SERVICE" start
-sleep 5
-service "$SOLR_SERVICE" status
-
-echo "Service $SOLR_SERVICE installed."

diff --git a/lib/jcl-over-slf4j-1.6.6.jar b/lib/jcl-over-slf4j-1.6.6.jar
deleted file mode 100644 (file)
index ab898c0..0000000
Binary files a/lib/jcl-over-slf4j-1.6.6.jar and /dev/null differ

diff --git a/lib/jul-to-slf4j-1.6.6.jar b/lib/jul-to-slf4j-1.6.6.jar
deleted file mode 100644 (file)
index fa8640f..0000000
Binary files a/lib/jul-to-slf4j-1.6.6.jar and /dev/null differ

diff --git a/lib/log4j-1.2.16.jar b/lib/log4j-1.2.16.jar
deleted file mode 100644 (file)
index 5429a90..0000000
Binary files a/lib/log4j-1.2.16.jar and /dev/null differ

diff --git a/lib/log4j.properties b/lib/log4j.properties
deleted file mode 100644 (file)
index 93dc62a..0000000
--- a/lib/log4j.properties
+++ /dev/null
@@ -1,19 +0,0 @@
-#  Logging level
-log4j.rootLogger=INFO, file, CONSOLE
-
-log4j.appender.CONSOLE=org.apache.log4j.ConsoleAppender
-
-log4j.appender.CONSOLE.layout=org.apache.log4j.PatternLayout
-log4j.appender.CONSOLE.layout.ConversionPattern=%-4r [%t] %-5p %c %x \u2013 %m%n
-
-#- size rotation with log cleanup.
-log4j.appender.file=org.apache.log4j.RollingFileAppender
-log4j.appender.file.MaxFileSize=4MB
-log4j.appender.file.MaxBackupIndex=9
-
-#- File to log to and log format
-log4j.appender.file.File=logs/solr.log
-log4j.appender.file.layout=org.apache.log4j.PatternLayout
-log4j.appender.file.layout.ConversionPattern=%-5p - %d{yyyy-MM-dd HH:mm:ss.SSS}; %C; %m\n
-
-log4j.logger.org.apache.zookeeper=WARN
\ No newline at end of file

diff --git a/lib/slf4j-api-1.6.6.jar b/lib/slf4j-api-1.6.6.jar
deleted file mode 100644 (file)
index 4c03fa6..0000000
Binary files a/lib/slf4j-api-1.6.6.jar and /dev/null differ

diff --git a/lib/slf4j-log4j12-1.6.6.jar b/lib/slf4j-log4j12-1.6.6.jar
deleted file mode 100644 (file)
index e72c2d6..0000000
Binary files a/lib/slf4j-log4j12-1.6.6.jar and /dev/null differ

diff --git a/lui-solr.spec b/lui-solr.spec
deleted file mode 100644 (file)
index b78551c..0000000
--- a/lui-solr.spec
+++ /dev/null
@@ -1,80 +0,0 @@
-Summary: Local Unified Index (Solr) 
-Name: masterkey-lui-solr
-Version: 0.3.0
-Release: 1.indexdata
-License: IndexData
-Group: Applications/Internet
-Vendor: Index Data ApS <info@indexdata.dk>
-Source: masterkey-lui-solr-%{version}.tar.gz
-BuildArch: noarch
-BuildRoot: %{_tmppath}/%{name}-%{version}-root
-Packager: Dennis Schafroth <dennis@indexdata.com>
-URL: http://www.indexdata.dk/masterkey
-
-%description
-The Local Unified Index is a index that contains multiple logical indexes. The underlying index is a Solr/lucene index configured to use a specific LUI schema. 
-
-%package -n masterkey-lui-solr-tomcat
-Summary: Local Unified Index Solr Tomcat
-Requires: masterkey-lui-solr
-Group: Applications/Internet
-
-%package -n masterkey-lui-solr-tomcat6
-Summary: Local Unified Index Solr Tomcat 6 integration
-Requires: tomcat6 masterkey-lui-solr-tomcat
-Group: Applications/Internet
-
-#%description -n masterkey-lui-solr-initd
-#The LUI is the stand-alone Solr/Lucene Index with the LUI schema
-
-%description -n masterkey-lui-solr-tomcat 
-The LUI Tomcat is part of the MasterKey suite. This package provides the LUI Tomcat context
-
-%description -n masterkey-lui-solr-tomcat6
-The LUI is part of the MasterKey suite. This package provides Tomcat 6 integration.
-
-%prep
-%setup
-%build
-
-%install
-mkdir -p            ${RPM_BUILD_ROOT}/%{_datadir}/masterkey/lui/solr/war
-cp -a dist/*        ${RPM_BUILD_ROOT}/%{_datadir}/masterkey/lui/solr/war
-mkdir -p            ${RPM_BUILD_ROOT}/%{_datadir}/masterkey/lui/solr/conf
-cp -a solr-conf/*   ${RPM_BUILD_ROOT}/%{_datadir}/masterkey/lui/solr/conf
-
-mkdir -p                         ${RPM_BUILD_ROOT}/%{_sysconfdir}/masterkey/lui/solr
-# cp -a etc/harvester.properties ${RPM_BUILD_ROOT}/%{_sysconfdir}/masterkey/lui/solr
-
-#mkdir -p ${RPM_BUILD_ROOT}/%{_localstatedir}/log/masterkey/lui/solr
-mkdir -p ${RPM_BUILD_ROOT}/%{_localstatedir}/lib/masterkey/lui/solr/data
-
-#tomcat context
-sed -e 's@docBase=".*"@docBase="%{_datadir}\/masterkey\/lui\/solr\/war\/apache-solr-3.3.0.war"@g' etc/solr-tomcat-context.xml > ${RPM_BUILD_ROOT}/%{_sysconfdir}/masterkey/lui/solr/lui-solr-context.xml
-
-# Solr config
-sed -e 's@${solr.data.dir:.*}@${solr.data.dir:%{_localstatedir}\/lib\/masterkey\/lui\/solr\/data}@g' solr-conf/solrconfig.xml > ${RPM_BUILD_ROOT}/%{_datadir}/masterkey/lui/solr/conf/solrconfig.xml
-
-%clean
-rm -fr ${RPM_BUILD_ROOT}
-
-%post -n masterkey-lui-solr-tomcat6
-ln -sf %{_sysconfdir}/masterkey/lui/solr/lui-solr-context.xml %{_sysconfdir}/tomcat6/Catalina/localhost/lui-solr.xml
-
-%postun -n masterkey-lui-solr-tomcat6
-if [ $1 = 0 ]; then
-  rm -rf %{_sysconfdir}/tomcat6/Catalina/localhost/lui-solr.xml
-fi
-
-%files
-%defattr(755,tomcat,tomcat)
-%{_datadir}/masterkey/lui/solr
-%{_localstatedir}/lib/masterkey/lui/solr
-%{_localstatedir}/lib/masterkey/lui/solr/data
-%attr(755,tomcat,tomcat) %dir %{_localstatedir}/lib/masterkey/lui/solr
-
-%files -n masterkey-lui-solr-tomcat
-%defattr(-,root,root)
-%config %{_sysconfdir}/masterkey/lui/solr/lui-solr-context.xml
-
-%files -n masterkey-lui-solr-tomcat6

diff --git a/scripts/commit_solr.sh b/scripts/commit_solr.sh
deleted file mode 100644 (file)
index df587ab..0000000
--- a/scripts/commit_solr.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-HOST_PORT=localhost:8080
-
-if [ "$2" != "" ] ; then 
-    HOST_PORT="$2"
-fi
-
-SOLR_PATH=solr4
-if [ "$2" != "" ] ; then 
-    SOLR_PATH="$2"
-fi
-
-if [ "$1" == "-h" ] ; then 
-    echo "$0 [[HOST:PORT] SOLR_PATH] (default $HOST_PORT/$SOLR_PATH)"
-fi
-
-curl http://$HOST:$PORT/$SOLR_PATH/update -H "Content-Type: text/xml" --data-binary '<commit waitFlush="false" waitSearcher="false" expungeDeletes="true"/>'
\ No newline at end of file

diff --git a/scripts/delete_solr.sh b/scripts/delete_solr.sh
deleted file mode 100755 (executable)
index 6c51408..0000000
--- a/scripts/delete_solr.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-
-HOST_PORT="localhost:8080"
-
-if [ "$2" != "" ] ; then 
-    HOST_PORT="$2"
-fi 
-
-SOLR_PATH=solr4
-if [ "$3" != "" ] ; then 
-    SOLR_PATH="$3"
-fi
-
-if [ "$1" == "" ] ; then 
-    echo "$0 databaseid [[HOST:PORT] PATH] (default $HOST_PORT/$PATH)"
-    exit 1 ; 
-fi  
-
-curl http://${HOST_PORT}/$SOLR_PATH/update -H "Content-Type: text/xml" --data-binary "<delete><query>database:$1</query></delete>"
-curl http://${HOST_PORT}/$SOLR_PATH/update -H "Content-Type: text/xml" --data-binary '<commit waitFlush="false" waitSearcher="false"/>'

diff --git a/scripts/make_new_config.sh b/scripts/make_new_config.sh
deleted file mode 100755 (executable)
index 034e15c..0000000
--- a/scripts/make_new_config.sh
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/bash 
-
-INSTALL_PATH=`pwd`
-CONFIG=$1
-mkdir -p ${CONFIG}
-ln -s ${INSTALL_PATH}/etc ${CONFIG}/
-ln -s ${INSTALL_PATH}/contexts ${CONFIG}/
-ln -s ${INSTALL_PATH}/lib ${CONFIG}/
-ln -s ${INSTALL_PATH}/webapps ${CONFIG}/
-ln -s ${INSTALL_PATH}/resources ${CONFIG}/
-ln -s ${INSTALL_PATH}/start.jar ${CONFIG}/
-ln -s ${INSTALL_PATH}/zookeeper.sh ${CONFIG}/
-cp -rp ${INSTALL_PATH}/solr ${CONFIG}/
-mkdir -p ${CONFIG}/logs
\ No newline at end of file

diff --git a/scripts/optimize_solr.sh b/scripts/optimize_solr.sh
deleted file mode 100755 (executable)
index 83e4219..0000000
--- a/scripts/optimize_solr.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-
-HOST_PORT=localhost:8080
-
-if [ "$2" != "" ] ; then 
-    HOST_PORT="$2"
-fi
-
-SOLR_PATH=solr4
-if [ "$3" != "" ] ; then 
-    SOLR_PATH="$3"
-fi
-
-if [ "$1" != "YES" ] ; then 
-    echo "$0 YES [[HOST:PORT] SOLR_PATH] (default $HOST_PORT/$SOLR_PATH)"
-    exit 1 ; 
-fi  
-
-
-curl http://${HOST_PORT}/$SOLR_PATH/update -H "Content-Type: text/xml" --data-binary '<optimize waitSearcher="false" expungeDeletes="true" />'

diff --git a/scripts/zookeeper.sh b/scripts/zookeeper.sh
deleted file mode 100755 (executable)
index 50491e4..0000000
--- a/scripts/zookeeper.sh
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/bash
-
-NAME="indexdata-lui-solr-zookeeper"
-HOST=localhost
-PORT=8983
-SHARDS=2
-PID_FILE=/var/run/${NAME}.pid
-LOG_FILE=/var/log/${NAME}.log
-ZOOKEEPER=yes
-OPTIONS=${OPTIONS:-options}
-
-if [ -f "$OPTIONS" ]; then 
-    source $OPTIONS
-else
-    echo "No options file ($OPTIONS). Using defaults."
-fi
-let ZKPORT=$PORT+1000
-if [ "$ZKHOSTS" == "" ] ; then
-    ZKHOSTS=${HOST}:${ZKPORT}
-fi
-
-if [ "$BOOTSTRAP_CONF" != "" ] ; then
-    BOOTSTRAP_OPT="-Dbootstrap_confdir=$BOOTSTRAP_CONF"
-fi
-if [ "$PORT" == "" ] ; then
-    echo Port missing
-    
-fi
-if [ "$ZKHOSTS" == "" ] ; then
-    echo ZKHOSTS missing
-fi
-if [ "$SHARDS" == "" ] ; then 
-    echo SHARDS missing
-fi
-if [ "$ZOOKEEPER" == "yes" ] ; then 
-    ZKRUN="-DzkRun -DnumShards=${SHARDS}"
-fi
-if [ "${SOLR_HOME}" != "" ] ; then
-    SOLR_HOME_OPT="-Dsolr.solr.home=${SOLR_HOME}"
-fi
-
-OPTIONS=" $SOLR_HOME_OPT -Djetty.port=$PORT ${BOOTSTRAP_OPT} -Dcollection.configName=$NAME ${ZKRUN} -DzkHost=${ZKHOSTS} "
-if [ "$1" == "start" ]; then 
-    if [ -f "${PID_FILE}" ] ; then 
-       echo "pid file ${PID_FILE} exists. Already running?"
-    else
-       java $OPTIONS  -jar start.jar > $LOG_FILE & 
-       echo $! > ${PID_FILE}
-    fi
-elif [ "$1" == "stop" ]; then 
-    if [ -f "${PID_FILE}" ] ; then 
-       PID="`/bin/cat ${PID_FILE}`"
-       if [ "$PID" != "" ] ; then
-           kill $PID
-           /bin/rm ${PID_FILE}
-       else
-           echo "Unable to extract PID from ${PID_FILE}" 
-       fi
-    else
-       echo "No pid file ($PID_FILE) found"
-    fi
-else
-       echo "$0 [start|stop|status]" 
-fi

diff --git a/solr-5.5.1.tgz b/solr-5.5.1.tgz
deleted file mode 100644 (file)
index 2b4ccf0..0000000
Binary files a/solr-5.5.1.tgz and /dev/null differ

diff --git a/zookeeper/.gitignore b/zookeeper/.gitignore
deleted file mode 100644 (file)
index bdda313..0000000
--- a/zookeeper/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-*.log
-*.pid
-logs/
-solr/zoo_data
-solr-webapp/
\ No newline at end of file

diff --git a/zookeeper/README.txt b/zookeeper/README.txt
deleted file mode 100644 (file)
index b95697f..0000000
--- a/zookeeper/README.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-Solr example
-------------
-
-This directory contains an instance of the Jetty Servlet container setup to 
-run Solr using an example configuration.
-
-To run this example:
-
-  java -jar start.jar
-
-in this example directory, and when Solr is started connect to 
-
-  http://localhost:8983/solr/
-
-To add documents to the index, use the post.jar (or post.sh script) in
-the example/exampledocs subdirectory (while Solr is running), for example:
-
-     cd exampledocs
-     java -jar post.jar *.xml
-Or:  sh post.sh *.xml
-
-For more information about this example please read...
-
- * example/solr/README.txt
-   For more information about the "Solr Home" and Solr specific configuration
- * http://lucene.apache.org/solr/tutorial.html
-   For a Tutorial using this example configuration
- * http://wiki.apache.org/solr/SolrResources 
-   For a list of other tutorials and introductory articles.
-
-Notes About These Examples
---------------------------
-
-* SolrHome *
-
-By default, start.jar starts Solr in Jetty using the default Solr Home
-directory of "./solr/" (relative to the working directory of hte servlet 
-container).  To run other example configurations, you can specify the 
-solr.solr.home system property when starting jetty...
-
-  java -Dsolr.solr.home=multicore -jar start.jar
-  java -Dsolr.solr.home=example-DIH/solr -jar start.jar
-
-* References to Jar Files Outside This Directory *
-
-Various example SolrHome dirs contained in this directory may use "<lib>"
-statements in the solrconfig.xml file to reference plugin jars outside of 
-this directory for loading "contrib" plugins via relative paths.  
-
-If you make a copy of this example server and wish to use the 
-ExtractingRequestHandler (SolrCell), DataImportHandler (DIH), UIMA, the 
-clustering component, or any other modules in "contrib", you will need to 
-copy the required jars or update the paths to those jars in your 
-solrconfig.xml.
-
-* Logging *
-
-By default, Jetty & Solr will log to the console a logs/solr.log. This can be convenient when 
-first getting started, but eventually you will want to log just to a file. To 
-configure logging, edit the log4j.properties file in "resources".
- 
-It is also possible to setup log4j or other popular logging frameworks.
-

diff --git a/zookeeper/cloud-scripts/log4j.properties b/zookeeper/cloud-scripts/log4j.properties
deleted file mode 100644 (file)
index c581583..0000000
--- a/zookeeper/cloud-scripts/log4j.properties
+++ /dev/null
@@ -1,8 +0,0 @@
-#  Logging level
-log4j.rootLogger=INFO, stderr
-
-# log to stderr
-log4j.appender.stderr = org.apache.log4j.ConsoleAppender
-log4j.appender.stderr.Target = System.err
-log4j.appender.stderr.layout = org.apache.log4j.PatternLayout
-log4j.appender.stderr.layout.ConversionPattern=%-5p - %d{yyyy-MM-dd HH:mm:ss.SSS}; %C; %m\n

diff --git a/zookeeper/cloud-scripts/zkcli.bat b/zookeeper/cloud-scripts/zkcli.bat
deleted file mode 100644 (file)
index 8232a72..0000000
--- a/zookeeper/cloud-scripts/zkcli.bat
+++ /dev/null
@@ -1,11 +0,0 @@
-REM You can override pass the following parameters to this script:\r
-REM \r
-\r
-set JVM=java\r
-\r
-REM  Find location of this script\r
-\r
-set SDIR=%~dp0\r
-if "%SDIR:~-1%"=="\" set SDIR=%SDIR:~0,-1%\r
-\r
-"%JVM%" -Dlog4j.configuration=file:%SDIR%\log4j.properties -classpath "%SDIR%\..\solr-webapp\webapp\WEB-INF\lib\*;%SDIR%\..\lib\ext\*" org.apache.solr.cloud.ZkCLI %*\r

diff --git a/zookeeper/cloud-scripts/zkcli.sh b/zookeeper/cloud-scripts/zkcli.sh
deleted file mode 100755 (executable)
index ab5da96..0000000
--- a/zookeeper/cloud-scripts/zkcli.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/usr/bin/env bash
-
-# You can override pass the following parameters to this script:
-# 
-
-JVM="java"
-
-# Find location of this script
-
-sdir="`dirname \"$0\"`"
-
-PATH=$JAVA_HOME/bin:$PATH $JVM -Dlog4j.configuration=file:$sdir/log4j.properties -classpath "$sdir/../solr-webapp/webapp/WEB-INF/lib/*:$sdir/../lib/ext/*" org.apache.solr.cloud.ZkCLI ${1+"$@"}
-

diff --git a/zookeeper/contexts/solr-jetty-context.xml b/zookeeper/contexts/solr-jetty-context.xml
deleted file mode 100644 (file)
index 50978a3..0000000
--- a/zookeeper/contexts/solr-jetty-context.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE Configure PUBLIC "-//Jetty//Configure//EN" "http://www.eclipse.org/jetty/configure.dtd">
-<Configure class="org.eclipse.jetty.webapp.WebAppContext">
-  <Set name="contextPath"><SystemProperty name="hostContext" default="/solr"/></Set>
-  <Set name="war"><SystemProperty name="jetty.home"/>/webapps/solr.war</Set>
-  <Set name="defaultsDescriptor"><SystemProperty name="jetty.home"/>/etc/webdefault.xml</Set>
-  <Set name="tempDirectory"><Property name="jetty.home" default="."/>/solr-webapp</Set>
-</Configure>

diff --git a/zookeeper/etc/create-solrtest.keystore.sh b/zookeeper/etc/create-solrtest.keystore.sh
deleted file mode 100755 (executable)
index d3decee..0000000
--- a/zookeeper/etc/create-solrtest.keystore.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/bash -ex
-
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-############
- 
-# This script shows how the solrtest.keystore file used for solr tests 
-# and these example configs was generated.
-#
-# Running this script should only be necessary if the keystore file
-# needs to be replaced, which shouldn't be required until sometime around
-# the year 4751.
-#
-# NOTE: the "-ext" option used in the "keytool" command requires that you have
-# the java7 version of keytool, but the generated key will work with any 
-# version of java
-
-echo "### remove old keystore"
-rm -f solrtest.keystore
-
-echo "### create keystore and keys"
-keytool -keystore solrtest.keystore -storepass "secret" -alias solrtest -keypass "secret" -genkey -keyalg RSA -dname "cn=localhost, ou=SolrTest, o=lucene.apache.org, c=US" -ext "san=ip:127.0.0.1" -validity 999999
-
-

diff --git a/zookeeper/etc/jetty.xml b/zookeeper/etc/jetty.xml
deleted file mode 100644 (file)
index 8e7093d..0000000
--- a/zookeeper/etc/jetty.xml
+++ /dev/null
@@ -1,205 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE Configure PUBLIC "-//Jetty//Configure//EN" "http://www.eclipse.org/jetty/configure.dtd">
-
-<!-- =============================================================== -->
-<!-- Configure the Jetty Server                                      -->
-<!--                                                                 -->
-<!-- Documentation of this file format can be found at:              -->
-<!-- http://wiki.eclipse.org/Jetty/Reference/jetty.xml_syntax        -->
-<!--                                                                 -->
-<!-- =============================================================== -->
-
-
-<Configure id="Server" class="org.eclipse.jetty.server.Server">
-
-    <!-- =========================================================== -->
-    <!-- Server Thread Pool                                          -->
-    <!-- =========================================================== -->
-    <Set name="ThreadPool">
-      <!-- Default queued blocking threadpool -->
-      <New class="org.eclipse.jetty.util.thread.QueuedThreadPool">
-        <Set name="minThreads">10</Set>
-        <Set name="maxThreads">10000</Set>
-        <Set name="detailedDump">false</Set>
-      </New>
-    </Set>
-
-    <!-- =========================================================== -->
-    <!-- Set connectors                                              -->
-    <!-- =========================================================== -->
-
-  <!--
-    <Call name="addConnector">
-      <Arg>
-          <New class="org.eclipse.jetty.server.nio.SelectChannelConnector">
-            <Set name="host"><SystemProperty name="jetty.host" /></Set>
-            <Set name="port"><SystemProperty name="jetty.port" default="8983"/></Set>
-            <Set name="maxIdleTime">50000</Set>
-            <Set name="Acceptors">2</Set>
-            <Set name="statsOn">false</Set>
-            <Set name="confidentialPort">8443</Set>
-           <Set name="lowResourcesConnections">5000</Set>
-           <Set name="lowResourcesMaxIdleTime">5000</Set>
-          </New>
-      </Arg>
-    </Call>
-  -->
-
-    <!-- This connector is currently being used for Solr because it
-          showed better performance than nio.SelectChannelConnector
-          for typical Solr requests.  -->
-    <Call name="addConnector">
-      <Arg>
-          <New class="org.eclipse.jetty.server.bio.SocketConnector">
-            <Call class="java.lang.System" name="setProperty"> <Arg>log4j.configuration</Arg> <Arg>etc/log4j.properties</Arg> </Call>
-            <Set name="host"><SystemProperty name="jetty.host" /></Set>
-            <Set name="port"><SystemProperty name="jetty.port" default="8983"/></Set>
-            <Set name="maxIdleTime">50000</Set>
-            <Set name="lowResourceMaxIdleTime">1500</Set>
-            <Set name="statsOn">false</Set>
-          </New>
-      </Arg>
-    </Call>
-
-    <!-- if the connector below is uncommented, then jetty will also accept SSL
-         connections on port 8984, using a self signed certificate and can 
-         optionally require the client to authenticate with a certificate. 
-         (which can be the same as the server certificate_
-         
-         # Run solr example with SSL on port 8984
-         java -jar start.jar
-         # 
-         # Run post.jar so that it trusts the server cert...
-         java -Djavax.net.ssl.trustStore=../etc/solrtest.keystore -Durl=https://localhost:8984/solr/update -jar post.jar *.xml
-
-         # Run solr example with SSL requiring client certs on port 8984
-         java -Djetty.ssl.clientAuth=true -jar start.jar
-         #
-         # Run post.jar so that it trusts the server cert, 
-         # and authenticates with a client cert
-         java -Djavax.net.ssl.keyStorePassword=secret -Djavax.net.ssl.keyStore=../etc/solrtest.keystore -Djavax.net.ssl.trustStore=../etc/solrtest.keystore -Durl=https://localhost:8984/solr/update -jar post.jar *.xml
-
-    -->
-    <!--
-    <Call name="addConnector">
-      <Arg>
-        <New class="org.eclipse.jetty.server.ssl.SslSelectChannelConnector">
-          <Arg>
-            <New class="org.eclipse.jetty.http.ssl.SslContextFactory">
-              <Set name="keyStore"><SystemProperty name="jetty.home" default="."/>/etc/solrtest.keystore</Set>
-              <Set name="keyStorePassword">secret</Set>
-              <Set name="needClientAuth"><SystemProperty name="jetty.ssl.clientAuth" default="false"/></Set>
-            </New>
-          </Arg>
-          <Set name="port"><SystemProperty name="jetty.ssl.port" default="8984"/></Set>
-          <Set name="maxIdleTime">30000</Set>
-        </New>
-      </Arg>
-    </Call>
-    -->
-
-    <!-- =========================================================== -->
-    <!-- Set handler Collection Structure                            --> 
-    <!-- =========================================================== -->
-    <Set name="handler">
-      <New id="Handlers" class="org.eclipse.jetty.server.handler.HandlerCollection">
-        <Set name="handlers">
-         <Array type="org.eclipse.jetty.server.Handler">
-           <Item>
-             <New id="Contexts" class="org.eclipse.jetty.server.handler.ContextHandlerCollection"/>
-           </Item>
-           <Item>
-             <New id="DefaultHandler" class="org.eclipse.jetty.server.handler.DefaultHandler"/>
-           </Item>
-           <Item>
-             <New id="RequestLog" class="org.eclipse.jetty.server.handler.RequestLogHandler"/>
-           </Item>
-         </Array>
-        </Set>
-      </New>
-    </Set>
-    
-    <!-- =========================================================== -->
-    <!-- Configure Request Log                                       -->
-    <!-- =========================================================== -->
-    <!-- 
-    <Ref id="Handlers">
-      <Call name="addHandler">
-        <Arg>
-          <New id="RequestLog" class="org.eclipse.jetty.server.handler.RequestLogHandler">
-            <Set name="requestLog">
-              <New id="RequestLogImpl" class="org.eclipse.jetty.server.NCSARequestLog">
-                <Set name="filename">
-                   logs/request.yyyy_mm_dd.log
-                </Set>
-                <Set name="filenameDateFormat">yyyy_MM_dd</Set>
-                <Set name="retainDays">90</Set>
-                <Set name="append">true</Set>
-                <Set name="extended">false</Set>
-                <Set name="logCookies">false</Set>
-                <Set name="LogTimeZone">UTC</Set>
-              </New>
-            </Set>
-          </New>
-        </Arg>
-      </Call>
-    </Ref>
-    -->
-
-    <!-- =========================================================== -->
-    <!-- extra options                                               -->
-    <!-- =========================================================== -->
-    <Set name="stopAtShutdown">true</Set>
-    <Set name="sendServerVersion">false</Set>
-    <Set name="sendDateHeader">false</Set>
-    <Set name="gracefulShutdown">1000</Set>
-    <Set name="dumpAfterStart">false</Set>
-    <Set name="dumpBeforeStop">false</Set>
-
-
-
-
-    <Call name="addBean">
-      <Arg>
-        <New id="DeploymentManager" class="org.eclipse.jetty.deploy.DeploymentManager">
-          <Set name="contexts">
-            <Ref id="Contexts" />
-          </Set>
-          <Call name="setContextAttribute">
-            <Arg>org.eclipse.jetty.server.webapp.ContainerIncludeJarPattern</Arg>
-            <Arg>.*/servlet-api-[^/]*\.jar$</Arg>
-          </Call>
-          
-          
-          <!-- Add a customize step to the deployment lifecycle -->
-          <!-- uncomment and replace DebugBinding with your extended AppLifeCycle.Binding class 
-          <Call name="insertLifeCycleNode">
-            <Arg>deployed</Arg>
-            <Arg>starting</Arg>
-            <Arg>customise</Arg>
-          </Call>
-          <Call name="addLifeCycleBinding">
-            <Arg>
-              <New class="org.eclipse.jetty.deploy.bindings.DebugBinding">
-                <Arg>customise</Arg>
-              </New>
-            </Arg>
-          </Call>
-          -->
-          
-        </New>
-      </Arg>
-    </Call>
-    
-    <Ref id="DeploymentManager">
-      <Call name="addAppProvider">
-        <Arg>
-          <New class="org.eclipse.jetty.deploy.providers.ContextProvider">
-            <Set name="monitoredDirName"><SystemProperty name="jetty.home" default="."/>/contexts</Set>
-            <Set name="scanInterval">0</Set>
-          </New>
-        </Arg>
-      </Call>
-    </Ref>
-
-</Configure>

diff --git a/zookeeper/etc/logging.properties b/zookeeper/etc/logging.properties
deleted file mode 100644 (file)
index 063b36f..0000000
--- a/zookeeper/etc/logging.properties
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# To use this log config, start solr with the following system property: 
-# -Djava.util.logging.config.file=etc/logging.properties
-
-## Default global logging level:
-.level = INFO
-
-## Log every update command (add, delete, commit, ...)
-#org.apache.solr.update.processor.LogUpdateProcessor.level = FINE
-
-## Where to log (space separated list).
-handlers = java.util.logging.FileHandler
-
-java.util.logging.FileHandler.level = FINE
-
-java.util.logging.FileHandler.formatter = java.util.logging.SimpleFormatter
-
-# 1 GB limit per file
-java.util.logging.FileHandler.limit = 1073741824
-
-# Log to the logs directory, with log files named solrxxx.log
-java.util.logging.FileHandler.pattern = ./logs/solr%u.log
\ No newline at end of file

diff --git a/zookeeper/etc/solrtest.keystore b/zookeeper/etc/solrtest.keystore
deleted file mode 100644 (file)
index bcc6ec0..0000000
Binary files a/zookeeper/etc/solrtest.keystore and /dev/null differ

diff --git a/zookeeper/etc/webdefault.xml b/zookeeper/etc/webdefault.xml
deleted file mode 100644 (file)
index 213138b..0000000
--- a/zookeeper/etc/webdefault.xml
+++ /dev/null
@@ -1,527 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-  <!-- ===================================================================== -->
-  <!-- This file contains the default descriptor for web applications.       -->
-  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
-  <!-- The intent of this descriptor is to include jetty specific or common  -->
-  <!-- configuration for all webapps.   If a context has a webdefault.xml    -->
-  <!-- descriptor, it is applied before the contexts own web.xml file        -->
-  <!--                                                                       -->
-  <!-- A context may be assigned a default descriptor by:                    -->
-  <!--  + Calling WebApplicationContext.setDefaultsDescriptor                -->
-  <!--  + Passed an arg to addWebApplications                                -->
-  <!--                                                                       -->
-  <!-- This file is used both as the resource within the jetty.jar (which is -->
-  <!-- used as the default if no explicit defaults descriptor is set) and it -->
-  <!-- is copied to the etc directory of the Jetty distro and explicitly     -->
-  <!-- by the jetty.xml file.                                                -->
-  <!--                                                                       -->
-  <!-- ===================================================================== -->
-<web-app
-  xmlns="http://java.sun.com/xml/ns/javaee"
-  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-  xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
-  metadata-complete="true"
-  version="2.5"
->
-
-  <description>
-    Default web.xml file.  
-    This file is applied to a Web application before it's own WEB_INF/web.xml file
-  </description>
-
-  <!-- ==================================================================== -->
-  <!-- Removes static references to beans from javax.el.BeanELResolver to   -->
-  <!-- ensure webapp classloader can be released on undeploy                -->
-  <!-- ==================================================================== -->
-  <listener>
-   <listener-class>org.eclipse.jetty.servlet.listener.ELContextCleaner</listener-class>
-  </listener>
-  
-  <!-- ==================================================================== -->
-  <!-- Removes static cache of Methods from java.beans.Introspector to      -->
-  <!-- ensure webapp classloader can be released on undeploy                -->
-  <!-- ==================================================================== -->  
-  <listener>
-   <listener-class>org.eclipse.jetty.servlet.listener.IntrospectorCleaner</listener-class>
-  </listener>
-  
-
-  <!-- ==================================================================== -->
-  <!-- Context params to control Session Cookies                            -->
-  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
-  <!--
-    UNCOMMENT TO ACTIVATE <context-param> <param-name>org.eclipse.jetty.servlet.SessionDomain</param-name> <param-value>127.0.0.1</param-value> </context-param> <context-param>
-    <param-name>org.eclipse.jetty.servlet.SessionPath</param-name> <param-value>/</param-value> </context-param> <context-param> <param-name>org.eclipse.jetty.servlet.MaxAge</param-name>
-    <param-value>-1</param-value> </context-param>
-  -->
-
-  <!-- ==================================================================== -->
-  <!-- The default servlet.                                                 -->
-  <!-- This servlet, normally mapped to /, provides the handling for static -->
-  <!-- content, OPTIONS and TRACE methods for the context.                  -->
-  <!-- The following initParameters are supported:                          -->
-  <!--  
- *  acceptRanges      If true, range requests and responses are
- *                    supported
- *
- *  dirAllowed        If true, directory listings are returned if no
- *                    welcome file is found. Else 403 Forbidden.
- *
- *  welcomeServlets   If true, attempt to dispatch to welcome files
- *                    that are servlets, but only after no matching static
- *                    resources could be found. If false, then a welcome
- *                    file must exist on disk. If "exact", then exact
- *                    servlet matches are supported without an existing file.
- *                    Default is true.
- *
- *                    This must be false if you want directory listings,
- *                    but have index.jsp in your welcome file list.
- *
- *  redirectWelcome   If true, welcome files are redirected rather than
- *                    forwarded to.
- *
- *  gzip              If set to true, then static content will be served as
- *                    gzip content encoded if a matching resource is
- *                    found ending with ".gz"
- *
- *  resourceBase      Set to replace the context resource base
- *
- *  resourceCache     If set, this is a context attribute name, which the servlet 
- *                    will use to look for a shared ResourceCache instance. 
- *                        
- *  relativeResourceBase
- *                    Set with a pathname relative to the base of the
- *                    servlet context root. Useful for only serving static content out
- *                    of only specific subdirectories.
- *
- *  aliases           If True, aliases of resources are allowed (eg. symbolic
- *                    links and caps variations). May bypass security constraints.
- *
- *  maxCacheSize      The maximum total size of the cache or 0 for no cache.
- *  maxCachedFileSize The maximum size of a file to cache
- *  maxCachedFiles    The maximum number of files to cache
- *
- *  useFileMappedBuffer
- *                    If set to true, it will use mapped file buffer to serve static content
- *                    when using NIO connector. Setting this value to false means that
- *                    a direct buffer will be used instead of a mapped file buffer.
- *                    By default, this is set to true.
- *
- *  cacheControl      If set, all static content will have this value set as the cache-control
- *                    header.
- -->
- 
- 
-  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
-  <servlet>
-    <servlet-name>default</servlet-name>
-    <servlet-class>org.eclipse.jetty.servlet.DefaultServlet</servlet-class>
-    <init-param>
-      <param-name>aliases</param-name>
-      <param-value>false</param-value>
-    </init-param>
-    <init-param>
-      <param-name>acceptRanges</param-name>
-      <param-value>true</param-value>
-    </init-param>
-    <init-param>
-      <param-name>dirAllowed</param-name>
-      <param-value>true</param-value>
-    </init-param>
-    <init-param>
-      <param-name>welcomeServlets</param-name>
-      <param-value>false</param-value>
-    </init-param>
-    <init-param>
-      <param-name>redirectWelcome</param-name>
-      <param-value>false</param-value>
-    </init-param>
-    <init-param>
-      <param-name>maxCacheSize</param-name>
-      <param-value>256000000</param-value>
-    </init-param>
-    <init-param>
-      <param-name>maxCachedFileSize</param-name>
-      <param-value>200000000</param-value>
-    </init-param>
-    <init-param>
-      <param-name>maxCachedFiles</param-name>
-      <param-value>2048</param-value>
-    </init-param>
-    <init-param>
-      <param-name>gzip</param-name>
-      <param-value>true</param-value>
-    </init-param>
-    <init-param>
-      <param-name>useFileMappedBuffer</param-name>
-      <param-value>true</param-value>
-    </init-param>
-    <!--
-    <init-param>
-      <param-name>resourceCache</param-name>
-      <param-value>resourceCache</param-value>
-    </init-param>
-    -->
-    <!--
-    <init-param>
-      <param-name>cacheControl</param-name>
-      <param-value>max-age=3600,public</param-value>
-    </init-param>
-    -->
-    <load-on-startup>0</load-on-startup>
-  </servlet>
-
-  <servlet-mapping>
-    <servlet-name>default</servlet-name>
-    <url-pattern>/</url-pattern>
-  </servlet-mapping>
-
-
-  <!-- ==================================================================== -->
-  <!-- JSP Servlet                                                          -->
-  <!-- This is the jasper JSP servlet from the jakarta project              -->
-  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
-  <!-- The JSP page compiler and execution servlet, which is the mechanism  -->
-  <!-- used by Glassfish to support JSP pages.  Traditionally, this servlet -->
-  <!-- is mapped to URL patterh "*.jsp".  This servlet supports the         -->
-  <!-- following initialization parameters (default values are in square    -->
-  <!-- brackets):                                                           -->
-  <!--                                                                      -->
-  <!--   checkInterval       If development is false and reloading is true, -->
-  <!--                       background compiles are enabled. checkInterval -->
-  <!--                       is the time in seconds between checks to see   -->
-  <!--                       if a JSP page needs to be recompiled. [300]    -->
-  <!--                                                                      -->
-  <!--   compiler            Which compiler Ant should use to compile JSP   -->
-  <!--                       pages.  See the Ant documenation for more      -->
-  <!--                       information. [javac]                           -->
-  <!--                                                                      -->
-  <!--   classdebuginfo      Should the class file be compiled with         -->
-  <!--                       debugging information?  [true]                 -->
-  <!--                                                                      -->
-  <!--   classpath           What class path should I use while compiling   -->
-  <!--                       generated servlets?  [Created dynamically      -->
-  <!--                       based on the current web application]          -->
-  <!--                       Set to ? to make the container explicitly set  -->
-  <!--                       this parameter.                                -->
-  <!--                                                                      -->
-  <!--   development         Is Jasper used in development mode (will check -->
-  <!--                       for JSP modification on every access)?  [true] -->
-  <!--                                                                      -->
-  <!--   enablePooling       Determines whether tag handler pooling is      -->
-  <!--                       enabled  [true]                                -->
-  <!--                                                                      -->
-  <!--   fork                Tell Ant to fork compiles of JSP pages so that -->
-  <!--                       a separate JVM is used for JSP page compiles   -->
-  <!--                       from the one Tomcat is running in. [true]      -->
-  <!--                                                                      -->
-  <!--   ieClassId           The class-id value to be sent to Internet      -->
-  <!--                       Explorer when using <jsp:plugin> tags.         -->
-  <!--                       [clsid:8AD9C840-044E-11D1-B3E9-00805F499D93]   -->
-  <!--                                                                      -->
-  <!--   javaEncoding        Java file encoding to use for generating java  -->
-  <!--                       source files. [UTF-8]                          -->
-  <!--                                                                      -->
-  <!--   keepgenerated       Should we keep the generated Java source code  -->
-  <!--                       for each page instead of deleting it? [true]   -->
-  <!--                                                                      -->
-  <!--   logVerbosityLevel   The level of detailed messages to be produced  -->
-  <!--                       by this servlet.  Increasing levels cause the  -->
-  <!--                       generation of more messages.  Valid values are -->
-  <!--                       FATAL, ERROR, WARNING, INFORMATION, and DEBUG. -->
-  <!--                       [WARNING]                                      -->
-  <!--                                                                      -->
-  <!--   mappedfile          Should we generate static content with one     -->
-  <!--                       print statement per input line, to ease        -->
-  <!--                       debugging?  [false]                            -->
-  <!--                                                                      -->
-  <!--                                                                      -->
-  <!--   reloading           Should Jasper check for modified JSPs?  [true] -->
-  <!--                                                                      -->
-  <!--   suppressSmap        Should the generation of SMAP info for JSR45   -->
-  <!--                       debugging be suppressed?  [false]              -->
-  <!--                                                                      -->
-  <!--   dumpSmap            Should the SMAP info for JSR45 debugging be    -->
-  <!--                       dumped to a file? [false]                      -->
-  <!--                       False if suppressSmap is true                  -->
-  <!--                                                                      -->
-  <!--   scratchdir          What scratch directory should we use when      -->
-  <!--                       compiling JSP pages?  [default work directory  -->
-  <!--                       for the current web application]               -->
-  <!--                                                                      -->
-  <!--   tagpoolMaxSize      The maximum tag handler pool size  [5]         -->
-  <!--                                                                      -->
-  <!--   xpoweredBy          Determines whether X-Powered-By response       -->
-  <!--                       header is added by generated servlet  [false]  -->
-  <!--                                                                      -->
-  <!-- If you wish to use Jikes to compile JSP pages:                       -->
-  <!--   Set the init parameter "compiler" to "jikes".  Define              -->
-  <!--   the property "-Dbuild.compiler.emacs=true" when starting Jetty     -->
-  <!--   to cause Jikes to emit error messages in a format compatible with  -->
-  <!--   Jasper.                                                            -->
-  <!--   If you get an error reporting that jikes can't use UTF-8 encoding, -->
-  <!--   try setting the init parameter "javaEncoding" to "ISO-8859-1".     -->
-  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
-  <servlet
-    id="jsp"
-  >
-    <servlet-name>jsp</servlet-name>
-    <servlet-class>org.apache.jasper.servlet.JspServlet</servlet-class>
-    <init-param>
-      <param-name>logVerbosityLevel</param-name>
-      <param-value>DEBUG</param-value>
-    </init-param>
-    <init-param>
-      <param-name>fork</param-name>
-      <param-value>false</param-value>
-    </init-param>
-    <init-param>
-      <param-name>xpoweredBy</param-name>
-      <param-value>false</param-value>
-    </init-param>
-    <!--  
-    <init-param>
-        <param-name>classpath</param-name>
-        <param-value>?</param-value>
-    </init-param>
-    -->
-    <load-on-startup>0</load-on-startup>
-  </servlet>
-
-  <servlet-mapping>
-    <servlet-name>jsp</servlet-name>
-    <url-pattern>*.jsp</url-pattern>
-    <url-pattern>*.jspf</url-pattern>
-    <url-pattern>*.jspx</url-pattern>
-    <url-pattern>*.xsp</url-pattern>
-    <url-pattern>*.JSP</url-pattern>
-    <url-pattern>*.JSPF</url-pattern>
-    <url-pattern>*.JSPX</url-pattern>
-    <url-pattern>*.XSP</url-pattern>
-  </servlet-mapping>
-
-  <!-- ==================================================================== -->
-  <!-- Dynamic Servlet Invoker.                                             -->
-  <!-- This servlet invokes anonymous servlets that have not been defined   -->
-  <!-- in the web.xml or by other means. The first element of the pathInfo  -->
-  <!-- of a request passed to the envoker is treated as a servlet name for  -->
-  <!-- an existing servlet, or as a class name of a new servlet.            -->
-  <!-- This servlet is normally mapped to /servlet/*                        -->
-  <!-- This servlet support the following initParams:                       -->
-  <!--                                                                      -->
-  <!--  nonContextServlets       If false, the invoker can only load        -->
-  <!--                           servlets from the contexts classloader.    -->
-  <!--                           This is false by default and setting this  -->
-  <!--                           to true may have security implications.    -->
-  <!--                                                                      -->
-  <!--  verbose                  If true, log dynamic loads                 -->
-  <!--                                                                      -->
-  <!--  *                        All other parameters are copied to the     -->
-  <!--                           each dynamic servlet as init parameters    -->
-  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
-  <!--
-    Uncomment for dynamic invocation <servlet> <servlet-name>invoker</servlet-name> <servlet-class>org.eclipse.jetty.servlet.Invoker</servlet-class> <init-param> <param-name>verbose</param-name>
-    <param-value>false</param-value> </init-param> <init-param> <param-name>nonContextServlets</param-name> <param-value>false</param-value> </init-param> <init-param>
-    <param-name>dynamicParam</param-name> <param-value>anyValue</param-value> </init-param> <load-on-startup>0</load-on-startup> </servlet> <servlet-mapping> <servlet-name>invoker</servlet-name>
-    <url-pattern>/servlet/*</url-pattern> </servlet-mapping>
-  -->
-
-
-
-  <!-- ==================================================================== -->
-  <session-config>
-    <session-timeout>30</session-timeout>
-  </session-config>
-
-  <!-- ==================================================================== -->
-  <!-- Default MIME mappings                                                -->
-  <!-- The default MIME mappings are provided by the mime.properties        -->
-  <!-- resource in the org.eclipse.jetty.server.jar file.  Additional or modified  -->
-  <!-- mappings may be specified here                                       -->
-  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
-  <!-- UNCOMMENT TO ACTIVATE
-  <mime-mapping>
-    <extension>mysuffix</extension>
-    <mime-type>mymime/type</mime-type>
-  </mime-mapping>
-  -->
-
-  <!-- ==================================================================== -->
-  <welcome-file-list>
-    <welcome-file>index.html</welcome-file>
-    <welcome-file>index.htm</welcome-file>
-    <welcome-file>index.jsp</welcome-file>
-  </welcome-file-list>
-
-  <!-- ==================================================================== -->
-  <locale-encoding-mapping-list>
-    <locale-encoding-mapping>
-      <locale>ar</locale>
-      <encoding>ISO-8859-6</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>be</locale>
-      <encoding>ISO-8859-5</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>bg</locale>
-      <encoding>ISO-8859-5</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>ca</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>cs</locale>
-      <encoding>ISO-8859-2</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>da</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>de</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>el</locale>
-      <encoding>ISO-8859-7</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>en</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>es</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>et</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>fi</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>fr</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>hr</locale>
-      <encoding>ISO-8859-2</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>hu</locale>
-      <encoding>ISO-8859-2</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>is</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>it</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>iw</locale>
-      <encoding>ISO-8859-8</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>ja</locale>
-      <encoding>Shift_JIS</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>ko</locale>
-      <encoding>EUC-KR</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>lt</locale>
-      <encoding>ISO-8859-2</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>lv</locale>
-      <encoding>ISO-8859-2</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>mk</locale>
-      <encoding>ISO-8859-5</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>nl</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>no</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>pl</locale>
-      <encoding>ISO-8859-2</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>pt</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>ro</locale>
-      <encoding>ISO-8859-2</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>ru</locale>
-      <encoding>ISO-8859-5</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>sh</locale>
-      <encoding>ISO-8859-5</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>sk</locale>
-      <encoding>ISO-8859-2</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>sl</locale>
-      <encoding>ISO-8859-2</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>sq</locale>
-      <encoding>ISO-8859-2</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>sr</locale>
-      <encoding>ISO-8859-5</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>sv</locale>
-      <encoding>ISO-8859-1</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>tr</locale>
-      <encoding>ISO-8859-9</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>uk</locale>
-      <encoding>ISO-8859-5</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>zh</locale>
-      <encoding>GB2312</encoding>
-    </locale-encoding-mapping>
-    <locale-encoding-mapping>
-      <locale>zh_TW</locale>
-      <encoding>Big5</encoding>
-    </locale-encoding-mapping>
-  </locale-encoding-mapping-list>
-
-  <security-constraint>
-    <web-resource-collection>
-      <web-resource-name>Disable TRACE</web-resource-name>
-      <url-pattern>/</url-pattern>
-      <http-method>TRACE</http-method>
-    </web-resource-collection>
-    <auth-constraint/>
-  </security-constraint>
-
-</web-app>
-

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/currency.xml b/zookeeper/example-schemaless/solr/collection1/conf/currency.xml
deleted file mode 100644 (file)
index 3a9c58a..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/currency.xml
+++ /dev/null
@@ -1,67 +0,0 @@
-<?xml version="1.0" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- Example exchange rates file for CurrencyField type named "currency" in example schema -->
-
-<currencyConfig version="1.0">
-  <rates>
-    <!-- Updated from http://www.exchangerate.com/ at 2011-09-27 -->
-    <rate from="USD" to="ARS" rate="4.333871" comment="ARGENTINA Peso" />
-    <rate from="USD" to="AUD" rate="1.025768" comment="AUSTRALIA Dollar" />
-    <rate from="USD" to="EUR" rate="0.743676" comment="European Euro" />
-    <rate from="USD" to="BRL" rate="1.881093" comment="BRAZIL Real" />
-    <rate from="USD" to="CAD" rate="1.030815" comment="CANADA Dollar" />
-    <rate from="USD" to="CLP" rate="519.0996" comment="CHILE Peso" />
-    <rate from="USD" to="CNY" rate="6.387310" comment="CHINA Yuan" />
-    <rate from="USD" to="CZK" rate="18.47134" comment="CZECH REP. Koruna" />
-    <rate from="USD" to="DKK" rate="5.515436" comment="DENMARK Krone" />
-    <rate from="USD" to="HKD" rate="7.801922" comment="HONG KONG Dollar" />
-    <rate from="USD" to="HUF" rate="215.6169" comment="HUNGARY Forint" />
-    <rate from="USD" to="ISK" rate="118.1280" comment="ICELAND Krona" />
-    <rate from="USD" to="INR" rate="49.49088" comment="INDIA Rupee" />
-    <rate from="USD" to="XDR" rate="0.641358" comment="INTNL MON. FUND SDR" />
-    <rate from="USD" to="ILS" rate="3.709739" comment="ISRAEL Sheqel" />
-    <rate from="USD" to="JPY" rate="76.32419" comment="JAPAN Yen" />
-    <rate from="USD" to="KRW" rate="1169.173" comment="KOREA (SOUTH) Won" />
-    <rate from="USD" to="KWD" rate="0.275142" comment="KUWAIT Dinar" />
-    <rate from="USD" to="MXN" rate="13.85895" comment="MEXICO Peso" />
-    <rate from="USD" to="NZD" rate="1.285159" comment="NEW ZEALAND Dollar" />
-    <rate from="USD" to="NOK" rate="5.859035" comment="NORWAY Krone" />
-    <rate from="USD" to="PKR" rate="87.57007" comment="PAKISTAN Rupee" />
-    <rate from="USD" to="PEN" rate="2.730683" comment="PERU Sol" />
-    <rate from="USD" to="PHP" rate="43.62039" comment="PHILIPPINES Peso" />
-    <rate from="USD" to="PLN" rate="3.310139" comment="POLAND Zloty" />
-    <rate from="USD" to="RON" rate="3.100932" comment="ROMANIA Leu" />
-    <rate from="USD" to="RUB" rate="32.14663" comment="RUSSIA Ruble" />
-    <rate from="USD" to="SAR" rate="3.750465" comment="SAUDI ARABIA Riyal" />
-    <rate from="USD" to="SGD" rate="1.299352" comment="SINGAPORE Dollar" />
-    <rate from="USD" to="ZAR" rate="8.329761" comment="SOUTH AFRICA Rand" />
-    <rate from="USD" to="SEK" rate="6.883442" comment="SWEDEN Krona" />
-    <rate from="USD" to="CHF" rate="0.906035" comment="SWITZERLAND Franc" />
-    <rate from="USD" to="TWD" rate="30.40283" comment="TAIWAN Dollar" />
-    <rate from="USD" to="THB" rate="30.89487" comment="THAILAND Baht" />
-    <rate from="USD" to="AED" rate="3.672955" comment="U.A.E. Dirham" />
-    <rate from="USD" to="UAH" rate="7.988582" comment="UKRAINE Hryvnia" />
-    <rate from="USD" to="GBP" rate="0.647910" comment="UNITED KINGDOM Pound" />
-    
-    <!-- Cross-rates for some common currencies -->
-    <rate from="EUR" to="GBP" rate="0.869914" />  
-    <rate from="EUR" to="NOK" rate="7.800095" />  
-    <rate from="GBP" to="NOK" rate="8.966508" />  
-  </rates>
-</currencyConfig>

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/elevate.xml b/zookeeper/example-schemaless/solr/collection1/conf/elevate.xml
deleted file mode 100644 (file)
index 25d5ceb..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/elevate.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- If this file is found in the config directory, it will only be
-     loaded once at startup.  If it is found in Solr's data
-     directory, it will be re-loaded every commit.
-
-   See http://wiki.apache.org/solr/QueryElevationComponent for more info
-
--->
-<elevate>
- <query text="foo bar">
-  <doc id="1" />
-  <doc id="2" />
-  <doc id="3" />
- </query>
- 
- <query text="ipod">
-   <doc id="MA147LL/A" />  <!-- put the actual ipod at the top -->
-   <doc id="IW-02" exclude="true" /> <!-- exclude this cable -->
- </query>
- 
-</elevate>

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_ca.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_ca.txt
deleted file mode 100644 (file)
index 307a85f..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_ca.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-# Set of Catalan contractions for ElisionFilter
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-d
-l
-m
-n
-s
-t

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_fr.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_fr.txt
deleted file mode 100644 (file)
index f1bba51..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_fr.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-# Set of French contractions for ElisionFilter
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-l
-m
-t
-qu
-n
-s
-j
-d
-c
-jusqu
-quoiqu
-lorsqu
-puisqu

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_ga.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_ga.txt
deleted file mode 100644 (file)
index 9ebe7fa..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_ga.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-# Set of Irish contractions for ElisionFilter
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-d
-m
-b

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_it.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_it.txt
deleted file mode 100644 (file)
index cac0409..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/contractions_it.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-# Set of Italian contractions for ElisionFilter
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-c
-l 
-all 
-dall 
-dell 
-nell 
-sull 
-coll 
-pell 
-gl 
-agl 
-dagl 
-degl 
-negl 
-sugl 
-un 
-m 
-t 
-s 
-v 
-d

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/hyphenations_ga.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/hyphenations_ga.txt
deleted file mode 100644 (file)
index 4d2642c..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/hyphenations_ga.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-# Set of Irish hyphenations for StopFilter
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-h
-n
-t

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stemdict_nl.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stemdict_nl.txt
deleted file mode 100644 (file)
index 4410729..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stemdict_nl.txt
+++ /dev/null
@@ -1,6 +0,0 @@
-# Set of overrides for the dutch stemmer
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-fiets  fiets
-bromfiets      bromfiets
-ei     eier
-kind   kinder

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stoptags_ja.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stoptags_ja.txt
deleted file mode 100644 (file)
index 71b7508..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stoptags_ja.txt
+++ /dev/null
@@ -1,420 +0,0 @@
-#
-# This file defines a Japanese stoptag set for JapanesePartOfSpeechStopFilter.
-#
-# Any token with a part-of-speech tag that exactly matches those defined in this
-# file are removed from the token stream.
-#
-# Set your own stoptags by uncommenting the lines below.  Note that comments are
-# not allowed on the same line as a stoptag.  See LUCENE-3745 for frequency lists,
-# etc. that can be useful for building you own stoptag set.
-#
-# The entire possible tagset is provided below for convenience.
-#
-#####
-#  noun: unclassified nouns
-#名詞
-#
-#  noun-common: Common nouns or nouns where the sub-classification is undefined
-#名詞-一般
-#
-#  noun-proper: Proper nouns where the sub-classification is undefined 
-#名詞-固有名詞
-#
-#  noun-proper-misc: miscellaneous proper nouns
-#名詞-固有名詞-一般
-#
-#  noun-proper-person: Personal names where the sub-classification is undefined
-#名詞-固有名詞-人名
-#
-#  noun-proper-person-misc: names that cannot be divided into surname and 
-#  given name; foreign names; names where the surname or given name is unknown.
-#  e.g. お市の方
-#名詞-固有名詞-人名-一般
-#
-#  noun-proper-person-surname: Mainly Japanese surnames.
-#  e.g. 山田
-#名詞-固有名詞-人名-姓
-#
-#  noun-proper-person-given_name: Mainly Japanese given names.
-#  e.g. 太郎
-#名詞-固有名詞-人名-名
-#
-#  noun-proper-organization: Names representing organizations.
-#  e.g. 通産省, NHK
-#名詞-固有名詞-組織
-#
-#  noun-proper-place: Place names where the sub-classification is undefined
-#名詞-固有名詞-地域
-#
-#  noun-proper-place-misc: Place names excluding countries.
-#  e.g. アジア, バルセロナ, 京都
-#名詞-固有名詞-地域-一般
-#
-#  noun-proper-place-country: Country names. 
-#  e.g. 日本, オーストラリア
-#名詞-固有名詞-地域-国
-#
-#  noun-pronoun: Pronouns where the sub-classification is undefined
-#名詞-代名詞
-#
-#  noun-pronoun-misc: miscellaneous pronouns: 
-#  e.g. それ, ここ, あいつ, あなた, あちこち, いくつ, どこか, なに, みなさん, みんな, わたくし, われわれ
-#名詞-代名詞-一般
-#
-#  noun-pronoun-contraction: Spoken language contraction made by combining a 
-#  pronoun and the particle 'wa'.
-#  e.g. ありゃ, こりゃ, こりゃあ, そりゃ, そりゃあ 
-#名詞-代名詞-縮約
-#
-#  noun-adverbial: Temporal nouns such as names of days or months that behave 
-#  like adverbs. Nouns that represent amount or ratios and can be used adverbially,
-#  e.g. 金曜, 一月, 午後, 少量
-#名詞-副詞可能
-#
-#  noun-verbal: Nouns that take arguments with case and can appear followed by 
-#  'suru' and related verbs (する, できる, なさる, くださる)
-#  e.g. インプット, 愛着, 悪化, 悪戦苦闘, 一安心, 下取り
-#名詞-サ変接続
-#
-#  noun-adjective-base: The base form of adjectives, words that appear before な ("na")
-#  e.g. 健康, 安易, 駄目, だめ
-#名詞-形容動詞語幹
-#
-#  noun-numeric: Arabic numbers, Chinese numerals, and counters like 何 (回), 数.
-#  e.g. 0, 1, 2, 何, 数, 幾
-#名詞-数
-#
-#  noun-affix: noun affixes where the sub-classification is undefined
-#名詞-非自立
-#
-#  noun-affix-misc: Of adnominalizers, the case-marker の ("no"), and words that 
-#  attach to the base form of inflectional words, words that cannot be classified 
-#  into any of the other categories below. This category includes indefinite nouns.
-#  e.g. あかつき, 暁, かい, 甲斐, 気, きらい, 嫌い, くせ, 癖, こと, 事, ごと, 毎, しだい, 次第, 
-#       順, せい, 所為, ついで, 序で, つもり, 積もり, 点, どころ, の, はず, 筈, はずみ, 弾み, 
-#       拍子, ふう, ふり, 振り, ほう, 方, 旨, もの, 物, 者, ゆえ, 故, ゆえん, 所以, わけ, 訳,
-#       わり, 割り, 割, ん-口語/, もん-口語/
-#名詞-非自立-一般
-#
-#  noun-affix-adverbial: noun affixes that that can behave as adverbs.
-#  e.g. あいだ, 間, あげく, 挙げ句, あと, 後, 余り, 以外, 以降, 以後, 以上, 以前, 一方, うえ, 
-#       上, うち, 内, おり, 折り, かぎり, 限り, きり, っきり, 結果, ころ, 頃, さい, 際, 最中, さなか, 
-#       最中, じたい, 自体, たび, 度, ため, 為, つど, 都度, とおり, 通り, とき, 時, ところ, 所, 
-#       とたん, 途端, なか, 中, のち, 後, ばあい, 場合, 日, ぶん, 分, ほか, 他, まえ, 前, まま, 
-#       儘, 侭, みぎり, 矢先
-#名詞-非自立-副詞可能
-#
-#  noun-affix-aux: noun affixes treated as 助動詞 ("auxiliary verb") in school grammars 
-#  with the stem よう(だ) ("you(da)").
-#  e.g.  よう, やう, 様 (よう)
-#名詞-非自立-助動詞語幹
-#  
-#  noun-affix-adjective-base: noun affixes that can connect to the indeclinable
-#  connection form な (aux "da").
-#  e.g. みたい, ふう
-#名詞-非自立-形容動詞語幹
-#
-#  noun-special: special nouns where the sub-classification is undefined.
-#名詞-特殊
-#
-#  noun-special-aux: The そうだ ("souda") stem form that is used for reporting news, is 
-#  treated as 助動詞 ("auxiliary verb") in school grammars, and attach to the base 
-#  form of inflectional words.
-#  e.g. そう
-#名詞-特殊-助動詞語幹
-#
-#  noun-suffix: noun suffixes where the sub-classification is undefined.
-#名詞-接尾
-#
-#  noun-suffix-misc: Of the nouns or stem forms of other parts of speech that connect 
-#  to ガル or タイ and can combine into compound nouns, words that cannot be classified into
-#  any of the other categories below. In general, this category is more inclusive than 
-#  接尾語 ("suffix") and is usually the last element in a compound noun.
-#  e.g. おき, かた, 方, 甲斐 (がい), がかり, ぎみ, 気味, ぐるみ, (～した) さ, 次第, 済 (ず) み,
-#       よう, (でき)っこ, 感, 観, 性, 学, 類, 面, 用
-#名詞-接尾-一般
-#
-#  noun-suffix-person: Suffixes that form nouns and attach to person names more often
-#  than other nouns.
-#  e.g. 君, 様, 著
-#名詞-接尾-人名
-#
-#  noun-suffix-place: Suffixes that form nouns and attach to place names more often 
-#  than other nouns.
-#  e.g. 町, 市, 県
-#名詞-接尾-地域
-#
-#  noun-suffix-verbal: Of the suffixes that attach to nouns and form nouns, those that 
-#  can appear before スル ("suru").
-#  e.g. 化, 視, 分け, 入り, 落ち, 買い
-#名詞-接尾-サ変接続
-#
-#  noun-suffix-aux: The stem form of そうだ (様態) that is used to indicate conditions, 
-#  is treated as 助動詞 ("auxiliary verb") in school grammars, and attach to the 
-#  conjunctive form of inflectional words.
-#  e.g. そう
-#名詞-接尾-助動詞語幹
-#
-#  noun-suffix-adjective-base: Suffixes that attach to other nouns or the conjunctive 
-#  form of inflectional words and appear before the copula だ ("da").
-#  e.g. 的, げ, がち
-#名詞-接尾-形容動詞語幹
-#
-#  noun-suffix-adverbial: Suffixes that attach to other nouns and can behave as adverbs.
-#  e.g. 後 (ご), 以後, 以降, 以前, 前後, 中, 末, 上, 時 (じ)
-#名詞-接尾-副詞可能
-#
-#  noun-suffix-classifier: Suffixes that attach to numbers and form nouns. This category 
-#  is more inclusive than 助数詞 ("classifier") and includes common nouns that attach 
-#  to numbers.
-#  e.g. 個, つ, 本, 冊, パーセント, cm, kg, カ月, か国, 区画, 時間, 時半
-#名詞-接尾-助数詞
-#
-#  noun-suffix-special: Special suffixes that mainly attach to inflecting words.
-#  e.g. (楽し) さ, (考え) 方
-#名詞-接尾-特殊
-#
-#  noun-suffix-conjunctive: Nouns that behave like conjunctions and join two words 
-#  together.
-#  e.g. (日本) 対 (アメリカ), 対 (アメリカ), (3) 対 (5), (女優) 兼 (主婦)
-#名詞-接続詞的
-#
-#  noun-verbal_aux: Nouns that attach to the conjunctive particle て ("te") and are 
-#  semantically verb-like.
-#  e.g. ごらん, ご覧, 御覧, 頂戴
-#名詞-動詞非自立的
-#
-#  noun-quotation: text that cannot be segmented into words, proverbs, Chinese poetry, 
-#  dialects, English, etc. Currently, the only entry for 名詞 引用文字列 ("noun quotation") 
-#  is いわく ("iwaku").
-#名詞-引用文字列
-#
-#  noun-nai_adjective: Words that appear before the auxiliary verb ない ("nai") and
-#  behave like an adjective.
-#  e.g. 申し訳, 仕方, とんでも, 違い
-#名詞-ナイ形容詞語幹
-#
-#####
-#  prefix: unclassified prefixes
-#接頭詞
-#
-#  prefix-nominal: Prefixes that attach to nouns (including adjective stem forms) 
-#  excluding numerical expressions.
-#  e.g. お (水), 某 (氏), 同 (社), 故 (～氏), 高 (品質), お (見事), ご (立派)
-#接頭詞-名詞接続
-#
-#  prefix-verbal: Prefixes that attach to the imperative form of a verb or a verb
-#  in conjunctive form followed by なる/なさる/くださる.
-#  e.g. お (読みなさい), お (座り)
-#接頭詞-動詞接続
-#
-#  prefix-adjectival: Prefixes that attach to adjectives.
-#  e.g. お (寒いですねえ), バカ (でかい)
-#接頭詞-形容詞接続
-#
-#  prefix-numerical: Prefixes that attach to numerical expressions.
-#  e.g. 約, およそ, 毎時
-#接頭詞-数接続
-#
-#####
-#  verb: unclassified verbs
-#動詞
-#
-#  verb-main:
-#動詞-自立
-#
-#  verb-auxiliary:
-#動詞-非自立
-#
-#  verb-suffix:
-#動詞-接尾
-#
-#####
-#  adjective: unclassified adjectives
-#形容詞
-#
-#  adjective-main:
-#形容詞-自立
-#
-#  adjective-auxiliary:
-#形容詞-非自立
-#
-#  adjective-suffix:
-#形容詞-接尾
-#
-#####
-#  adverb: unclassified adverbs
-#副詞
-#
-#  adverb-misc: Words that can be segmented into one unit and where adnominal 
-#  modification is not possible.
-#  e.g. あいかわらず, 多分
-#副詞-一般
-#
-#  adverb-particle_conjunction: Adverbs that can be followed by の, は, に, 
-#  な, する, だ, etc.
-#  e.g. こんなに, そんなに, あんなに, なにか, なんでも
-#副詞-助詞類接続
-#
-#####
-#  adnominal: Words that only have noun-modifying forms.
-#  e.g. この, その, あの, どの, いわゆる, なんらかの, 何らかの, いろんな, こういう, そういう, ああいう, 
-#       どういう, こんな, そんな, あんな, どんな, 大きな, 小さな, おかしな, ほんの, たいした, 
-#       「(, も) さる (ことながら)」, 微々たる, 堂々たる, 単なる, いかなる, 我が」「同じ, 亡き
-#連体詞
-#
-#####
-#  conjunction: Conjunctions that can occur independently.
-#  e.g. が, けれども, そして, じゃあ, それどころか
-接続詞
-#
-#####
-#  particle: unclassified particles.
-助詞
-#
-#  particle-case: case particles where the subclassification is undefined.
-助詞-格助詞
-#
-#  particle-case-misc: Case particles.
-#  e.g. から, が, で, と, に, へ, より, を, の, にて
-助詞-格助詞-一般
-#
-#  particle-case-quote: the "to" that appears after nouns, a person’s speech, 
-#  quotation marks, expressions of decisions from a meeting, reasons, judgements,
-#  conjectures, etc.
-#  e.g. ( だ) と (述べた.), ( である) と (して執行猶予...)
-助詞-格助詞-引用
-#
-#  particle-case-compound: Compounds of particles and verbs that mainly behave 
-#  like case particles.
-#  e.g. という, といった, とかいう, として, とともに, と共に, でもって, にあたって, に当たって, に当って,
-#       にあたり, に当たり, に当り, に当たる, にあたる, において, に於いて,に於て, における, に於ける, 
-#       にかけ, にかけて, にかんし, に関し, にかんして, に関して, にかんする, に関する, に際し, 
-#       に際して, にしたがい, に従い, に従う, にしたがって, に従って, にたいし, に対し, にたいして, 
-#       に対して, にたいする, に対する, について, につき, につけ, につけて, につれ, につれて, にとって,
-#       にとり, にまつわる, によって, に依って, に因って, により, に依り, に因り, による, に依る, に因る, 
-#       にわたって, にわたる, をもって, を以って, を通じ, を通じて, を通して, をめぐって, をめぐり, をめぐる,
-#       って-口語/, ちゅう-関西弁「という」/, (何) ていう (人)-口語/, っていう-口語/, といふ, とかいふ
-助詞-格助詞-連語
-#
-#  particle-conjunctive:
-#  e.g. から, からには, が, けれど, けれども, けど, し, つつ, て, で, と, ところが, どころか, とも, ども, 
-#       ながら, なり, ので, のに, ば, ものの, や ( した), やいなや, (ころん) じゃ(いけない)-口語/, 
-#       (行っ) ちゃ(いけない)-口語/, (言っ) たって (しかたがない)-口語/, (それがなく)ったって (平気)-口語/
-助詞-接続助詞
-#
-#  particle-dependency:
-#  e.g. こそ, さえ, しか, すら, は, も, ぞ
-助詞-係助詞
-#
-#  particle-adverbial:
-#  e.g. がてら, かも, くらい, 位, ぐらい, しも, (学校) じゃ(これが流行っている)-口語/, 
-#       (それ)じゃあ (よくない)-口語/, ずつ, (私) なぞ, など, (私) なり (に), (先生) なんか (大嫌い)-口語/,
-#       (私) なんぞ, (先生) なんて (大嫌い)-口語/, のみ, だけ, (私) だって-口語/, だに, 
-#       (彼)ったら-口語/, (お茶) でも (いかが), 等 (とう), (今後) とも, ばかり, ばっか-口語/, ばっかり-口語/,
-#       ほど, 程, まで, 迄, (誰) も (が)([助詞-格助詞] および [助詞-係助詞] の前に位置する「も」)
-助詞-副助詞
-#
-#  particle-interjective: particles with interjective grammatical roles.
-#  e.g. (松島) や
-助詞-間投助詞
-#
-#  particle-coordinate:
-#  e.g. と, たり, だの, だり, とか, なり, や, やら
-助詞-並立助詞
-#
-#  particle-final:
-#  e.g. かい, かしら, さ, ぜ, (だ)っけ-口語/, (とまってる) で-方言/, な, ナ, なあ-口語/, ぞ, ね, ネ, 
-#       ねぇ-口語/, ねえ-口語/, ねん-方言/, の, のう-口語/, や, よ, ヨ, よぉ-口語/, わ, わい-口語/
-助詞-終助詞
-#
-#  particle-adverbial/conjunctive/final: The particle "ka" when unknown whether it is 
-#  adverbial, conjunctive, or sentence final. For example:
-#       (a) 「A か B か」. Ex:「(国内で運用する) か,(海外で運用する) か (.)」
-#       (b) Inside an adverb phrase. Ex:「(幸いという) か (, 死者はいなかった.)」
-#           「(祈りが届いたせい) か (, 試験に合格した.)」
-#       (c) 「かのように」. Ex:「(何もなかった) か (のように振る舞った.)」
-#  e.g. か
-助詞-副助詞／並立助詞／終助詞
-#
-#  particle-adnominalizer: The "no" that attaches to nouns and modifies 
-#  non-inflectional words.
-助詞-連体化
-#
-#  particle-adnominalizer: The "ni" and "to" that appear following nouns and adverbs 
-#  that are giongo, giseigo, or gitaigo.
-#  e.g. に, と
-助詞-副詞化
-#
-#  particle-special: A particle that does not fit into one of the above classifications. 
-#  This includes particles that are used in Tanka, Haiku, and other poetry.
-#  e.g. かな, けむ, ( しただろう) に, (あんた) にゃ(わからん), (俺) ん (家)
-助詞-特殊
-#
-#####
-#  auxiliary-verb:
-助動詞
-#
-#####
-#  interjection: Greetings and other exclamations.
-#  e.g. おはよう, おはようございます, こんにちは, こんばんは, ありがとう, どうもありがとう, ありがとうございます, 
-#       いただきます, ごちそうさま, さよなら, さようなら, はい, いいえ, ごめん, ごめんなさい
-#感動詞
-#
-#####
-#  symbol: unclassified Symbols.
-記号
-#
-#  symbol-misc: A general symbol not in one of the categories below.
-#  e.g. [○◎@$〒→+]
-記号-一般
-#
-#  symbol-comma: Commas
-#  e.g. [,、]
-記号-読点
-#
-#  symbol-period: Periods and full stops.
-#  e.g. [.．。]
-記号-句点
-#
-#  symbol-space: Full-width whitespace.
-記号-空白
-#
-#  symbol-open_bracket:
-#  e.g. [({‘“『【]
-記号-括弧開
-#
-#  symbol-close_bracket:
-#  e.g. [)}’”』」】]
-記号-括弧閉
-#
-#  symbol-alphabetic:
-#記号-アルファベット
-#
-#####
-#  other: unclassified other
-#その他
-#
-#  other-interjection: Words that are hard to classify as noun-suffixes or 
-#  sentence-final particles.
-#  e.g. (だ)ァ
-その他-間投
-#
-#####
-#  filler: Aizuchi that occurs during a conversation or sounds inserted as filler.
-#  e.g. あの, うんと, えと
-フィラー
-#
-#####
-#  non-verbal: non-verbal sound.
-非言語音
-#
-#####
-#  fragment:
-#語断片
-#
-#####
-#  unknown: unknown part of speech.
-#未知語
-#
-##### End of file

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ar.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ar.txt
deleted file mode 100644 (file)
index 046829d..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ar.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-# This file was created by Jacques Savoy and is distributed under the BSD license.
-# See http://members.unine.ch/jacques.savoy/clef/index.html.
-# Also see http://www.opensource.org/licenses/bsd-license.html
-# Cleaned on October 11, 2009 (not normalized, so use before normalization)
-# This means that when modifying this list, you might need to add some 
-# redundant entries, for example containing forms with both أ and ا
-من
-ومن
-منها
-منه
-في
-وفي
-فيها
-فيه
-و
-ف
-ثم
-او
-أو
-ب
-بها
-به
-ا
-أ
-اى
-اي
-أي
-أى
-لا
-ولا
-الا
-ألا
-إلا
-لكن
-ما
-وما
-كما
-فما
-عن
-مع
-اذا
-إذا
-ان
-أن
-إن
-انها
-أنها
-إنها
-انه
-أنه
-إنه
-بان
-بأن
-فان
-فأن
-وان
-وأن
-وإن
-التى
-التي
-الذى
-الذي
-الذين
-الى
-الي
-إلى
-إلي
-على
-عليها
-عليه
-اما
-أما
-إما
-ايضا
-أيضا
-كل
-وكل
-لم
-ولم
-لن
-ولن
-هى
-هي
-هو
-وهى
-وهي
-وهو
-فهى
-فهي
-فهو
-انت
-أنت
-لك
-لها
-له
-هذه
-هذا
-تلك
-ذلك
-هناك
-كانت
-كان
-يكون
-تكون
-وكانت
-وكان
-غير
-بعض
-قد
-نحو
-بين
-بينما
-منذ
-ضمن
-حيث
-الان
-الآن
-خلال
-بعد
-قبل
-حتى
-عند
-عندما
-لدى
-جميع

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_bg.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_bg.txt
deleted file mode 100644 (file)
index 1ae4ba2..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_bg.txt
+++ /dev/null
@@ -1,193 +0,0 @@
-# This file was created by Jacques Savoy and is distributed under the BSD license.
-# See http://members.unine.ch/jacques.savoy/clef/index.html.
-# Also see http://www.opensource.org/licenses/bsd-license.html
-а
-аз
-ако
-ала
-бе
-без
-беше
-би
-бил
-била
-били
-било
-близо
-бъдат
-бъде
-бяха
-в
-вас
-ваш
-ваша
-вероятно
-вече
-взема
-ви
-вие
-винаги
-все
-всеки
-всички
-всичко
-всяка
-във
-въпреки
-върху
-г
-ги
-главно
-го
-д
-да
-дали
-до
-докато
-докога
-дори
-досега
-доста
-е
-едва
-един
-ето
-за
-зад
-заедно
-заради
-засега
-затова
-защо
-защото
-и
-из
-или
-им
-има
-имат
-иска
-й
-каза
-как
-каква
-какво
-както
-какъв
-като
-кога
-когато
-което
-които
-кой
-който
-колко
-която
-къде
-където
-към
-ли
-м
-ме
-между
-мен
-ми
-мнозина
-мога
-могат
-може
-моля
-момента
-му
-н
-на
-над
-назад
-най
-направи
-напред
-например
-нас
-не
-него
-нея
-ни
-ние
-никой
-нито
-но
-някои
-някой
-няма
-обаче
-около
-освен
-особено
-от
-отгоре
-отново
-още
-пак
-по
-повече
-повечето
-под
-поне
-поради
-после
-почти
-прави
-пред
-преди
-през
-при
-пък
-първо
-с
-са
-само
-се
-сега
-си
-скоро
-след
-сме
-според
-сред
-срещу
-сте
-съм
-със
-също
-т
-тази
-така
-такива
-такъв
-там
-твой
-те
-тези
-ти
-тн
-то
-това
-тогава
-този
-той
-толкова
-точно
-трябва
-тук
-тъй
-тя
-тях
-у
-харесва
-ч
-че
-често
-чрез
-ще
-щом
-я

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ca.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ca.txt
deleted file mode 100644 (file)
index 3da65de..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ca.txt
+++ /dev/null
@@ -1,220 +0,0 @@
-# Catalan stopwords from http://github.com/vcl/cue.language (Apache 2 Licensed)
-a
-abans
-ací
-ah
-així
-això
-al
-als
-aleshores
-algun
-alguna
-algunes
-alguns
-alhora
-allà
-allí
-allò
-altra
-altre
-altres
-amb
-ambdós
-ambdues
-apa
-aquell
-aquella
-aquelles
-aquells
-aquest
-aquesta
-aquestes
-aquests
-aquí
-baix
-cada
-cadascú
-cadascuna
-cadascunes
-cadascuns
-com
-contra
-d'un
-d'una
-d'unes
-d'uns
-dalt
-de
-del
-dels
-des
-després
-dins
-dintre
-donat
-doncs
-durant
-e
-eh
-el
-els
-em
-en
-encara
-ens
-entre
-érem
-eren
-éreu
-es
-és
-esta
-està
-estàvem
-estaven
-estàveu
-esteu
-et
-etc
-ets
-fins
-fora
-gairebé
-ha
-han
-has
-havia
-he
-hem
-heu
-hi 
-ho
-i
-igual
-iguals
-ja
-l'hi
-la
-les
-li
-li'n
-llavors
-m'he
-ma
-mal
-malgrat
-mateix
-mateixa
-mateixes
-mateixos
-me
-mentre
-més
-meu
-meus
-meva
-meves
-molt
-molta
-moltes
-molts
-mon
-mons
-n'he
-n'hi
-ne
-ni
-no
-nogensmenys
-només
-nosaltres
-nostra
-nostre
-nostres
-o
-oh
-oi
-on
-pas
-pel
-pels
-per
-però
-perquè
-poc 
-poca
-pocs
-poques
-potser
-propi
-qual
-quals
-quan
-quant 
-que
-què
-quelcom
-qui
-quin
-quina
-quines
-quins
-s'ha
-s'han
-sa
-semblant
-semblants
-ses
-seu 
-seus
-seva
-seva
-seves
-si
-sobre
-sobretot
-sóc
-solament
-sols
-son 
-són
-sons 
-sota
-sou
-t'ha
-t'han
-t'he
-ta
-tal
-també
-tampoc
-tan
-tant
-tanta
-tantes
-teu
-teus
-teva
-teves
-ton
-tons
-tot
-tota
-totes
-tots
-un
-una
-unes
-uns
-us
-va
-vaig
-vam
-van
-vas
-veu
-vosaltres
-vostra
-vostre
-vostres

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_cz.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_cz.txt
deleted file mode 100644 (file)
index 53c6097..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_cz.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-a
-s
-k
-o
-i
-u
-v
-z
-dnes
-cz
-tímto
-budeš
-budem
-byli
-jseš
-můj
-svým
-ta
-tomto
-tohle
-tuto
-tyto
-jej
-zda
-proč
-máte
-tato
-kam
-tohoto
-kdo
-kteří
-mi
-nám
-tom
-tomuto
-mít
-nic
-proto
-kterou
-byla
-toho
-protože
-asi
-ho
-naši
-napište
-re
-což
-tím
-takže
-svých
-její
-svými
-jste
-aj
-tu
-tedy
-teto
-bylo
-kde
-ke
-pravé
-ji
-nad
-nejsou
-či
-pod
-téma
-mezi
-přes
-ty
-pak
-vám
-ani
-když
-však
-neg
-jsem
-tento
-článku
-články
-aby
-jsme
-před
-pta
-jejich
-byl
-ještě
-až
-bez
-také
-pouze
-první
-vaše
-která
-nás
-nový
-tipy
-pokud
-může
-strana
-jeho
-své
-jiné
-zprávy
-nové
-není
-vás
-jen
-podle
-zde
-už
-být
-více
-bude
-již
-než
-který
-by
-které
-co
-nebo
-ten
-tak
-má
-při
-od
-po
-jsou
-jak
-další
-ale
-si
-se
-ve
-to
-jako
-za
-zpět
-ze
-do
-pro
-je
-na
-atd
-atp
-jakmile
-přičemž
-já
-on
-ona
-ono
-oni
-ony
-my
-vy
-jí
-ji
-mě
-mne
-jemu
-tomu
-těm
-těmu
-němu
-němuž
-jehož
-jíž
-jelikož
-jež
-jakož
-načež

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_da.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_da.txt
deleted file mode 100644 (file)
index a3ff5fe..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_da.txt
+++ /dev/null
@@ -1,108 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/danish/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Danish stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
- | This is a ranked list (commonest to rarest) of stopwords derived from
- | a large text sample.
-
-
-og           | and
-i            | in
-jeg          | I
-det          | that (dem. pronoun)/it (pers. pronoun)
-at           | that (in front of a sentence)/to (with infinitive)
-en           | a/an
-den          | it (pers. pronoun)/that (dem. pronoun)
-til          | to/at/for/until/against/by/of/into, more
-er           | present tense of "to be"
-som          | who, as
-på           | on/upon/in/on/at/to/after/of/with/for, on
-de           | they
-med          | with/by/in, along
-han          | he
-af           | of/by/from/off/for/in/with/on, off
-for          | at/for/to/from/by/of/ago, in front/before, because
-ikke         | not
-der          | who/which, there/those
-var          | past tense of "to be"
-mig          | me/myself
-sig          | oneself/himself/herself/itself/themselves
-men          | but
-et           | a/an/one, one (number), someone/somebody/one
-har          | present tense of "to have"
-om           | round/about/for/in/a, about/around/down, if
-vi           | we
-min          | my
-havde        | past tense of "to have"
-ham          | him
-hun          | she
-nu           | now
-over         | over/above/across/by/beyond/past/on/about, over/past
-da           | then, when/as/since
-fra          | from/off/since, off, since
-du           | you
-ud           | out
-sin          | his/her/its/one's
-dem          | them
-os           | us/ourselves
-op           | up
-man          | you/one
-hans         | his
-hvor         | where
-eller        | or
-hvad         | what
-skal         | must/shall etc.
-selv         | myself/youself/herself/ourselves etc., even
-her          | here
-alle         | all/everyone/everybody etc.
-vil          | will (verb)
-blev         | past tense of "to stay/to remain/to get/to become"
-kunne        | could
-ind          | in
-når          | when
-være         | present tense of "to be"
-dog          | however/yet/after all
-noget        | something
-ville        | would
-jo           | you know/you see (adv), yes
-deres        | their/theirs
-efter        | after/behind/according to/for/by/from, later/afterwards
-ned          | down
-skulle       | should
-denne        | this
-end          | than
-dette        | this
-mit          | my/mine
-også         | also
-under        | under/beneath/below/during, below/underneath
-have         | have
-dig          | you
-anden        | other
-hende        | her
-mine         | my
-alt          | everything
-meget        | much/very, plenty of
-sit          | his, her, its, one's
-sine         | his, her, its, one's
-vor          | our
-mod          | against
-disse        | these
-hvis         | if
-din          | your/yours
-nogle        | some
-hos          | by/at
-blive        | be/become
-mange        | many
-ad           | by/through
-bliver       | present tense of "to be/to become"
-hendes       | her/hers
-været        | be
-thi          | for (conj)
-jer          | you
-sådan        | such, like this/like that

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_de.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_de.txt
deleted file mode 100644 (file)
index f770384..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_de.txt
+++ /dev/null
@@ -1,292 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/german/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A German stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
- | The number of forms in this list is reduced significantly by passing it
- | through the German stemmer.
-
-
-aber           |  but
-
-alle           |  all
-allem
-allen
-aller
-alles
-
-als            |  than, as
-also           |  so
-am             |  an + dem
-an             |  at
-
-ander          |  other
-andere
-anderem
-anderen
-anderer
-anderes
-anderm
-andern
-anderr
-anders
-
-auch           |  also
-auf            |  on
-aus            |  out of
-bei            |  by
-bin            |  am
-bis            |  until
-bist           |  art
-da             |  there
-damit          |  with it
-dann           |  then
-
-der            |  the
-den
-des
-dem
-die
-das
-
-daß            |  that
-
-derselbe       |  the same
-derselben
-denselben
-desselben
-demselben
-dieselbe
-dieselben
-dasselbe
-
-dazu           |  to that
-
-dein           |  thy
-deine
-deinem
-deinen
-deiner
-deines
-
-denn           |  because
-
-derer          |  of those
-dessen         |  of him
-
-dich           |  thee
-dir            |  to thee
-du             |  thou
-
-dies           |  this
-diese
-diesem
-diesen
-dieser
-dieses
-
-
-doch           |  (several meanings)
-dort           |  (over) there
-
-
-durch          |  through
-
-ein            |  a
-eine
-einem
-einen
-einer
-eines
-
-einig          |  some
-einige
-einigem
-einigen
-einiger
-einiges
-
-einmal         |  once
-
-er             |  he
-ihn            |  him
-ihm            |  to him
-
-es             |  it
-etwas          |  something
-
-euer           |  your
-eure
-eurem
-euren
-eurer
-eures
-
-für            |  for
-gegen          |  towards
-gewesen        |  p.p. of sein
-hab            |  have
-habe           |  have
-haben          |  have
-hat            |  has
-hatte          |  had
-hatten         |  had
-hier           |  here
-hin            |  there
-hinter         |  behind
-
-ich            |  I
-mich           |  me
-mir            |  to me
-
-
-ihr            |  you, to her
-ihre
-ihrem
-ihren
-ihrer
-ihres
-euch           |  to you
-
-im             |  in + dem
-in             |  in
-indem          |  while
-ins            |  in + das
-ist            |  is
-
-jede           |  each, every
-jedem
-jeden
-jeder
-jedes
-
-jene           |  that
-jenem
-jenen
-jener
-jenes
-
-jetzt          |  now
-kann           |  can
-
-kein           |  no
-keine
-keinem
-keinen
-keiner
-keines
-
-können         |  can
-könnte         |  could
-machen         |  do
-man            |  one
-
-manche         |  some, many a
-manchem
-manchen
-mancher
-manches
-
-mein           |  my
-meine
-meinem
-meinen
-meiner
-meines
-
-mit            |  with
-muss           |  must
-musste         |  had to
-nach           |  to(wards)
-nicht          |  not
-nichts         |  nothing
-noch           |  still, yet
-nun            |  now
-nur            |  only
-ob             |  whether
-oder           |  or
-ohne           |  without
-sehr           |  very
-
-sein           |  his
-seine
-seinem
-seinen
-seiner
-seines
-
-selbst         |  self
-sich           |  herself
-
-sie            |  they, she
-ihnen          |  to them
-
-sind           |  are
-so             |  so
-
-solche         |  such
-solchem
-solchen
-solcher
-solches
-
-soll           |  shall
-sollte         |  should
-sondern        |  but
-sonst          |  else
-über           |  over
-um             |  about, around
-und            |  and
-
-uns            |  us
-unse
-unsem
-unsen
-unser
-unses
-
-unter          |  under
-viel           |  much
-vom            |  von + dem
-von            |  from
-vor            |  before
-während        |  while
-war            |  was
-waren          |  were
-warst          |  wast
-was            |  what
-weg            |  away, off
-weil           |  because
-weiter         |  further
-
-welche         |  which
-welchem
-welchen
-welcher
-welches
-
-wenn           |  when
-werde          |  will
-werden         |  will
-wie            |  how
-wieder         |  again
-will           |  want
-wir            |  we
-wird           |  will
-wirst          |  willst
-wo             |  where
-wollen         |  want
-wollte         |  wanted
-würde          |  would
-würden         |  would
-zu             |  to
-zum            |  zu + dem
-zur            |  zu + der
-zwar           |  indeed
-zwischen       |  between
-

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_el.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_el.txt
deleted file mode 100644 (file)
index 232681f..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_el.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-# Lucene Greek Stopwords list
-# Note: by default this file is used after GreekLowerCaseFilter,
-# so when modifying this file use 'σ' instead of 'ς' 
-ο
-η
-το
-οι
-τα
-του
-τησ
-των
-τον
-την
-και 
-κι
-κ
-ειμαι
-εισαι
-ειναι
-ειμαστε
-ειστε
-στο
-στον
-στη
-στην
-μα
-αλλα
-απο
-για
-προσ
-με
-σε
-ωσ
-παρα
-αντι
-κατα
-μετα
-θα
-να
-δε
-δεν
-μη
-μην
-επι
-ενω
-εαν
-αν
-τοτε
-που
-πωσ
-ποιοσ
-ποια
-ποιο
-ποιοι
-ποιεσ
-ποιων
-ποιουσ
-αυτοσ
-αυτη
-αυτο
-αυτοι
-αυτων
-αυτουσ
-αυτεσ
-αυτα
-εκεινοσ
-εκεινη
-εκεινο
-εκεινοι
-εκεινεσ
-εκεινα
-εκεινων
-εκεινουσ
-οπωσ
-ομωσ
-ισωσ
-οσο
-οτι

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_en.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_en.txt
deleted file mode 100644 (file)
index 2c164c0..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_en.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# a couple of test stopwords to test that the words are really being
-# configured from this file:
-stopworda
-stopwordb
-
-# Standard english stop words taken from Lucene's StopAnalyzer
-a
-an
-and
-are
-as
-at
-be
-but
-by
-for
-if
-in
-into
-is
-it
-no
-not
-of
-on
-or
-such
-that
-the
-their
-then
-there
-these
-they
-this
-to
-was
-will
-with

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_es.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_es.txt
deleted file mode 100644 (file)
index 2db1476..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_es.txt
+++ /dev/null
@@ -1,354 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/spanish/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Spanish stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
-
- | The following is a ranked list (commonest to rarest) of stopwords
- | deriving from a large sample of text.
-
- | Extra words have been added at the end.
-
-de             |  from, of
-la             |  the, her
-que            |  who, that
-el             |  the
-en             |  in
-y              |  and
-a              |  to
-los            |  the, them
-del            |  de + el
-se             |  himself, from him etc
-las            |  the, them
-por            |  for, by, etc
-un             |  a
-para           |  for
-con            |  with
-no             |  no
-una            |  a
-su             |  his, her
-al             |  a + el
-  | es         from SER
-lo             |  him
-como           |  how
-más            |  more
-pero           |  pero
-sus            |  su plural
-le             |  to him, her
-ya             |  already
-o              |  or
-  | fue        from SER
-este           |  this
-  | ha         from HABER
-sí             |  himself etc
-porque         |  because
-esta           |  this
-  | son        from SER
-entre          |  between
-  | está     from ESTAR
-cuando         |  when
-muy            |  very
-sin            |  without
-sobre          |  on
-  | ser        from SER
-  | tiene      from TENER
-también        |  also
-me             |  me
-hasta          |  until
-hay            |  there is/are
-donde          |  where
-  | han        from HABER
-quien          |  whom, that
-  | están      from ESTAR
-  | estado     from ESTAR
-desde          |  from
-todo           |  all
-nos            |  us
-durante        |  during
-  | estados    from ESTAR
-todos          |  all
-uno            |  a
-les            |  to them
-ni             |  nor
-contra         |  against
-otros          |  other
-  | fueron     from SER
-ese            |  that
-eso            |  that
-  | había      from HABER
-ante           |  before
-ellos          |  they
-e              |  and (variant of y)
-esto           |  this
-mí             |  me
-antes          |  before
-algunos        |  some
-qué            |  what?
-unos           |  a
-yo             |  I
-otro           |  other
-otras          |  other
-otra           |  other
-él             |  he
-tanto          |  so much, many
-esa            |  that
-estos          |  these
-mucho          |  much, many
-quienes        |  who
-nada           |  nothing
-muchos         |  many
-cual           |  who
-  | sea        from SER
-poco           |  few
-ella           |  she
-estar          |  to be
-  | haber      from HABER
-estas          |  these
-  | estaba     from ESTAR
-  | estamos    from ESTAR
-algunas        |  some
-algo           |  something
-nosotros       |  we
-
-      | other forms
-
-mi             |  me
-mis            |  mi plural
-tú             |  thou
-te             |  thee
-ti             |  thee
-tu             |  thy
-tus            |  tu plural
-ellas          |  they
-nosotras       |  we
-vosotros       |  you
-vosotras       |  you
-os             |  you
-mío            |  mine
-mía            |
-míos           |
-mías           |
-tuyo           |  thine
-tuya           |
-tuyos          |
-tuyas          |
-suyo           |  his, hers, theirs
-suya           |
-suyos          |
-suyas          |
-nuestro        |  ours
-nuestra        |
-nuestros       |
-nuestras       |
-vuestro        |  yours
-vuestra        |
-vuestros       |
-vuestras       |
-esos           |  those
-esas           |  those
-
-               | forms of estar, to be (not including the infinitive):
-estoy
-estás
-está
-estamos
-estáis
-están
-esté
-estés
-estemos
-estéis
-estén
-estaré
-estarás
-estará
-estaremos
-estaréis
-estarán
-estaría
-estarías
-estaríamos
-estaríais
-estarían
-estaba
-estabas
-estábamos
-estabais
-estaban
-estuve
-estuviste
-estuvo
-estuvimos
-estuvisteis
-estuvieron
-estuviera
-estuvieras
-estuviéramos
-estuvierais
-estuvieran
-estuviese
-estuvieses
-estuviésemos
-estuvieseis
-estuviesen
-estando
-estado
-estada
-estados
-estadas
-estad
-
-               | forms of haber, to have (not including the infinitive):
-he
-has
-ha
-hemos
-habéis
-han
-haya
-hayas
-hayamos
-hayáis
-hayan
-habré
-habrás
-habrá
-habremos
-habréis
-habrán
-habría
-habrías
-habríamos
-habríais
-habrían
-había
-habías
-habíamos
-habíais
-habían
-hube
-hubiste
-hubo
-hubimos
-hubisteis
-hubieron
-hubiera
-hubieras
-hubiéramos
-hubierais
-hubieran
-hubiese
-hubieses
-hubiésemos
-hubieseis
-hubiesen
-habiendo
-habido
-habida
-habidos
-habidas
-
-               | forms of ser, to be (not including the infinitive):
-soy
-eres
-es
-somos
-sois
-son
-sea
-seas
-seamos
-seáis
-sean
-seré
-serás
-será
-seremos
-seréis
-serán
-sería
-serías
-seríamos
-seríais
-serían
-era
-eras
-éramos
-erais
-eran
-fui
-fuiste
-fue
-fuimos
-fuisteis
-fueron
-fuera
-fueras
-fuéramos
-fuerais
-fueran
-fuese
-fueses
-fuésemos
-fueseis
-fuesen
-siendo
-sido
-  |  sed also means 'thirst'
-
-               | forms of tener, to have (not including the infinitive):
-tengo
-tienes
-tiene
-tenemos
-tenéis
-tienen
-tenga
-tengas
-tengamos
-tengáis
-tengan
-tendré
-tendrás
-tendrá
-tendremos
-tendréis
-tendrán
-tendría
-tendrías
-tendríamos
-tendríais
-tendrían
-tenía
-tenías
-teníamos
-teníais
-tenían
-tuve
-tuviste
-tuvo
-tuvimos
-tuvisteis
-tuvieron
-tuviera
-tuvieras
-tuviéramos
-tuvierais
-tuvieran
-tuviese
-tuvieses
-tuviésemos
-tuvieseis
-tuviesen
-teniendo
-tenido
-tenida
-tenidos
-tenidas
-tened
-

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_eu.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_eu.txt
deleted file mode 100644 (file)
index 25f1db9..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_eu.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-# example set of basque stopwords
-al
-anitz
-arabera
-asko
-baina
-bat
-batean
-batek
-bati
-batzuei
-batzuek
-batzuetan
-batzuk
-bera
-beraiek
-berau
-berauek
-bere
-berori
-beroriek
-beste
-bezala
-da
-dago
-dira
-ditu
-du
-dute
-edo
-egin
-ere
-eta
-eurak
-ez
-gainera
-gu
-gutxi
-guzti
-haiei
-haiek
-haietan
-hainbeste
-hala
-han
-handik
-hango
-hara
-hari
-hark
-hartan
-hau
-hauei
-hauek
-hauetan
-hemen
-hemendik
-hemengo
-hi
-hona
-honek
-honela
-honetan
-honi
-hor
-hori
-horiei
-horiek
-horietan
-horko
-horra
-horrek
-horrela
-horretan
-horri
-hortik
-hura
-izan
-ni
-noiz
-nola
-non
-nondik
-nongo
-nor
-nora
-ze
-zein
-zen
-zenbait
-zenbat
-zer
-zergatik
-ziren
-zituen
-zu
-zuek
-zuen
-zuten

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_fa.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_fa.txt
deleted file mode 100644 (file)
index 723641c..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_fa.txt
+++ /dev/null
@@ -1,313 +0,0 @@
-# This file was created by Jacques Savoy and is distributed under the BSD license.
-# See http://members.unine.ch/jacques.savoy/clef/index.html.
-# Also see http://www.opensource.org/licenses/bsd-license.html
-# Note: by default this file is used after normalization, so when adding entries
-# to this file, use the arabic 'ي' instead of 'ی'
-انان
-نداشته
-سراسر
-خياه
-ايشان
-وي
-تاكنون
-بيشتري
-دوم
-پس
-ناشي
-وگو
-يا
-داشتند
-سپس
-هنگام
-هرگز
-پنج
-نشان
-امسال
-ديگر
-گروهي
-شدند
-چطور
-ده
-و
-دو
-نخستين
-ولي
-چرا
-چه
-وسط
-ه
-كدام
-قابل
-يك
-رفت
-هفت
-همچنين
-در
-هزار
-بله
-بلي
-شايد
-اما
-شناسي
-گرفته
-دهد
-داشته
-دانست
-داشتن
-خواهيم
-ميليارد
-وقتيكه
-امد
-خواهد
-جز
-اورده
-شده
-بلكه
-خدمات
-شدن
-برخي
-نبود
-بسياري
-جلوگيري
-حق
-كردند
-نوعي
-بعري
-نكرده
-نظير
-نبايد
-بوده
-بودن
-داد
-اورد
-هست
-جايي
-شود
-دنبال
-داده
-بايد
-سابق
-هيچ
-همان
-انجا
-كمتر
-كجاست
-گردد
-كسي
-تر
-مردم
-تان
-دادن
-بودند
-سري
-جدا
-ندارند
-مگر
-يكديگر
-دارد
-دهند
-بنابراين
-هنگامي
-سمت
-جا
-انچه
-خود
-دادند
-زياد
-دارند
-اثر
-بدون
-بهترين
-بيشتر
-البته
-به
-براساس
-بيرون
-كرد
-بعضي
-گرفت
-توي
-اي
-ميليون
-او
-جريان
-تول
-بر
-مانند
-برابر
-باشيم
-مدتي
-گويند
-اكنون
-تا
-تنها
-جديد
-چند
-بي
-نشده
-كردن
-كردم
-گويد
-كرده
-كنيم
-نمي
-نزد
-روي
-قصد
-فقط
-بالاي
-ديگران
-اين
-ديروز
-توسط
-سوم
-ايم
-دانند
-سوي
-استفاده
-شما
-كنار
-داريم
-ساخته
-طور
-امده
-رفته
-نخست
-بيست
-نزديك
-طي
-كنيد
-از
-انها
-تمامي
-داشت
-يكي
-طريق
-اش
-چيست
-روب
-نمايد
-گفت
-چندين
-چيزي
-تواند
-ام
-ايا
-با
-ان
-ايد
-ترين
-اينكه
-ديگري
-راه
-هايي
-بروز
-همچنان
-پاعين
-كس
-حدود
-مختلف
-مقابل
-چيز
-گيرد
-ندارد
-ضد
-همچون
-سازي
-شان
-مورد
-باره
-مرسي
-خويش
-برخوردار
-چون
-خارج
-شش
-هنوز
-تحت
-ضمن
-هستيم
-گفته
-فكر
-بسيار
-پيش
-براي
-روزهاي
-انكه
-نخواهد
-بالا
-كل
-وقتي
-كي
-چنين
-كه
-گيري
-نيست
-است
-كجا
-كند
-نيز
-يابد
-بندي
-حتي
-توانند
-عقب
-خواست
-كنند
-بين
-تمام
-همه
-ما
-باشند
-مثل
-شد
-اري
-باشد
-اره
-طبق
-بعد
-اگر
-صورت
-غير
-جاي
-بيش
-ريزي
-اند
-زيرا
-چگونه
-بار
-لطفا
-مي
-درباره
-من
-ديده
-همين
-گذاري
-برداري
-علت
-گذاشته
-هم
-فوق
-نه
-ها
-شوند
-اباد
-همواره
-هر
-اول
-خواهند
-چهار
-نام
-امروز
-مان
-هاي
-قبل
-كنم
-سعي
-تازه
-را
-هستند
-زير
-جلوي
-عنوان
-بود

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_fi.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_fi.txt
deleted file mode 100644 (file)
index addad79..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_fi.txt
+++ /dev/null
@@ -1,95 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/finnish/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
- 
-| forms of BE
-
-olla
-olen
-olet
-on
-olemme
-olette
-ovat
-ole        | negative form
-
-oli
-olisi
-olisit
-olisin
-olisimme
-olisitte
-olisivat
-olit
-olin
-olimme
-olitte
-olivat
-ollut
-olleet
-
-en         | negation
-et
-ei
-emme
-ette
-eivät
-
-|Nom   Gen    Acc    Part   Iness   Elat    Illat  Adess   Ablat   Allat   Ess    Trans
-minä   minun  minut  minua  minussa minusta minuun minulla minulta minulle               | I
-sinä   sinun  sinut  sinua  sinussa sinusta sinuun sinulla sinulta sinulle               | you
-hän    hänen  hänet  häntä  hänessä hänestä häneen hänellä häneltä hänelle               | he she
-me     meidän meidät meitä  meissä  meistä  meihin meillä  meiltä  meille                | we
-te     teidän teidät teitä  teissä  teistä  teihin teillä  teiltä  teille                | you
-he     heidän heidät heitä  heissä  heistä  heihin heillä  heiltä  heille                | they
-
-tämä   tämän         tätä   tässä   tästä   tähän  tallä   tältä   tälle   tänä   täksi  | this
-tuo    tuon          tuotä  tuossa  tuosta  tuohon tuolla  tuolta  tuolle  tuona  tuoksi | that
-se     sen           sitä   siinä   siitä   siihen sillä   siltä   sille   sinä   siksi  | it
-nämä   näiden        näitä  näissä  näistä  näihin näillä  näiltä  näille  näinä  näiksi | these
-nuo    noiden        noita  noissa  noista  noihin noilla  noilta  noille  noina  noiksi | those
-ne     niiden        niitä  niissä  niistä  niihin niillä  niiltä  niille  niinä  niiksi | they
-
-kuka   kenen kenet   ketä   kenessä kenestä keneen kenellä keneltä kenelle kenenä keneksi| who
-ketkä  keiden ketkä  keitä  keissä  keistä  keihin keillä  keiltä  keille  keinä  keiksi | (pl)
-mikä   minkä minkä   mitä   missä   mistä   mihin  millä   miltä   mille   minä   miksi  | which what
-mitkä                                                                                    | (pl)
-
-joka   jonka         jota   jossa   josta   johon  jolla   jolta   jolle   jona   joksi  | who which
-jotka  joiden        joita  joissa  joista  joihin joilla  joilta  joille  joina  joiksi | (pl)
-
-| conjunctions
-
-että   | that
-ja     | and
-jos    | if
-koska  | because
-kuin   | than
-mutta  | but
-niin   | so
-sekä   | and
-sillä  | for
-tai    | or
-vaan   | but
-vai    | or
-vaikka | although
-
-
-| prepositions
-
-kanssa  | with
-mukaan  | according to
-noin    | about
-poikki  | across
-yli     | over, across
-
-| other
-
-kun    | when
-niin   | so
-nyt    | now
-itse   | self
-

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_fr.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_fr.txt
deleted file mode 100644 (file)
index 20d12cb..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_fr.txt
+++ /dev/null
@@ -1,184 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/french/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A French stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
-au             |  a + le
-aux            |  a + les
-avec           |  with
-ce             |  this
-ces            |  these
-dans           |  with
-de             |  of
-des            |  de + les
-du             |  de + le
-elle           |  she
-en             |  `of them' etc
-et             |  and
-eux            |  them
-il             |  he
-je             |  I
-la             |  the
-le             |  the
-leur           |  their
-lui            |  him
-ma             |  my (fem)
-mais           |  but
-me             |  me
-même           |  same; as in moi-même (myself) etc
-mes            |  me (pl)
-moi            |  me
-mon            |  my (masc)
-ne             |  not
-nos            |  our (pl)
-notre          |  our
-nous           |  we
-on             |  one
-ou             |  where
-par            |  by
-pas            |  not
-pour           |  for
-qu             |  que before vowel
-que            |  that
-qui            |  who
-sa             |  his, her (fem)
-se             |  oneself
-ses            |  his (pl)
-son            |  his, her (masc)
-sur            |  on
-ta             |  thy (fem)
-te             |  thee
-tes            |  thy (pl)
-toi            |  thee
-ton            |  thy (masc)
-tu             |  thou
-un             |  a
-une            |  a
-vos            |  your (pl)
-votre          |  your
-vous           |  you
-
-               |  single letter forms
-
-c              |  c'
-d              |  d'
-j              |  j'
-l              |  l'
-à              |  to, at
-m              |  m'
-n              |  n'
-s              |  s'
-t              |  t'
-y              |  there
-
-               | forms of être (not including the infinitive):
-été
-étée
-étées
-étés
-étant
-suis
-es
-est
-sommes
-êtes
-sont
-serai
-seras
-sera
-serons
-serez
-seront
-serais
-serait
-serions
-seriez
-seraient
-étais
-était
-étions
-étiez
-étaient
-fus
-fut
-fûmes
-fûtes
-furent
-sois
-soit
-soyons
-soyez
-soient
-fusse
-fusses
-fût
-fussions
-fussiez
-fussent
-
-               | forms of avoir (not including the infinitive):
-ayant
-eu
-eue
-eues
-eus
-ai
-as
-avons
-avez
-ont
-aurai
-auras
-aura
-aurons
-aurez
-auront
-aurais
-aurait
-aurions
-auriez
-auraient
-avais
-avait
-avions
-aviez
-avaient
-eut
-eûmes
-eûtes
-eurent
-aie
-aies
-ait
-ayons
-ayez
-aient
-eusse
-eusses
-eût
-eussions
-eussiez
-eussent
-
-               | Later additions (from Jean-Christophe Deschamps)
-ceci           |  this
-cela           |  that
-celà           |  that
-cet            |  this
-cette          |  this
-ici            |  here
-ils            |  they
-les            |  the (pl)
-leurs          |  their (pl)
-quel           |  which
-quels          |  which
-quelle         |  which
-quelles        |  which
-sans           |  without
-soi            |  oneself
-

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ga.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ga.txt
deleted file mode 100644 (file)
index 9ff88d7..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ga.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-
-a
-ach
-ag
-agus
-an
-aon
-ar
-arna
-as
-b'
-ba
-beirt
-bhúr
-caoga
-ceathair
-ceathrar
-chomh
-chtó
-chuig
-chun
-cois
-céad
-cúig
-cúigear
-d'
-daichead
-dar
-de
-deich
-deichniúr
-den
-dhá
-do
-don
-dtí
-dá
-dár
-dó
-faoi
-faoin
-faoina
-faoinár
-fara
-fiche
-gach
-gan
-go
-gur
-haon
-hocht
-i
-iad
-idir
-in
-ina
-ins
-inár
-is
-le
-leis
-lena
-lenár
-m'
-mar
-mo
-mé
-na
-nach
-naoi
-naonúr
-ná
-ní
-níor
-nó
-nócha
-ocht
-ochtar
-os
-roimh
-sa
-seacht
-seachtar
-seachtó
-seasca
-seisear
-siad
-sibh
-sinn
-sna
-sé
-sí
-tar
-thar
-thú
-triúr
-trí
-trína
-trínár
-tríocha
-tú
-um
-ár
-é
-éis
-í
-ó
-ón
-óna
-ónár

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_gl.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_gl.txt
deleted file mode 100644 (file)
index d8760b1..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_gl.txt
+++ /dev/null
@@ -1,161 +0,0 @@
-# galican stopwords
-a
-aínda
-alí
-aquel
-aquela
-aquelas
-aqueles
-aquilo
-aquí
-ao
-aos
-as
-así
-á
-ben
-cando
-che
-co
-coa
-comigo
-con
-connosco
-contigo
-convosco
-coas
-cos
-cun
-cuns
-cunha
-cunhas
-da
-dalgunha
-dalgunhas
-dalgún
-dalgúns
-das
-de
-del
-dela
-delas
-deles
-desde
-deste
-do
-dos
-dun
-duns
-dunha
-dunhas
-e
-el
-ela
-elas
-eles
-en
-era
-eran
-esa
-esas
-ese
-eses
-esta
-estar
-estaba
-está
-están
-este
-estes
-estiven
-estou
-eu
-é
-facer
-foi
-foron
-fun
-había
-hai
-iso
-isto
-la
-las
-lle
-lles
-lo
-los
-mais
-me
-meu
-meus
-min
-miña
-miñas
-moi
-na
-nas
-neste
-nin
-no
-non
-nos
-nosa
-nosas
-noso
-nosos
-nós
-nun
-nunha
-nuns
-nunhas
-o
-os
-ou
-ó
-ós
-para
-pero
-pode
-pois
-pola
-polas
-polo
-polos
-por
-que
-se
-senón
-ser
-seu
-seus
-sexa
-sido
-sobre
-súa
-súas
-tamén
-tan
-te
-ten
-teñen
-teño
-ter
-teu
-teus
-ti
-tido
-tiña
-tiven
-túa
-túas
-un
-unha
-unhas
-uns
-vos
-vosa
-vosas
-voso
-vosos
-vós

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_hi.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_hi.txt
deleted file mode 100644 (file)
index 86286bb..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_hi.txt
+++ /dev/null
@@ -1,235 +0,0 @@
-# Also see http://www.opensource.org/licenses/bsd-license.html
-# See http://members.unine.ch/jacques.savoy/clef/index.html.
-# This file was created by Jacques Savoy and is distributed under the BSD license.
-# Note: by default this file also contains forms normalized by HindiNormalizer 
-# for spelling variation (see section below), such that it can be used whether or 
-# not you enable that feature. When adding additional entries to this list,
-# please add the normalized form as well. 
-अंदर
-अत
-अपना
-अपनी
-अपने
-अभी
-आदि
-आप
-इत्यादि
-इन 
-इनका
-इन्हीं
-इन्हें
-इन्हों
-इस
-इसका
-इसकी
-इसके
-इसमें
-इसी
-इसे
-उन
-उनका
-उनकी
-उनके
-उनको
-उन्हीं
-उन्हें
-उन्हों
-उस
-उसके
-उसी
-उसे
-एक
-एवं
-एस
-ऐसे
-और
-कई
-कर
-करता
-करते
-करना
-करने
-करें
-कहते
-कहा
-का
-काफ़ी
-कि
-कितना
-किन्हें
-किन्हों
-किया
-किर
-किस
-किसी
-किसे
-की
-कुछ
-कुल
-के
-को
-कोई
-कौन
-कौनसा
-गया
-घर
-जब
-जहाँ
-जा
-जितना
-जिन
-जिन्हें
-जिन्हों
-जिस
-जिसे
-जीधर
-जैसा
-जैसे
-जो
-तक
-तब
-तरह
-तिन
-तिन्हें
-तिन्हों
-तिस
-तिसे
-तो
-था
-थी
-थे
-दबारा
-दिया
-दुसरा
-दूसरे
-दो
-द्वारा
-न
-नहीं
-ना
-निहायत
-नीचे
-ने
-पर
-पर  
-पहले
-पूरा
-पे
-फिर
-बनी
-बही
-बहुत
-बाद
-बाला
-बिलकुल
-भी
-भीतर
-मगर
-मानो
-मे
-में
-यदि
-यह
-यहाँ
-यही
-या
-यिह 
-ये
-रखें
-रहा
-रहे
-ऱ्वासा
-लिए
-लिये
-लेकिन
-व
-वर्ग
-वह
-वह 
-वहाँ
-वहीं
-वाले
-वुह 
-वे
-वग़ैरह
-संग
-सकता
-सकते
-सबसे
-सभी
-साथ
-साबुत
-साभ
-सारा
-से
-सो
-ही
-हुआ
-हुई
-हुए
-है
-हैं
-हो
-होता
-होती
-होते
-होना
-होने
-# additional normalized forms of the above
-अपनि
-जेसे
-होति
-सभि
-तिंहों
-इंहों
-दवारा
-इसि
-किंहें
-थि
-उंहों
-ओर
-जिंहें
-वहिं
-अभि
-बनि
-हि
-उंहिं
-उंहें
-हें
-वगेरह
-एसे
-रवासा
-कोन
-निचे
-काफि
-उसि
-पुरा
-भितर
-हे
-बहि
-वहां
-कोइ
-यहां
-जिंहों
-तिंहें
-किसि
-कइ
-यहि
-इंहिं
-जिधर
-इंहें
-अदि
-इतयादि
-हुइ
-कोनसा
-इसकि
-दुसरे
-जहां
-अप
-किंहों
-उनकि
-भि
-वरग
-हुअ
-जेसा
-नहिं

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_hu.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_hu.txt
deleted file mode 100644 (file)
index 1a96f1d..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_hu.txt
+++ /dev/null
@@ -1,209 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/hungarian/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
- 
-| Hungarian stop word list
-| prepared by Anna Tordai
-
-a
-ahogy
-ahol
-aki
-akik
-akkor
-alatt
-által
-általában
-amely
-amelyek
-amelyekben
-amelyeket
-amelyet
-amelynek
-ami
-amit
-amolyan
-amíg
-amikor
-át
-abban
-ahhoz
-annak
-arra
-arról
-az
-azok
-azon
-azt
-azzal
-azért
-aztán
-azután
-azonban
-bár
-be
-belül
-benne
-cikk
-cikkek
-cikkeket
-csak
-de
-e
-eddig
-egész
-egy
-egyes
-egyetlen
-egyéb
-egyik
-egyre
-ekkor
-el
-elég
-ellen
-elő
-először
-előtt
-első
-én
-éppen
-ebben
-ehhez
-emilyen
-ennek
-erre
-ez
-ezt
-ezek
-ezen
-ezzel
-ezért
-és
-fel
-felé
-hanem
-hiszen
-hogy
-hogyan
-igen
-így
-illetve
-ill.
-ill
-ilyen
-ilyenkor
-ison
-ismét
-itt
-jó
-jól
-jobban
-kell
-kellett
-keresztül
-keressünk
-ki
-kívül
-között
-közül
-legalább
-lehet
-lehetett
-legyen
-lenne
-lenni
-lesz
-lett
-maga
-magát
-majd
-majd
-már
-más
-másik
-meg
-még
-mellett
-mert
-mely
-melyek
-mi
-mit
-míg
-miért
-milyen
-mikor
-minden
-mindent
-mindenki
-mindig
-mint
-mintha
-mivel
-most
-nagy
-nagyobb
-nagyon
-ne
-néha
-nekem
-neki
-nem
-néhány
-nélkül
-nincs
-olyan
-ott
-össze
-ő
-ők
-őket
-pedig
-persze
-rá
-s
-saját
-sem
-semmi
-sok
-sokat
-sokkal
-számára
-szemben
-szerint
-szinte
-talán
-tehát
-teljes
-tovább
-továbbá
-több
-úgy
-ugyanis
-új
-újabb
-újra
-után
-utána
-utolsó
-vagy
-vagyis
-valaki
-valami
-valamint
-való
-vagyok
-van
-vannak
-volt
-voltam
-voltak
-voltunk
-vissza
-vele
-viszont
-volna

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_hy.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_hy.txt
deleted file mode 100644 (file)
index 60c1c50..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_hy.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-# example set of Armenian stopwords.
-այդ
-այլ
-այն
-այս
-դու
-դուք
-եմ
-են
-ենք
-ես
-եք
-է
-էի
-էին
-էինք
-էիր
-էիք
-էր
-ըստ
-թ
-ի
-ին
-իսկ
-իր
-կամ
-համար
-հետ
-հետո
-մենք
-մեջ
-մի
-ն
-նա
-նաև
-նրա
-նրանք
-որ
-որը
-որոնք
-որպես
-ու
-ում
-պիտի
-վրա
-և

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_id.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_id.txt
deleted file mode 100644 (file)
index 4617f83..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_id.txt
+++ /dev/null
@@ -1,359 +0,0 @@
-# from appendix D of: A Study of Stemming Effects on Information
-# Retrieval in Bahasa Indonesia
-ada
-adanya
-adalah
-adapun
-agak
-agaknya
-agar
-akan
-akankah
-akhirnya
-aku
-akulah
-amat
-amatlah
-anda
-andalah
-antar
-diantaranya
-antara
-antaranya
-diantara
-apa
-apaan
-mengapa
-apabila
-apakah
-apalagi
-apatah
-atau
-ataukah
-ataupun
-bagai
-bagaikan
-sebagai
-sebagainya
-bagaimana
-bagaimanapun
-sebagaimana
-bagaimanakah
-bagi
-bahkan
-bahwa
-bahwasanya
-sebaliknya
-banyak
-sebanyak
-beberapa
-seberapa
-begini
-beginian
-beginikah
-beginilah
-sebegini
-begitu
-begitukah
-begitulah
-begitupun
-sebegitu
-belum
-belumlah
-sebelum
-sebelumnya
-sebenarnya
-berapa
-berapakah
-berapalah
-berapapun
-betulkah
-sebetulnya
-biasa
-biasanya
-bila
-bilakah
-bisa
-bisakah
-sebisanya
-boleh
-bolehkah
-bolehlah
-buat
-bukan
-bukankah
-bukanlah
-bukannya
-cuma
-percuma
-dahulu
-dalam
-dan
-dapat
-dari
-daripada
-dekat
-demi
-demikian
-demikianlah
-sedemikian
-dengan
-depan
-di
-dia
-dialah
-dini
-diri
-dirinya
-terdiri
-dong
-dulu
-enggak
-enggaknya
-entah
-entahlah
-terhadap
-terhadapnya
-hal
-hampir
-hanya
-hanyalah
-harus
-haruslah
-harusnya
-seharusnya
-hendak
-hendaklah
-hendaknya
-hingga
-sehingga
-ia
-ialah
-ibarat
-ingin
-inginkah
-inginkan
-ini
-inikah
-inilah
-itu
-itukah
-itulah
-jangan
-jangankan
-janganlah
-jika
-jikalau
-juga
-justru
-kala
-kalau
-kalaulah
-kalaupun
-kalian
-kami
-kamilah
-kamu
-kamulah
-kan
-kapan
-kapankah
-kapanpun
-dikarenakan
-karena
-karenanya
-ke
-kecil
-kemudian
-kenapa
-kepada
-kepadanya
-ketika
-seketika
-khususnya
-kini
-kinilah
-kiranya
-sekiranya
-kita
-kitalah
-kok
-lagi
-lagian
-selagi
-lah
-lain
-lainnya
-melainkan
-selaku
-lalu
-melalui
-terlalu
-lama
-lamanya
-selama
-selama
-selamanya
-lebih
-terlebih
-bermacam
-macam
-semacam
-maka
-makanya
-makin
-malah
-malahan
-mampu
-mampukah
-mana
-manakala
-manalagi
-masih
-masihkah
-semasih
-masing
-mau
-maupun
-semaunya
-memang
-mereka
-merekalah
-meski
-meskipun
-semula
-mungkin
-mungkinkah
-nah
-namun
-nanti
-nantinya
-nyaris
-oleh
-olehnya
-seorang
-seseorang
-pada
-padanya
-padahal
-paling
-sepanjang
-pantas
-sepantasnya
-sepantasnyalah
-para
-pasti
-pastilah
-per
-pernah
-pula
-pun
-merupakan
-rupanya
-serupa
-saat
-saatnya
-sesaat
-saja
-sajalah
-saling
-bersama
-sama
-sesama
-sambil
-sampai
-sana
-sangat
-sangatlah
-saya
-sayalah
-se
-sebab
-sebabnya
-sebuah
-tersebut
-tersebutlah
-sedang
-sedangkan
-sedikit
-sedikitnya
-segala
-segalanya
-segera
-sesegera
-sejak
-sejenak
-sekali
-sekalian
-sekalipun
-sesekali
-sekaligus
-sekarang
-sekarang
-sekitar
-sekitarnya
-sela
-selain
-selalu
-seluruh
-seluruhnya
-semakin
-sementara
-sempat
-semua
-semuanya
-sendiri
-sendirinya
-seolah
-seperti
-sepertinya
-sering
-seringnya
-serta
-siapa
-siapakah
-siapapun
-disini
-disinilah
-sini
-sinilah
-sesuatu
-sesuatunya
-suatu
-sesudah
-sesudahnya
-sudah
-sudahkah
-sudahlah
-supaya
-tadi
-tadinya
-tak
-tanpa
-setelah
-telah
-tentang
-tentu
-tentulah
-tentunya
-tertentu
-seterusnya
-tapi
-tetapi
-setiap
-tiap
-setidaknya
-tidak
-tidakkah
-tidaklah
-toh
-waduh
-wah
-wahai
-sewaktu
-walau
-walaupun
-wong
-yaitu
-yakni
-yang

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_it.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_it.txt
deleted file mode 100644 (file)
index 4cb5b08..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_it.txt
+++ /dev/null
@@ -1,301 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/italian/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | An Italian stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
-ad             |  a (to) before vowel
-al             |  a + il
-allo           |  a + lo
-ai             |  a + i
-agli           |  a + gli
-all            |  a + l'
-agl            |  a + gl'
-alla           |  a + la
-alle           |  a + le
-con            |  with
-col            |  con + il
-coi            |  con + i (forms collo, cogli etc are now very rare)
-da             |  from
-dal            |  da + il
-dallo          |  da + lo
-dai            |  da + i
-dagli          |  da + gli
-dall           |  da + l'
-dagl           |  da + gll'
-dalla          |  da + la
-dalle          |  da + le
-di             |  of
-del            |  di + il
-dello          |  di + lo
-dei            |  di + i
-degli          |  di + gli
-dell           |  di + l'
-degl           |  di + gl'
-della          |  di + la
-delle          |  di + le
-in             |  in
-nel            |  in + el
-nello          |  in + lo
-nei            |  in + i
-negli          |  in + gli
-nell           |  in + l'
-negl           |  in + gl'
-nella          |  in + la
-nelle          |  in + le
-su             |  on
-sul            |  su + il
-sullo          |  su + lo
-sui            |  su + i
-sugli          |  su + gli
-sull           |  su + l'
-sugl           |  su + gl'
-sulla          |  su + la
-sulle          |  su + le
-per            |  through, by
-tra            |  among
-contro         |  against
-io             |  I
-tu             |  thou
-lui            |  he
-lei            |  she
-noi            |  we
-voi            |  you
-loro           |  they
-mio            |  my
-mia            |
-miei           |
-mie            |
-tuo            |
-tua            |
-tuoi           |  thy
-tue            |
-suo            |
-sua            |
-suoi           |  his, her
-sue            |
-nostro         |  our
-nostra         |
-nostri         |
-nostre         |
-vostro         |  your
-vostra         |
-vostri         |
-vostre         |
-mi             |  me
-ti             |  thee
-ci             |  us, there
-vi             |  you, there
-lo             |  him, the
-la             |  her, the
-li             |  them
-le             |  them, the
-gli            |  to him, the
-ne             |  from there etc
-il             |  the
-un             |  a
-uno            |  a
-una            |  a
-ma             |  but
-ed             |  and
-se             |  if
-perché         |  why, because
-anche          |  also
-come           |  how
-dov            |  where (as dov')
-dove           |  where
-che            |  who, that
-chi            |  who
-cui            |  whom
-non            |  not
-più            |  more
-quale          |  who, that
-quanto         |  how much
-quanti         |
-quanta         |
-quante         |
-quello         |  that
-quelli         |
-quella         |
-quelle         |
-questo         |  this
-questi         |
-questa         |
-queste         |
-si             |  yes
-tutto          |  all
-tutti          |  all
-
-               |  single letter forms:
-
-a              |  at
-c              |  as c' for ce or ci
-e              |  and
-i              |  the
-l              |  as l'
-o              |  or
-
-               | forms of avere, to have (not including the infinitive):
-
-ho
-hai
-ha
-abbiamo
-avete
-hanno
-abbia
-abbiate
-abbiano
-avrò
-avrai
-avrà
-avremo
-avrete
-avranno
-avrei
-avresti
-avrebbe
-avremmo
-avreste
-avrebbero
-avevo
-avevi
-aveva
-avevamo
-avevate
-avevano
-ebbi
-avesti
-ebbe
-avemmo
-aveste
-ebbero
-avessi
-avesse
-avessimo
-avessero
-avendo
-avuto
-avuta
-avuti
-avute
-
-               | forms of essere, to be (not including the infinitive):
-sono
-sei
-è
-siamo
-siete
-sia
-siate
-siano
-sarò
-sarai
-sarà
-saremo
-sarete
-saranno
-sarei
-saresti
-sarebbe
-saremmo
-sareste
-sarebbero
-ero
-eri
-era
-eravamo
-eravate
-erano
-fui
-fosti
-fu
-fummo
-foste
-furono
-fossi
-fosse
-fossimo
-fossero
-essendo
-
-               | forms of fare, to do (not including the infinitive, fa, fat-):
-faccio
-fai
-facciamo
-fanno
-faccia
-facciate
-facciano
-farò
-farai
-farà
-faremo
-farete
-faranno
-farei
-faresti
-farebbe
-faremmo
-fareste
-farebbero
-facevo
-facevi
-faceva
-facevamo
-facevate
-facevano
-feci
-facesti
-fece
-facemmo
-faceste
-fecero
-facessi
-facesse
-facessimo
-facessero
-facendo
-
-               | forms of stare, to be (not including the infinitive):
-sto
-stai
-sta
-stiamo
-stanno
-stia
-stiate
-stiano
-starò
-starai
-starà
-staremo
-starete
-staranno
-starei
-staresti
-starebbe
-staremmo
-stareste
-starebbero
-stavo
-stavi
-stava
-stavamo
-stavate
-stavano
-stetti
-stesti
-stette
-stemmo
-steste
-stettero
-stessi
-stesse
-stessimo
-stessero
-stando

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ja.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ja.txt
deleted file mode 100644 (file)
index d4321be..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ja.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-#
-# This file defines a stopword set for Japanese.
-#
-# This set is made up of hand-picked frequent terms from segmented Japanese Wikipedia.
-# Punctuation characters and frequent kanji have mostly been left out.  See LUCENE-3745
-# for frequency lists, etc. that can be useful for making your own set (if desired)
-#
-# Note that there is an overlap between these stopwords and the terms stopped when used
-# in combination with the JapanesePartOfSpeechStopFilter.  When editing this file, note
-# that comments are not allowed on the same line as stopwords.
-#
-# Also note that stopping is done in a case-insensitive manner.  Change your StopFilter
-# configuration if you need case-sensitive stopping.  Lastly, note that stopping is done
-# using the same character width as the entries in this file.  Since this StopFilter is
-# normally done after a CJKWidthFilter in your chain, you would usually want your romaji
-# entries to be in half-width and your kana entries to be in full-width.
-#
-の
-に
-は
-を
-た
-が
-で
-て
-と
-し
-れ
-さ
-ある
-いる
-も
-する
-から
-な
-こと
-として
-い
-や
-れる
-など
-なっ
-ない
-この
-ため
-その
-あっ
-よう
-また
-もの
-という
-あり
-まで
-られ
-なる
-へ
-か
-だ
-これ
-によって
-により
-おり
-より
-による
-ず
-なり
-られる
-において
-ば
-なかっ
-なく
-しかし
-について
-せ
-だっ
-その後
-できる
-それ
-う
-ので
-なお
-のみ
-でき
-き
-つ
-における
-および
-いう
-さらに
-でも
-ら
-たり
-その他
-に関する
-たち
-ます
-ん
-なら
-に対して
-特に
-せる
-及び
-これら
-とき
-では
-にて
-ほか
-ながら
-うち
-そして
-とともに
-ただし
-かつて
-それぞれ
-または
-お
-ほど
-ものの
-に対する
-ほとんど
-と共に
-といった
-です
-とも
-ところ
-ここ
-##### End of file

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_lv.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_lv.txt
deleted file mode 100644 (file)
index e21a23c..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_lv.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-# Set of Latvian stopwords from A Stemming Algorithm for Latvian, Karlis Kreslins
-# the original list of over 800 forms was refined: 
-#   pronouns, adverbs, interjections were removed
-# 
-# prepositions
-aiz
-ap
-ar
-apakš
-ārpus
-augšpus
-bez
-caur
-dēļ
-gar
-iekš
-iz
-kopš
-labad
-lejpus
-līdz
-no
-otrpus
-pa
-par
-pār
-pēc
-pie
-pirms
-pret
-priekš
-starp
-šaipus
-uz
-viņpus
-virs
-virspus
-zem
-apakšpus
-# Conjunctions
-un
-bet
-jo
-ja
-ka
-lai
-tomēr
-tikko
-turpretī
-arī
-kaut
-gan
-tādēļ
-tā
-ne
-tikvien
-vien
-kā
-ir
-te
-vai
-kamēr
-# Particles
-ar
-diezin
-droši
-diemžēl
-nebūt
-ik
-it
-taču
-nu
-pat
-tiklab
-iekšpus
-nedz
-tik
-nevis
-turpretim
-jeb
-iekam
-iekām
-iekāms
-kolīdz
-līdzko
-tiklīdz
-jebšu
-tālab
-tāpēc
-nekā
-itin
-jā
-jau
-jel
-nē
-nezin
-tad
-tikai
-vis
-tak
-iekams
-vien
-# modal verbs
-būt  
-biju 
-biji
-bija
-bijām
-bijāt
-esmu
-esi
-esam
-esat 
-būšu     
-būsi
-būs
-būsim
-būsiet
-tikt
-tiku
-tiki
-tika
-tikām
-tikāt
-tieku
-tiec
-tiek
-tiekam
-tiekat
-tikšu
-tiks
-tiksim
-tiksiet
-tapt
-tapi
-tapāt
-topat
-tapšu
-tapsi
-taps
-tapsim
-tapsiet
-kļūt
-kļuvu
-kļuvi
-kļuva
-kļuvām
-kļuvāt
-kļūstu
-kļūsti
-kļūst
-kļūstam
-kļūstat
-kļūšu
-kļūsi
-kļūs
-kļūsim
-kļūsiet
-# verbs
-varēt
-varēju
-varējām
-varēšu
-varēsim
-var
-varēji
-varējāt
-varēsi
-varēsiet
-varat
-varēja
-varēs

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_nl.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_nl.txt
deleted file mode 100644 (file)
index f4d61f5..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_nl.txt
+++ /dev/null
@@ -1,117 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/dutch/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Dutch stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
- | This is a ranked list (commonest to rarest) of stopwords derived from
- | a large sample of Dutch text.
-
- | Dutch stop words frequently exhibit homonym clashes. These are indicated
- | clearly below.
-
-de             |  the
-en             |  and
-van            |  of, from
-ik             |  I, the ego
-te             |  (1) chez, at etc, (2) to, (3) too
-dat            |  that, which
-die            |  that, those, who, which
-in             |  in, inside
-een            |  a, an, one
-hij            |  he
-het            |  the, it
-niet           |  not, nothing, naught
-zijn           |  (1) to be, being, (2) his, one's, its
-is             |  is
-was            |  (1) was, past tense of all persons sing. of 'zijn' (to be) (2) wax, (3) the washing, (4) rise of river
-op             |  on, upon, at, in, up, used up
-aan            |  on, upon, to (as dative)
-met            |  with, by
-als            |  like, such as, when
-voor           |  (1) before, in front of, (2) furrow
-had            |  had, past tense all persons sing. of 'hebben' (have)
-er             |  there
-maar           |  but, only
-om             |  round, about, for etc
-hem            |  him
-dan            |  then
-zou            |  should/would, past tense all persons sing. of 'zullen'
-of             |  or, whether, if
-wat            |  what, something, anything
-mijn           |  possessive and noun 'mine'
-men            |  people, 'one'
-dit            |  this
-zo             |  so, thus, in this way
-door           |  through by
-over           |  over, across
-ze             |  she, her, they, them
-zich           |  oneself
-bij            |  (1) a bee, (2) by, near, at
-ook            |  also, too
-tot            |  till, until
-je             |  you
-mij            |  me
-uit            |  out of, from
-der            |  Old Dutch form of 'van der' still found in surnames
-daar           |  (1) there, (2) because
-haar           |  (1) her, their, them, (2) hair
-naar           |  (1) unpleasant, unwell etc, (2) towards, (3) as
-heb            |  present first person sing. of 'to have'
-hoe            |  how, why
-heeft          |  present third person sing. of 'to have'
-hebben         |  'to have' and various parts thereof
-deze           |  this
-u              |  you
-want           |  (1) for, (2) mitten, (3) rigging
-nog            |  yet, still
-zal            |  'shall', first and third person sing. of verb 'zullen' (will)
-me             |  me
-zij            |  she, they
-nu             |  now
-ge             |  'thou', still used in Belgium and south Netherlands
-geen           |  none
-omdat          |  because
-iets           |  something, somewhat
-worden         |  to become, grow, get
-toch           |  yet, still
-al             |  all, every, each
-waren          |  (1) 'were' (2) to wander, (3) wares, (3)
-veel           |  much, many
-meer           |  (1) more, (2) lake
-doen           |  to do, to make
-toen           |  then, when
-moet           |  noun 'spot/mote' and present form of 'to must'
-ben            |  (1) am, (2) 'are' in interrogative second person singular of 'to be'
-zonder         |  without
-kan            |  noun 'can' and present form of 'to be able'
-hun            |  their, them
-dus            |  so, consequently
-alles          |  all, everything, anything
-onder          |  under, beneath
-ja             |  yes, of course
-eens           |  once, one day
-hier           |  here
-wie            |  who
-werd           |  imperfect third person sing. of 'become'
-altijd         |  always
-doch           |  yet, but etc
-wordt          |  present third person sing. of 'become'
-wezen          |  (1) to be, (2) 'been' as in 'been fishing', (3) orphans
-kunnen         |  to be able
-ons            |  us/our
-zelf           |  self
-tegen          |  against, towards, at
-na             |  after, near
-reeds          |  already
-wil            |  (1) present tense of 'want', (2) 'will', noun, (3) fender
-kon            |  could; past tense of 'to be able'
-niets          |  nothing
-uw             |  your
-iemand         |  somebody
-geweest        |  been; past participle of 'be'
-andere         |  other

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_no.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_no.txt
deleted file mode 100644 (file)
index e76f36e..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_no.txt
+++ /dev/null
@@ -1,192 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/norwegian/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Norwegian stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
- | This stop word list is for the dominant bokmål dialect. Words unique
- | to nynorsk are marked *.
-
- | Revised by Jan Bruusgaard <Jan.Bruusgaard@ssb.no>, Jan 2005
-
-og             | and
-i              | in
-jeg            | I
-det            | it/this/that
-at             | to (w. inf.)
-en             | a/an
-et             | a/an
-den            | it/this/that
-til            | to
-er             | is/am/are
-som            | who/that
-på             | on
-de             | they / you(formal)
-med            | with
-han            | he
-av             | of
-ikke           | not
-ikkje          | not *
-der            | there
-så             | so
-var            | was/were
-meg            | me
-seg            | you
-men            | but
-ett            | one
-har            | have
-om             | about
-vi             | we
-min            | my
-mitt           | my
-ha             | have
-hadde          | had
-hun            | she
-nå             | now
-over           | over
-da             | when/as
-ved            | by/know
-fra            | from
-du             | you
-ut             | out
-sin            | your
-dem            | them
-oss            | us
-opp            | up
-man            | you/one
-kan            | can
-hans           | his
-hvor           | where
-eller          | or
-hva            | what
-skal           | shall/must
-selv           | self (reflective)
-sjøl           | self (reflective)
-her            | here
-alle           | all
-vil            | will
-bli            | become
-ble            | became
-blei           | became *
-blitt          | have become
-kunne          | could
-inn            | in
-når            | when
-være           | be
-kom            | come
-noen           | some
-noe            | some
-ville          | would
-dere           | you
-som            | who/which/that
-deres          | their/theirs
-kun            | only/just
-ja             | yes
-etter          | after
-ned            | down
-skulle         | should
-denne          | this
-for            | for/because
-deg            | you
-si             | hers/his
-sine           | hers/his
-sitt           | hers/his
-mot            | against
-å              | to
-meget          | much
-hvorfor        | why
-dette          | this
-disse          | these/those
-uten           | without
-hvordan        | how
-ingen          | none
-din            | your
-ditt           | your
-blir           | become
-samme          | same
-hvilken        | which
-hvilke         | which (plural)
-sånn           | such a
-inni           | inside/within
-mellom         | between
-vår            | our
-hver           | each
-hvem           | who
-vors           | us/ours
-hvis           | whose
-både           | both
-bare           | only/just
-enn            | than
-fordi          | as/because
-før            | before
-mange          | many
-også           | also
-slik           | just
-vært           | been
-være           | to be
-båe            | both *
-begge          | both
-siden          | since
-dykk           | your *
-dykkar         | yours *
-dei            | they *
-deira          | them *
-deires         | theirs *
-deim           | them *
-di             | your (fem.) *
-då             | as/when *
-eg             | I *
-ein            | a/an *
-eit            | a/an *
-eitt           | a/an *
-elles          | or *
-honom          | he *
-hjå            | at *
-ho             | she *
-hoe            | she *
-henne          | her
-hennar         | her/hers
-hennes         | hers
-hoss           | how *
-hossen         | how *
-ikkje          | not *
-ingi           | noone *
-inkje          | noone *
-korleis        | how *
-korso          | how *
-kva            | what/which *
-kvar           | where *
-kvarhelst      | where *
-kven           | who/whom *
-kvi            | why *
-kvifor         | why *
-me             | we *
-medan          | while *
-mi             | my *
-mine           | my *
-mykje          | much *
-no             | now *
-nokon          | some (masc./neut.) *
-noka           | some (fem.) *
-nokor          | some *
-noko           | some *
-nokre          | some *
-si             | his/hers *
-sia            | since *
-sidan          | since *
-so             | so *
-somt           | some *
-somme          | some *
-um             | about*
-upp            | up *
-vere           | be *
-vore           | was *
-verte          | become *
-vort           | become *
-varte          | became *
-vart           | became *
-

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_pt.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_pt.txt
deleted file mode 100644 (file)
index 276c1b4..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_pt.txt
+++ /dev/null
@@ -1,251 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/portuguese/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Portuguese stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
-
- | The following is a ranked list (commonest to rarest) of stopwords
- | deriving from a large sample of text.
-
- | Extra words have been added at the end.
-
-de             |  of, from
-a              |  the; to, at; her
-o              |  the; him
-que            |  who, that
-e              |  and
-do             |  de + o
-da             |  de + a
-em             |  in
-um             |  a
-para           |  for
-  | é          from SER
-com            |  with
-não            |  not, no
-uma            |  a
-os             |  the; them
-no             |  em + o
-se             |  himself etc
-na             |  em + a
-por            |  for
-mais           |  more
-as             |  the; them
-dos            |  de + os
-como           |  as, like
-mas            |  but
-  | foi        from SER
-ao             |  a + o
-ele            |  he
-das            |  de + as
-  | tem        from TER
-à              |  a + a
-seu            |  his
-sua            |  her
-ou             |  or
-  | ser        from SER
-quando         |  when
-muito          |  much
-  | há         from HAV
-nos            |  em + os; us
-já             |  already, now
-  | está       from EST
-eu             |  I
-também         |  also
-só             |  only, just
-pelo           |  per + o
-pela           |  per + a
-até            |  up to
-isso           |  that
-ela            |  he
-entre          |  between
-  | era        from SER
-depois         |  after
-sem            |  without
-mesmo          |  same
-aos            |  a + os
-  | ter        from TER
-seus           |  his
-quem           |  whom
-nas            |  em + as
-me             |  me
-esse           |  that
-eles           |  they
-  | estão      from EST
-você           |  you
-  | tinha      from TER
-  | foram      from SER
-essa           |  that
-num            |  em + um
-nem            |  nor
-suas           |  her
-meu            |  my
-às             |  a + as
-minha          |  my
-  | têm        from TER
-numa           |  em + uma
-pelos          |  per + os
-elas           |  they
-  | havia      from HAV
-  | seja       from SER
-qual           |  which
-  | será       from SER
-nós            |  we
-  | tenho      from TER
-lhe            |  to him, her
-deles          |  of them
-essas          |  those
-esses          |  those
-pelas          |  per + as
-este           |  this
-  | fosse      from SER
-dele           |  of him
-
- | other words. There are many contractions such as naquele = em+aquele,
- | mo = me+o, but they are rare.
- | Indefinite article plural forms are also rare.
-
-tu             |  thou
-te             |  thee
-vocês          |  you (plural)
-vos            |  you
-lhes           |  to them
-meus           |  my
-minhas
-teu            |  thy
-tua
-teus
-tuas
-nosso          | our
-nossa
-nossos
-nossas
-
-dela           |  of her
-delas          |  of them
-
-esta           |  this
-estes          |  these
-estas          |  these
-aquele         |  that
-aquela         |  that
-aqueles        |  those
-aquelas        |  those
-isto           |  this
-aquilo         |  that
-
-               | forms of estar, to be (not including the infinitive):
-estou
-está
-estamos
-estão
-estive
-esteve
-estivemos
-estiveram
-estava
-estávamos
-estavam
-estivera
-estivéramos
-esteja
-estejamos
-estejam
-estivesse
-estivéssemos
-estivessem
-estiver
-estivermos
-estiverem
-
-               | forms of haver, to have (not including the infinitive):
-hei
-há
-havemos
-hão
-houve
-houvemos
-houveram
-houvera
-houvéramos
-haja
-hajamos
-hajam
-houvesse
-houvéssemos
-houvessem
-houver
-houvermos
-houverem
-houverei
-houverá
-houveremos
-houverão
-houveria
-houveríamos
-houveriam
-
-               | forms of ser, to be (not including the infinitive):
-sou
-somos
-são
-era
-éramos
-eram
-fui
-foi
-fomos
-foram
-fora
-fôramos
-seja
-sejamos
-sejam
-fosse
-fôssemos
-fossem
-for
-formos
-forem
-serei
-será
-seremos
-serão
-seria
-seríamos
-seriam
-
-               | forms of ter, to have (not including the infinitive):
-tenho
-tem
-temos
-tém
-tinha
-tínhamos
-tinham
-tive
-teve
-tivemos
-tiveram
-tivera
-tivéramos
-tenha
-tenhamos
-tenham
-tivesse
-tivéssemos
-tivessem
-tiver
-tivermos
-tiverem
-terei
-terá
-teremos
-terão
-teria
-teríamos
-teriam

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ro.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ro.txt
deleted file mode 100644 (file)
index 4fdee90..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ro.txt
+++ /dev/null
@@ -1,233 +0,0 @@
-# This file was created by Jacques Savoy and is distributed under the BSD license.
-# See http://members.unine.ch/jacques.savoy/clef/index.html.
-# Also see http://www.opensource.org/licenses/bsd-license.html
-acea
-aceasta
-această
-aceea
-acei
-aceia
-acel
-acela
-acele
-acelea
-acest
-acesta
-aceste
-acestea
-aceşti
-aceştia
-acolo
-acum
-ai
-aia
-aibă
-aici
-al
-ăla
-ale
-alea
-ălea
-altceva
-altcineva
-am
-ar
-are
-aş
-aşadar
-asemenea
-asta
-ăsta
-astăzi
-astea
-ăstea
-ăştia
-asupra
-aţi
-au
-avea
-avem
-aveţi
-azi
-bine
-bucur
-bună
-ca
-că
-căci
-când
-care
-cărei
-căror
-cărui
-cât
-câte
-câţi
-către
-câtva
-ce
-cel
-ceva
-chiar
-cînd
-cine
-cineva
-cît
-cîte
-cîţi
-cîtva
-contra
-cu
-cum
-cumva
-curând
-curînd
-da
-dă
-dacă
-dar
-datorită
-de
-deci
-deja
-deoarece
-departe
-deşi
-din
-dinaintea
-dintr
-dintre
-drept
-după
-ea
-ei
-el
-ele
-eram
-este
-eşti
-eu
-face
-fără
-fi
-fie
-fiecare
-fii
-fim
-fiţi
-iar
-ieri
-îi
-îl
-îmi
-împotriva
-în 
-înainte
-înaintea
-încât
-încît
-încotro
-între
-întrucât
-întrucît
-îţi
-la
-lângă
-le
-li
-lîngă
-lor
-lui
-mă
-mâine
-mea
-mei
-mele
-mereu
-meu
-mi
-mine
-mult
-multă
-mulţi
-ne
-nicăieri
-nici
-nimeni
-nişte
-noastră
-noastre
-noi
-noştri
-nostru
-nu
-ori
-oricând
-oricare
-oricât
-orice
-oricînd
-oricine
-oricît
-oricum
-oriunde
-până
-pe
-pentru
-peste
-pînă
-poate
-pot
-prea
-prima
-primul
-prin
-printr
-sa
-să
-săi
-sale
-sau
-său
-se
-şi
-sînt
-sîntem
-sînteţi
-spre
-sub
-sunt
-suntem
-sunteţi
-ta
-tăi
-tale
-tău
-te
-ţi
-ţie
-tine
-toată
-toate
-tot
-toţi
-totuşi
-tu
-un
-una
-unde
-undeva
-unei
-unele
-uneori
-unor
-vă
-vi
-voastră
-voastre
-voi
-voştri
-vostru
-vouă
-vreo
-vreun

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ru.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ru.txt
deleted file mode 100644 (file)
index 6430769..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_ru.txt
+++ /dev/null
@@ -1,241 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/russian/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | a russian stop word list. comments begin with vertical bar. each stop
- | word is at the start of a line.
-
- | this is a ranked list (commonest to rarest) of stopwords derived from
- | a large text sample.
-
- | letter `ё' is translated to `е'.
-
-и              | and
-в              | in/into
-во             | alternative form
-не             | not
-что            | what/that
-он             | he
-на             | on/onto
-я              | i
-с              | from
-со             | alternative form
-как            | how
-а              | milder form of `no' (but)
-то             | conjunction and form of `that'
-все            | all
-она            | she
-так            | so, thus
-его            | him
-но             | but
-да             | yes/and
-ты             | thou
-к              | towards, by
-у              | around, chez
-же             | intensifier particle
-вы             | you
-за             | beyond, behind
-бы             | conditional/subj. particle
-по             | up to, along
-только         | only
-ее             | her
-мне            | to me
-было           | it was
-вот            | here is/are, particle
-от             | away from
-меня           | me
-еще            | still, yet, more
-нет            | no, there isnt/arent
-о              | about
-из             | out of
-ему            | to him
-теперь         | now
-когда          | when
-даже           | even
-ну             | so, well
-вдруг          | suddenly
-ли             | interrogative particle
-если           | if
-уже            | already, but homonym of `narrower'
-или            | or
-ни             | neither
-быть           | to be
-был            | he was
-него           | prepositional form of его
-до             | up to
-вас            | you accusative
-нибудь         | indef. suffix preceded by hyphen
-опять          | again
-уж             | already, but homonym of `adder'
-вам            | to you
-сказал         | he said
-ведь           | particle `after all'
-там            | there
-потом          | then
-себя           | oneself
-ничего         | nothing
-ей             | to her
-может          | usually with `быть' as `maybe'
-они            | they
-тут            | here
-где            | where
-есть           | there is/are
-надо           | got to, must
-ней            | prepositional form of  ей
-для            | for
-мы             | we
-тебя           | thee
-их             | them, their
-чем            | than
-была           | she was
-сам            | self
-чтоб           | in order to
-без            | without
-будто          | as if
-человек        | man, person, one
-чего           | genitive form of `what'
-раз            | once
-тоже           | also
-себе           | to oneself
-под            | beneath
-жизнь          | life
-будет          | will be
-ж              | short form of intensifer particle `же'
-тогда          | then
-кто            | who
-этот           | this
-говорил        | was saying
-того           | genitive form of `that'
-потому         | for that reason
-этого          | genitive form of `this'
-какой          | which
-совсем         | altogether
-ним            | prepositional form of `его', `они'
-здесь          | here
-этом           | prepositional form of `этот'
-один           | one
-почти          | almost
-мой            | my
-тем            | instrumental/dative plural of `тот', `то'
-чтобы          | full form of `in order that'
-нее            | her (acc.)
-кажется        | it seems
-сейчас         | now
-были           | they were
-куда           | where to
-зачем          | why
-сказать        | to say
-всех           | all (acc., gen. preposn. plural)
-никогда        | never
-сегодня        | today
-можно          | possible, one can
-при            | by
-наконец        | finally
-два            | two
-об             | alternative form of `о', about
-другой         | another
-хоть           | even
-после          | after
-над            | above
-больше         | more
-тот            | that one (masc.)
-через          | across, in
-эти            | these
-нас            | us
-про            | about
-всего          | in all, only, of all
-них            | prepositional form of `они' (they)
-какая          | which, feminine
-много          | lots
-разве          | interrogative particle
-сказала        | she said
-три            | three
-эту            | this, acc. fem. sing.
-моя            | my, feminine
-впрочем        | moreover, besides
-хорошо         | good
-свою           | ones own, acc. fem. sing.
-этой           | oblique form of `эта', fem. `this'
-перед          | in front of
-иногда         | sometimes
-лучше          | better
-чуть           | a little
-том            | preposn. form of `that one'
-нельзя         | one must not
-такой          | such a one
-им             | to them
-более          | more
-всегда         | always
-конечно        | of course
-всю            | acc. fem. sing of `all'
-между          | between
-
-
-  | b: some paradigms
-  |
-  | personal pronouns
-  |
-  | я  меня  мне  мной  [мною]
-  | ты  тебя  тебе  тобой  [тобою]
-  | он  его  ему  им  [него, нему, ним]
-  | она  ее  эи  ею  [нее, нэи, нею]
-  | оно  его  ему  им  [него, нему, ним]
-  |
-  | мы  нас  нам  нами
-  | вы  вас  вам  вами
-  | они  их  им  ими  [них, ним, ними]
-  |
-  |   себя  себе  собой   [собою]
-  |
-  | demonstrative pronouns: этот (this), тот (that)
-  |
-  | этот  эта  это  эти
-  | этого  эты  это  эти
-  | этого  этой  этого  этих
-  | этому  этой  этому  этим
-  | этим  этой  этим  [этою]  этими
-  | этом  этой  этом  этих
-  |
-  | тот  та  то  те
-  | того  ту  то  те
-  | того  той  того  тех
-  | тому  той  тому  тем
-  | тем  той  тем  [тою]  теми
-  | том  той  том  тех
-  |
-  | determinative pronouns
-  |
-  | (a) весь (all)
-  |
-  | весь  вся  все  все
-  | всего  всю  все  все
-  | всего  всей  всего  всех
-  | всему  всей  всему  всем
-  | всем  всей  всем  [всею]  всеми
-  | всем  всей  всем  всех
-  |
-  | (b) сам (himself etc)
-  |
-  | сам  сама  само  сами
-  | самого саму  само  самих
-  | самого самой самого  самих
-  | самому самой самому  самим
-  | самим  самой  самим  [самою]  самими
-  | самом самой самом  самих
-  |
-  | stems of verbs `to be', `to have', `to do' and modal
-  |
-  | быть  бы  буд  быв  есть  суть
-  | име
-  | дел
-  | мог   мож  мочь
-  | уме
-  | хоч  хот
-  | долж
-  | можн
-  | нужн
-  | нельзя
-

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_sv.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_sv.txt
deleted file mode 100644 (file)
index 22bddfd..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_sv.txt
+++ /dev/null
@@ -1,131 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/swedish/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Swedish stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
- | This is a ranked list (commonest to rarest) of stopwords derived from
- | a large text sample.
-
- | Swedish stop words occasionally exhibit homonym clashes. For example
- |  så = so, but also seed. These are indicated clearly below.
-
-och            | and
-det            | it, this/that
-att            | to (with infinitive)
-i              | in, at
-en             | a
-jag            | I
-hon            | she
-som            | who, that
-han            | he
-på             | on
-den            | it, this/that
-med            | with
-var            | where, each
-sig            | him(self) etc
-för            | for
-så             | so (also: seed)
-till           | to
-är             | is
-men            | but
-ett            | a
-om             | if; around, about
-hade           | had
-de             | they, these/those
-av             | of
-icke           | not, no
-mig            | me
-du             | you
-henne          | her
-då             | then, when
-sin            | his
-nu             | now
-har            | have
-inte           | inte någon = no one
-hans           | his
-honom          | him
-skulle         | 'sake'
-hennes         | her
-där            | there
-min            | my
-man            | one (pronoun)
-ej             | nor
-vid            | at, by, on (also: vast)
-kunde          | could
-något          | some etc
-från           | from, off
-ut             | out
-när            | when
-efter          | after, behind
-upp            | up
-vi             | we
-dem            | them
-vara           | be
-vad            | what
-över           | over
-än             | than
-dig            | you
-kan            | can
-sina           | his
-här            | here
-ha             | have
-mot            | towards
-alla           | all
-under          | under (also: wonder)
-någon          | some etc
-eller          | or (else)
-allt           | all
-mycket         | much
-sedan          | since
-ju             | why
-denna          | this/that
-själv          | myself, yourself etc
-detta          | this/that
-åt             | to
-utan           | without
-varit          | was
-hur            | how
-ingen          | no
-mitt           | my
-ni             | you
-bli            | to be, become
-blev           | from bli
-oss            | us
-din            | thy
-dessa          | these/those
-några          | some etc
-deras          | their
-blir           | from bli
-mina           | my
-samma          | (the) same
-vilken         | who, that
-er             | you, your
-sådan          | such a
-vår            | our
-blivit         | from bli
-dess           | its
-inom           | within
-mellan         | between
-sådant         | such a
-varför         | why
-varje          | each
-vilka          | who, that
-ditt           | thy
-vem            | who
-vilket         | who, that
-sitta          | his
-sådana         | such a
-vart           | each
-dina           | thy
-vars           | whose
-vårt           | our
-våra           | our
-ert            | your
-era            | your
-vilkas         | whose
-

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_th.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_th.txt
deleted file mode 100644 (file)
index 07f0fab..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_th.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-# Thai stopwords from:
-# "Opinion Detection in Thai Political News Columns
-# Based on Subjectivity Analysis"
-# Khampol Sukhum, Supot Nitsuwat, and Choochart Haruechaiyasak
-ไว้
-ไม่
-ไป
-ได้
-ให้
-ใน
-โดย
-แห่ง
-แล้ว
-และ
-แรก
-แบบ
-แต่
-เอง
-เห็น
-เลย
-เริ่ม
-เรา
-เมื่อ
-เพื่อ
-เพราะ
-เป็นการ
-เป็น
-เปิดเผย
-เปิด
-เนื่องจาก
-เดียวกัน
-เดียว
-เช่น
-เฉพาะ
-เคย
-เข้า
-เขา
-อีก
-อาจ
-อะไร
-ออก
-อย่าง
-อยู่
-อยาก
-หาก
-หลาย
-หลังจาก
-หลัง
-หรือ
-หนึ่ง
-ส่วน
-ส่ง
-สุด
-สําหรับ
-ว่า
-วัน
-ลง
-ร่วม
-ราย
-รับ
-ระหว่าง
-รวม
-ยัง
-มี
-มาก
-มา
-พร้อม
-พบ
-ผ่าน
-ผล
-บาง
-น่า
-นี้
-นํา
-นั้น
-นัก
-นอกจาก
-ทุก
-ที่สุด
-ที่
-ทําให้
-ทํา
-ทาง
-ทั้งนี้
-ทั้ง
-ถ้า
-ถูก
-ถึง
-ต้อง
-ต่างๆ
-ต่าง
-ต่อ
-ตาม
-ตั้งแต่
-ตั้ง
-ด้าน
-ด้วย
-ดัง
-ซึ่ง
-ช่วง
-จึง
-จาก
-จัด
-จะ
-คือ
-ความ
-ครั้ง
-คง
-ขึ้น
-ของ
-ขอ
-ขณะ
-ก่อน
-ก็
-การ
-กับ
-กัน
-กว่า
-กล่าว

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_tr.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_tr.txt
deleted file mode 100644 (file)
index 84d9408..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/stopwords_tr.txt
+++ /dev/null
@@ -1,212 +0,0 @@
-# Turkish stopwords from LUCENE-559
-# merged with the list from "Information Retrieval on Turkish Texts"
-#   (http://www.users.muohio.edu/canf/papers/JASIST2008offPrint.pdf)
-acaba
-altmış
-altı
-ama
-ancak
-arada
-aslında
-ayrıca
-bana
-bazı
-belki
-ben
-benden
-beni
-benim
-beri
-beş
-bile
-bin
-bir
-birçok
-biri
-birkaç
-birkez
-birşey
-birşeyi
-biz
-bize
-bizden
-bizi
-bizim
-böyle
-böylece
-bu
-buna
-bunda
-bundan
-bunlar
-bunları
-bunların
-bunu
-bunun
-burada
-çok
-çünkü
-da
-daha
-dahi
-de
-defa
-değil
-diğer
-diye
-doksan
-dokuz
-dolayı
-dolayısıyla
-dört
-edecek
-eden
-ederek
-edilecek
-ediliyor
-edilmesi
-ediyor
-eğer
-elli
-en
-etmesi
-etti
-ettiği
-ettiğini
-gibi
-göre
-halen
-hangi
-hatta
-hem
-henüz
-hep
-hepsi
-her
-herhangi
-herkesin
-hiç
-hiçbir
-için
-iki
-ile
-ilgili
-ise
-işte
-itibaren
-itibariyle
-kadar
-karşın
-katrilyon
-kendi
-kendilerine
-kendini
-kendisi
-kendisine
-kendisini
-kez
-ki
-kim
-kimden
-kime
-kimi
-kimse
-kırk
-milyar
-milyon
-mu
-mü
-mı
-nasıl
-ne
-neden
-nedenle
-nerde
-nerede
-nereye
-niye
-niçin
-o
-olan
-olarak
-oldu
-olduğu
-olduğunu
-olduklarını
-olmadı
-olmadığı
-olmak
-olması
-olmayan
-olmaz
-olsa
-olsun
-olup
-olur
-olursa
-oluyor
-on
-ona
-ondan
-onlar
-onlardan
-onları
-onların
-onu
-onun
-otuz
-oysa
-öyle
-pek
-rağmen
-sadece
-sanki
-sekiz
-seksen
-sen
-senden
-seni
-senin
-siz
-sizden
-sizi
-sizin
-şey
-şeyden
-şeyi
-şeyler
-şöyle
-şu
-şuna
-şunda
-şundan
-şunları
-şunu
-tarafından
-trilyon
-tüm
-üç
-üzere
-var
-vardı
-ve
-veya
-ya
-yani
-yapacak
-yapılan
-yapılması
-yapıyor
-yapmak
-yaptı
-yaptığı
-yaptığını
-yaptıkları
-yedi
-yerine
-yetmiş
-yine
-yirmi
-yoksa
-yüz
-zaten

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/lang/userdict_ja.txt b/zookeeper/example-schemaless/solr/collection1/conf/lang/userdict_ja.txt
deleted file mode 100644 (file)
index 6f0368e..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/lang/userdict_ja.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# This is a sample user dictionary for Kuromoji (JapaneseTokenizer)
-#
-# Add entries to this file in order to override the statistical model in terms
-# of segmentation, readings and part-of-speech tags.  Notice that entries do
-# not have weights since they are always used when found.  This is by-design
-# in order to maximize ease-of-use.
-#
-# Entries are defined using the following CSV format:
-#  <text>,<token 1> ... <token n>,<reading 1> ... <reading n>,<part-of-speech tag>
-#
-# Notice that a single half-width space separates tokens and readings, and
-# that the number tokens and readings must match exactly.
-#
-# Also notice that multiple entries with the same <text> is undefined.
-#
-# Whitespace only lines are ignored.  Comments are not allowed on entry lines.
-#
-
-# Custom segmentation for kanji compounds
-日本経済新聞,日本 経済 新聞,ニホン ケイザイ シンブン,カスタム名詞
-関西国際空港,関西 国際 空港,カンサイ コクサイ クウコウ,カスタム名詞
-
-# Custom segmentation for compound katakana
-トートバッグ,トート バッグ,トート バッグ,かずカナ名詞
-ショルダーバッグ,ショルダー バッグ,ショルダー バッグ,かずカナ名詞
-
-# Custom reading for former sumo wrestler
-朝青龍,朝青龍,アサショウリュウ,カスタム人名

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/protwords.txt b/zookeeper/example-schemaless/solr/collection1/conf/protwords.txt
deleted file mode 100644 (file)
index 1dfc0ab..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/protwords.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#-----------------------------------------------------------------------
-# Use a protected word file to protect against the stemmer reducing two
-# unrelated words to the same base word.
-
-# Some non-words that normally won't be encountered,
-# just to test that they won't be stemmed.
-dontstems
-zwhacky
-

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/schema.xml b/zookeeper/example-schemaless/solr/collection1/conf/schema.xml
deleted file mode 100644 (file)
index a157715..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/schema.xml
+++ /dev/null
@@ -1,1072 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!--  
- This is the Solr schema file. This file should be named "schema.xml" and
- should be in the conf directory under the solr home
- (i.e. ./solr/conf/schema.xml by default) 
- or located where the classloader for the Solr webapp can find it.
-
- This example schema is the recommended starting point for users.
- It should be kept correct and concise, usable out-of-the-box.
-
- For more information, on how to customize this file, please see
- http://wiki.apache.org/solr/SchemaXml
-
- PERFORMANCE NOTE: this schema includes many optional features and should not
- be used for benchmarking.  To improve performance one could
-  - set stored="false" for all fields possible (esp large fields) when you
-    only need to search on the field but don't need to return the original
-    value.
-  - set indexed="false" if you don't need to search on the field, but only
-    return the field as a result of searching on other indexed fields.
-  - remove all unneeded copyField statements
-  - for best index size and searching performance, set "index" to false
-    for all general text fields, use copyField to copy them to the
-    catchall "text" field, and use that for searching.
-  - For maximum indexing performance, use the StreamingUpdateSolrServer
-    java client.
-  - Remember to run the JVM in server mode, and use a higher logging level
-    that avoids logging every request
--->
-
-<schema name="example-schemaless" version="1.5">
-  <!-- attribute "name" is the name of this schema and is only used for display purposes.
-       version="x.y" is Solr's version number for the schema syntax and 
-       semantics.  It should not normally be changed by applications.
-
-       1.0: multiValued attribute did not exist, all fields are multiValued 
-            by nature
-       1.1: multiValued attribute introduced, false by default 
-       1.2: omitTermFreqAndPositions attribute introduced, true by default 
-            except for text fields.
-       1.3: removed optional field compress feature
-       1.4: autoGeneratePhraseQueries attribute introduced to drive QueryParser
-            behavior when a single string produces multiple tokens.  Defaults 
-            to off for version >= 1.4
-       1.5: omitNorms defaults to true for primitive field types 
-            (int, float, boolean, string...)
-     -->
-
-  <fields>
-    <!-- Valid attributes for fields:
-     name: mandatory - the name for the field
-     type: mandatory - the name of a field type from the 
-       <types> fieldType section
-     indexed: true if this field should be indexed (searchable or sortable)
-     stored: true if this field should be retrievable
-     docValues: true if this field should have doc values. Doc values are
-       useful for faceting, grouping, sorting and function queries. Although not
-       required, doc values will make the index faster to load, more
-       NRT-friendly and more memory-efficient. They however come with some
-       limitations: they are currently only supported by StrField, UUIDField
-       and all Trie*Fields, and depending on the field type, they might
-       require the field to be single-valued, be required or have a default
-       value (check the documentation of the field type you're interested in
-       for more information)
-     multiValued: true if this field may contain multiple values per document
-     omitNorms: (expert) set to true to omit the norms associated with
-       this field (this disables length normalization and index-time
-       boosting for the field, and saves some memory).  Only full-text
-       fields or fields that need an index-time boost need norms.
-       Norms are omitted for primitive (non-analyzed) types by default.
-     termVectors: [false] set to true to store the term vector for a
-       given field.
-       When using MoreLikeThis, fields used for similarity should be
-       stored for best performance.
-     termPositions: Store position information with the term vector.  
-       This will increase storage costs.
-     termOffsets: Store offset information with the term vector. This 
-       will increase storage costs.
-     required: The field is required.  It will throw an error if the
-       value does not exist
-     default: a value that should be used if no value is specified
-       when adding a document.
-   -->
-
-    <!-- field names should consist of alphanumeric or underscore characters only and
-      not start with a digit.  This is not currently strictly enforced,
-      but other field names will not have first class support from all components
-      and back compatibility is not guaranteed.  Names with both leading and
-      trailing underscores (e.g. _version_) are reserved.
-   -->
-
-    <!-- In this "schemaless" example, only two fields are pre-declared: id and _version_.
-         All other fields will be type guessed and added via the
-         "add-unknown-fields-to-the-schema" update request processor chain declared 
-         in solrconfig.xml.
-      -->
-    <field name="id" type="string" indexed="true" stored="true" required="true" multiValued="false" />
-    <field name="_version_" type="long" indexed="true" stored="true"/>
-
-
-    <!-- Dynamic field definitions allow using convention over configuration
-       for fields via the specification of patterns to match field names. 
-       EXAMPLE:  name="*_i" will match any field ending in _i (like myid_i, z_i)
-       RESTRICTION: the glob-like pattern in the name attribute must have
-       a "*" only at the start or the end.  -->
-   
-    <dynamicField name="*_i"  type="int"    indexed="true"  stored="true"/>
-    <dynamicField name="*_is" type="int"    indexed="true"  stored="true"  multiValued="true"/>
-    <dynamicField name="*_s"  type="string"  indexed="true"  stored="true" />
-    <dynamicField name="*_ss" type="string"  indexed="true"  stored="true" multiValued="true"/>
-    <dynamicField name="*_l"  type="long"   indexed="true"  stored="true"/>
-    <dynamicField name="*_ls" type="long"   indexed="true"  stored="true"  multiValued="true"/>
-    <dynamicField name="*_t"  type="text_general"    indexed="true"  stored="true"/>
-    <dynamicField name="*_txt" type="text_general"   indexed="true"  stored="true" multiValued="true"/>
-    <dynamicField name="*_en"  type="text_en"    indexed="true"  stored="true" multiValued="true"/>
-    <dynamicField name="*_b"  type="boolean" indexed="true" stored="true"/>
-    <dynamicField name="*_bs" type="boolean" indexed="true" stored="true"  multiValued="true"/>
-    <dynamicField name="*_f"  type="float"  indexed="true"  stored="true"/>
-    <dynamicField name="*_fs" type="float"  indexed="true"  stored="true"  multiValued="true"/>
-    <dynamicField name="*_d"  type="double" indexed="true"  stored="true"/>
-    <dynamicField name="*_ds" type="double" indexed="true"  stored="true"  multiValued="true"/>
-
-    <!-- Type used to index the lat and lon components for the "location" FieldType -->
-    <dynamicField name="*_coordinate"  type="tdouble" indexed="true"  stored="false" />
-
-    <dynamicField name="*_dt"  type="date"    indexed="true"  stored="true"/>
-    <dynamicField name="*_dts" type="date"    indexed="true"  stored="true" multiValued="true"/>
-    <dynamicField name="*_p"  type="location" indexed="true" stored="true"/>
-
-    <!-- some trie-coded dynamic fields for faster range queries -->
-    <dynamicField name="*_ti" type="tint"    indexed="true"  stored="true"/>
-    <dynamicField name="*_tl" type="tlong"   indexed="true"  stored="true"/>
-    <dynamicField name="*_tf" type="tfloat"  indexed="true"  stored="true"/>
-    <dynamicField name="*_td" type="tdouble" indexed="true"  stored="true"/>
-    <dynamicField name="*_tdt" type="tdate"  indexed="true"  stored="true"/>
-
-    <dynamicField name="*_pi"  type="pint"    indexed="true"  stored="true"/>
-    <dynamicField name="*_c"   type="currency" indexed="true"  stored="true"/>
-
-    <dynamicField name="ignored_*" type="ignored" multiValued="true"/>
-    <dynamicField name="attr_*" type="text_general" indexed="true" stored="true" multiValued="true"/>
-
-    <dynamicField name="random_*" type="random" />
-
-    <!-- uncomment the following to ignore any fields that don't already match an existing 
-        field name or dynamic field, rather than reporting them as an error. 
-        alternately, change the type="ignored" to some other type e.g. "text" if you want 
-        unknown fields indexed and/or stored by default 
-        
-        NB: use of "*" dynamic fields will disable field type guessing and adding
-        unknown fields to the schema. --> 
-    <!--dynamicField name="*" type="ignored" multiValued="true" /-->
-   
-  </fields>
-
-
-  <!-- Field to use to determine and enforce document uniqueness. 
-      Unless this field is marked with required="false", it will be a required field
-   -->
-  <uniqueKey>id</uniqueKey>
-
-  <!-- DEPRECATED: The defaultSearchField is consulted by various query parsers when
-  parsing a query string that isn't explicit about the field.  Machine (non-user)
-  generated queries are best made explicit, or they can use the "df" request parameter
-  which takes precedence over this.
-  Note: Un-commenting defaultSearchField will be insufficient if your request handler
-  in solrconfig.xml defines "df", which takes precedence. That would need to be removed.
- <defaultSearchField>text</defaultSearchField> -->
-
-  <!-- DEPRECATED: The defaultOperator (AND|OR) is consulted by various query parsers
-  when parsing a query string to determine if a clause of the query should be marked as
-  required or optional, assuming the clause isn't already marked by some operator.
-  The default is OR, which is generally assumed so it is not a good idea to change it
-  globally here.  The "q.op" request parameter takes precedence over this.
- <solrQueryParser defaultOperator="OR"/> -->
-
-  <!-- copyField commands copy one field to another at the time a document
-        is added to the index.  It's used either to index the same field differently,
-        or to add multiple fields to the same field for easier/faster searching.
-
-   <copyField source="cat" dest="text"/>
-   <copyField source="name" dest="text"/>
-   <copyField source="manu" dest="text"/>
-   <copyField source="features" dest="text"/>
-   <copyField source="includes" dest="text"/>
-   <copyField source="manu" dest="manu_exact"/>
-   -->
-
-  <!-- Copy the price into a currency enabled field (default USD)
-   <copyField source="price" dest="price_c"/>
-   -->
-
-  <!-- Text fields from SolrCell to search by default in our catch-all field
-   <copyField source="title" dest="text"/>
-   <copyField source="author" dest="text"/>
-   <copyField source="description" dest="text"/>
-   <copyField source="keywords" dest="text"/>
-   <copyField source="content" dest="text"/>
-   <copyField source="content_type" dest="text"/>
-   <copyField source="resourcename" dest="text"/>
-   <copyField source="url" dest="text"/>
-   -->
-
-  <!-- Create a string version of author for faceting
-   <copyField source="author" dest="author_s"/>
-   -->
-       
-  <!-- Above, multiple source fields are copied to the [text] field. 
-         Another way to map multiple source fields to the same 
-         destination field is to use the dynamic field syntax. 
-         copyField also supports a maxChars to copy setting.  -->
-          
-  <!-- <copyField source="*_t" dest="text" maxChars="3000"/> -->
-
-  <!-- copy name to alphaNameSort, a field designed for sorting by name -->
-  <!-- <copyField source="name" dest="alphaNameSort"/> -->
- 
-  <types>
-    <!-- field type definitions. The "name" attribute is
-       just a label to be used by field definitions.  The "class"
-       attribute and any other attributes determine the real
-       behavior of the fieldType.
-         Class names starting with "solr" refer to java classes in a
-       standard package such as org.apache.solr.analysis
-    -->
-
-    <!-- The StrField type is not analyzed, but indexed/stored verbatim.
-       It supports doc values but in that case the field needs to be
-       single-valued and either required or have a default value.
-      -->
-    <fieldType name="string" class="solr.StrField" sortMissingLast="true" />
-
-    <!-- boolean type: "true" or "false" -->
-    <fieldType name="boolean" class="solr.BoolField" sortMissingLast="true"/>
-
-    <fieldType name="booleans" class="solr.BoolField" sortMissingLast="true" multiValued="true"/>
-
-    <!-- sortMissingLast and sortMissingFirst attributes are optional attributes are
-         currently supported on types that are sorted internally as strings
-         and on numeric types.
-            This includes "string","boolean", and, as of 3.5 (and 4.x),
-            int, float, long, date, double, including the "Trie" variants.
-       - If sortMissingLast="true", then a sort on this field will cause documents
-         without the field to come after documents with the field,
-         regardless of the requested sort order (asc or desc).
-       - If sortMissingFirst="true", then a sort on this field will cause documents
-         without the field to come before documents with the field,
-         regardless of the requested sort order.
-       - If sortMissingLast="false" and sortMissingFirst="false" (the default),
-         then default lucene sorting will be used which places docs without the
-         field first in an ascending sort and last in a descending sort.
-    -->    
-
-    <!--
-      Default numeric field types. For faster range queries, consider the tint/tfloat/tlong/tdouble types.
-
-      These fields support doc values, but they require the field to be
-      single-valued and either be required or have a default value.
-    -->
-    <fieldType name="int" class="solr.TrieIntField" precisionStep="0" positionIncrementGap="0"/>
-    <fieldType name="float" class="solr.TrieFloatField" precisionStep="0" positionIncrementGap="0"/>
-    <fieldType name="long" class="solr.TrieLongField" precisionStep="0" positionIncrementGap="0"/>
-    <fieldType name="double" class="solr.TrieDoubleField" precisionStep="0" positionIncrementGap="0"/>
-
-    <!--
-     Numeric field types that index each value at various levels of precision
-     to accelerate range queries when the number of values between the range
-     endpoints is large. See the javadoc for NumericRangeQuery for internal
-     implementation details.
-
-     Smaller precisionStep values (specified in bits) will lead to more tokens
-     indexed per value, slightly larger index size, and faster range queries.
-     A precisionStep of 0 disables indexing at different precision levels.
-    -->
-    <fieldType name="tint" class="solr.TrieIntField" precisionStep="8" positionIncrementGap="0"/>
-    <fieldType name="tfloat" class="solr.TrieFloatField" precisionStep="8" positionIncrementGap="0"/>
-    <fieldType name="tlong" class="solr.TrieLongField" precisionStep="8" positionIncrementGap="0"/>
-    <fieldType name="tdouble" class="solr.TrieDoubleField" precisionStep="8" positionIncrementGap="0"/>
-    
-    <fieldType name="tints" class="solr.TrieIntField" precisionStep="8" positionIncrementGap="0" multiValued="true"/>
-    <fieldType name="tfloats" class="solr.TrieFloatField" precisionStep="8" positionIncrementGap="0" multiValued="true"/>
-    <fieldType name="tlongs" class="solr.TrieLongField" precisionStep="8" positionIncrementGap="0" multiValued="true"/>
-    <fieldType name="tdoubles" class="solr.TrieDoubleField" precisionStep="8" positionIncrementGap="0" multiValued="true"/>
-
-    <!-- The format for this date field is of the form 1995-12-31T23:59:59Z, and
-         is a more restricted form of the canonical representation of dateTime
-         http://www.w3.org/TR/xmlschema-2/#dateTime    
-         The trailing "Z" designates UTC time and is mandatory.
-         Optional fractional seconds are allowed: 1995-12-31T23:59:59.999Z
-         All other components are mandatory.
-
-         Expressions can also be used to denote calculations that should be
-         performed relative to "NOW" to determine the value, ie...
-
-               NOW/HOUR
-                  ... Round to the start of the current hour
-               NOW-1DAY
-                  ... Exactly 1 day prior to now
-               NOW/DAY+6MONTHS+3DAYS
-                  ... 6 months and 3 days in the future from the start of
-                      the current day
-                      
-         Consult the DateField javadocs for more information.
-
-         Note: For faster range queries, consider the tdate type
-      -->
-    <fieldType name="date" class="solr.TrieDateField" precisionStep="0" positionIncrementGap="0"/>
-
-    <!-- A Trie based date field for faster date range queries and date faceting. -->
-    <fieldType name="tdate" class="solr.TrieDateField" precisionStep="6" positionIncrementGap="0"/>
-
-    <fieldType name="tdates" class="solr.TrieDateField" precisionStep="6" positionIncrementGap="0" multiValued="true"/>
-
-
-    <!--Binary data type. The data should be sent/retrieved in as Base64 encoded Strings -->
-    <fieldtype name="binary" class="solr.BinaryField"/>
-
-    <!--
-      Note:
-      These should only be used for compatibility with existing indexes (created with lucene or older Solr versions).
-      Use Trie based fields instead. As of Solr 3.5 and 4.x, Trie based fields support sortMissingFirst/Last
-      
-      Plain numeric field types that store and index the text
-      value verbatim (and hence don't correctly support range queries, since the
-      lexicographic ordering isn't equal to the numeric ordering)
-    -->
-    <fieldType name="pint" class="solr.IntField"/>
-    <fieldType name="plong" class="solr.LongField"/>
-    <fieldType name="pfloat" class="solr.FloatField"/>
-    <fieldType name="pdouble" class="solr.DoubleField"/>
-    <fieldType name="pdate" class="solr.DateField" sortMissingLast="true"/>
-
-    <!-- The "RandomSortField" is not used to store or search any
-         data.  You can declare fields of this type it in your schema
-         to generate pseudo-random orderings of your docs for sorting 
-         or function purposes.  The ordering is generated based on the field
-         name and the version of the index. As long as the index version
-         remains unchanged, and the same field name is reused,
-         the ordering of the docs will be consistent.  
-         If you want different psuedo-random orderings of documents,
-         for the same version of the index, use a dynamicField and
-         change the field name in the request.
-     -->
-    <fieldType name="random" class="solr.RandomSortField" indexed="true" />
-
-    <!-- solr.TextField allows the specification of custom text analyzers
-         specified as a tokenizer and a list of token filters. Different
-         analyzers may be specified for indexing and querying.
-
-         The optional positionIncrementGap puts space between multiple fields of
-         this type on the same document, with the purpose of preventing false phrase
-         matching across fields.
-
-         For more info on customizing your analyzer chain, please see
-         http://wiki.apache.org/solr/AnalyzersTokenizersTokenFilters
-     -->
-
-    <!-- One can also specify an existing Analyzer class that has a
-         default constructor via the class attribute on the analyzer element.
-         Example:
-    <fieldType name="text_greek" class="solr.TextField">
-      <analyzer class="org.apache.lucene.analysis.el.GreekAnalyzer"/>
-    </fieldType>
-    -->
-
-    <!-- A text field that only splits on whitespace for exact matching of words -->
-    <fieldType name="text_ws" class="solr.TextField" positionIncrementGap="100">
-      <analyzer>
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-      </analyzer>
-    </fieldType>
-
-    <!-- A general text field that has reasonable, generic
-         cross-language defaults: it tokenizes with StandardTokenizer,
-        removes stop words from case-insensitive "stopwords.txt"
-        (empty by default), and down cases.  At query time only, it
-        also applies synonyms. -->
-    <fieldType name="text_general" class="solr.TextField" positionIncrementGap="100" multiValued="true">
-      <analyzer type="index">
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" />
-        <!-- in this example, we will only use synonyms at query time
-        <filter class="solr.SynonymFilterFactory" synonyms="index_synonyms.txt" ignoreCase="true" expand="false"/>
-        -->
-        <filter class="solr.LowerCaseFilterFactory"/>
-      </analyzer>
-      <analyzer type="query">
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" />
-        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-      </analyzer>
-    </fieldType>
-
-    <!-- A text field with defaults appropriate for English: it
-         tokenizes with StandardTokenizer, removes English stop words
-         (lang/stopwords_en.txt), down cases, protects words from protwords.txt, and
-         finally applies Porter's stemming.  The query time analyzer
-         also applies synonyms from synonyms.txt. -->
-    <fieldType name="text_en" class="solr.TextField" positionIncrementGap="100">
-      <analyzer type="index">
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <!-- in this example, we will only use synonyms at query time
-        <filter class="solr.SynonymFilterFactory" synonyms="index_synonyms.txt" ignoreCase="true" expand="false"/>
-        -->
-        <!-- Case insensitive stop word removal.
-        -->
-        <filter class="solr.StopFilterFactory"
-                ignoreCase="true"
-                words="lang/stopwords_en.txt"
-            />
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.EnglishPossessiveFilterFactory"/>
-        <filter class="solr.KeywordMarkerFilterFactory" protected="protwords.txt"/>
-        <!-- Optionally you may want to use this less aggressive stemmer instead of PorterStemFilterFactory:
-        <filter class="solr.EnglishMinimalStemFilterFactory"/>
-       -->
-        <filter class="solr.PorterStemFilterFactory"/>
-      </analyzer>
-      <analyzer type="query">
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
-        <filter class="solr.StopFilterFactory"
-                ignoreCase="true"
-                words="lang/stopwords_en.txt"
-            />
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.EnglishPossessiveFilterFactory"/>
-        <filter class="solr.KeywordMarkerFilterFactory" protected="protwords.txt"/>
-        <!-- Optionally you may want to use this less aggressive stemmer instead of PorterStemFilterFactory:
-        <filter class="solr.EnglishMinimalStemFilterFactory"/>
-       -->
-        <filter class="solr.PorterStemFilterFactory"/>
-      </analyzer>
-    </fieldType>
-
-    <!-- A text field with defaults appropriate for English, plus
-        aggressive word-splitting and autophrase features enabled.
-        This field is just like text_en, except it adds
-        WordDelimiterFilter to enable splitting and matching of
-        words on case-change, alpha numeric boundaries, and
-        non-alphanumeric chars.  This means certain compound word
-        cases will work, for example query "wi fi" will match
-        document "WiFi" or "wi-fi".
-        -->
-    <fieldType name="text_en_splitting" class="solr.TextField" positionIncrementGap="100" autoGeneratePhraseQueries="true">
-      <analyzer type="index">
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <!-- in this example, we will only use synonyms at query time
-        <filter class="solr.SynonymFilterFactory" synonyms="index_synonyms.txt" ignoreCase="true" expand="false"/>
-        -->
-        <!-- Case insensitive stop word removal.
-        -->
-        <filter class="solr.StopFilterFactory"
-                ignoreCase="true"
-                words="lang/stopwords_en.txt"
-            />
-        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="1" catenateNumbers="1" catenateAll="0" splitOnCaseChange="1"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.KeywordMarkerFilterFactory" protected="protwords.txt"/>
-        <filter class="solr.PorterStemFilterFactory"/>
-      </analyzer>
-      <analyzer type="query">
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
-        <filter class="solr.StopFilterFactory"
-                ignoreCase="true"
-                words="lang/stopwords_en.txt"
-            />
-        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="0" catenateNumbers="0" catenateAll="0" splitOnCaseChange="1"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.KeywordMarkerFilterFactory" protected="protwords.txt"/>
-        <filter class="solr.PorterStemFilterFactory"/>
-      </analyzer>
-    </fieldType>
-
-    <!-- Less flexible matching, but less false matches.  Probably not ideal for product names,
-         but may be good for SKUs.  Can insert dashes in the wrong place and still match. -->
-    <fieldType name="text_en_splitting_tight" class="solr.TextField" positionIncrementGap="100" autoGeneratePhraseQueries="true">
-      <analyzer>
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="false"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_en.txt"/>
-        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="0" generateNumberParts="0" catenateWords="1" catenateNumbers="1" catenateAll="0"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.KeywordMarkerFilterFactory" protected="protwords.txt"/>
-        <filter class="solr.EnglishMinimalStemFilterFactory"/>
-        <!-- this filter can remove any duplicate tokens that appear at the same position - sometimes
-             possible with WordDelimiterFilter in conjuncton with stemming. -->
-        <filter class="solr.RemoveDuplicatesTokenFilterFactory"/>
-      </analyzer>
-    </fieldType>
-
-    <!-- Just like text_general except it reverses the characters of
-        each token, to enable more efficient leading wildcard queries. -->
-    <fieldType name="text_general_rev" class="solr.TextField" positionIncrementGap="100">
-      <analyzer type="index">
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" />
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.ReversedWildcardFilterFactory" withOriginal="true"
-                maxPosAsterisk="3" maxPosQuestion="2" maxFractionAsterisk="0.33"/>
-      </analyzer>
-      <analyzer type="query">
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" />
-        <filter class="solr.LowerCaseFilterFactory"/>
-      </analyzer>
-    </fieldType>
-
-    <!-- charFilter + WhitespaceTokenizer  -->
-    <!--
-    <fieldType name="text_char_norm" class="solr.TextField" positionIncrementGap="100" >
-      <analyzer>
-        <charFilter class="solr.MappingCharFilterFactory" mapping="mapping-ISOLatin1Accent.txt"/>
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-      </analyzer>
-    </fieldType>
-    -->
-
-    <!-- This is an example of using the KeywordTokenizer along
-         With various TokenFilterFactories to produce a sortable field
-         that does not include some properties of the source text
-      -->
-    <fieldType name="alphaOnlySort" class="solr.TextField" sortMissingLast="true" omitNorms="true">
-      <analyzer>
-        <!-- KeywordTokenizer does no actual tokenizing, so the entire
-             input string is preserved as a single token
-          -->
-        <tokenizer class="solr.KeywordTokenizerFactory"/>
-        <!-- The LowerCase TokenFilter does what you expect, which can be
-             when you want your sorting to be case insensitive
-          -->
-        <filter class="solr.LowerCaseFilterFactory" />
-        <!-- The TrimFilter removes any leading or trailing whitespace -->
-        <filter class="solr.TrimFilterFactory" />
-        <!-- The PatternReplaceFilter gives you the flexibility to use
-             Java Regular expression to replace any sequence of characters
-             matching a pattern with an arbitrary replacement string, 
-             which may include back references to portions of the original
-             string matched by the pattern.
-             
-             See the Java Regular Expression documentation for more
-             information on pattern and replacement string syntax.
-             
-             http://docs.oracle.com/javase/7/docs/api/java/util/regex/package-summary.html
-          -->
-        <filter class="solr.PatternReplaceFilterFactory"
-                pattern="([^a-z])" replacement="" replace="all"
-            />
-      </analyzer>
-    </fieldType>
-    
-    <fieldtype name="phonetic" stored="false" indexed="true" class="solr.TextField" >
-      <analyzer>
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.DoubleMetaphoneFilterFactory" inject="false"/>
-      </analyzer>
-    </fieldtype>
-
-    <fieldtype name="payloads" stored="false" indexed="true" class="solr.TextField" >
-      <analyzer>
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <!--
-        The DelimitedPayloadTokenFilter can put payloads on tokens... for example,
-        a token of "foo|1.4"  would be indexed as "foo" with a payload of 1.4f
-        Attributes of the DelimitedPayloadTokenFilterFactory : 
-         "delimiter" - a one character delimiter. Default is | (pipe)
-        "encoder" - how to encode the following value into a playload
-           float -> org.apache.lucene.analysis.payloads.FloatEncoder,
-           integer -> o.a.l.a.p.IntegerEncoder
-           identity -> o.a.l.a.p.IdentityEncoder
-            Fully Qualified class name implementing PayloadEncoder, Encoder must have a no arg constructor.
-         -->
-        <filter class="solr.DelimitedPayloadTokenFilterFactory" encoder="float"/>
-      </analyzer>
-    </fieldtype>
-
-    <!-- lowercases the entire field value, keeping it as a single token.  -->
-    <fieldType name="lowercase" class="solr.TextField" positionIncrementGap="100">
-      <analyzer>
-        <tokenizer class="solr.KeywordTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory" />
-      </analyzer>
-    </fieldType>
-
-    <!-- 
-      Example of using PathHierarchyTokenizerFactory at index time, so
-      queries for paths match documents at that path, or in descendent paths
-    -->
-    <fieldType name="descendent_path" class="solr.TextField">
-      <analyzer type="index">
-        <tokenizer class="solr.PathHierarchyTokenizerFactory" delimiter="/" />
-      </analyzer>
-      <analyzer type="query">
-        <tokenizer class="solr.KeywordTokenizerFactory" />
-      </analyzer>
-    </fieldType>
-    <!-- 
-      Example of using PathHierarchyTokenizerFactory at query time, so
-      queries for paths match documents at that path, or in ancestor paths
-    -->
-    <fieldType name="ancestor_path" class="solr.TextField">
-      <analyzer type="index">
-        <tokenizer class="solr.KeywordTokenizerFactory" />
-      </analyzer>
-      <analyzer type="query">
-        <tokenizer class="solr.PathHierarchyTokenizerFactory" delimiter="/" />
-      </analyzer>
-    </fieldType>
-
-    <!-- since fields of this type are by default not stored or indexed,
-         any data added to them will be ignored outright.  --> 
-    <fieldtype name="ignored" stored="false" indexed="false" multiValued="true" class="solr.StrField" />
-
-    <!-- This point type indexes the coordinates as separate fields (subFields)
-      If subFieldType is defined, it references a type, and a dynamic field
-      definition is created matching *___<typename>.  Alternately, if 
-      subFieldSuffix is defined, that is used to create the subFields.
-      Example: if subFieldType="double", then the coordinates would be
-        indexed in fields myloc_0___double,myloc_1___double.
-      Example: if subFieldSuffix="_d" then the coordinates would be indexed
-        in fields myloc_0_d,myloc_1_d
-      The subFields are an implementation detail of the fieldType, and end
-      users normally should not need to know about them.
-     -->
-    <fieldType name="point" class="solr.PointType" dimension="2" subFieldSuffix="_d"/>
-
-    <!-- A specialized field for geospatial search. If indexed, this fieldType must not be multivalued. -->
-    <fieldType name="location" class="solr.LatLonType" subFieldSuffix="_coordinate"/>
-
-    <!-- An alternative geospatial field type new to Solr 4.  It supports multiValued and polygon shapes.
-      For more information about this and other Spatial fields new to Solr 4, see:
-      http://wiki.apache.org/solr/SolrAdaptersForLuceneSpatial4
-    -->
-    <fieldType name="location_rpt" class="solr.SpatialRecursivePrefixTreeFieldType"
-               geo="true" distErrPct="0.025" maxDistErr="0.000009" units="degrees" />
-
-    <!-- Money/currency field type. See http://wiki.apache.org/solr/MoneyFieldType
-        Parameters:
-          defaultCurrency: Specifies the default currency if none specified. Defaults to "USD"
-          precisionStep:   Specifies the precisionStep for the TrieLong field used for the amount
-          providerClass:   Lets you plug in other exchange provider backend:
-                           solr.FileExchangeRateProvider is the default and takes one parameter:
-                             currencyConfig: name of an xml file holding exchange rates
-                           solr.OpenExchangeRatesOrgProvider uses rates from openexchangerates.org:
-                             ratesFileLocation: URL or path to rates JSON file (default latest.json on the web)
-                             refreshInterval: Number of minutes between each rates fetch (default: 1440, min: 60)
-   -->
-    <fieldType name="currency" class="solr.CurrencyField" precisionStep="8" defaultCurrency="USD" currencyConfig="currency.xml" />
-             
-
-
-    <!-- some examples for different languages (generally ordered by ISO code) -->
-
-    <!-- Arabic -->
-    <fieldType name="text_ar" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <!-- for any non-arabic -->
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_ar.txt" />
-        <!-- normalizes ﻯ to ﻱ, etc -->
-        <filter class="solr.ArabicNormalizationFilterFactory"/>
-        <filter class="solr.ArabicStemFilterFactory"/>
-      </analyzer>
-    </fieldType>
-
-    <!-- Bulgarian -->
-    <fieldType name="text_bg" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/> 
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_bg.txt" /> 
-        <filter class="solr.BulgarianStemFilterFactory"/>       
-      </analyzer>
-    </fieldType>
-    
-    <!-- Catalan -->
-    <fieldType name="text_ca" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <!-- removes l', etc -->
-        <filter class="solr.ElisionFilterFactory" ignoreCase="true" articles="lang/contractions_ca.txt"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_ca.txt" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Catalan"/>       
-      </analyzer>
-    </fieldType>
-    
-    <!-- CJK bigram (see text_ja for a Japanese configuration using morphological analysis) -->
-    <fieldType name="text_cjk" class="solr.TextField" positionIncrementGap="100">
-      <analyzer>
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <!-- normalize width before bigram, as e.g. half-width dakuten combine  -->
-        <filter class="solr.CJKWidthFilterFactory"/>
-        <!-- for any non-CJK -->
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.CJKBigramFilterFactory"/>
-      </analyzer>
-    </fieldType>
-
-    <!-- Czech -->
-    <fieldType name="text_cz" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_cz.txt" />
-        <filter class="solr.CzechStemFilterFactory"/>       
-      </analyzer>
-    </fieldType>
-    
-    <!-- Danish -->
-    <fieldType name="text_da" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_da.txt" format="snowball" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Danish"/>       
-      </analyzer>
-    </fieldType>
-    
-    <!-- German -->
-    <fieldType name="text_de" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_de.txt" format="snowball" />
-        <filter class="solr.GermanNormalizationFilterFactory"/>
-        <filter class="solr.GermanLightStemFilterFactory"/>
-        <!-- less aggressive: <filter class="solr.GermanMinimalStemFilterFactory"/> -->
-        <!-- more aggressive: <filter class="solr.SnowballPorterFilterFactory" language="German2"/> -->
-      </analyzer>
-    </fieldType>
-    
-    <!-- Greek -->
-    <fieldType name="text_el" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <!-- greek specific lowercase for sigma -->
-        <filter class="solr.GreekLowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="false" words="lang/stopwords_el.txt" />
-        <filter class="solr.GreekStemFilterFactory"/>
-      </analyzer>
-    </fieldType>
-    
-    <!-- Spanish -->
-    <fieldType name="text_es" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_es.txt" format="snowball" />
-        <filter class="solr.SpanishLightStemFilterFactory"/>
-        <!-- more aggressive: <filter class="solr.SnowballPorterFilterFactory" language="Spanish"/> -->
-      </analyzer>
-    </fieldType>
-    
-    <!-- Basque -->
-    <fieldType name="text_eu" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_eu.txt" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Basque"/>
-      </analyzer>
-    </fieldType>
-    
-    <!-- Persian -->
-    <fieldType name="text_fa" class="solr.TextField" positionIncrementGap="100">
-      <analyzer>
-        <!-- for ZWNJ -->
-        <charFilter class="solr.PersianCharFilterFactory"/>
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.ArabicNormalizationFilterFactory"/>
-        <filter class="solr.PersianNormalizationFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_fa.txt" />
-      </analyzer>
-    </fieldType>
-    
-    <!-- Finnish -->
-    <fieldType name="text_fi" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_fi.txt" format="snowball" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Finnish"/>
-        <!-- less aggressive: <filter class="solr.FinnishLightStemFilterFactory"/> -->
-      </analyzer>
-    </fieldType>
-    
-    <!-- French -->
-    <fieldType name="text_fr" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <!-- removes l', etc -->
-        <filter class="solr.ElisionFilterFactory" ignoreCase="true" articles="lang/contractions_fr.txt"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_fr.txt" format="snowball" />
-        <filter class="solr.FrenchLightStemFilterFactory"/>
-        <!-- less aggressive: <filter class="solr.FrenchMinimalStemFilterFactory"/> -->
-        <!-- more aggressive: <filter class="solr.SnowballPorterFilterFactory" language="French"/> -->
-      </analyzer>
-    </fieldType>
-    
-    <!-- Irish -->
-    <fieldType name="text_ga" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <!-- removes d', etc -->
-        <filter class="solr.ElisionFilterFactory" ignoreCase="true" articles="lang/contractions_ga.txt"/>
-        <!-- removes n-, etc. position increments is intentionally false! -->
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/hyphenations_ga.txt"/>
-        <filter class="solr.IrishLowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_ga.txt"/>
-        <filter class="solr.SnowballPorterFilterFactory" language="Irish"/>
-      </analyzer>
-    </fieldType>
-    
-    <!-- Galician -->
-    <fieldType name="text_gl" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_gl.txt" />
-        <filter class="solr.GalicianStemFilterFactory"/>
-        <!-- less aggressive: <filter class="solr.GalicianMinimalStemFilterFactory"/> -->
-      </analyzer>
-    </fieldType>
-    
-    <!-- Hindi -->
-    <fieldType name="text_hi" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <!-- normalizes unicode representation -->
-        <filter class="solr.IndicNormalizationFilterFactory"/>
-        <!-- normalizes variation in spelling -->
-        <filter class="solr.HindiNormalizationFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_hi.txt" />
-        <filter class="solr.HindiStemFilterFactory"/>
-      </analyzer>
-    </fieldType>
-    
-    <!-- Hungarian -->
-    <fieldType name="text_hu" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_hu.txt" format="snowball" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Hungarian"/>
-        <!-- less aggressive: <filter class="solr.HungarianLightStemFilterFactory"/> -->   
-      </analyzer>
-    </fieldType>
-    
-    <!-- Armenian -->
-    <fieldType name="text_hy" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_hy.txt" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Armenian"/>
-      </analyzer>
-    </fieldType>
-    
-    <!-- Indonesian -->
-    <fieldType name="text_id" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_id.txt" />
-        <!-- for a less aggressive approach (only inflectional suffixes), set stemDerivational to false -->
-        <filter class="solr.IndonesianStemFilterFactory" stemDerivational="true"/>
-      </analyzer>
-    </fieldType>
-    
-    <!-- Italian -->
-    <fieldType name="text_it" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <!-- removes l', etc -->
-        <filter class="solr.ElisionFilterFactory" ignoreCase="true" articles="lang/contractions_it.txt"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_it.txt" format="snowball" />
-        <filter class="solr.ItalianLightStemFilterFactory"/>
-        <!-- more aggressive: <filter class="solr.SnowballPorterFilterFactory" language="Italian"/> -->
-      </analyzer>
-    </fieldType>
-    
-    <!-- Japanese using morphological analysis (see text_cjk for a configuration using bigramming)
-
-         NOTE: If you want to optimize search for precision, use default operator AND in your query
-         parser config with <solrQueryParser defaultOperator="AND"/> further down in this file.  Use 
-         OR if you would like to optimize for recall (default).
-    -->
-    <fieldType name="text_ja" class="solr.TextField" positionIncrementGap="100" autoGeneratePhraseQueries="false">
-      <analyzer>
-        <!-- Kuromoji Japanese morphological analyzer/tokenizer (JapaneseTokenizer)
-
-           Kuromoji has a search mode (default) that does segmentation useful for search.  A heuristic
-           is used to segment compounds into its parts and the compound itself is kept as synonym.
-
-           Valid values for attribute mode are:
-              normal: regular segmentation
-              search: segmentation useful for search with synonyms compounds (default)
-            extended: same as search mode, but unigrams unknown words (experimental)
-
-           For some applications it might be good to use search mode for indexing and normal mode for
-           queries to reduce recall and prevent parts of compounds from being matched and highlighted.
-           Use <analyzer type="index"> and <analyzer type="query"> for this and mode normal in query.
-
-           Kuromoji also has a convenient user dictionary feature that allows overriding the statistical
-           model with your own entries for segmentation, part-of-speech tags and readings without a need
-           to specify weights.  Notice that user dictionaries have not been subject to extensive testing.
-
-           User dictionary attributes are:
-                     userDictionary: user dictionary filename
-             userDictionaryEncoding: user dictionary encoding (default is UTF-8)
-
-           See lang/userdict_ja.txt for a sample user dictionary file.
-
-           Punctuation characters are discarded by default.  Use discardPunctuation="false" to keep them.
-
-           See http://wiki.apache.org/solr/JapaneseLanguageSupport for more on Japanese language support.
-        -->
-        <tokenizer class="solr.JapaneseTokenizerFactory" mode="search"/>
-        <!--<tokenizer class="solr.JapaneseTokenizerFactory" mode="search" userDictionary="lang/userdict_ja.txt"/>-->
-        <!-- Reduces inflected verbs and adjectives to their base/dictionary forms (辞書形) -->
-        <filter class="solr.JapaneseBaseFormFilterFactory"/>
-        <!-- Removes tokens with certain part-of-speech tags -->
-        <filter class="solr.JapanesePartOfSpeechStopFilterFactory" tags="lang/stoptags_ja.txt" />
-        <!-- Normalizes full-width romaji to half-width and half-width kana to full-width (Unicode NFKC subset) -->
-        <filter class="solr.CJKWidthFilterFactory"/>
-        <!-- Removes common tokens typically not useful for search, but have a negative effect on ranking -->
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_ja.txt" />
-        <!-- Normalizes common katakana spelling variations by removing any last long sound character (U+30FC) -->
-        <filter class="solr.JapaneseKatakanaStemFilterFactory" minimumLength="4"/>
-        <!-- Lower-cases romaji characters -->
-        <filter class="solr.LowerCaseFilterFactory"/>
-      </analyzer>
-    </fieldType>
-    
-    <!-- Latvian -->
-    <fieldType name="text_lv" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_lv.txt" />
-        <filter class="solr.LatvianStemFilterFactory"/>
-      </analyzer>
-    </fieldType>
-    
-    <!-- Dutch -->
-    <fieldType name="text_nl" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_nl.txt" format="snowball" />
-        <filter class="solr.StemmerOverrideFilterFactory" dictionary="lang/stemdict_nl.txt" ignoreCase="false"/>
-        <filter class="solr.SnowballPorterFilterFactory" language="Dutch"/>
-      </analyzer>
-    </fieldType>
-    
-    <!-- Norwegian -->
-    <fieldType name="text_no" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_no.txt" format="snowball" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Norwegian"/>
-        <!-- less aggressive: <filter class="solr.NorwegianLightStemFilterFactory"/> -->
-        <!-- singular/plural: <filter class="solr.NorwegianMinimalStemFilterFactory"/> -->
-      </analyzer>
-    </fieldType>
-    
-    <!-- Portuguese -->
-    <fieldType name="text_pt" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_pt.txt" format="snowball" />
-        <filter class="solr.PortugueseLightStemFilterFactory"/>
-        <!-- less aggressive: <filter class="solr.PortugueseMinimalStemFilterFactory"/> -->
-        <!-- more aggressive: <filter class="solr.SnowballPorterFilterFactory" language="Portuguese"/> -->
-        <!-- most aggressive: <filter class="solr.PortugueseStemFilterFactory"/> -->
-      </analyzer>
-    </fieldType>
-    
-    <!-- Romanian -->
-    <fieldType name="text_ro" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_ro.txt" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Romanian"/>
-      </analyzer>
-    </fieldType>
-    
-    <!-- Russian -->
-    <fieldType name="text_ru" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_ru.txt" format="snowball" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Russian"/>
-        <!-- less aggressive: <filter class="solr.RussianLightStemFilterFactory"/> -->
-      </analyzer>
-    </fieldType>
-    
-    <!-- Swedish -->
-    <fieldType name="text_sv" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_sv.txt" format="snowball" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Swedish"/>
-        <!-- less aggressive: <filter class="solr.SwedishLightStemFilterFactory"/> -->
-      </analyzer>
-    </fieldType>
-    
-    <!-- Thai -->
-    <fieldType name="text_th" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.ThaiWordFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="lang/stopwords_th.txt" />
-      </analyzer>
-    </fieldType>
-    
-    <!-- Turkish -->
-    <fieldType name="text_tr" class="solr.TextField" positionIncrementGap="100">
-      <analyzer> 
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.TurkishLowerCaseFilterFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="false" words="lang/stopwords_tr.txt" />
-        <filter class="solr.SnowballPorterFilterFactory" language="Turkish"/>
-      </analyzer>
-    </fieldType>
-
-  </types>
-  
-  <!-- Similarity is the scoring routine for each document vs. a query.
-       A custom Similarity or SimilarityFactory may be specified here, but 
-       the default is fine for most applications.  
-       For more info: http://wiki.apache.org/solr/SchemaXml#Similarity
-    -->
-  <!--
-     <similarity class="com.example.solr.CustomSimilarityFactory">
-       <str name="paramkey">param value</str>
-     </similarity>
-    -->
-
-</schema>

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/solrconfig.xml b/zookeeper/example-schemaless/solr/collection1/conf/solrconfig.xml
deleted file mode 100644 (file)
index d9c941f..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/solrconfig.xml
+++ /dev/null
@@ -1,1888 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- 
-     For more details about configurations options that may appear in
-     this file, see http://wiki.apache.org/solr/SolrConfigXml. 
--->
-<config>
-  <!-- In all configuration below, a prefix of "solr." for class names
-       is an alias that causes solr to search appropriate packages,
-       including org.apache.solr.(search|update|request|core|analysis)
-
-       You may also specify a fully qualified Java classname if you
-       have your own custom plugins.
-    -->
-
-  <!-- Controls what version of Lucene various components of Solr
-       adhere to.  Generally, you want to use the latest version to
-       get all bug fixes and improvements. It is highly recommended
-       that you fully re-index after changing this setting as it can
-       affect both how text is indexed and queried.
-  -->
-  <luceneMatchVersion>4.4</luceneMatchVersion>
-
-  <!-- <lib/> directives can be used to instruct Solr to load an Jars
-       identified and use them to resolve any "plugins" specified in
-       your solrconfig.xml or schema.xml (ie: Analyzers, Request
-       Handlers, etc...).
-
-       All directories and paths are resolved relative to the
-       instanceDir.
-
-       Please note that <lib/> directives are processed in the order
-       that they appear in your solrconfig.xml file, and are "stacked" 
-       on top of each other when building a ClassLoader - so if you have 
-       plugin jars with dependencies on other jars, the "lower level" 
-       dependency jars should be loaded first.
-
-       If a "./lib" directory exists in your instanceDir, all files
-       found in it are included as if you had used the following
-       syntax...
-       
-              <lib dir="./lib" />
-    -->
-
-  <!-- A 'dir' option by itself adds any files found in the directory 
-       to the classpath, this is useful for including all jars in a
-       directory.
-
-       When a 'regex' is specified in addition to a 'dir', only the
-       files in that directory which completely match the regex
-       (anchored on both ends) will be included.
-
-       If a 'dir' option (with or without a regex) is used and nothing
-       is found that matches, a warning will be logged.
-
-       The examples below can be used to load some solr-contribs along 
-       with their external dependencies.
-    -->
-  <lib dir="../../../contrib/extraction/lib" regex=".*\.jar" />
-  <lib dir="../../../dist/" regex="solr-cell-\d.*\.jar" />
-
-  <lib dir="../../../contrib/clustering/lib/" regex=".*\.jar" />
-  <lib dir="../../../dist/" regex="solr-clustering-\d.*\.jar" />
-
-  <lib dir="../../../contrib/langid/lib/" regex=".*\.jar" />
-  <lib dir="../../../dist/" regex="solr-langid-\d.*\.jar" />
-
-  <lib dir="../../../contrib/velocity/lib" regex=".*\.jar" />
-  <lib dir="../../../dist/" regex="solr-velocity-\d.*\.jar" />
-
-  <!-- an exact 'path' can be used instead of a 'dir' to specify a 
-       specific jar file.  This will cause a serious error to be logged 
-       if it can't be loaded.
-    -->
-  <!--
-     <lib path="../a-jar-that-does-not-exist.jar" /> 
-  -->
-
-  <!-- Data Directory
-
-       Used to specify an alternate directory to hold all index data
-       other than the default ./data under the Solr home.  If
-       replication is in use, this should match the replication
-       configuration.
-    -->
-  <dataDir>${solr.data.dir:}</dataDir>
-
-
-  <!-- The DirectoryFactory to use for indexes.
-       
-       solr.StandardDirectoryFactory is filesystem
-       based and tries to pick the best implementation for the current
-       JVM and platform.  solr.NRTCachingDirectoryFactory, the default,
-       wraps solr.StandardDirectoryFactory and caches small files in memory
-       for better NRT performance.
-
-       One can force a particular implementation via solr.MMapDirectoryFactory,
-       solr.NIOFSDirectoryFactory, or solr.SimpleFSDirectoryFactory.
-
-       solr.RAMDirectoryFactory is memory based, not
-       persistent, and doesn't work with replication.
-    -->
-  <directoryFactory name="DirectoryFactory"
-                    class="${solr.directoryFactory:solr.NRTCachingDirectoryFactory}"/>
-
-  <!-- The CodecFactory for defining the format of the inverted index.
-       The default implementation is SchemaCodecFactory, which is the official Lucene
-       index format, but hooks into the schema to provide per-field customization of
-       the postings lists and per-document values in the fieldType element
-       (postingsFormat/docValuesFormat). Note that most of the alternative implementations
-       are experimental, so if you choose to customize the index format, its a good
-       idea to convert back to the official format e.g. via IndexWriter.addIndexes(IndexReader)
-       before upgrading to a newer version to avoid unnecessary reindexing.
-  -->
-  <codecFactory class="solr.SchemaCodecFactory"/>
-
-  <!-- To disable dynamic schema REST APIs, use the following for <schemaFactory>:
-  
-       <schemaFactory class="ClassicIndexSchemaFactory"/>
-
-       When ManagedIndexSchemaFactory is specified instead, Solr will load the schema from
-       he resource named in 'managedSchemaResourceName', rather than from schema.xml.
-       Note that the managed schema resource CANNOT be named schema.xml.  If the managed
-       schema does not exist, Solr will create it after reading schema.xml, then rename
-       'schema.xml' to 'schema.xml.bak'. 
-       
-       Do NOT hand edit the managed schema - external modifications will be ignored and
-       overwritten as a result of schema modification REST API calls.
-
-       When ManagedIndexSchemaFactory is specified with mutable = true, schema
-       modification REST API calls will be allowed; otherwise, error responses will be
-       sent back for these requests. 
-  -->
-  <schemaFactory class="ManagedIndexSchemaFactory">
-    <bool name="mutable">true</bool>
-    <str name="managedSchemaResourceName">managed-schema</str>
-  </schemaFactory>
-
-  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-       Index Config - These settings control low-level behavior of indexing
-       Most example settings here show the default value, but are commented
-       out, to more easily see where customizations have been made.
-       
-       Note: This replaces <indexDefaults> and <mainIndex> from older versions
-       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
-  <indexConfig>
-    <!-- maxFieldLength was removed in 4.0. To get similar behavior, include a 
-         LimitTokenCountFilterFactory in your fieldType definition. E.g. 
-     <filter class="solr.LimitTokenCountFilterFactory" maxTokenCount="10000"/>
-    -->
-    <!-- Maximum time to wait for a write lock (ms) for an IndexWriter. Default: 1000 -->
-    <!-- <writeLockTimeout>1000</writeLockTimeout>  -->
-
-    <!-- The maximum number of simultaneous threads that may be
-         indexing documents at once in IndexWriter; if more than this
-         many threads arrive they will wait for others to finish.
-         Default in Solr/Lucene is 8. -->
-    <!-- <maxIndexingThreads>8</maxIndexingThreads>  -->
-
-    <!-- Expert: Enabling compound file will use less files for the index, 
-         using fewer file descriptors on the expense of performance decrease. 
-         Default in Lucene is "true". Default in Solr is "false" (since 3.6) -->
-    <!-- <useCompoundFile>false</useCompoundFile> -->
-
-    <!-- ramBufferSizeMB sets the amount of RAM that may be used by Lucene
-         indexing for buffering added documents and deletions before they are
-         flushed to the Directory.
-         maxBufferedDocs sets a limit on the number of documents buffered
-         before flushing.
-         If both ramBufferSizeMB and maxBufferedDocs is set, then
-         Lucene will flush based on whichever limit is hit first.  -->
-    <!-- <ramBufferSizeMB>100</ramBufferSizeMB> -->
-    <!-- <maxBufferedDocs>1000</maxBufferedDocs> -->
-
-    <!-- Expert: Merge Policy 
-         The Merge Policy in Lucene controls how merging of segments is done.
-         The default since Solr/Lucene 3.3 is TieredMergePolicy.
-         The default since Lucene 2.3 was the LogByteSizeMergePolicy,
-         Even older versions of Lucene used LogDocMergePolicy.
-      -->
-    <!--
-        <mergePolicy class="org.apache.lucene.index.TieredMergePolicy">
-          <int name="maxMergeAtOnce">10</int>
-          <int name="segmentsPerTier">10</int>
-        </mergePolicy>
-      -->
-
-    <!-- Merge Factor
-         The merge factor controls how many segments will get merged at a time.
-         For TieredMergePolicy, mergeFactor is a convenience parameter which
-         will set both MaxMergeAtOnce and SegmentsPerTier at once.
-         For LogByteSizeMergePolicy, mergeFactor decides how many new segments
-         will be allowed before they are merged into one.
-         Default is 10 for both merge policies.
-      -->
-    <!-- 
-    <mergeFactor>10</mergeFactor>
-      -->
-
-    <!-- Expert: Merge Scheduler
-         The Merge Scheduler in Lucene controls how merges are
-         performed.  The ConcurrentMergeScheduler (Lucene 2.3 default)
-         can perform merges in the background using separate threads.
-         The SerialMergeScheduler (Lucene 2.2 default) does not.
-     -->
-    <!-- 
-       <mergeScheduler class="org.apache.lucene.index.ConcurrentMergeScheduler"/>
-       -->
-
-    <!-- LockFactory 
-
-         This option specifies which Lucene LockFactory implementation
-         to use.
-      
-         single = SingleInstanceLockFactory - suggested for a
-                  read-only index or when there is no possibility of
-                  another process trying to modify the index.
-         native = NativeFSLockFactory - uses OS native file locking.
-                  Do not use when multiple solr webapps in the same
-                  JVM are attempting to share a single index.
-         simple = SimpleFSLockFactory  - uses a plain file for locking
-
-         Defaults: 'native' is default for Solr3.6 and later, otherwise
-                   'simple' is the default
-
-         More details on the nuances of each LockFactory...
-         http://wiki.apache.org/lucene-java/AvailableLockFactories
-    -->
-    <lockType>${solr.lock.type:native}</lockType>
-
-    <!-- Unlock On Startup
-
-         If true, unlock any held write or commit locks on startup.
-         This defeats the locking mechanism that allows multiple
-         processes to safely access a lucene index, and should be used
-         with care. Default is "false".
-
-         This is not needed if lock type is 'single'
-     -->
-    <!--
-    <unlockOnStartup>false</unlockOnStartup>
-      -->
-
-    <!-- Expert: Controls how often Lucene loads terms into memory
-         Default is 128 and is likely good for most everyone.
-      -->
-    <!-- <termIndexInterval>128</termIndexInterval> -->
-
-    <!-- If true, IndexReaders will be reopened (often more efficient)
-         instead of closed and then opened. Default: true
-      -->
-    <!-- 
-    <reopenReaders>true</reopenReaders>
-      -->
-
-    <!-- Commit Deletion Policy
-         Custom deletion policies can be specified here. The class must
-         implement org.apache.lucene.index.IndexDeletionPolicy.
-
-         The default Solr IndexDeletionPolicy implementation supports
-         deleting index commit points on number of commits, age of
-         commit point and optimized status.
-         
-         The latest commit point should always be preserved regardless
-         of the criteria.
-    -->
-    <!-- 
-    <deletionPolicy class="solr.SolrDeletionPolicy">
-    -->
-    <!-- The number of commit points to be kept -->
-    <!-- <str name="maxCommitsToKeep">1</str> -->
-    <!-- The number of optimized commit points to be kept -->
-    <!-- <str name="maxOptimizedCommitsToKeep">0</str> -->
-    <!--
-        Delete all commit points once they have reached the given age.
-        Supports DateMathParser syntax e.g.
-      -->
-    <!--
-       <str name="maxCommitAge">30MINUTES</str>
-       <str name="maxCommitAge">1DAY</str>
-    -->
-    <!-- 
-    </deletionPolicy>
-    -->
-
-    <!-- Lucene Infostream
-       
-         To aid in advanced debugging, Lucene provides an "InfoStream"
-         of detailed information when indexing.
-
-         Setting The value to true will instruct the underlying Lucene
-         IndexWriter to write its debugging info the specified file
-      -->
-    <!-- <infoStream file="INFOSTREAM.txt">false</infoStream> -->
-  </indexConfig>
-
-
-  <!-- JMX
-       
-       This example enables JMX if and only if an existing MBeanServer
-       is found, use this if you want to configure JMX through JVM
-       parameters. Remove this to disable exposing Solr configuration
-       and statistics to JMX.
-
-       For more details see http://wiki.apache.org/solr/SolrJmx
-    -->
-  <jmx />
-  <!-- If you want to connect to a particular server, specify the
-       agentId 
-    -->
-  <!-- <jmx agentId="myAgent" /> -->
-  <!-- If you want to start a new MBeanServer, specify the serviceUrl -->
-  <!-- <jmx serviceUrl="service:jmx:rmi:///jndi/rmi://localhost:9999/solr"/>
-    -->
-
-  <!-- The default high-performance update handler -->
-  <updateHandler class="solr.DirectUpdateHandler2">
-
-    <!-- Enables a transaction log, used for real-time get, durability, and
-         and solr cloud replica recovery.  The log can grow as big as
-         uncommitted changes to the index, so use of a hard autoCommit
-         is recommended (see below).
-         "dir" - the target directory for transaction logs, defaults to the
-                solr data directory.  -->
-    <updateLog>
-      <str name="dir">${solr.ulog.dir:}</str>
-    </updateLog>
-
-    <!-- AutoCommit
-
-         Perform a hard commit automatically under certain conditions.
-         Instead of enabling autoCommit, consider using "commitWithin"
-         when adding documents. 
-
-         http://wiki.apache.org/solr/UpdateXmlMessages
-
-         maxDocs - Maximum number of documents to add since the last
-                   commit before automatically triggering a new commit.
-
-         maxTime - Maximum amount of time in ms that is allowed to pass
-                   since a document was added before automatically
-                   triggering a new commit. 
-         openSearcher - if false, the commit causes recent index changes
-           to be flushed to stable storage, but does not cause a new
-           searcher to be opened to make those changes visible.
-
-         If the updateLog is enabled, then it's highly recommended to
-         have some sort of hard autoCommit to limit the log size.
-      -->
-    <autoCommit>
-      <maxTime>15000</maxTime>
-      <openSearcher>false</openSearcher>
-    </autoCommit>
-
-    <!-- softAutoCommit is like autoCommit except it causes a
-         'soft' commit which only ensures that changes are visible
-         but does not ensure that data is synced to disk.  This is
-         faster and more near-realtime friendly than a hard commit.
-      -->
-    <!--
-      <autoSoftCommit> 
-        <maxTime>1000</maxTime> 
-      </autoSoftCommit>
-     -->
-
-    <!-- Update Related Event Listeners
-         
-         Various IndexWriter related events can trigger Listeners to
-         take actions.
-
-         postCommit - fired after every commit or optimize command
-         postOptimize - fired after every optimize command
-      -->
-    <!-- The RunExecutableListener executes an external command from a
-         hook such as postCommit or postOptimize.
-         
-         exe - the name of the executable to run
-         dir - dir to use as the current working directory. (default=".")
-         wait - the calling thread waits until the executable returns. 
-                (default="true")
-         args - the arguments to pass to the program.  (default is none)
-         env - environment variables to set.  (default is none)
-      -->
-    <!-- This example shows how RunExecutableListener could be used
-         with the script based replication...
-         http://wiki.apache.org/solr/CollectionDistribution
-      -->
-    <!--
-       <listener event="postCommit" class="solr.RunExecutableListener">
-         <str name="exe">solr/bin/snapshooter</str>
-         <str name="dir">.</str>
-         <bool name="wait">true</bool>
-         <arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
-         <arr name="env"> <str>MYVAR=val1</str> </arr>
-       </listener>
-      -->
-
-  </updateHandler>
-
-  <!-- IndexReaderFactory
-
-       Use the following format to specify a custom IndexReaderFactory,
-       which allows for alternate IndexReader implementations.
-
-       ** Experimental Feature **
-
-       Please note - Using a custom IndexReaderFactory may prevent
-       certain other features from working. The API to
-       IndexReaderFactory may change without warning or may even be
-       removed from future releases if the problems cannot be
-       resolved.
-
-
-       ** Features that may not work with custom IndexReaderFactory **
-
-       The ReplicationHandler assumes a disk-resident index. Using a
-       custom IndexReader implementation may cause incompatibility
-       with ReplicationHandler and may cause replication to not work
-       correctly. See SOLR-1366 for details.
-
-    -->
-  <!--
-  <indexReaderFactory name="IndexReaderFactory" class="package.class">
-    <str name="someArg">Some Value</str>
-  </indexReaderFactory >
-  -->
-  <!-- By explicitly declaring the Factory, the termIndexDivisor can
-       be specified.
-    -->
-  <!--
-     <indexReaderFactory name="IndexReaderFactory" 
-                         class="solr.StandardIndexReaderFactory">
-       <int name="setTermIndexDivisor">12</int>
-     </indexReaderFactory >
-    -->
-
-  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-       Query section - these settings control query time things like caches
-       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
-  <query>
-    <!-- Max Boolean Clauses
-
-         Maximum number of clauses in each BooleanQuery,  an exception
-         is thrown if exceeded.
-
-         ** WARNING **
-         
-         This option actually modifies a global Lucene property that
-         will affect all SolrCores.  If multiple solrconfig.xml files
-         disagree on this property, the value at any given moment will
-         be based on the last SolrCore to be initialized.
-         
-      -->
-    <maxBooleanClauses>1024</maxBooleanClauses>
-
-
-    <!-- Solr Internal Query Caches
-
-         There are two implementations of cache available for Solr,
-         LRUCache, based on a synchronized LinkedHashMap, and
-         FastLRUCache, based on a ConcurrentHashMap.  
-
-         FastLRUCache has faster gets and slower puts in single
-         threaded operation and thus is generally faster than LRUCache
-         when the hit ratio of the cache is high (> 75%), and may be
-         faster under other scenarios on multi-cpu systems.
-    -->
-
-    <!-- Filter Cache
-
-         Cache used by SolrIndexSearcher for filters (DocSets),
-         unordered sets of *all* documents that match a query.  When a
-         new searcher is opened, its caches may be prepopulated or
-         "autowarmed" using data from caches in the old searcher.
-         autowarmCount is the number of items to prepopulate.  For
-         LRUCache, the autowarmed items will be the most recently
-         accessed items.
-
-         Parameters:
-           class - the SolrCache implementation LRUCache or
-               (LRUCache or FastLRUCache)
-           size - the maximum number of entries in the cache
-           initialSize - the initial capacity (number of entries) of
-               the cache.  (see java.util.HashMap)
-           autowarmCount - the number of entries to prepopulate from
-               and old cache.  
-      -->
-    <filterCache class="solr.FastLRUCache"
-                 size="512"
-                 initialSize="512"
-                 autowarmCount="0"/>
-
-    <!-- Query Result Cache
-         
-         Caches results of searches - ordered lists of document ids
-         (DocList) based on a query, a sort, and the range of documents requested.  
-      -->
-    <queryResultCache class="solr.LRUCache"
-                      size="512"
-                      initialSize="512"
-                      autowarmCount="0"/>
-
-    <!-- Document Cache
-
-         Caches Lucene Document objects (the stored fields for each
-         document).  Since Lucene internal document ids are transient,
-         this cache will not be autowarmed.  
-      -->
-    <documentCache class="solr.LRUCache"
-                   size="512"
-                   initialSize="512"
-                   autowarmCount="0"/>
-
-    <!-- Field Value Cache
-         
-         Cache used to hold field values that are quickly accessible
-         by document id.  The fieldValueCache is created by default
-         even if not configured here.
-      -->
-    <!--
-       <fieldValueCache class="solr.FastLRUCache"
-                        size="512"
-                        autowarmCount="128"
-                        showItems="32" />
-      -->
-
-    <!-- Custom Cache
-
-         Example of a generic cache.  These caches may be accessed by
-         name through SolrIndexSearcher.getCache(),cacheLookup(), and
-         cacheInsert().  The purpose is to enable easy caching of
-         user/application level data.  The regenerator argument should
-         be specified as an implementation of solr.CacheRegenerator 
-         if autowarming is desired.  
-      -->
-    <!--
-       <cache name="myUserCache"
-              class="solr.LRUCache"
-              size="4096"
-              initialSize="1024"
-              autowarmCount="1024"
-              regenerator="com.mycompany.MyRegenerator"
-              />
-      -->
-
-
-    <!-- Lazy Field Loading
-
-         If true, stored fields that are not requested will be loaded
-         lazily.  This can result in a significant speed improvement
-         if the usual case is to not load all stored fields,
-         especially if the skipped fields are large compressed text
-         fields.
-    -->
-    <enableLazyFieldLoading>true</enableLazyFieldLoading>
-
-    <!-- Use Filter For Sorted Query
- 
-         A possible optimization that attempts to use a filter to
-         satisfy a search.  If the requested sort does not include
-         score, then the filterCache will be checked for a filter
-         matching the query. If found, the filter will be used as the
-         source of document ids, and then the sort will be applied to
-         that.
- 
-         For most situations, this will not be useful unless you
-         frequently get the same search repeatedly with different sort
-         options, and none of them ever use "score"
-      -->
-    <!--
-       <useFilterForSortedQuery>true</useFilterForSortedQuery>
-      -->
-
-    <!-- Result Window Size
- 
-         An optimization for use with the queryResultCache.  When a search
-         is requested, a superset of the requested number of document ids
-         are collected.  For example, if a search for a particular query
-         requests matching documents 10 through 19, and queryWindowSize is 50,
-         then documents 0 through 49 will be collected and cached.  Any further
-         requests in that range can be satisfied via the cache.  
-      -->
-    <queryResultWindowSize>20</queryResultWindowSize>
-
-    <!-- Maximum number of documents to cache for any entry in the
-         queryResultCache. 
-      -->
-    <queryResultMaxDocsCached>200</queryResultMaxDocsCached>
-
-    <!-- Query Related Event Listeners
- 
-         Various IndexSearcher related events can trigger Listeners to
-         take actions.
- 
-         newSearcher - fired whenever a new searcher is being prepared
-         and there is a current searcher handling requests (aka
-         registered).  It can be used to prime certain caches to
-         prevent long request times for certain requests.
- 
-         firstSearcher - fired whenever a new searcher is being
-         prepared but there is no current registered searcher to handle
-         requests or to gain autowarming data from.
- 
-         
-      -->
-    <!-- QuerySenderListener takes an array of NamedList and executes a
-         local query request for each NamedList in sequence. 
-      -->
-    <listener event="newSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <!--
-           <lst><str name="q">solr</str><str name="sort">price asc</str></lst>
-           <lst><str name="q">rocks</str><str name="sort">weight asc</str></lst>
-          -->
-      </arr>
-    </listener>
-    <listener event="firstSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <!--
-        <lst>
-          <str name="q">static firstSearcher warming in solrconfig.xml</str>
-        </lst>
-        -->
-      </arr>
-    </listener>
-
-    <!-- Use Cold Searcher
-
-         If a search request comes in and there is no current
-         registered searcher, then immediately register the still
-         warming searcher and use it.  If "false" then all requests
-         will block until the first searcher is done warming.
-      -->
-    <useColdSearcher>false</useColdSearcher>
-
-    <!-- Max Warming Searchers
-         
-         Maximum number of searchers that may be warming in the
-         background concurrently.  An error is returned if this limit
-         is exceeded.
-
-         Recommend values of 1-2 for read-only slaves, higher for
-         masters w/o cache warming.
-      -->
-    <maxWarmingSearchers>2</maxWarmingSearchers>
-
-  </query>
-
-
-  <!-- Request Dispatcher
-
-       This section contains instructions for how the SolrDispatchFilter
-       should behave when processing requests for this SolrCore.
-
-       handleSelect is a legacy option that affects the behavior of requests
-       such as /select?qt=XXX
-
-       handleSelect="true" will cause the SolrDispatchFilter to process
-       the request and dispatch the query to a handler specified by the 
-       "qt" param, assuming "/select" isn't already registered.
-
-       handleSelect="false" will cause the SolrDispatchFilter to
-       ignore "/select" requests, resulting in a 404 unless a handler
-       is explicitly registered with the name "/select"
-
-       handleSelect="true" is not recommended for new users, but is the default
-       for backwards compatibility
-    -->
-  <requestDispatcher handleSelect="false" >
-    <!-- Request Parsing
-
-         These settings indicate how Solr Requests may be parsed, and
-         what restrictions may be placed on the ContentStreams from
-         those requests
-
-         enableRemoteStreaming - enables use of the stream.file
-         and stream.url parameters for specifying remote streams.
-
-         multipartUploadLimitInKB - specifies the max size (in KiB) of
-         Multipart File Uploads that Solr will allow in a Request.
-         
-         formdataUploadLimitInKB - specifies the max size (in KiB) of
-         form data (application/x-www-form-urlencoded) sent via
-         POST. You can use POST to pass request parameters not
-         fitting into the URL.
-         
-         addHttpRequestToContext - if set to true, it will instruct
-         the requestParsers to include the original HttpServletRequest
-         object in the context map of the SolrQueryRequest under the 
-         key "httpRequest". It will not be used by any of the existing
-         Solr components, but may be useful when developing custom 
-         plugins.
-         
-         *** WARNING ***
-         The settings below authorize Solr to fetch remote files, You
-         should make sure your system has some authentication before
-         using enableRemoteStreaming="true"
-
-      -->
-    <requestParsers enableRemoteStreaming="true"
-                    multipartUploadLimitInKB="2048000"
-                    formdataUploadLimitInKB="2048"
-                    addHttpRequestToContext="false"/>
-
-    <!-- HTTP Caching
-
-         Set HTTP caching related parameters (for proxy caches and clients).
-
-         The options below instruct Solr not to output any HTTP Caching
-         related headers
-      -->
-    <httpCaching never304="true" />
-    <!-- If you include a <cacheControl> directive, it will be used to
-         generate a Cache-Control header (as well as an Expires header
-         if the value contains "max-age=")
-         
-         By default, no Cache-Control header is generated.
-         
-         You can use the <cacheControl> option even if you have set
-         never304="true"
-      -->
-    <!--
-       <httpCaching never304="true" >
-         <cacheControl>max-age=30, public</cacheControl> 
-       </httpCaching>
-      -->
-    <!-- To enable Solr to respond with automatically generated HTTP
-         Caching headers, and to response to Cache Validation requests
-         correctly, set the value of never304="false"
-         
-         This will cause Solr to generate Last-Modified and ETag
-         headers based on the properties of the Index.
-
-         The following options can also be specified to affect the
-         values of these headers...
-
-         lastModFrom - the default value is "openTime" which means the
-         Last-Modified value (and validation against If-Modified-Since
-         requests) will all be relative to when the current Searcher
-         was opened.  You can change it to lastModFrom="dirLastMod" if
-         you want the value to exactly correspond to when the physical
-         index was last modified.
-
-         etagSeed="..." is an option you can change to force the ETag
-         header (and validation against If-None-Match requests) to be
-         different even if the index has not changed (ie: when making
-         significant changes to your config file)
-
-         (lastModifiedFrom and etagSeed are both ignored if you use
-         the never304="true" option)
-      -->
-    <!--
-       <httpCaching lastModifiedFrom="openTime"
-                    etagSeed="Solr">
-         <cacheControl>max-age=30, public</cacheControl> 
-       </httpCaching>
-      -->
-  </requestDispatcher>
-
-  <!-- Request Handlers 
-
-       http://wiki.apache.org/solr/SolrRequestHandler
-
-       Incoming queries will be dispatched to a specific handler by name
-       based on the path specified in the request.
-
-       Legacy behavior: If the request path uses "/select" but no Request
-       Handler has that name, and if handleSelect="true" has been specified in
-       the requestDispatcher, then the Request Handler is dispatched based on
-       the qt parameter.  Handlers without a leading '/' are accessed this way
-       like so: http://host/app/[core/]select?qt=name  If no qt is
-       given, then the requestHandler that declares default="true" will be
-       used or the one named "standard".
-
-       If a Request Handler is declared with startup="lazy", then it will
-       not be initialized until the first request that uses it.
-
-    -->
-  <!-- SearchHandler
-
-       http://wiki.apache.org/solr/SearchHandler
-
-       For processing Search Queries, the primary Request Handler
-       provided with Solr is "SearchHandler" It delegates to a sequent
-       of SearchComponents (see below) and supports distributed
-       queries across multiple shards
-    -->
-  <requestHandler name="/select" class="solr.SearchHandler">
-    <!-- default values for query parameters can be specified, these
-         will be overridden by parameters in the request
-      -->
-    <lst name="defaults">
-      <str name="echoParams">explicit</str>
-      <int name="rows">10</int>
-      <!-- <str name="df">text</str> -->
-    </lst>
-    <!-- In addition to defaults, "appends" params can be specified
-         to identify values which should be appended to the list of
-         multi-val params from the query (or the existing "defaults").
-      -->
-    <!-- In this example, the param "fq=instock:true" would be appended to
-         any query time fq params the user may specify, as a mechanism for
-         partitioning the index, independent of any user selected filtering
-         that may also be desired (perhaps as a result of faceted searching).
-
-         NOTE: there is *absolutely* nothing a client can do to prevent these
-         "appends" values from being used, so don't use this mechanism
-         unless you are sure you always want it.
-      -->
-    <!--
-       <lst name="appends">
-         <str name="fq">inStock:true</str>
-       </lst>
-      -->
-    <!-- "invariants" are a way of letting the Solr maintainer lock down
-         the options available to Solr clients.  Any params values
-         specified here are used regardless of what values may be specified
-         in either the query, the "defaults", or the "appends" params.
-
-         In this example, the facet.field and facet.query params would
-         be fixed, limiting the facets clients can use.  Faceting is
-         not turned on by default - but if the client does specify
-         facet=true in the request, these are the only facets they
-         will be able to see counts for; regardless of what other
-         facet.field or facet.query params they may specify.
-
-         NOTE: there is *absolutely* nothing a client can do to prevent these
-         "invariants" values from being used, so don't use this mechanism
-         unless you are sure you always want it.
-      -->
-    <!--
-       <lst name="invariants">
-         <str name="facet.field">cat</str>
-         <str name="facet.field">manu_exact</str>
-         <str name="facet.query">price:[* TO 500]</str>
-         <str name="facet.query">price:[500 TO *]</str>
-       </lst>
-      -->
-    <!-- If the default list of SearchComponents is not desired, that
-         list can either be overridden completely, or components can be
-         prepended or appended to the default list.  (see below)
-      -->
-    <!--
-       <arr name="components">
-         <str>nameOfCustomComponent1</str>
-         <str>nameOfCustomComponent2</str>
-       </arr>
-      -->
-  </requestHandler>
-
-  <!-- A request handler that returns indented JSON by default -->
-  <requestHandler name="/query" class="solr.SearchHandler">
-    <lst name="defaults">
-      <str name="echoParams">explicit</str>
-      <str name="wt">json</str>
-      <str name="indent">true</str>
-      <str name="df">text</str>
-    </lst>
-  </requestHandler>
-
-
-  <!-- realtime get handler, guaranteed to return the latest stored fields of
-       any document, without the need to commit or open a new searcher.  The
-       current implementation relies on the updateLog feature being enabled. -->
-  <requestHandler name="/get" class="solr.RealTimeGetHandler">
-    <lst name="defaults">
-      <str name="omitHeader">true</str>
-      <str name="wt">json</str>
-      <str name="indent">true</str>
-    </lst>
-  </requestHandler>
-
-
-  <!-- A Robust Example 
-       
-       This example SearchHandler declaration shows off usage of the
-       SearchHandler with many defaults declared
-
-       Note that multiple instances of the same Request Handler
-       (SearchHandler) can be registered multiple times with different
-       names (and different init parameters)
-    -->
-  <requestHandler name="/browse" class="solr.SearchHandler">
-    <lst name="defaults">
-      <str name="echoParams">explicit</str>
-
-      <!-- VelocityResponseWriter settings -->
-      <str name="wt">velocity</str>
-      <str name="v.template">browse</str>
-      <str name="v.layout">layout</str>
-      <str name="title">Solritas</str>
-
-      <!-- Query settings -->
-      <str name="defType">edismax</str>
-      <str name="qf">
-        text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
-        title^10.0 description^5.0 keywords^5.0 author^2.0 resourcename^1.0
-      </str>
-      <str name="df">text</str>
-      <str name="mm">100%</str>
-      <str name="q.alt">*:*</str>
-      <str name="rows">10</str>
-      <str name="fl">*,score</str>
-
-      <str name="mlt.qf">
-        text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
-        title^10.0 description^5.0 keywords^5.0 author^2.0 resourcename^1.0
-      </str>
-      <str name="mlt.fl">text,features,name,sku,id,manu,cat,title,description,keywords,author,resourcename</str>
-      <int name="mlt.count">3</int>
-
-      <!-- Faceting defaults -->
-      <str name="facet">on</str>
-      <str name="facet.field">cat</str>
-      <str name="facet.field">manu_exact</str>
-      <str name="facet.field">content_type</str>
-      <str name="facet.field">author_s</str>
-      <str name="facet.query">ipod</str>
-      <str name="facet.query">GB</str>
-      <str name="facet.mincount">1</str>
-      <str name="facet.pivot">cat,inStock</str>
-      <str name="facet.range.other">after</str>
-      <str name="facet.range">price</str>
-      <int name="f.price.facet.range.start">0</int>
-      <int name="f.price.facet.range.end">600</int>
-      <int name="f.price.facet.range.gap">50</int>
-      <str name="facet.range">popularity</str>
-      <int name="f.popularity.facet.range.start">0</int>
-      <int name="f.popularity.facet.range.end">10</int>
-      <int name="f.popularity.facet.range.gap">3</int>
-      <str name="facet.range">manufacturedate_dt</str>
-      <str name="f.manufacturedate_dt.facet.range.start">NOW/YEAR-10YEARS</str>
-      <str name="f.manufacturedate_dt.facet.range.end">NOW</str>
-      <str name="f.manufacturedate_dt.facet.range.gap">+1YEAR</str>
-      <str name="f.manufacturedate_dt.facet.range.other">before</str>
-      <str name="f.manufacturedate_dt.facet.range.other">after</str>
-
-      <!-- Highlighting defaults -->
-      <str name="hl">on</str>
-      <str name="hl.fl">content features title name</str>
-      <str name="hl.encoder">html</str>
-      <str name="hl.simple.pre">&lt;b&gt;</str>
-      <str name="hl.simple.post">&lt;/b&gt;</str>
-      <str name="f.title.hl.fragsize">0</str>
-      <str name="f.title.hl.alternateField">title</str>
-      <str name="f.name.hl.fragsize">0</str>
-      <str name="f.name.hl.alternateField">name</str>
-      <str name="f.content.hl.snippets">3</str>
-      <str name="f.content.hl.fragsize">200</str>
-      <str name="f.content.hl.alternateField">content</str>
-      <str name="f.content.hl.maxAlternateFieldLength">750</str>
-
-      <!-- Spell checking defaults -->
-      <str name="spellcheck">on</str>
-      <str name="spellcheck.extendedResults">false</str>
-      <str name="spellcheck.count">5</str>
-      <str name="spellcheck.alternativeTermCount">2</str>
-      <str name="spellcheck.maxResultsForSuggest">5</str>
-      <str name="spellcheck.collate">true</str>
-      <str name="spellcheck.collateExtendedResults">true</str>
-      <str name="spellcheck.maxCollationTries">5</str>
-      <str name="spellcheck.maxCollations">3</str>
-    </lst>
-
-    <!-- append spellchecking to our list of components -->
-    <arr name="last-components">
-      <str>spellcheck</str>
-    </arr>
-  </requestHandler>
-
-
-  <!-- Update Request Handler.  
-       
-       http://wiki.apache.org/solr/UpdateXmlMessages
-
-       The canonical Request Handler for Modifying the Index through
-       commands specified using XML, JSON, CSV, or JAVABIN
-
-       Note: Since solr1.1 requestHandlers requires a valid content
-       type header if posted in the body. For example, curl now
-       requires: -H 'Content-type:text/xml; charset=utf-8'
-       
-       To override the request content type and force a specific 
-       Content-type, use the request parameter: 
-         ?update.contentType=text/csv
-       
-       This handler will pick a response format to match the input
-       if the 'wt' parameter is not explicit
-    -->
-  <requestHandler name="/update" class="solr.UpdateRequestHandler">
-    <!-- See below for information on defining 
-         updateRequestProcessorChains that can be used by name 
-         on each Update Request
-      -->
-    <lst name="defaults">
-      <str name="update.chain">add-unknown-fields-to-the-schema</str>
-    </lst>
-  </requestHandler>
-
-  <!-- for back compat with clients using /update/json and /update/csv -->
-  <requestHandler name="/update/json" class="solr.JsonUpdateRequestHandler">
-    <lst name="defaults">
-      <str name="stream.contentType">application/json</str>
-      <str name="update.chain">add-unknown-fields-to-the-schema</str>
-    </lst>
-  </requestHandler>
-  <requestHandler name="/update/csv" class="solr.CSVRequestHandler">
-    <lst name="defaults">
-      <str name="stream.contentType">application/csv</str>
-      <str name="update.chain">add-unknown-fields-to-the-schema</str>
-    </lst>
-  </requestHandler>
-
-  <!-- Solr Cell Update Request Handler
-
-       http://wiki.apache.org/solr/ExtractingRequestHandler 
-
-    -->
-  <requestHandler name="/update/extract"
-                  startup="lazy"
-                  class="solr.extraction.ExtractingRequestHandler" >
-    <lst name="defaults">
-      <str name="lowernames">true</str>
-      <str name="uprefix">ignored_</str>
-
-      <!-- capture link hrefs but ignore div attributes -->
-      <str name="captureAttr">true</str>
-      <str name="fmap.a">links</str>
-      <str name="fmap.div">ignored_</str>
-    </lst>
-  </requestHandler>
-
-
-  <!-- Field Analysis Request Handler
-
-       RequestHandler that provides much the same functionality as
-       analysis.jsp. Provides the ability to specify multiple field
-       types and field names in the same request and outputs
-       index-time and query-time analysis for each of them.
-
-       Request parameters are:
-       analysis.fieldname - field name whose analyzers are to be used
-
-       analysis.fieldtype - field type whose analyzers are to be used
-       analysis.fieldvalue - text for index-time analysis
-       q (or analysis.q) - text for query time analysis
-       analysis.showmatch (true|false) - When set to true and when
-           query analysis is performed, the produced tokens of the
-           field value analysis will be marked as "matched" for every
-           token that is produces by the query analysis
-   -->
-  <requestHandler name="/analysis/field"
-                  startup="lazy"
-                  class="solr.FieldAnalysisRequestHandler" />
-
-
-  <!-- Document Analysis Handler
-
-       http://wiki.apache.org/solr/AnalysisRequestHandler
-
-       An analysis handler that provides a breakdown of the analysis
-       process of provided documents. This handler expects a (single)
-       content stream with the following format:
-
-       <docs>
-         <doc>
-           <field name="id">1</field>
-           <field name="name">The Name</field>
-           <field name="text">The Text Value</field>
-         </doc>
-         <doc>...</doc>
-         <doc>...</doc>
-         ...
-       </docs>
-
-    Note: Each document must contain a field which serves as the
-    unique key. This key is used in the returned response to associate
-    an analysis breakdown to the analyzed document.
-
-    Like the FieldAnalysisRequestHandler, this handler also supports
-    query analysis by sending either an "analysis.query" or "q"
-    request parameter that holds the query text to be analyzed. It
-    also supports the "analysis.showmatch" parameter which when set to
-    true, all field tokens that match the query tokens will be marked
-    as a "match". 
-  -->
-  <requestHandler name="/analysis/document"
-                  class="solr.DocumentAnalysisRequestHandler"
-                  startup="lazy" />
-
-  <!-- Admin Handlers
-
-       Admin Handlers - This will register all the standard admin
-       RequestHandlers.  
-    -->
-  <requestHandler name="/admin/"
-                  class="solr.admin.AdminHandlers" />
-  <!-- This single handler is equivalent to the following... -->
-  <!--
-     <requestHandler name="/admin/luke"       class="solr.admin.LukeRequestHandler" />
-     <requestHandler name="/admin/system"     class="solr.admin.SystemInfoHandler" />
-     <requestHandler name="/admin/plugins"    class="solr.admin.PluginInfoHandler" />
-     <requestHandler name="/admin/threads"    class="solr.admin.ThreadDumpHandler" />
-     <requestHandler name="/admin/properties" class="solr.admin.PropertiesRequestHandler" />
-     <requestHandler name="/admin/file"       class="solr.admin.ShowFileRequestHandler" >
-    -->
-  <!-- If you wish to hide files under ${solr.home}/conf, explicitly
-       register the ShowFileRequestHandler using: 
-    -->
-  <!--
-     <requestHandler name="/admin/file" 
-                     class="solr.admin.ShowFileRequestHandler" >
-       <lst name="invariants">
-         <str name="hidden">synonyms.txt</str> 
-         <str name="hidden">anotherfile.txt</str> 
-       </lst>
-     </requestHandler>
-    -->
-
-  <!-- ping/healthcheck -->
-  <requestHandler name="/admin/ping" class="solr.PingRequestHandler">
-    <lst name="invariants">
-      <str name="q">solrpingquery</str>
-    </lst>
-    <lst name="defaults">
-      <str name="echoParams">all</str>
-    </lst>
-    <!-- An optional feature of the PingRequestHandler is to configure the 
-         handler with a "healthcheckFile" which can be used to enable/disable 
-         the PingRequestHandler.
-         relative paths are resolved against the data dir 
-      -->
-    <!-- <str name="healthcheckFile">server-enabled.txt</str> -->
-  </requestHandler>
-
-  <!-- Echo the request contents back to the client -->
-  <requestHandler name="/debug/dump" class="solr.DumpRequestHandler" >
-    <lst name="defaults">
-      <str name="echoParams">explicit</str>
-      <str name="echoHandler">true</str>
-    </lst>
-  </requestHandler>
-
-  <!-- Solr Replication
-
-       The SolrReplicationHandler supports replicating indexes from a
-       "master" used for indexing and "slaves" used for queries.
-
-       http://wiki.apache.org/solr/SolrReplication 
-
-       It is also necessary for SolrCloud to function (in Cloud mode, the
-       replication handler is used to bulk transfer segments when nodes 
-       are added or need to recover).
-
-       https://wiki.apache.org/solr/SolrCloud/
-    -->
-  <requestHandler name="/replication" class="solr.ReplicationHandler" >
-    <!--
-       To enable simple master/slave replication, uncomment one of the 
-       sections below, depending on whether this solr instance should be
-       the "master" or a "slave".  If this instance is a "slave" you will 
-       also need to fill in the masterUrl to point to a real machine.
-    -->
-    <!--
-       <lst name="master">
-         <str name="replicateAfter">commit</str>
-         <str name="replicateAfter">startup</str>
-         <str name="confFiles">schema.xml,stopwords.txt</str>
-       </lst>
-    -->
-    <!--
-       <lst name="slave">
-         <str name="masterUrl">http://your-master-hostname:8983/solr</str>
-         <str name="pollInterval">00:00:60</str>
-       </lst>
-    -->
-  </requestHandler>
-
-  <!-- Search Components
-
-       Search components are registered to SolrCore and used by 
-       instances of SearchHandler (which can access them by name)
-       
-       By default, the following components are available:
-       
-       <searchComponent name="query"     class="solr.QueryComponent" />
-       <searchComponent name="facet"     class="solr.FacetComponent" />
-       <searchComponent name="mlt"       class="solr.MoreLikeThisComponent" />
-       <searchComponent name="highlight" class="solr.HighlightComponent" />
-       <searchComponent name="stats"     class="solr.StatsComponent" />
-       <searchComponent name="debug"     class="solr.DebugComponent" />
-   
-       Default configuration in a requestHandler would look like:
-
-       <arr name="components">
-         <str>query</str>
-         <str>facet</str>
-         <str>mlt</str>
-         <str>highlight</str>
-         <str>stats</str>
-         <str>debug</str>
-       </arr>
-
-       If you register a searchComponent to one of the standard names, 
-       that will be used instead of the default.
-
-       To insert components before or after the 'standard' components, use:
-    
-       <arr name="first-components">
-         <str>myFirstComponentName</str>
-       </arr>
-    
-       <arr name="last-components">
-         <str>myLastComponentName</str>
-       </arr>
-
-       NOTE: The component registered with the name "debug" will
-       always be executed after the "last-components" 
-       
-     -->
-
-  <!-- Spell Check
-
-       The spell check component can return a list of alternative spelling
-       suggestions.  
-
-       http://wiki.apache.org/solr/SpellCheckComponent
-    -->
-  <searchComponent name="spellcheck" class="solr.SpellCheckComponent">
-
-    <str name="queryAnalyzerFieldType">text_general</str>
-
-    <!-- Multiple "Spell Checkers" can be declared and used by this
-         component
-      -->
-
-    <!-- a spellchecker built from a field of the main index -->
-    <lst name="spellchecker">
-      <str name="name">default</str>
-      <str name="field">text</str>
-      <str name="classname">solr.DirectSolrSpellChecker</str>
-      <!-- the spellcheck distance measure used, the default is the internal levenshtein -->
-      <str name="distanceMeasure">internal</str>
-      <!-- minimum accuracy needed to be considered a valid spellcheck suggestion -->
-      <float name="accuracy">0.5</float>
-      <!-- the maximum #edits we consider when enumerating terms: can be 1 or 2 -->
-      <int name="maxEdits">2</int>
-      <!-- the minimum shared prefix when enumerating terms -->
-      <int name="minPrefix">1</int>
-      <!-- maximum number of inspections per result. -->
-      <int name="maxInspections">5</int>
-      <!-- minimum length of a query term to be considered for correction -->
-      <int name="minQueryLength">4</int>
-      <!-- maximum threshold of documents a query term can appear to be considered for correction -->
-      <float name="maxQueryFrequency">0.01</float>
-      <!-- uncomment this to require suggestions to occur in 1% of the documents
-       <float name="thresholdTokenFrequency">.01</float>
-      -->
-    </lst>
-
-    <!-- a spellchecker that can break or combine words.  See "/spell" handler below for usage -->
-    <lst name="spellchecker">
-      <str name="name">wordbreak</str>
-      <str name="classname">solr.WordBreakSolrSpellChecker</str>
-      <str name="field">name</str>
-      <str name="combineWords">true</str>
-      <str name="breakWords">true</str>
-      <int name="maxChanges">10</int>
-    </lst>
-
-    <!-- a spellchecker that uses a different distance measure -->
-    <!--
-       <lst name="spellchecker">
-         <str name="name">jarowinkler</str>
-         <str name="field">spell</str>
-         <str name="classname">solr.DirectSolrSpellChecker</str>
-         <str name="distanceMeasure">
-           org.apache.lucene.search.spell.JaroWinklerDistance
-         </str>
-       </lst>
-     -->
-
-    <!-- a spellchecker that use an alternate comparator 
-
-         comparatorClass be one of:
-          1. score (default)
-          2. freq (Frequency first, then score)
-          3. A fully qualified class name
-      -->
-    <!--
-       <lst name="spellchecker">
-         <str name="name">freq</str>
-         <str name="field">lowerfilt</str>
-         <str name="classname">solr.DirectSolrSpellChecker</str>
-         <str name="comparatorClass">freq</str>
-      -->
-
-    <!-- A spellchecker that reads the list of words from a file -->
-    <!--
-       <lst name="spellchecker">
-         <str name="classname">solr.FileBasedSpellChecker</str>
-         <str name="name">file</str>
-         <str name="sourceLocation">spellings.txt</str>
-         <str name="characterEncoding">UTF-8</str>
-         <str name="spellcheckIndexDir">spellcheckerFile</str>
-       </lst>
-      -->
-  </searchComponent>
-
-  <!-- A request handler for demonstrating the spellcheck component.  
-
-       NOTE: This is purely as an example.  The whole purpose of the
-       SpellCheckComponent is to hook it into the request handler that
-       handles your normal user queries so that a separate request is
-       not needed to get suggestions.
-
-       IN OTHER WORDS, THERE IS REALLY GOOD CHANCE THE SETUP BELOW IS
-       NOT WHAT YOU WANT FOR YOUR PRODUCTION SYSTEM!
-       
-       See http://wiki.apache.org/solr/SpellCheckComponent for details
-       on the request parameters.
-    -->
-  <requestHandler name="/spell" class="solr.SearchHandler" startup="lazy">
-    <lst name="defaults">
-      <str name="df">text</str>
-      <!-- Solr will use suggestions from both the 'default' spellchecker
-           and from the 'wordbreak' spellchecker and combine them.
-           collations (re-written queries) can include a combination of
-           corrections from both spellcheckers -->
-      <str name="spellcheck.dictionary">default</str>
-      <str name="spellcheck.dictionary">wordbreak</str>
-      <str name="spellcheck">on</str>
-      <str name="spellcheck.extendedResults">true</str>
-      <str name="spellcheck.count">10</str>
-      <str name="spellcheck.alternativeTermCount">5</str>
-      <str name="spellcheck.maxResultsForSuggest">5</str>
-      <str name="spellcheck.collate">true</str>
-      <str name="spellcheck.collateExtendedResults">true</str>
-      <str name="spellcheck.maxCollationTries">10</str>
-      <str name="spellcheck.maxCollations">5</str>
-    </lst>
-    <arr name="last-components">
-      <str>spellcheck</str>
-    </arr>
-  </requestHandler>
-
-  <!-- Term Vector Component
-
-       http://wiki.apache.org/solr/TermVectorComponent
-    -->
-  <searchComponent name="tvComponent" class="solr.TermVectorComponent"/>
-
-  <!-- A request handler for demonstrating the term vector component
-
-       This is purely as an example.
-
-       In reality you will likely want to add the component to your 
-       already specified request handlers. 
-    -->
-  <requestHandler name="/tvrh" class="solr.SearchHandler" startup="lazy">
-    <lst name="defaults">
-      <str name="df">text</str>
-      <bool name="tv">true</bool>
-    </lst>
-    <arr name="last-components">
-      <str>tvComponent</str>
-    </arr>
-  </requestHandler>
-
-  <!-- Clustering Component
-
-       http://wiki.apache.org/solr/ClusteringComponent
-
-       You'll need to set the solr.clustering.enabled system property
-       when running solr to run with clustering enabled:
-
-            java -Dsolr.clustering.enabled=true -jar start.jar
-
-    -->
-  <searchComponent name="clustering"
-                   enable="${solr.clustering.enabled:false}"
-                   class="solr.clustering.ClusteringComponent" >
-    <!-- Declare an engine -->
-    <lst name="engine">
-      <!-- The name, only one can be named "default" -->
-      <str name="name">default</str>
-
-      <!-- Class name of Carrot2 clustering algorithm.
-
-           Currently available algorithms are:
-           
-           * org.carrot2.clustering.lingo.LingoClusteringAlgorithm
-           * org.carrot2.clustering.stc.STCClusteringAlgorithm
-           * org.carrot2.clustering.kmeans.BisectingKMeansClusteringAlgorithm
-           
-           See http://project.carrot2.org/algorithms.html for the
-           algorithm's characteristics.
-        -->
-      <str name="carrot.algorithm">org.carrot2.clustering.lingo.LingoClusteringAlgorithm</str>
-
-      <!-- Overriding values for Carrot2 default algorithm attributes.
-
-           For a description of all available attributes, see:
-           http://download.carrot2.org/stable/manual/#chapter.components.
-           Use attribute key as name attribute of str elements
-           below. These can be further overridden for individual
-           requests by specifying attribute key as request parameter
-           name and attribute value as parameter value.
-        -->
-      <str name="LingoClusteringAlgorithm.desiredClusterCountBase">20</str>
-
-      <!-- Location of Carrot2 lexical resources.
-
-           A directory from which to load Carrot2-specific stop words
-           and stop labels. Absolute or relative to Solr config directory.
-           If a specific resource (e.g. stopwords.en) is present in the
-           specified dir, it will completely override the corresponding
-           default one that ships with Carrot2.
-
-           For an overview of Carrot2 lexical resources, see:
-           http://download.carrot2.org/head/manual/#chapter.lexical-resources
-        -->
-      <str name="carrot.lexicalResourcesDir">clustering/carrot2</str>
-
-      <!-- The language to assume for the documents.
-
-           For a list of allowed values, see:
-           http://download.carrot2.org/stable/manual/#section.attribute.lingo.MultilingualClustering.defaultLanguage
-       -->
-      <str name="MultilingualClustering.defaultLanguage">ENGLISH</str>
-    </lst>
-    <lst name="engine">
-      <str name="name">stc</str>
-      <str name="carrot.algorithm">org.carrot2.clustering.stc.STCClusteringAlgorithm</str>
-    </lst>
-  </searchComponent>
-
-  <!-- A request handler for demonstrating the clustering component
-
-       This is purely as an example.
-
-       In reality you will likely want to add the component to your 
-       already specified request handlers. 
-    -->
-  <requestHandler name="/clustering"
-                  startup="lazy"
-                  enable="${solr.clustering.enabled:false}"
-                  class="solr.SearchHandler">
-    <lst name="defaults">
-      <bool name="clustering">true</bool>
-      <str name="clustering.engine">default</str>
-      <bool name="clustering.results">true</bool>
-      <!-- The title field -->
-      <str name="carrot.title">name</str>
-      <str name="carrot.url">id</str>
-      <!-- The field to cluster on -->
-      <str name="carrot.snippet">features</str>
-      <!-- produce summaries -->
-      <bool name="carrot.produceSummary">true</bool>
-      <!-- the maximum number of labels per cluster -->
-      <!--<int name="carrot.numDescriptions">5</int>-->
-      <!-- produce sub clusters -->
-      <bool name="carrot.outputSubClusters">false</bool>
-
-      <str name="defType">edismax</str>
-      <str name="qf">
-        text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
-      </str>
-      <str name="q.alt">*:*</str>
-      <str name="rows">10</str>
-      <str name="fl">*,score</str>
-    </lst>
-    <arr name="last-components">
-      <str>clustering</str>
-    </arr>
-  </requestHandler>
-
-  <!-- Terms Component
-
-       http://wiki.apache.org/solr/TermsComponent
-
-       A component to return terms and document frequency of those
-       terms
-    -->
-  <searchComponent name="terms" class="solr.TermsComponent"/>
-
-  <!-- A request handler for demonstrating the terms component -->
-  <requestHandler name="/terms" class="solr.SearchHandler" startup="lazy">
-    <lst name="defaults">
-      <bool name="terms">true</bool>
-      <bool name="distrib">false</bool>
-    </lst>
-    <arr name="components">
-      <str>terms</str>
-    </arr>
-  </requestHandler>
-
-
-  <!-- Query Elevation Component
-
-       http://wiki.apache.org/solr/QueryElevationComponent
-
-       a search component that enables you to configure the top
-       results for a given query regardless of the normal lucene
-       scoring.
-    -->
-  <searchComponent name="elevator" class="solr.QueryElevationComponent" >
-    <!-- pick a fieldType to analyze queries -->
-    <str name="queryFieldType">string</str>
-    <str name="config-file">elevate.xml</str>
-  </searchComponent>
-
-  <!-- A request handler for demonstrating the elevator component -->
-  <requestHandler name="/elevate" class="solr.SearchHandler" startup="lazy">
-    <lst name="defaults">
-      <str name="echoParams">explicit</str>
-      <str name="df">text</str>
-    </lst>
-    <arr name="last-components">
-      <str>elevator</str>
-    </arr>
-  </requestHandler>
-
-  <!-- Highlighting Component
-
-       http://wiki.apache.org/solr/HighlightingParameters
-    -->
-  <searchComponent class="solr.HighlightComponent" name="highlight">
-    <highlighting>
-      <!-- Configure the standard fragmenter -->
-      <!-- This could most likely be commented out in the "default" case -->
-      <fragmenter name="gap"
-                  default="true"
-                  class="solr.highlight.GapFragmenter">
-        <lst name="defaults">
-          <int name="hl.fragsize">100</int>
-        </lst>
-      </fragmenter>
-
-      <!-- A regular-expression-based fragmenter 
-           (for sentence extraction) 
-        -->
-      <fragmenter name="regex"
-                  class="solr.highlight.RegexFragmenter">
-        <lst name="defaults">
-          <!-- slightly smaller fragsizes work better because of slop -->
-          <int name="hl.fragsize">70</int>
-          <!-- allow 50% slop on fragment sizes -->
-          <float name="hl.regex.slop">0.5</float>
-          <!-- a basic sentence pattern -->
-          <str name="hl.regex.pattern">[-\w ,/\n\&quot;&apos;]{20,200}</str>
-        </lst>
-      </fragmenter>
-
-      <!-- Configure the standard formatter -->
-      <formatter name="html"
-                 default="true"
-                 class="solr.highlight.HtmlFormatter">
-        <lst name="defaults">
-          <str name="hl.simple.pre"><![CDATA[<em>]]></str>
-          <str name="hl.simple.post"><![CDATA[</em>]]></str>
-        </lst>
-      </formatter>
-
-      <!-- Configure the standard encoder -->
-      <encoder name="html"
-               class="solr.highlight.HtmlEncoder" />
-
-      <!-- Configure the standard fragListBuilder -->
-      <fragListBuilder name="simple"
-                       class="solr.highlight.SimpleFragListBuilder"/>
-
-      <!-- Configure the single fragListBuilder -->
-      <fragListBuilder name="single"
-                       class="solr.highlight.SingleFragListBuilder"/>
-
-      <!-- Configure the weighted fragListBuilder -->
-      <fragListBuilder name="weighted"
-                       default="true"
-                       class="solr.highlight.WeightedFragListBuilder"/>
-
-      <!-- default tag FragmentsBuilder -->
-      <fragmentsBuilder name="default"
-                        default="true"
-                        class="solr.highlight.ScoreOrderFragmentsBuilder">
-        <!-- 
-        <lst name="defaults">
-          <str name="hl.multiValuedSeparatorChar">/</str>
-        </lst>
-        -->
-      </fragmentsBuilder>
-
-      <!-- multi-colored tag FragmentsBuilder -->
-      <fragmentsBuilder name="colored"
-                        class="solr.highlight.ScoreOrderFragmentsBuilder">
-        <lst name="defaults">
-          <str name="hl.tag.pre"><![CDATA[
-               <b style="background:yellow">,<b style="background:lawgreen">,
-               <b style="background:aquamarine">,<b style="background:magenta">,
-               <b style="background:palegreen">,<b style="background:coral">,
-               <b style="background:wheat">,<b style="background:khaki">,
-               <b style="background:lime">,<b style="background:deepskyblue">]]></str>
-          <str name="hl.tag.post"><![CDATA[</b>]]></str>
-        </lst>
-      </fragmentsBuilder>
-
-      <boundaryScanner name="default"
-                       default="true"
-                       class="solr.highlight.SimpleBoundaryScanner">
-        <lst name="defaults">
-          <str name="hl.bs.maxScan">10</str>
-          <str name="hl.bs.chars">.,!? &#9;&#10;&#13;</str>
-        </lst>
-      </boundaryScanner>
-
-      <boundaryScanner name="breakIterator"
-                       class="solr.highlight.BreakIteratorBoundaryScanner">
-        <lst name="defaults">
-          <!-- type should be one of CHARACTER, WORD(default), LINE and SENTENCE -->
-          <str name="hl.bs.type">WORD</str>
-          <!-- language and country are used when constructing Locale object.  -->
-          <!-- And the Locale object will be used when getting instance of BreakIterator -->
-          <str name="hl.bs.language">en</str>
-          <str name="hl.bs.country">US</str>
-        </lst>
-      </boundaryScanner>
-    </highlighting>
-  </searchComponent>
-
-  <!-- Update Processors
-
-       Chains of Update Processor Factories for dealing with Update
-       Requests can be declared, and then used by name in Update
-       Request Processors
-
-       http://wiki.apache.org/solr/UpdateRequestProcessor
-
-    -->
-  
-  <!-- Add unknown fields to the schema 
-  
-       An example field type guessing update processor that will
-       attempt to parse string-typed field values as Booleans, Longs,
-       Doubles, or Dates, and then add schema fields with the guessed
-       field types.  
-       
-       This requires that the schema is both managed and mutable, by
-       declaring schemaFactory as ManagedIndexSchemaFactory, with
-       mutable specified as true. 
-       
-       See http://wiki.apache.org/solr/GuessingFieldTypes
-    -->
-  <updateRequestProcessorChain name="add-unknown-fields-to-the-schema">
-    <processor class="solr.RemoveBlankFieldUpdateProcessorFactory"/>
-    <processor class="solr.ParseBooleanFieldUpdateProcessorFactory"/>
-    <processor class="solr.ParseLongFieldUpdateProcessorFactory"/>
-    <processor class="solr.ParseDoubleFieldUpdateProcessorFactory"/>
-    <processor class="solr.ParseDateFieldUpdateProcessorFactory">
-      <arr name="format">
-        <str>yyyy-MM-dd'T'HH:mm:ss.SSSZ</str>
-        <str>yyyy-MM-dd'T'HH:mm:ss,SSSZ</str>
-        <str>yyyy-MM-dd'T'HH:mm:ss.SSS</str>
-        <str>yyyy-MM-dd'T'HH:mm:ss,SSS</str>
-        <str>yyyy-MM-dd'T'HH:mm:ssZ</str>
-        <str>yyyy-MM-dd'T'HH:mm:ss</str>
-        <str>yyyy-MM-dd'T'HH:mmZ</str>
-        <str>yyyy-MM-dd'T'HH:mm</str>
-        <str>yyyy-MM-dd HH:mm:ss.SSSZ</str>
-        <str>yyyy-MM-dd HH:mm:ss,SSSZ</str>
-        <str>yyyy-MM-dd HH:mm:ss.SSS</str>
-        <str>yyyy-MM-dd HH:mm:ss,SSS</str>
-        <str>yyyy-MM-dd HH:mm:ssZ</str>
-        <str>yyyy-MM-dd HH:mm:ss</str>
-        <str>yyyy-MM-dd HH:mmZ</str>
-        <str>yyyy-MM-dd HH:mm</str>
-        <str>yyyy-MM-dd</str>
-      </arr>
-    </processor>
-    <processor class="solr.AddSchemaFieldsUpdateProcessorFactory">
-      <str name="defaultFieldType">text_general</str>
-      <lst name="typeMapping">
-        <str name="valueClass">java.lang.Boolean</str>
-        <str name="fieldType">booleans</str>
-      </lst>
-      <lst name="typeMapping">
-        <str name="valueClass">java.util.Date</str>
-        <str name="fieldType">tdates</str>
-      </lst>
-      <lst name="typeMapping">
-        <str name="valueClass">java.lang.Long</str>
-        <str name="valueClass">java.lang.Integer</str>
-        <str name="fieldType">tlongs</str>
-      </lst>
-      <lst name="typeMapping">
-        <str name="valueClass">java.lang.Number</str>
-        <str name="fieldType">tdoubles</str>
-      </lst>
-    </processor>
-    <processor class="solr.LogUpdateProcessorFactory"/>
-    <processor class="solr.RunUpdateProcessorFactory"/>
-  </updateRequestProcessorChain>
-
-  <!-- Deduplication
-
-       An example dedup update processor that creates the "id" field
-       on the fly based on the hash code of some other fields.  This
-       example has overwriteDupes set to false since we are using the
-       id field as the signatureField and Solr will maintain
-       uniqueness based on that anyway.  
-       
-    -->
-  <!--
-     <updateRequestProcessorChain name="dedupe">
-       <processor class="solr.processor.SignatureUpdateProcessorFactory">
-         <bool name="enabled">true</bool>
-         <str name="signatureField">id</str>
-         <bool name="overwriteDupes">false</bool>
-         <str name="fields">name,features,cat</str>
-         <str name="signatureClass">solr.processor.Lookup3Signature</str>
-       </processor>
-       <processor class="solr.LogUpdateProcessorFactory" />
-       <processor class="solr.RunUpdateProcessorFactory" />
-     </updateRequestProcessorChain>
-    -->
-
-  <!-- Language identification
-
-       This example update chain identifies the language of the incoming
-       documents using the langid contrib. The detected language is
-       written to field language_s. No field name mapping is done.
-       The fields used for detection are text, title, subject and description,
-       making this example suitable for detecting languages form full-text
-       rich documents injected via ExtractingRequestHandler.
-       See more about langId at http://wiki.apache.org/solr/LanguageDetection
-    -->
-  <!--
-   <updateRequestProcessorChain name="langid">
-     <processor class="org.apache.solr.update.processor.TikaLanguageIdentifierUpdateProcessorFactory">
-       <str name="langid.fl">text,title,subject,description</str>
-       <str name="langid.langField">language_s</str>
-       <str name="langid.fallback">en</str>
-     </processor>
-     <processor class="solr.LogUpdateProcessorFactory" />
-     <processor class="solr.RunUpdateProcessorFactory" />
-   </updateRequestProcessorChain>
-  -->
-
-  <!-- Script update processor
-
-    This example hooks in an update processor implemented using JavaScript.
-
-    See more about the script update processor at http://wiki.apache.org/solr/ScriptUpdateProcessor
-  -->
-  <!--
-    <updateRequestProcessorChain name="script">
-      <processor class="solr.StatelessScriptUpdateProcessorFactory">
-        <str name="script">update-script.js</str>
-        <lst name="params">
-          <str name="config_param">example config parameter</str>
-        </lst>
-      </processor>
-      <processor class="solr.RunUpdateProcessorFactory" />
-    </updateRequestProcessorChain>
-  -->
-
-  <!-- Response Writers
-
-       http://wiki.apache.org/solr/QueryResponseWriter
-
-       Request responses will be written using the writer specified by
-       the 'wt' request parameter matching the name of a registered
-       writer.
-
-       The "default" writer is the default and will be used if 'wt' is
-       not specified in the request.
-    -->
-  <!-- The following response writers are implicitly configured unless
-       overridden...
-    -->
-  <!--
-     <queryResponseWriter name="xml" 
-                          default="true"
-                          class="solr.XMLResponseWriter" />
-     <queryResponseWriter name="json" class="solr.JSONResponseWriter"/>
-     <queryResponseWriter name="python" class="solr.PythonResponseWriter"/>
-     <queryResponseWriter name="ruby" class="solr.RubyResponseWriter"/>
-     <queryResponseWriter name="php" class="solr.PHPResponseWriter"/>
-     <queryResponseWriter name="phps" class="solr.PHPSerializedResponseWriter"/>
-     <queryResponseWriter name="csv" class="solr.CSVResponseWriter"/>
-     <queryResponseWriter name="schema.xml" class="solr.SchemaXmlResponseWriter"/>
-    -->
-
-  <queryResponseWriter name="json" class="solr.JSONResponseWriter">
-    <!-- For the purposes of the tutorial, JSON responses are written as
-     plain text so that they are easy to read in *any* browser.
-     If you expect a MIME type of "application/json" just remove this override.
-    -->
-    <str name="content-type">text/plain; charset=UTF-8</str>
-  </queryResponseWriter>
-
-  <!--
-     Custom response writers can be declared as needed...
-    -->
-  <queryResponseWriter name="velocity" class="solr.VelocityResponseWriter" startup="lazy"/>
-
-
-  <!-- XSLT response writer transforms the XML output by any xslt file found
-       in Solr's conf/xslt directory.  Changes to xslt files are checked for
-       every xsltCacheLifetimeSeconds.  
-    -->
-  <queryResponseWriter name="xslt" class="solr.XSLTResponseWriter">
-    <int name="xsltCacheLifetimeSeconds">5</int>
-  </queryResponseWriter>
-
-  <!-- Query Parsers
-
-       http://wiki.apache.org/solr/SolrQuerySyntax
-
-       Multiple QParserPlugins can be registered by name, and then
-       used in either the "defType" param for the QueryComponent (used
-       by SearchHandler) or in LocalParams
-    -->
-  <!-- example of registering a query parser -->
-  <!--
-     <queryParser name="myparser" class="com.mycompany.MyQParserPlugin"/>
-    -->
-
-  <!-- Function Parsers
-
-       http://wiki.apache.org/solr/FunctionQuery
-
-       Multiple ValueSourceParsers can be registered by name, and then
-       used as function names when using the "func" QParser.
-    -->
-  <!-- example of registering a custom function parser  -->
-  <!--
-     <valueSourceParser name="myfunc" 
-                        class="com.mycompany.MyValueSourceParser" />
-    -->
-
-
-  <!-- Document Transformers
-       http://wiki.apache.org/solr/DocTransformers
-    -->
-  <!--
-     Could be something like:
-     <transformer name="db" class="com.mycompany.LoadFromDatabaseTransformer" >
-       <int name="connection">jdbc://....</int>
-     </transformer>
-     
-     To add a constant value to all docs, use:
-     <transformer name="mytrans2" class="org.apache.solr.response.transform.ValueAugmenterFactory" >
-       <int name="value">5</int>
-     </transformer>
-     
-     If you want the user to still be able to change it with _value:something_ use this:
-     <transformer name="mytrans3" class="org.apache.solr.response.transform.ValueAugmenterFactory" >
-       <double name="defaultValue">5</double>
-     </transformer>
-
-      If you are using the QueryElevationComponent, you may wish to mark documents that get boosted.  The
-      EditorialMarkerFactory will do exactly that:
-     <transformer name="qecBooster" class="org.apache.solr.response.transform.EditorialMarkerFactory" />
-    -->
-
-
-  <!-- Legacy config for the admin interface -->
-  <admin>
-    <defaultQuery>*:*</defaultQuery>
-  </admin>
-
-</config>

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/stopwords.txt b/zookeeper/example-schemaless/solr/collection1/conf/stopwords.txt
deleted file mode 100644 (file)
index ae1e83e..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/stopwords.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.

diff --git a/zookeeper/example-schemaless/solr/collection1/conf/synonyms.txt b/zookeeper/example-schemaless/solr/collection1/conf/synonyms.txt
deleted file mode 100644 (file)
index 7f72128..0000000
--- a/zookeeper/example-schemaless/solr/collection1/conf/synonyms.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#-----------------------------------------------------------------------
-#some test synonym mappings unlikely to appear in real input text
-aaafoo => aaabar
-bbbfoo => bbbfoo bbbbar
-cccfoo => cccbar cccbaz
-fooaaa,baraaa,bazaaa
-
-# Some synonym groups specific to this example
-GB,gib,gigabyte,gigabytes
-MB,mib,megabyte,megabytes
-Television, Televisions, TV, TVs
-#notice we use "gib" instead of "GiB" so any WordDelimiterFilter coming
-#after us won't split it into two words.
-
-# Synonym mappings can be used for spelling correction too
-pixima => pixma
-

diff --git a/zookeeper/example-schemaless/solr/collection1/core.properties b/zookeeper/example-schemaless/solr/collection1/core.properties
deleted file mode 100644 (file)
index bc0cf7d..0000000
--- a/zookeeper/example-schemaless/solr/collection1/core.properties
+++ /dev/null
@@ -1 +0,0 @@
-name=collection1
\ No newline at end of file

diff --git a/zookeeper/exampledocs/books.csv b/zookeeper/exampledocs/books.csv
deleted file mode 100644 (file)
index 8ccecbb..0000000
--- a/zookeeper/exampledocs/books.csv
+++ /dev/null
@@ -1,11 +0,0 @@
-id,cat,name,price,inStock,author,series_t,sequence_i,genre_s
-0553573403,book,A Game of Thrones,7.99,true,George R.R. Martin,"A Song of Ice and Fire",1,fantasy
-0553579908,book,A Clash of Kings,7.99,true,George R.R. Martin,"A Song of Ice and Fire",2,fantasy
-055357342X,book,A Storm of Swords,7.99,true,George R.R. Martin,"A Song of Ice and Fire",3,fantasy
-0553293354,book,Foundation,7.99,true,Isaac Asimov,Foundation Novels,1,scifi
-0812521390,book,The Black Company,6.99,false,Glen Cook,The Chronicles of The Black Company,1,fantasy
-0812550706,book,Ender's Game,6.99,true,Orson Scott Card,Ender,1,scifi
-0441385532,book,Jhereg,7.95,false,Steven Brust,Vlad Taltos,1,fantasy
-0380014300,book,Nine Princes In Amber,6.99,true,Roger Zelazny,the Chronicles of Amber,1,fantasy
-0805080481,book,The Book of Three,5.99,true,Lloyd Alexander,The Chronicles of Prydain,1,fantasy
-080508049X,book,The Black Cauldron,5.99,true,Lloyd Alexander,The Chronicles of Prydain,2,fantasy

diff --git a/zookeeper/exampledocs/books.json b/zookeeper/exampledocs/books.json
deleted file mode 100644 (file)
index f82d510..0000000
--- a/zookeeper/exampledocs/books.json
+++ /dev/null
@@ -1,51 +0,0 @@
-[
-  {
-    "id" : "978-0641723445",
-    "cat" : ["book","hardcover"],
-    "name" : "The Lightning Thief",
-    "author" : "Rick Riordan",
-    "series_t" : "Percy Jackson and the Olympians",
-    "sequence_i" : 1,
-    "genre_s" : "fantasy",
-    "inStock" : true,
-    "price" : 12.50,
-    "pages_i" : 384
-  }
-,
-  {
-    "id" : "978-1423103349",
-    "cat" : ["book","paperback"],
-    "name" : "The Sea of Monsters",
-    "author" : "Rick Riordan",
-    "series_t" : "Percy Jackson and the Olympians",
-    "sequence_i" : 2,
-    "genre_s" : "fantasy",
-    "inStock" : true,
-    "price" : 6.49,
-    "pages_i" : 304
-  }
-,
-  {
-    "id" : "978-1857995879",
-    "cat" : ["book","paperback"],
-    "name" : "Sophie's World : The Greek Philosophers",
-    "author" : "Jostein Gaarder",
-    "sequence_i" : 1,
-    "genre_s" : "fantasy",
-    "inStock" : true,
-    "price" : 3.07,
-    "pages_i" : 64
-  }
-,
-  {
-    "id" : "978-1933988177",
-    "cat" : ["book","paperback"],
-    "name" : "Lucene in Action, Second Edition",
-    "author" : "Michael McCandless",
-    "sequence_i" : 1,
-    "genre_s" : "IT",
-    "inStock" : true,
-    "price" : 30.50,
-    "pages_i" : 475
-  }
-]

diff --git a/zookeeper/exampledocs/gb18030-example.xml b/zookeeper/exampledocs/gb18030-example.xml
deleted file mode 100644 (file)
index 769be19..0000000
--- a/zookeeper/exampledocs/gb18030-example.xml
+++ /dev/null
@@ -1,32 +0,0 @@
-<?xml version="1.0" encoding="GB18030"?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add>
-  <doc>
-    <field name="id">GB18030TEST</field>
-    <field name="name">Test with some GB18030 encoded characters</field>
-    <field name="features">No accents here</field>
-    <field name="features">ÕâÊÇÒ»¸ö¹¦ÄÜ</field>
-    <field name="features">This is a feature (translated)</field>
-    <field name="features">Õâ·ÝÎļþÊǺÜÓйâÔó</field>
-    <field name="features">This document is very shiny (translated)</field>
-    <field name="price">0</field>
-    <field name="inStock">true</field>
-  </doc>
-</add>
-

diff --git a/zookeeper/exampledocs/hd.xml b/zookeeper/exampledocs/hd.xml
deleted file mode 100644 (file)
index 3c5448d..0000000
--- a/zookeeper/exampledocs/hd.xml
+++ /dev/null
@@ -1,56 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add>
-<doc>
-  <field name="id">SP2514N</field>
-  <field name="name">Samsung SpinPoint P120 SP2514N - hard drive - 250 GB - ATA-133</field>
-  <field name="manu">Samsung Electronics Co. Ltd.</field>
-  <!-- Join -->
-  <field name="manu_id_s">samsung</field>
-  <field name="cat">electronics</field>
-  <field name="cat">hard drive</field>
-  <field name="features">7200RPM, 8MB cache, IDE Ultra ATA-133</field>
-  <field name="features">NoiseGuard, SilentSeek technology, Fluid Dynamic Bearing (FDB) motor</field>
-  <field name="price">92</field>
-  <field name="popularity">6</field>
-  <field name="inStock">true</field>
-  <field name="manufacturedate_dt">2006-02-13T15:26:37Z</field>
-  <!-- Near Oklahoma city -->
-  <field name="store">35.0752,-97.032</field>
-</doc>
-
-<doc>
-  <field name="id">6H500F0</field>
-  <field name="name">Maxtor DiamondMax 11 - hard drive - 500 GB - SATA-300</field>
-  <field name="manu">Maxtor Corp.</field>
-  <!-- Join -->
-  <field name="manu_id_s">maxtor</field>
-  <field name="cat">electronics</field>
-  <field name="cat">hard drive</field>
-  <field name="features">SATA 3.0Gb/s, NCQ</field>
-  <field name="features">8.5ms seek</field>
-  <field name="features">16MB cache</field>
-  <field name="price">350</field>
-  <field name="popularity">6</field>
-  <field name="inStock">true</field>
-  <!-- Buffalo store -->
-  <field name="store">45.17614,-93.87341</field>
-  <field name="manufacturedate_dt">2006-02-13T15:26:37Z</field>
-</doc>
-</add>
-

diff --git a/zookeeper/exampledocs/ipod_other.xml b/zookeeper/exampledocs/ipod_other.xml
deleted file mode 100644 (file)
index 7756c9f..0000000
--- a/zookeeper/exampledocs/ipod_other.xml
+++ /dev/null
@@ -1,60 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add>
-
-<doc>
-  <field name="id">F8V7067-APL-KIT</field>
-  <field name="name">Belkin Mobile Power Cord for iPod w/ Dock</field>
-  <field name="manu">Belkin</field>
-  <!-- Join -->
-  <field name="manu_id_s">belkin</field>
-  <field name="cat">electronics</field>
-  <field name="cat">connector</field>
-  <field name="features">car power adapter, white</field>
-  <field name="weight">4</field>
-  <field name="price">19.95</field>
-  <field name="popularity">1</field>
-  <field name="inStock">false</field>
-  <!-- Buffalo store -->
-  <field name="store">45.18014,-93.87741</field>
-  <field name="manufacturedate_dt">2005-08-01T16:30:25Z</field>
-</doc>
-
-<doc>
-  <field name="id">IW-02</field>
-  <field name="name">iPod &amp; iPod Mini USB 2.0 Cable</field>
-  <field name="manu">Belkin</field>
-  <!-- Join -->
-  <field name="manu_id_s">belkin</field>
-  <field name="cat">electronics</field>
-  <field name="cat">connector</field>
-  <field name="features">car power adapter for iPod, white</field>
-  <field name="weight">2</field>
-  <field name="price">11.50</field>
-  <field name="popularity">1</field>
-  <field name="inStock">false</field>
-  <!-- San Francisco store -->
-  <field name="store">37.7752,-122.4232</field>
-  <field name="manufacturedate_dt">2006-02-14T23:55:59Z</field>
-</doc>
-
-
-</add>
-
-
-

diff --git a/zookeeper/exampledocs/ipod_video.xml b/zookeeper/exampledocs/ipod_video.xml
deleted file mode 100644 (file)
index 1ca5f6f..0000000
--- a/zookeeper/exampledocs/ipod_video.xml
+++ /dev/null
@@ -1,40 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add><doc>
-  <field name="id">MA147LL/A</field>
-  <field name="name">Apple 60 GB iPod with Video Playback Black</field>
-  <field name="manu">Apple Computer Inc.</field>
-  <!-- Join -->
-  <field name="manu_id_s">apple</field>
-  <field name="cat">electronics</field>
-  <field name="cat">music</field>
-  <field name="features">iTunes, Podcasts, Audiobooks</field>
-  <field name="features">Stores up to 15,000 songs, 25,000 photos, or 150 hours of video</field>
-  <field name="features">2.5-inch, 320x240 color TFT LCD display with LED backlight</field>
-  <field name="features">Up to 20 hours of battery life</field>
-  <field name="features">Plays AAC, MP3, WAV, AIFF, Audible, Apple Lossless, H.264 video</field>
-  <field name="features">Notes, Calendar, Phone book, Hold button, Date display, Photo wallet, Built-in games, JPEG photo playback, Upgradeable firmware, USB 2.0 compatibility, Playback speed control, Rechargeable capability, Battery level indication</field>
-  <field name="includes">earbud headphones, USB cable</field>
-  <field name="weight">5.5</field>
-  <field name="price">399.00</field>
-  <field name="popularity">10</field>
-  <field name="inStock">true</field>
-  <!-- Dodge City store -->
-  <field name="store">37.7752,-100.0232</field>
-  <field name="manufacturedate_dt">2005-10-12T08:00:00Z</field>
-</doc></add>

diff --git a/zookeeper/exampledocs/manufacturers.xml b/zookeeper/exampledocs/manufacturers.xml
deleted file mode 100644 (file)
index e3121d5..0000000
--- a/zookeeper/exampledocs/manufacturers.xml
+++ /dev/null
@@ -1,75 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add>
-  <doc>
-    <field name="id">adata</field>
-    <field name="compName_s">A-Data Technology</field>
-    <field name="address_s">46221 Landing Parkway Fremont, CA 94538</field>
-  </doc>
-  <doc>
-    <field name="id">apple</field>
-    <field name="compName_s">Apple</field>
-    <field name="address_s">1 Infinite Way, Cupertino CA</field>
-  </doc>
-  <doc>
-    <field name="id">asus</field>
-    <field name="compName_s">ASUS Computer</field>
-    <field name="address_s">800 Corporate Way Fremont, CA 94539</field>
-  </doc>
-  <doc>
-    <field name="id">ati</field>
-    <field name="compName_s">ATI Technologies</field>
-    <field name="address_s">33 Commerce Valley Drive East Thornhill, ON L3T 7N6 Canada</field>
-  </doc>
-  <doc>
-    <field name="id">belkin</field>
-    <field name="compName_s">Belkin</field>
-    <field name="address_s">12045 E. Waterfront Drive Playa Vista, CA 90094</field>
-  </doc>
-  <doc>
-    <field name="id">canon</field>
-    <field name="compName_s">Canon, Inc.</field>
-    <field name="address_s">One Canon Plaza Lake Success, NY 11042</field>
-  </doc>
-  <doc>
-    <field name="id">corsair</field>
-    <field name="compName_s">Corsair Microsystems</field>
-    <field name="address_s">46221 Landing Parkway Fremont, CA 94538</field>
-  </doc>
-  <doc>
-    <field name="id">dell</field>
-    <field name="compName_s">Dell, Inc.</field>
-    <field name="address_s">One Dell Way Round Rock, Texas 78682</field>
-  </doc>
-  <doc>
-    <field name="id">maxtor</field>
-    <field name="compName_s">Maxtor Corporation</field>
-    <field name="address_s">920 Disc Drive Scotts Valley, CA 95066</field>
-  </doc>
-  <doc>
-    <field name="id">samsung</field>
-    <field name="compName_s">Samsung Electronics Co. Ltd.</field>
-    <field name="address_s">105 Challenger Rd. Ridgefield Park, NJ 07660-0511</field>
-  </doc>
-  <doc>
-    <field name="id">viewsonic</field>
-    <field name="compName_s">ViewSonic Corp</field>
-    <field name="address_s">381 Brea Canyon Road Walnut, CA 91789-0708</field>
-  </doc>
-</add>
-

diff --git a/zookeeper/exampledocs/mem.xml b/zookeeper/exampledocs/mem.xml
deleted file mode 100644 (file)
index 0b89d67..0000000
--- a/zookeeper/exampledocs/mem.xml
+++ /dev/null
@@ -1,77 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add>
-<doc>
-  <field name="id">TWINX2048-3200PRO</field>
-  <field name="name">CORSAIR  XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) Dual Channel Kit System Memory - Retail</field>
-  <field name="manu">Corsair Microsystems Inc.</field>
-  <!-- Join -->
-  <field name="manu_id_s">corsair</field>
-  <field name="cat">electronics</field>
-  <field name="cat">memory</field>
-  <field name="features">CAS latency 2,        2-3-3-6 timing, 2.75v, unbuffered, heat-spreader</field>
-  <field name="price">185</field>
-  <field name="popularity">5</field>
-  <field name="inStock">true</field>
-  <!-- San Francisco store -->
-  <field name="store">37.7752,-122.4232</field>
-  <field name="manufacturedate_dt">2006-02-13T15:26:37Z</field>
-
-  <!-- a field for testing payload tagged text via DelimitedPayloadTokenFilter -->
-  <field name="payloads">electronics|6.0 memory|3.0</field>
-</doc>
-
-<doc>
-  <field name="id">VS1GB400C3</field>
-  <field name="name">CORSAIR ValueSelect 1GB 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) System Memory - Retail</field>
-  <field name="manu">Corsair Microsystems Inc.</field>
-  <!-- Join -->
-  <field name="manu_id_s">corsair</field>
-  <field name="cat">electronics</field>
-  <field name="cat">memory</field>
-  <field name="price">74.99</field>
-  <field name="popularity">7</field>
-  <field name="inStock">true</field>
-  <!-- Dodge City store -->
-  <field name="store">37.7752,-100.0232</field>
-  <field name="manufacturedate_dt">2006-02-13T15:26:37Z</field>
-
-  <field name="payloads">electronics|4.0 memory|2.0</field>
-</doc>
-
-<doc>
-  <field name="id">VDBDB1A16</field>
-  <field name="name">A-DATA V-Series 1GB 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) System Memory - OEM</field>
-  <field name="manu">A-DATA Technology Inc.</field>
-  <!-- Join -->
-  <field name="manu_id_s">corsair</field>
-  <field name="cat">electronics</field>
-  <field name="cat">memory</field>
-  <field name="features">CAS latency 3,         2.7v</field>
-  <!-- note: price & popularity is missing on this one -->
-  <field name="popularity">0</field>
-  <field name="inStock">true</field>
-  <!-- Buffalo store -->
-  <field name="store">45.18414,-93.88141</field>
-  <field name="manufacturedate_dt">2006-02-13T15:26:37Z</field>
-
-  <field name="payloads">electronics|0.9 memory|0.1</field>
-</doc>
-
-</add>
-

diff --git a/zookeeper/exampledocs/money.xml b/zookeeper/exampledocs/money.xml
deleted file mode 100644 (file)
index b1b8036..0000000
--- a/zookeeper/exampledocs/money.xml
+++ /dev/null
@@ -1,65 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- Example documents utilizing the CurrencyField type -->
-<add>
-<doc>
-  <field name="id">USD</field>
-  <field name="name">One Dollar</field>
-  <field name="manu">Bank of America</field>
-  <field name="manu_id_s">boa</field>
-  <field name="cat">currency</field>
-  <field name="features">Coins and notes</field>
-  <field name="price_c">1,USD</field>
-  <field name="inStock">true</field>
-</doc>
-
-<doc>
-  <field name="id">EUR</field>
-  <field name="name">One Euro</field>
-  <field name="manu">European Union</field>
-  <field name="manu_id_s">eu</field>
-  <field name="cat">currency</field>
-  <field name="features">Coins and notes</field>
-  <field name="price_c">1,EUR</field>
-  <field name="inStock">true</field>
-</doc>
-
-<doc>
-  <field name="id">GBP</field>
-  <field name="name">One British Pound</field>
-  <field name="manu">U.K.</field>
-  <field name="manu_id_s">uk</field>
-  <field name="cat">currency</field>
-  <field name="features">Coins and notes</field>
-  <field name="price_c">1,GBP</field>
-  <field name="inStock">true</field>
-</doc>
-
-<doc>
-  <field name="id">NOK</field>
-  <field name="name">One Krone</field>
-  <field name="manu">Bank of Norway</field>
-  <field name="manu_id_s">nor</field>
-  <field name="cat">currency</field>
-  <field name="features">Coins and notes</field>
-  <field name="price_c">1,NOK</field>
-  <field name="inStock">true</field>
-</doc>
-
-</add>
-

diff --git a/zookeeper/exampledocs/monitor.xml b/zookeeper/exampledocs/monitor.xml
deleted file mode 100644 (file)
index db986fa..0000000
--- a/zookeeper/exampledocs/monitor.xml
+++ /dev/null
@@ -1,35 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add><doc>
-  <field name="id">3007WFP</field>
-  <field name="name">Dell Widescreen UltraSharp 3007WFP</field>
-  <field name="manu">Dell, Inc.</field>
-  <!-- Join -->
-  <field name="manu_id_s">dell</field>
-  <field name="cat">electronics</field>
-  <field name="cat">monitor</field>
-  <field name="features">30" TFT active matrix LCD, 2560 x 1600, .25mm dot pitch, 700:1 contrast</field>
-  <field name="includes">USB cable</field>
-  <field name="weight">401.6</field>
-  <field name="price">2199</field>
-  <field name="popularity">6</field>
-  <field name="inStock">true</field>
-  <!-- Buffalo store -->
-  <field name="store">43.17614,-90.57341</field>
-</doc></add>
-

diff --git a/zookeeper/exampledocs/monitor2.xml b/zookeeper/exampledocs/monitor2.xml
deleted file mode 100644 (file)
index 79b9949..0000000
--- a/zookeeper/exampledocs/monitor2.xml
+++ /dev/null
@@ -1,34 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add><doc>
-  <field name="id">VA902B</field>
-  <field name="name">ViewSonic VA902B - flat panel display - TFT - 19"</field>
-  <field name="manu">ViewSonic Corp.</field>
-  <!-- Join -->
-  <field name="manu_id_s">viewsonic</field>
-  <field name="cat">electronics</field>
-  <field name="cat">monitor</field>
-  <field name="features">19" TFT active matrix LCD, 8ms response time, 1280 x 1024 native resolution</field>
-  <field name="weight">190.4</field>
-  <field name="price">279.95</field>
-  <field name="popularity">6</field>
-  <field name="inStock">true</field>
-  <!-- Buffalo store -->
-  <field name="store">45.18814,-93.88541</field>
-</doc></add>
-

diff --git a/zookeeper/exampledocs/mp500.xml b/zookeeper/exampledocs/mp500.xml
deleted file mode 100644 (file)
index bab401a..0000000
--- a/zookeeper/exampledocs/mp500.xml
+++ /dev/null
@@ -1,43 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add><doc>
-  <field name="id">0579B002</field>
-  <field name="name">Canon PIXMA MP500 All-In-One Photo Printer</field>
-  <field name="manu">Canon Inc.</field>
-  <!-- Join -->
-  <field name="manu_id_s">canon</field>
-  <field name="cat">electronics</field>
-  <field name="cat">multifunction printer</field>
-  <field name="cat">printer</field>
-  <field name="cat">scanner</field>
-  <field name="cat">copier</field>
-  <field name="features">Multifunction ink-jet color photo printer</field>
-  <field name="features">Flatbed scanner, optical scan resolution of 1,200 x 2,400 dpi</field>
-  <field name="features">2.5" color LCD preview screen</field>
-  <field name="features">Duplex Copying</field>
-  <field name="features">Printing speed up to 29ppm black, 19ppm color</field>
-  <field name="features">Hi-Speed USB</field>
-  <field name="features">memory card: CompactFlash, Micro Drive, SmartMedia, Memory Stick, Memory Stick Pro, SD Card, and MultiMediaCard</field>
-  <field name="weight">352</field>
-  <field name="price">179.99</field>
-  <field name="popularity">6</field>
-  <field name="inStock">true</field>
-  <!-- Buffalo store -->
-  <field name="store">45.19214,-93.89941</field>
-</doc></add>
-

diff --git a/zookeeper/exampledocs/post.jar b/zookeeper/exampledocs/post.jar
deleted file mode 100644 (file)
index 0042a46..0000000
Binary files a/zookeeper/exampledocs/post.jar and /dev/null differ

diff --git a/zookeeper/exampledocs/post.sh b/zookeeper/exampledocs/post.sh
deleted file mode 100755 (executable)
index 113884d..0000000
--- a/zookeeper/exampledocs/post.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-FILES=$*
-URL=http://localhost:8983/solr/update
-
-for f in $FILES; do
-  echo Posting file $f to $URL
-  curl $URL --data-binary @$f -H 'Content-type:application/xml' 
-  echo
-done
-
-#send the commit command to make sure all the changes are flushed and visible
-#curl $URL --data-binary '<commit softCommit=true/>' -H 'Content-type:application/xml'
-
-curl "$URL?softCommit=true"
-echo

diff --git a/zookeeper/exampledocs/sd500.xml b/zookeeper/exampledocs/sd500.xml
deleted file mode 100644 (file)
index 145c6fd..0000000
--- a/zookeeper/exampledocs/sd500.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add><doc>
-  <field name="id">9885A004</field>
-  <field name="name">Canon PowerShot SD500</field>
-  <field name="manu">Canon Inc.</field>
-  <!-- Join -->
-  <field name="manu_id_s">canon</field>
-  <field name="cat">electronics</field>
-  <field name="cat">camera</field>
-  <field name="features">3x zoop, 7.1 megapixel Digital ELPH</field>
-  <field name="features">movie clips up to 640x480 @30 fps</field>
-  <field name="features">2.0" TFT LCD, 118,000 pixels</field>
-  <field name="features">built in flash, red-eye reduction</field>
-  <field name="includes">32MB SD card, USB cable, AV cable, battery</field>
-  <field name="weight">6.4</field>
-  <field name="price">329.95</field>
-  <field name="popularity">7</field>
-  <field name="inStock">true</field>
-  <field name="manufacturedate_dt">2006-02-13T15:26:37Z</field>
-  <!-- Buffalo store -->
-  <field name="store">45.19614,-93.90341</field>
-</doc></add>

diff --git a/zookeeper/exampledocs/solr.xml b/zookeeper/exampledocs/solr.xml
deleted file mode 100644 (file)
index 410e5f7..0000000
--- a/zookeeper/exampledocs/solr.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add>
-<doc>
-  <field name="id">SOLR1000</field>
-  <field name="name">Solr, the Enterprise Search Server</field>
-  <field name="manu">Apache Software Foundation</field>
-  <field name="cat">software</field>
-  <field name="cat">search</field>
-  <field name="features">Advanced Full-Text Search Capabilities using Lucene</field>
-  <field name="features">Optimized for High Volume Web Traffic</field>
-  <field name="features">Standards Based Open Interfaces - XML and HTTP</field>
-  <field name="features">Comprehensive HTML Administration Interfaces</field>
-  <field name="features">Scalability - Efficient Replication to other Solr Search Servers</field>
-  <field name="features">Flexible and Adaptable with XML configuration and Schema</field>
-  <field name="features">Good unicode support: h&#xE9;llo (hello with an accent over the e)</field>
-  <field name="price">0</field>
-  <field name="popularity">10</field>
-  <field name="inStock">true</field>
-  <field name="incubationdate_dt">2006-01-17T00:00:00.000Z</field>
-</doc>
-</add>
-

diff --git a/zookeeper/exampledocs/test_utf8.sh b/zookeeper/exampledocs/test_utf8.sh
deleted file mode 100755 (executable)
index edfd972..0000000
--- a/zookeeper/exampledocs/test_utf8.sh
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/sh
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#Test script to tell if the server is accepting UTF-8
-#The python writer currently escapes non-ascii chars, so it's good for testing
-
-URL=http://localhost:8983/solr
-
-if [ ! -z $1 ]; then
-  URL=$1
-fi
-
-curl "$URL/select?q=hello&params=explicit&wt=python" 2> /dev/null | grep 'hello' > /dev/null 2>&1
-if [ $? = 0 ]; then
-  echo "Solr server is up."
-else
-  echo "ERROR: Could not curl to Solr - is curl installed? Is Solr not running?"
-  exit 1
-fi
-
-curl "$URL/select?q=h%C3%A9llo&echoParams=explicit&wt=python" 2> /dev/null | grep 'h\\u00e9llo' > /dev/null 2>&1
-if [ $? = 0 ]; then
-  echo "HTTP GET is accepting UTF-8"
-else
-  echo "ERROR: HTTP GET is not accepting UTF-8"
-fi
-
-curl $URL/select --data-binary 'q=h%C3%A9llo&echoParams=explicit&wt=python' -H 'Content-type:application/x-www-form-urlencoded; charset=UTF-8' 2> /dev/null | grep 'h\\u00e9llo' > /dev/null 2>&1
-if [ $? = 0 ]; then
-  echo "HTTP POST is accepting UTF-8"
-else
-  echo "ERROR: HTTP POST is not accepting UTF-8"
-fi
-
-curl $URL/select --data-binary 'q=h%C3%A9llo&echoParams=explicit&wt=python' 2> /dev/null | grep 'h\\u00e9llo' > /dev/null 2>&1
-if [ $? = 0 ]; then
-  echo "HTTP POST defaults to UTF-8"
-else
-  echo "HTTP POST does not default to UTF-8"
-fi
-
-
-#A unicode character outside of the BMP (a circle with an x inside)
-CHAR="𐌈"
-CODEPOINT='0x10308'
-#URL encoded UTF8 of the codepoint
-URL_UTF8='%F0%90%8C%88'
-#expected return of the python writer (currently uses UTF-16 surrogates)
-EXPECTED='\\ud800\\udf08'
-
-curl "$URL/select?q=$URL_UTF8&echoParams=explicit&wt=python" 2> /dev/null | grep $EXPECTED > /dev/null 2>&1
-if [ $? = 0 ]; then
-  echo "HTTP GET is accepting UTF-8 beyond the basic multilingual plane"
-else
-  echo "ERROR: HTTP GET is not accepting UTF-8 beyond the basic multilingual plane"
-fi
-
-curl $URL/select --data-binary "q=$URL_UTF8&echoParams=explicit&wt=python"  -H 'Content-type:application/x-www-form-urlencoded; charset=UTF-8' 2> /dev/null | grep $EXPECTED > /dev/null 2>&1
-if [ $? = 0 ]; then
-  echo "HTTP POST is accepting UTF-8 beyond the basic multilingual plane"
-else
-  echo "ERROR: HTTP POST is not accepting UTF-8 beyond the basic multilingual plane"
-fi
-
-curl "$URL/select?q=$URL_UTF8&echoParams=explicit&wt=python" --data-binary '' 2> /dev/null | grep $EXPECTED > /dev/null 2>&1
-if [ $? = 0 ]; then
-  echo "HTTP POST + URL params is accepting UTF-8 beyond the basic multilingual plane"
-else
-  echo "ERROR: HTTP POST + URL params is not accepting UTF-8 beyond the basic multilingual plane"
-fi
-
-#curl "$URL/select?q=$URL_UTF8&echoParams=explicit&wt=json" 2> /dev/null | od -tx1 -w1000 | sed 's/ //g' | grep 'f4808198' > /dev/null 2>&1
-curl "$URL/select?q=$URL_UTF8&echoParams=explicit&wt=json" 2> /dev/null | grep "$CHAR" > /dev/null 2>&1
-if [ $? = 0 ]; then
-  echo "Response correctly returns UTF-8 beyond the basic multilingual plane"
-else
-  echo "ERROR: Response can't return UTF-8 beyond the basic multilingual plane"
-fi
-
-

diff --git a/zookeeper/exampledocs/utf8-example.xml b/zookeeper/exampledocs/utf8-example.xml
deleted file mode 100644 (file)
index c9486b2..0000000
--- a/zookeeper/exampledocs/utf8-example.xml
+++ /dev/null
@@ -1,42 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- 
-  After posting this to SOLR with post.sh, searching for "êâîôû" from 
-  the solr/admin/ search page must return this document.
- -->
-
-<add>
-  <doc>
-    <field name="id">UTF8TEST</field>
-    <field name="name">Test with some UTF-8 encoded characters</field>
-    <field name="manu">Apache Software Foundation</field>
-    <field name="cat">software</field>
-    <field name="cat">search</field>
-    <field name="features">No accents here</field>
-    <field name="features">This is an e acute: é</field>
-    <field name="features">eaiou with circumflexes: êâîôû</field>
-    <field name="features">eaiou with umlauts: ëäïöü</field>
-    <field name="features">tag with escaped chars: &lt;nicetag/&gt;</field>
-    <field name="features">escaped ampersand: Bonnie &amp; Clyde</field>
-    <field name="features">Outside the BMP:𐌈 codepoint=10308, a circle with an x inside. UTF8=f0908c88 UTF16=d800 df08</field>
-    <field name="price">0</field>
-    <field name="inStock">true</field>
-  </doc>
-</add>
-

diff --git a/zookeeper/exampledocs/vidcard.xml b/zookeeper/exampledocs/vidcard.xml
deleted file mode 100644 (file)
index 10b8121..0000000
--- a/zookeeper/exampledocs/vidcard.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add>
-<doc>
-  <field name="id">EN7800GTX/2DHTV/256M</field>
-  <field name="name">ASUS Extreme N7800GTX/2DHTV (256 MB)</field>
-  <!-- Denormalized -->
-  <field name="manu">ASUS Computer Inc.</field>
-  <!-- Join -->
-  <field name="manu_id_s">asus</field>
-  <field name="cat">electronics</field>
-  <field name="cat">graphics card</field>
-  <field name="features">NVIDIA GeForce 7800 GTX GPU/VPU clocked at 486MHz</field>
-  <field name="features">256MB GDDR3 Memory clocked at 1.35GHz</field>
-  <field name="features">PCI Express x16</field>
-  <field name="features">Dual DVI connectors, HDTV out, video input</field>
-  <field name="features">OpenGL 2.0, DirectX 9.0</field>
-  <field name="weight">16</field>
-  <field name="price">479.95</field>
-  <field name="popularity">7</field>
-  <field name="store">40.7143,-74.006</field>
-  <field name="inStock">false</field>
-  <field name="manufacturedate_dt">2006-02-13T15:26:37Z/DAY</field>
-</doc>
-  <!-- yes, you can add more than one document at a time -->
-<doc>
-  <field name="id">100-435805</field>
-  <field name="name">ATI Radeon X1900 XTX 512 MB PCIE Video Card</field>
-  <field name="manu">ATI Technologies</field>
-  <!-- Join -->
-  <field name="manu_id_s">ati</field>
-  <field name="cat">electronics</field>
-  <field name="cat">graphics card</field>
-  <field name="features">ATI RADEON X1900 GPU/VPU clocked at 650MHz</field>
-  <field name="features">512MB GDDR3 SDRAM clocked at 1.55GHz</field>
-  <field name="features">PCI Express x16</field>
-  <field name="features">dual DVI, HDTV, svideo, composite out</field>
-  <field name="features">OpenGL 2.0, DirectX 9.0</field>
-  <field name="weight">48</field>
-  <field name="price">649.99</field>
-  <field name="popularity">7</field>
-  <field name="inStock">false</field>
-  <field name="manufacturedate_dt">2006-02-13T15:26:37Z/DAY</field>
-  <!-- NYC store -->
-  <field name="store">40.7143,-74.006</field>
-</doc>
-</add>

diff --git a/zookeeper/lib/ext/jcl-over-slf4j-1.6.6.jar b/zookeeper/lib/ext/jcl-over-slf4j-1.6.6.jar
deleted file mode 100644 (file)
index ab898c0..0000000
Binary files a/zookeeper/lib/ext/jcl-over-slf4j-1.6.6.jar and /dev/null differ

diff --git a/zookeeper/lib/ext/jul-to-slf4j-1.6.6.jar b/zookeeper/lib/ext/jul-to-slf4j-1.6.6.jar
deleted file mode 100644 (file)
index fa8640f..0000000
Binary files a/zookeeper/lib/ext/jul-to-slf4j-1.6.6.jar and /dev/null differ

diff --git a/zookeeper/lib/ext/log4j-1.2.16.jar b/zookeeper/lib/ext/log4j-1.2.16.jar
deleted file mode 100644 (file)
index 5429a90..0000000
Binary files a/zookeeper/lib/ext/log4j-1.2.16.jar and /dev/null differ

diff --git a/zookeeper/lib/ext/slf4j-api-1.6.6.jar b/zookeeper/lib/ext/slf4j-api-1.6.6.jar
deleted file mode 100644 (file)
index 4c03fa6..0000000
Binary files a/zookeeper/lib/ext/slf4j-api-1.6.6.jar and /dev/null differ

diff --git a/zookeeper/lib/ext/slf4j-log4j12-1.6.6.jar b/zookeeper/lib/ext/slf4j-log4j12-1.6.6.jar
deleted file mode 100644 (file)
index e72c2d6..0000000
Binary files a/zookeeper/lib/ext/slf4j-log4j12-1.6.6.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-continuation-8.1.10.v20130312.jar b/zookeeper/lib/jetty-continuation-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index c19fda2..0000000
Binary files a/zookeeper/lib/jetty-continuation-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-deploy-8.1.10.v20130312.jar b/zookeeper/lib/jetty-deploy-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index 986513b..0000000
Binary files a/zookeeper/lib/jetty-deploy-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-http-8.1.10.v20130312.jar b/zookeeper/lib/jetty-http-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index e0fecc5..0000000
Binary files a/zookeeper/lib/jetty-http-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-io-8.1.10.v20130312.jar b/zookeeper/lib/jetty-io-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index e686933..0000000
Binary files a/zookeeper/lib/jetty-io-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-jmx-8.1.10.v20130312.jar b/zookeeper/lib/jetty-jmx-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index 568afb3..0000000
Binary files a/zookeeper/lib/jetty-jmx-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-security-8.1.10.v20130312.jar b/zookeeper/lib/jetty-security-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index 4a3054e..0000000
Binary files a/zookeeper/lib/jetty-security-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-server-8.1.10.v20130312.jar b/zookeeper/lib/jetty-server-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index e563ec5..0000000
Binary files a/zookeeper/lib/jetty-server-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-servlet-8.1.10.v20130312.jar b/zookeeper/lib/jetty-servlet-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index 1f13d52..0000000
Binary files a/zookeeper/lib/jetty-servlet-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-util-8.1.10.v20130312.jar b/zookeeper/lib/jetty-util-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index 018b2ea..0000000
Binary files a/zookeeper/lib/jetty-util-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-webapp-8.1.10.v20130312.jar b/zookeeper/lib/jetty-webapp-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index c47b968..0000000
Binary files a/zookeeper/lib/jetty-webapp-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/jetty-xml-8.1.10.v20130312.jar b/zookeeper/lib/jetty-xml-8.1.10.v20130312.jar
deleted file mode 100644 (file)
index 039702f..0000000
Binary files a/zookeeper/lib/jetty-xml-8.1.10.v20130312.jar and /dev/null differ

diff --git a/zookeeper/lib/servlet-api-3.0.jar b/zookeeper/lib/servlet-api-3.0.jar
deleted file mode 100644 (file)
index b135409..0000000
Binary files a/zookeeper/lib/servlet-api-3.0.jar and /dev/null differ

diff --git a/zookeeper/multicore/README.txt b/zookeeper/multicore/README.txt
deleted file mode 100644 (file)
index eba1457..0000000
--- a/zookeeper/multicore/README.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-This is an alternative setup structure to support multiple cores.
-
-To run this configuration, start jetty in the example/ directory using:
-
-java -Dsolr.solr.home=multicore -jar start.jar
-
-For general examples on standard solr configuration, see the "solr" directory.

diff --git a/zookeeper/multicore/core0/conf/schema.xml b/zookeeper/multicore/core0/conf/schema.xml
deleted file mode 100644 (file)
index 7401b5b..0000000
--- a/zookeeper/multicore/core0/conf/schema.xml
+++ /dev/null
@@ -1,43 +0,0 @@
-<?xml version="1.0" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<schema name="example core zero" version="1.1">
-  <types>
-   <fieldtype name="string"  class="solr.StrField" sortMissingLast="true" omitNorms="true"/>
-   <fieldType name="long" class="solr.TrieLongField" precisionStep="0" positionIncrementGap="0"/>
-  </types>
-
- <fields>   
-  <!-- general -->
-  <field name="id"        type="string"   indexed="true"  stored="true"  multiValued="false" required="true"/>
-  <field name="type"      type="string"   indexed="true"  stored="true"  multiValued="false" /> 
-  <field name="name"      type="string"   indexed="true"  stored="true"  multiValued="false" /> 
-  <field name="core0"     type="string"   indexed="true"  stored="true"  multiValued="false" /> 
-  <field name="_version_" type="long"     indexed="true"  stored="true"/>
- </fields>
-
- <!-- field to use to determine and enforce document uniqueness. -->
- <uniqueKey>id</uniqueKey>
-
- <!-- field for the QueryParser to use when an explicit fieldname is absent -->
- <defaultSearchField>name</defaultSearchField>
-
- <!-- SolrQueryParser configuration: defaultOperator="AND|OR" -->
- <solrQueryParser defaultOperator="OR"/>
-</schema>
-

diff --git a/zookeeper/multicore/core0/conf/solrconfig.xml b/zookeeper/multicore/core0/conf/solrconfig.xml
deleted file mode 100644 (file)
index 1eb29c6..0000000
--- a/zookeeper/multicore/core0/conf/solrconfig.xml
+++ /dev/null
@@ -1,95 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!--
- This is a stripped down config file used for a simple example...  
- It is *not* a good example to work from. 
--->
-<config>
-  <luceneMatchVersion>4.4</luceneMatchVersion>
-  <!--  The DirectoryFactory to use for indexes.
-        solr.StandardDirectoryFactory, the default, is filesystem based.
-        solr.RAMDirectoryFactory is memory based, not persistent, and doesn't work with replication. -->
-  <directoryFactory name="DirectoryFactory" class="${solr.directoryFactory:solr.StandardDirectoryFactory}"/>
-
-  <dataDir>${solr.core0.data.dir:}</dataDir>
-
-  <!-- To enable dynamic schema REST APIs, use the following for <schemaFactory>:
-  
-       <schemaFactory class="ManagedIndexSchemaFactory">
-         <bool name="mutable">true</bool>
-         <str name="managedSchemaResourceName">managed-schema</str>
-       </schemaFactory>
-       
-       When ManagedIndexSchemaFactory is specified, Solr will load the schema from
-       he resource named in 'managedSchemaResourceName', rather than from schema.xml.
-       Note that the managed schema resource CANNOT be named schema.xml.  If the managed
-       schema does not exist, Solr will create it after reading schema.xml, then rename
-       'schema.xml' to 'schema.xml.bak'. 
-       
-       Do NOT hand edit the managed schema - external modifications will be ignored and
-       overwritten as a result of schema modification REST API calls.
-
-       When ManagedIndexSchemaFactory is specified with mutable = true, schema
-       modification REST API calls will be allowed; otherwise, error responses will be
-       sent back for these requests. 
-  -->
-  <schemaFactory class="ClassicIndexSchemaFactory"/>
-
-  <updateHandler class="solr.DirectUpdateHandler2">
-    <updateLog>
-      <str name="dir">${solr.core0.data.dir:}</str>
-    </updateLog>
-  </updateHandler>
-
-  <!-- realtime get handler, guaranteed to return the latest stored fields 
-    of any document, without the need to commit or open a new searcher. The current 
-    implementation relies on the updateLog feature being enabled. -->
-  <requestHandler name="/get" class="solr.RealTimeGetHandler">
-    <lst name="defaults">
-      <str name="omitHeader">true</str>
-    </lst>
-  </requestHandler>  
-  
-  <requestHandler name="/replication" class="solr.ReplicationHandler" startup="lazy" /> 
-
-  <requestDispatcher handleSelect="true" >
-    <requestParsers enableRemoteStreaming="false" multipartUploadLimitInKB="2048" formdataUploadLimitInKB="2048" />
-  </requestDispatcher>
-  
-  <requestHandler name="standard" class="solr.StandardRequestHandler" default="true" />
-  <requestHandler name="/analysis/field" startup="lazy" class="solr.FieldAnalysisRequestHandler" />
-  <requestHandler name="/update" class="solr.UpdateRequestHandler"  />
-  <requestHandler name="/admin/" class="org.apache.solr.handler.admin.AdminHandlers" />
-     
-  <requestHandler name="/admin/ping" class="solr.PingRequestHandler">
-    <lst name="invariants">
-      <str name="q">solrpingquery</str>
-    </lst>
-    <lst name="defaults">
-      <str name="echoParams">all</str>
-    </lst>
-  </requestHandler>
-   
-  <!-- config for the admin interface --> 
-  <admin>
-    <defaultQuery>solr</defaultQuery>
-  </admin>
-
-</config>
-

diff --git a/zookeeper/multicore/core1/conf/schema.xml b/zookeeper/multicore/core1/conf/schema.xml
deleted file mode 100644 (file)
index 5a27d39..0000000
--- a/zookeeper/multicore/core1/conf/schema.xml
+++ /dev/null
@@ -1,43 +0,0 @@
-<?xml version="1.0" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<schema name="example core one" version="1.1">
-  <types>
-   <fieldtype name="string"  class="solr.StrField" sortMissingLast="true" omitNorms="true"/>
-   <fieldType name="long" class="solr.TrieLongField" precisionStep="0" positionIncrementGap="0"/>
-  </types>
-
- <fields>   
-  <!-- general -->
-  <field name="id"        type="string"    indexed="true"  stored="true"  multiValued="false" required="true"/>
-  <field name="type"      type="string"    indexed="true"  stored="true"  multiValued="false" /> 
-  <field name="name"      type="string"    indexed="true"  stored="true"  multiValued="false" /> 
-  <field name="core1"     type="string"    indexed="true"  stored="true"  multiValued="false" />
-  <field name="_version_" type="long"      indexed="true"  stored="true"/>
- </fields>
-
- <!-- field to use to determine and enforce document uniqueness. -->
- <uniqueKey>id</uniqueKey>
-
- <!-- field for the QueryParser to use when an explicit fieldname is absent -->
- <defaultSearchField>name</defaultSearchField>
-
- <!-- SolrQueryParser configuration: defaultOperator="AND|OR" -->
- <solrQueryParser defaultOperator="OR"/>
-</schema>
-

diff --git a/zookeeper/multicore/core1/conf/solrconfig.xml b/zookeeper/multicore/core1/conf/solrconfig.xml
deleted file mode 100644 (file)
index c0aff09..0000000
--- a/zookeeper/multicore/core1/conf/solrconfig.xml
+++ /dev/null
@@ -1,95 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!--
- This is a stripped down config file used for a simple example...  
- It is *not* a good example to work from. 
--->
-<config>
-  <luceneMatchVersion>4.4</luceneMatchVersion>
-  <!--  The DirectoryFactory to use for indexes.
-        solr.StandardDirectoryFactory, the default, is filesystem based.
-        solr.RAMDirectoryFactory is memory based, not persistent, and doesn't work with replication. -->
-  <directoryFactory name="DirectoryFactory" class="${solr.directoryFactory:solr.StandardDirectoryFactory}"/>
-
-  <dataDir>${solr.core1.data.dir:}</dataDir>
-
-  <!-- To enable dynamic schema REST APIs, use the following for <schemaFactory>:
-  
-       <schemaFactory class="ManagedIndexSchemaFactory">
-         <bool name="mutable">true</bool>
-         <str name="managedSchemaResourceName">managed-schema</str>
-       </schemaFactory>
-       
-       When ManagedIndexSchemaFactory is specified, Solr will load the schema from
-       he resource named in 'managedSchemaResourceName', rather than from schema.xml.
-       Note that the managed schema resource CANNOT be named schema.xml.  If the managed
-       schema does not exist, Solr will create it after reading schema.xml, then rename
-       'schema.xml' to 'schema.xml.bak'. 
-       
-       Do NOT hand edit the managed schema - external modifications will be ignored and
-       overwritten as a result of schema modification REST API calls.
-
-       When ManagedIndexSchemaFactory is specified with mutable = true, schema
-       modification REST API calls will be allowed; otherwise, error responses will be
-       sent back for these requests. 
-  -->
-  <schemaFactory class="ClassicIndexSchemaFactory"/>
-
-  <updateHandler class="solr.DirectUpdateHandler2">
-    <updateLog>
-      <str name="dir">${solr.core1.data.dir:}</str>
-    </updateLog>
-  </updateHandler>
-
-  <!-- realtime get handler, guaranteed to return the latest stored fields 
-    of any document, without the need to commit or open a new searcher. The current 
-    implementation relies on the updateLog feature being enabled. -->
-  <requestHandler name="/get" class="solr.RealTimeGetHandler">
-    <lst name="defaults">
-      <str name="omitHeader">true</str>
-    </lst>
-  </requestHandler>
-  
-  <requestHandler name="/replication" class="solr.ReplicationHandler" startup="lazy" /> 
-
-  <requestDispatcher handleSelect="true" >
-    <requestParsers enableRemoteStreaming="false" multipartUploadLimitInKB="2048" formdataUploadLimitInKB="2048" />
-  </requestDispatcher>
-  
-  <requestHandler name="standard" class="solr.StandardRequestHandler" default="true" />
-  <requestHandler name="/analysis/field" startup="lazy" class="solr.FieldAnalysisRequestHandler" />
-  <requestHandler name="/update" class="solr.UpdateRequestHandler"  />
-  <requestHandler name="/admin/" class="org.apache.solr.handler.admin.AdminHandlers" />
-
-  <requestHandler name="/admin/ping" class="solr.PingRequestHandler">
-    <lst name="invariants">
-      <str name="q">solrpingquery</str>
-    </lst>
-    <lst name="defaults">
-      <str name="echoParams">all</str>
-    </lst>
-  </requestHandler>
-
-  <!-- config for the admin interface --> 
-  <admin>
-    <defaultQuery>solr</defaultQuery>
-  </admin>
-
-</config>
-

diff --git a/zookeeper/multicore/exampledocs/ipod_other.xml b/zookeeper/multicore/exampledocs/ipod_other.xml
deleted file mode 100644 (file)
index 4bfa310..0000000
--- a/zookeeper/multicore/exampledocs/ipod_other.xml
+++ /dev/null
@@ -1,34 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add>
-
-<doc>
-  <field name="id">F8V7067-APL-KIT</field>
-  <field name="name">Belkin Mobile Power Cord for iPod w/ Dock</field>
-</doc>
-
-<doc>
-  <field name="id">IW-02</field>
-  <field name="name">iPod &amp; iPod Mini USB 2.0 Cable</field>
-</doc>
-
-
-</add>
-
-
-

diff --git a/zookeeper/multicore/exampledocs/ipod_video.xml b/zookeeper/multicore/exampledocs/ipod_video.xml
deleted file mode 100644 (file)
index 3547fd3..0000000
--- a/zookeeper/multicore/exampledocs/ipod_video.xml
+++ /dev/null
@@ -1,22 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<add><doc>
-  <field name="id">MA147LL/A</field>
-  <field name="name">Apple 60 GB iPod with Video Playback Black</field>
-
-</doc></add>

diff --git a/zookeeper/multicore/solr.xml b/zookeeper/multicore/solr.xml
deleted file mode 100644 (file)
index 2707901..0000000
--- a/zookeeper/multicore/solr.xml
+++ /dev/null
@@ -1,35 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!--
- All (relative) paths are relative to the installation path
-  
-  persistent: Save changes made via the API to this file
-  sharedLib: path to a lib directory that will be shared across all cores
--->
-<solr persistent="false">
-
-  <!--
-  adminPath: RequestHandler path to manage cores.  
-    If 'null' (or absent), cores will not be manageable via request handler
-  -->
-  <cores adminPath="/admin/cores" host="${host:}" hostPort="${jetty.port:8983}" hostContext="${hostContext:solr}">
-    <core name="core0" instanceDir="core0" />
-    <core name="core1" instanceDir="core1" />
-  </cores>
-</solr>

diff --git a/zookeeper/multicore/zoo.cfg b/zookeeper/multicore/zoo.cfg
deleted file mode 100644 (file)
index aea4518..0000000
--- a/zookeeper/multicore/zoo.cfg
+++ /dev/null
@@ -1,17 +0,0 @@
-# The number of milliseconds of each tick
-tickTime=2000
-# The number of ticks that the initial
-# synchronization phase can take
-initLimit=10
-# The number of ticks that can pass between
-# sending a request and getting an acknowledgement
-syncLimit=5
-
-# the directory where the snapshot is stored.
-# dataDir=/opt/zookeeper/data
-# NOTE: Solr defaults the dataDir to <solrHome>/zoo_data
-
-# the port at which the clients will connect
-# clientPort=2181
-# NOTE: Solr sets this based on zkRun / zkHost params
-

diff --git a/zookeeper/options b/zookeeper/options
deleted file mode 100644 (file)
index 0b7b07f..0000000
--- a/zookeeper/options
+++ /dev/null
@@ -1,8 +0,0 @@
-NAME="zk-lui-solr"
-HOST=localhost
-PID_FILE="./${NAME}.pid"
-LOG_FILE="./${NAME}.log"
-PORT=8983
-#ZKHOSTS=opencontent-solr.index:9983
-ZKRUN=yes
-BOOTSTRAP_CONF=./solr/collection1/conf

diff --git a/zookeeper/options_2 b/zookeeper/options_2
deleted file mode 100644 (file)
index bb3930f..0000000
--- a/zookeeper/options_2
+++ /dev/null
@@ -1,4 +0,0 @@
-OPTIONS="-Djetty.port=7500 -DzkHost=opencontent-solr.index:9983" 
-NAME=second
-PID_FILE="./${NAME}.pid"
-LOG_FILE="./${NAME}.log"

diff --git a/zookeeper/options_localhost b/zookeeper/options_localhost
deleted file mode 100644 (file)
index 25894d2..0000000
--- a/zookeeper/options_localhost
+++ /dev/null
@@ -1,7 +0,0 @@
-NAME="zk-lui-solr"
-HOST=localhost
-PID_FILE="./${NAME}.pid"
-LOG_FILE="./${NAME}.log"
-PORT=8983
-ZKRUN=yes
-BOOTSTRAP_CONF=./solr/collection1/conf

diff --git a/zookeeper/options_localhost_second b/zookeeper/options_localhost_second
deleted file mode 100644 (file)
index a62a84e..0000000
--- a/zookeeper/options_localhost_second
+++ /dev/null
@@ -1,8 +0,0 @@
-NAME="zk-lui-solr-second"
-HOST=localhost
-PID_FILE="./${NAME}.pid"
-LOG_FILE="./${NAME}.log"
-PORT=8984
-ZKHOSTS=localhost:9983
-#BOOTSTRAP_CONF=./solr/collection1/conf
-ZOOKEEPER=no

diff --git a/zookeeper/resources/log4j.properties b/zookeeper/resources/log4j.properties
deleted file mode 100644 (file)
index f33fa71..0000000
--- a/zookeeper/resources/log4j.properties
+++ /dev/null
@@ -1,24 +0,0 @@
-#  Logging level
-solr.log=logs/
-log4j.rootLogger=INFO, file, CONSOLE
-
-log4j.appender.CONSOLE=org.apache.log4j.ConsoleAppender
-
-log4j.appender.CONSOLE.layout=org.apache.log4j.PatternLayout
-log4j.appender.CONSOLE.layout.ConversionPattern=%-4r [%t] %-5p %c %x \u2013 %m%n
-
-#- size rotation with log cleanup.
-log4j.appender.file=org.apache.log4j.RollingFileAppender
-log4j.appender.file.MaxFileSize=4MB
-log4j.appender.file.MaxBackupIndex=9
-
-#- File to log to and log format
-log4j.appender.file.File=${solr.log}/solr.log
-log4j.appender.file.layout=org.apache.log4j.PatternLayout
-log4j.appender.file.layout.ConversionPattern=%-5p - %d{yyyy-MM-dd HH:mm:ss.SSS}; %C; %m\n
-
-log4j.logger.org.apache.zookeeper=WARN
-log4j.logger.org.apache.hadoop=WARN
-
-# set to INFO to enable infostream log messages
-log4j.logger.org.apache.solr.update.LoggingInfoStream=OFF

diff --git a/zookeeper/solr/README.txt b/zookeeper/solr/README.txt
deleted file mode 100644 (file)
index 64d7c41..0000000
--- a/zookeeper/solr/README.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-Example Solr Home Directory
-=============================
-
-This directory is provided as an example of what a "Solr Home" directory
-should look like.
-
-It's not strictly necessary that you copy all of the files in this
-directory when setting up a new instance of Solr, but it is recommended.
-
-
-Basic Directory Structure
--------------------------
-
-The Solr Home directory typically contains the following...
-
-* solr.xml *
-
-This is the primary configuration file Solr looks for when starting.
-This file specifies the list of "SolrCores" it should load, and high 
-level configuration options that should be used for all SolrCores.
-
-Please see the comments in ./solr.xml for more details.
-
-If no solr.xml file is found, then Solr assumes that there should be
-a single SolrCore named "collection1" and that the "Instance Directory" 
-for collection1 should be the same as the Solr Home Directory.
-
-* Individual SolrCore Instance Directories *
-
-Although solr.xml can be configured to look for SolrCore Instance Directories 
-in any path, simple sub-directories of the Solr Home Dir using relative paths 
-are common for many installations.  In this directory you can see the 
-"./collection1" Instance Directory.
-
-* A Shared 'lib' Directory *
-
-Although solr.xml can be configured with an optional "sharedLib" attribute 
-that can point to any path, it is common to use a "./lib" sub-directory of the 
-Solr Home Directory.
-
-* ZooKeeper Files *
-
-When using SolrCloud using the embedded ZooKeeper option for Solr, it is 
-common to have a "zoo.cfg" file and "zoo_data" directories in the Solr Home 
-Directory.  Please see the SolrCloud wiki page for more details...
-
-https://wiki.apache.org/solr/SolrCloud

diff --git a/zookeeper/solr/collection1/README.txt b/zookeeper/solr/collection1/README.txt
deleted file mode 100644 (file)
index 337d55b..0000000
--- a/zookeeper/solr/collection1/README.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-Example SolrCore Instance Directory
-=============================
-
-This directory is provided as an example of what an "Instance Directory"
-should look like for a SolrCore
-
-It's not strictly necessary that you copy all of the files in this
-directory when setting up a new SolrCores, but it is recommended.
-
-
-Basic Directory Structure
--------------------------
-
-The Solr Home directory typically contains the following sub-directories...
-
-   conf/
-        This directory is mandatory and must contain your solrconfig.xml
-        and schema.xml.  Any other optional configuration files would also 
-        be kept here.
-
-   data/
-        This directory is the default location where Solr will keep your
-        index, and is used by the replication scripts for dealing with
-        snapshots.  You can override this location in the 
-        conf/solrconfig.xml.  Solr will create this directory if it does not 
-        already exist.
-
-   lib/
-        This directory is optional.  If it exists, Solr will load any Jars
-        found in this directory and use them to resolve any "plugins"
-        specified in your solrconfig.xml or schema.xml (ie: Analyzers,
-        Request Handlers, etc...).  Alternatively you can use the <lib>
-        syntax in conf/solrconfig.xml to direct Solr to your plugins.  See 
-        the example conf/solrconfig.xml file for details.

diff --git a/zookeeper/solr/collection1/conf/admin-extra.html b/zookeeper/solr/collection1/conf/admin-extra.html
deleted file mode 100644 (file)
index fecab20..0000000
--- a/zookeeper/solr/collection1/conf/admin-extra.html
+++ /dev/null
@@ -1,24 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- The content of this page will be statically included into the top-
-right box of the cores overview page. Uncomment this as an example to 
-see there the content will show up.
-
-<img src="img/ico/construction.png"> This line will appear at the top-
-right box on collection1's Overview
--->

diff --git a/zookeeper/solr/collection1/conf/admin-extra.menu-bottom.html b/zookeeper/solr/collection1/conf/admin-extra.menu-bottom.html
deleted file mode 100644 (file)
index 3359a46..0000000
--- a/zookeeper/solr/collection1/conf/admin-extra.menu-bottom.html
+++ /dev/null
@@ -1,25 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- admin-extra.menu-bottom.html -->
-<!--
-<li>
-  <a href="#" style="background-image: url(img/ico/construction.png);">
-    LAST ITEM
-  </a>
-</li>
--->

diff --git a/zookeeper/solr/collection1/conf/admin-extra.menu-top.html b/zookeeper/solr/collection1/conf/admin-extra.menu-top.html
deleted file mode 100644 (file)
index 0886cee..0000000
--- a/zookeeper/solr/collection1/conf/admin-extra.menu-top.html
+++ /dev/null
@@ -1,25 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- admin-extra.menu-top.html -->
-<!--
-<li>
-  <a href="#" style="background-image: url(img/ico/construction.png);">
-    FIRST ITEM
-  </a>
-</li>
--->

diff --git a/zookeeper/solr/collection1/conf/currency.xml b/zookeeper/solr/collection1/conf/currency.xml
deleted file mode 100644 (file)
index 3a9c58a..0000000
--- a/zookeeper/solr/collection1/conf/currency.xml
+++ /dev/null
@@ -1,67 +0,0 @@
-<?xml version="1.0" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- Example exchange rates file for CurrencyField type named "currency" in example schema -->
-
-<currencyConfig version="1.0">
-  <rates>
-    <!-- Updated from http://www.exchangerate.com/ at 2011-09-27 -->
-    <rate from="USD" to="ARS" rate="4.333871" comment="ARGENTINA Peso" />
-    <rate from="USD" to="AUD" rate="1.025768" comment="AUSTRALIA Dollar" />
-    <rate from="USD" to="EUR" rate="0.743676" comment="European Euro" />
-    <rate from="USD" to="BRL" rate="1.881093" comment="BRAZIL Real" />
-    <rate from="USD" to="CAD" rate="1.030815" comment="CANADA Dollar" />
-    <rate from="USD" to="CLP" rate="519.0996" comment="CHILE Peso" />
-    <rate from="USD" to="CNY" rate="6.387310" comment="CHINA Yuan" />
-    <rate from="USD" to="CZK" rate="18.47134" comment="CZECH REP. Koruna" />
-    <rate from="USD" to="DKK" rate="5.515436" comment="DENMARK Krone" />
-    <rate from="USD" to="HKD" rate="7.801922" comment="HONG KONG Dollar" />
-    <rate from="USD" to="HUF" rate="215.6169" comment="HUNGARY Forint" />
-    <rate from="USD" to="ISK" rate="118.1280" comment="ICELAND Krona" />
-    <rate from="USD" to="INR" rate="49.49088" comment="INDIA Rupee" />
-    <rate from="USD" to="XDR" rate="0.641358" comment="INTNL MON. FUND SDR" />
-    <rate from="USD" to="ILS" rate="3.709739" comment="ISRAEL Sheqel" />
-    <rate from="USD" to="JPY" rate="76.32419" comment="JAPAN Yen" />
-    <rate from="USD" to="KRW" rate="1169.173" comment="KOREA (SOUTH) Won" />
-    <rate from="USD" to="KWD" rate="0.275142" comment="KUWAIT Dinar" />
-    <rate from="USD" to="MXN" rate="13.85895" comment="MEXICO Peso" />
-    <rate from="USD" to="NZD" rate="1.285159" comment="NEW ZEALAND Dollar" />
-    <rate from="USD" to="NOK" rate="5.859035" comment="NORWAY Krone" />
-    <rate from="USD" to="PKR" rate="87.57007" comment="PAKISTAN Rupee" />
-    <rate from="USD" to="PEN" rate="2.730683" comment="PERU Sol" />
-    <rate from="USD" to="PHP" rate="43.62039" comment="PHILIPPINES Peso" />
-    <rate from="USD" to="PLN" rate="3.310139" comment="POLAND Zloty" />
-    <rate from="USD" to="RON" rate="3.100932" comment="ROMANIA Leu" />
-    <rate from="USD" to="RUB" rate="32.14663" comment="RUSSIA Ruble" />
-    <rate from="USD" to="SAR" rate="3.750465" comment="SAUDI ARABIA Riyal" />
-    <rate from="USD" to="SGD" rate="1.299352" comment="SINGAPORE Dollar" />
-    <rate from="USD" to="ZAR" rate="8.329761" comment="SOUTH AFRICA Rand" />
-    <rate from="USD" to="SEK" rate="6.883442" comment="SWEDEN Krona" />
-    <rate from="USD" to="CHF" rate="0.906035" comment="SWITZERLAND Franc" />
-    <rate from="USD" to="TWD" rate="30.40283" comment="TAIWAN Dollar" />
-    <rate from="USD" to="THB" rate="30.89487" comment="THAILAND Baht" />
-    <rate from="USD" to="AED" rate="3.672955" comment="U.A.E. Dirham" />
-    <rate from="USD" to="UAH" rate="7.988582" comment="UKRAINE Hryvnia" />
-    <rate from="USD" to="GBP" rate="0.647910" comment="UNITED KINGDOM Pound" />
-    
-    <!-- Cross-rates for some common currencies -->
-    <rate from="EUR" to="GBP" rate="0.869914" />  
-    <rate from="EUR" to="NOK" rate="7.800095" />  
-    <rate from="GBP" to="NOK" rate="8.966508" />  
-  </rates>
-</currencyConfig>

diff --git a/zookeeper/solr/collection1/conf/elevate.xml b/zookeeper/solr/collection1/conf/elevate.xml
deleted file mode 100644 (file)
index 25d5ceb..0000000
--- a/zookeeper/solr/collection1/conf/elevate.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- If this file is found in the config directory, it will only be
-     loaded once at startup.  If it is found in Solr's data
-     directory, it will be re-loaded every commit.
-
-   See http://wiki.apache.org/solr/QueryElevationComponent for more info
-
--->
-<elevate>
- <query text="foo bar">
-  <doc id="1" />
-  <doc id="2" />
-  <doc id="3" />
- </query>
- 
- <query text="ipod">
-   <doc id="MA147LL/A" />  <!-- put the actual ipod at the top -->
-   <doc id="IW-02" exclude="true" /> <!-- exclude this cable -->
- </query>
- 
-</elevate>

diff --git a/zookeeper/solr/collection1/conf/lang/contractions_ca.txt b/zookeeper/solr/collection1/conf/lang/contractions_ca.txt
deleted file mode 100644 (file)
index 307a85f..0000000
--- a/zookeeper/solr/collection1/conf/lang/contractions_ca.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-# Set of Catalan contractions for ElisionFilter
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-d
-l
-m
-n
-s
-t

diff --git a/zookeeper/solr/collection1/conf/lang/contractions_fr.txt b/zookeeper/solr/collection1/conf/lang/contractions_fr.txt
deleted file mode 100644 (file)
index f1bba51..0000000
--- a/zookeeper/solr/collection1/conf/lang/contractions_fr.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-# Set of French contractions for ElisionFilter
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-l
-m
-t
-qu
-n
-s
-j
-d
-c
-jusqu
-quoiqu
-lorsqu
-puisqu

diff --git a/zookeeper/solr/collection1/conf/lang/contractions_ga.txt b/zookeeper/solr/collection1/conf/lang/contractions_ga.txt
deleted file mode 100644 (file)
index 9ebe7fa..0000000
--- a/zookeeper/solr/collection1/conf/lang/contractions_ga.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-# Set of Irish contractions for ElisionFilter
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-d
-m
-b

diff --git a/zookeeper/solr/collection1/conf/lang/contractions_it.txt b/zookeeper/solr/collection1/conf/lang/contractions_it.txt
deleted file mode 100644 (file)
index cac0409..0000000
--- a/zookeeper/solr/collection1/conf/lang/contractions_it.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-# Set of Italian contractions for ElisionFilter
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-c
-l 
-all 
-dall 
-dell 
-nell 
-sull 
-coll 
-pell 
-gl 
-agl 
-dagl 
-degl 
-negl 
-sugl 
-un 
-m 
-t 
-s 
-v 
-d

diff --git a/zookeeper/solr/collection1/conf/lang/hyphenations_ga.txt b/zookeeper/solr/collection1/conf/lang/hyphenations_ga.txt
deleted file mode 100644 (file)
index 4d2642c..0000000
--- a/zookeeper/solr/collection1/conf/lang/hyphenations_ga.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-# Set of Irish hyphenations for StopFilter
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-h
-n
-t

diff --git a/zookeeper/solr/collection1/conf/lang/stemdict_nl.txt b/zookeeper/solr/collection1/conf/lang/stemdict_nl.txt
deleted file mode 100644 (file)
index 4410729..0000000
--- a/zookeeper/solr/collection1/conf/lang/stemdict_nl.txt
+++ /dev/null
@@ -1,6 +0,0 @@
-# Set of overrides for the dutch stemmer
-# TODO: load this as a resource from the analyzer and sync it in build.xml
-fiets  fiets
-bromfiets      bromfiets
-ei     eier
-kind   kinder

diff --git a/zookeeper/solr/collection1/conf/lang/stoptags_ja.txt b/zookeeper/solr/collection1/conf/lang/stoptags_ja.txt
deleted file mode 100644 (file)
index 71b7508..0000000
--- a/zookeeper/solr/collection1/conf/lang/stoptags_ja.txt
+++ /dev/null
@@ -1,420 +0,0 @@
-#
-# This file defines a Japanese stoptag set for JapanesePartOfSpeechStopFilter.
-#
-# Any token with a part-of-speech tag that exactly matches those defined in this
-# file are removed from the token stream.
-#
-# Set your own stoptags by uncommenting the lines below.  Note that comments are
-# not allowed on the same line as a stoptag.  See LUCENE-3745 for frequency lists,
-# etc. that can be useful for building you own stoptag set.
-#
-# The entire possible tagset is provided below for convenience.
-#
-#####
-#  noun: unclassified nouns
-#名詞
-#
-#  noun-common: Common nouns or nouns where the sub-classification is undefined
-#名詞-一般
-#
-#  noun-proper: Proper nouns where the sub-classification is undefined 
-#名詞-固有名詞
-#
-#  noun-proper-misc: miscellaneous proper nouns
-#名詞-固有名詞-一般
-#
-#  noun-proper-person: Personal names where the sub-classification is undefined
-#名詞-固有名詞-人名
-#
-#  noun-proper-person-misc: names that cannot be divided into surname and 
-#  given name; foreign names; names where the surname or given name is unknown.
-#  e.g. お市の方
-#名詞-固有名詞-人名-一般
-#
-#  noun-proper-person-surname: Mainly Japanese surnames.
-#  e.g. 山田
-#名詞-固有名詞-人名-姓
-#
-#  noun-proper-person-given_name: Mainly Japanese given names.
-#  e.g. 太郎
-#名詞-固有名詞-人名-名
-#
-#  noun-proper-organization: Names representing organizations.
-#  e.g. 通産省, NHK
-#名詞-固有名詞-組織
-#
-#  noun-proper-place: Place names where the sub-classification is undefined
-#名詞-固有名詞-地域
-#
-#  noun-proper-place-misc: Place names excluding countries.
-#  e.g. アジア, バルセロナ, 京都
-#名詞-固有名詞-地域-一般
-#
-#  noun-proper-place-country: Country names. 
-#  e.g. 日本, オーストラリア
-#名詞-固有名詞-地域-国
-#
-#  noun-pronoun: Pronouns where the sub-classification is undefined
-#名詞-代名詞
-#
-#  noun-pronoun-misc: miscellaneous pronouns: 
-#  e.g. それ, ここ, あいつ, あなた, あちこち, いくつ, どこか, なに, みなさん, みんな, わたくし, われわれ
-#名詞-代名詞-一般
-#
-#  noun-pronoun-contraction: Spoken language contraction made by combining a 
-#  pronoun and the particle 'wa'.
-#  e.g. ありゃ, こりゃ, こりゃあ, そりゃ, そりゃあ 
-#名詞-代名詞-縮約
-#
-#  noun-adverbial: Temporal nouns such as names of days or months that behave 
-#  like adverbs. Nouns that represent amount or ratios and can be used adverbially,
-#  e.g. 金曜, 一月, 午後, 少量
-#名詞-副詞可能
-#
-#  noun-verbal: Nouns that take arguments with case and can appear followed by 
-#  'suru' and related verbs (する, できる, なさる, くださる)
-#  e.g. インプット, 愛着, 悪化, 悪戦苦闘, 一安心, 下取り
-#名詞-サ変接続
-#
-#  noun-adjective-base: The base form of adjectives, words that appear before な ("na")
-#  e.g. 健康, 安易, 駄目, だめ
-#名詞-形容動詞語幹
-#
-#  noun-numeric: Arabic numbers, Chinese numerals, and counters like 何 (回), 数.
-#  e.g. 0, 1, 2, 何, 数, 幾
-#名詞-数
-#
-#  noun-affix: noun affixes where the sub-classification is undefined
-#名詞-非自立
-#
-#  noun-affix-misc: Of adnominalizers, the case-marker の ("no"), and words that 
-#  attach to the base form of inflectional words, words that cannot be classified 
-#  into any of the other categories below. This category includes indefinite nouns.
-#  e.g. あかつき, 暁, かい, 甲斐, 気, きらい, 嫌い, くせ, 癖, こと, 事, ごと, 毎, しだい, 次第, 
-#       順, せい, 所為, ついで, 序で, つもり, 積もり, 点, どころ, の, はず, 筈, はずみ, 弾み, 
-#       拍子, ふう, ふり, 振り, ほう, 方, 旨, もの, 物, 者, ゆえ, 故, ゆえん, 所以, わけ, 訳,
-#       わり, 割り, 割, ん-口語/, もん-口語/
-#名詞-非自立-一般
-#
-#  noun-affix-adverbial: noun affixes that that can behave as adverbs.
-#  e.g. あいだ, 間, あげく, 挙げ句, あと, 後, 余り, 以外, 以降, 以後, 以上, 以前, 一方, うえ, 
-#       上, うち, 内, おり, 折り, かぎり, 限り, きり, っきり, 結果, ころ, 頃, さい, 際, 最中, さなか, 
-#       最中, じたい, 自体, たび, 度, ため, 為, つど, 都度, とおり, 通り, とき, 時, ところ, 所, 
-#       とたん, 途端, なか, 中, のち, 後, ばあい, 場合, 日, ぶん, 分, ほか, 他, まえ, 前, まま, 
-#       儘, 侭, みぎり, 矢先
-#名詞-非自立-副詞可能
-#
-#  noun-affix-aux: noun affixes treated as 助動詞 ("auxiliary verb") in school grammars 
-#  with the stem よう(だ) ("you(da)").
-#  e.g.  よう, やう, 様 (よう)
-#名詞-非自立-助動詞語幹
-#  
-#  noun-affix-adjective-base: noun affixes that can connect to the indeclinable
-#  connection form な (aux "da").
-#  e.g. みたい, ふう
-#名詞-非自立-形容動詞語幹
-#
-#  noun-special: special nouns where the sub-classification is undefined.
-#名詞-特殊
-#
-#  noun-special-aux: The そうだ ("souda") stem form that is used for reporting news, is 
-#  treated as 助動詞 ("auxiliary verb") in school grammars, and attach to the base 
-#  form of inflectional words.
-#  e.g. そう
-#名詞-特殊-助動詞語幹
-#
-#  noun-suffix: noun suffixes where the sub-classification is undefined.
-#名詞-接尾
-#
-#  noun-suffix-misc: Of the nouns or stem forms of other parts of speech that connect 
-#  to ガル or タイ and can combine into compound nouns, words that cannot be classified into
-#  any of the other categories below. In general, this category is more inclusive than 
-#  接尾語 ("suffix") and is usually the last element in a compound noun.
-#  e.g. おき, かた, 方, 甲斐 (がい), がかり, ぎみ, 気味, ぐるみ, (～した) さ, 次第, 済 (ず) み,
-#       よう, (でき)っこ, 感, 観, 性, 学, 類, 面, 用
-#名詞-接尾-一般
-#
-#  noun-suffix-person: Suffixes that form nouns and attach to person names more often
-#  than other nouns.
-#  e.g. 君, 様, 著
-#名詞-接尾-人名
-#
-#  noun-suffix-place: Suffixes that form nouns and attach to place names more often 
-#  than other nouns.
-#  e.g. 町, 市, 県
-#名詞-接尾-地域
-#
-#  noun-suffix-verbal: Of the suffixes that attach to nouns and form nouns, those that 
-#  can appear before スル ("suru").
-#  e.g. 化, 視, 分け, 入り, 落ち, 買い
-#名詞-接尾-サ変接続
-#
-#  noun-suffix-aux: The stem form of そうだ (様態) that is used to indicate conditions, 
-#  is treated as 助動詞 ("auxiliary verb") in school grammars, and attach to the 
-#  conjunctive form of inflectional words.
-#  e.g. そう
-#名詞-接尾-助動詞語幹
-#
-#  noun-suffix-adjective-base: Suffixes that attach to other nouns or the conjunctive 
-#  form of inflectional words and appear before the copula だ ("da").
-#  e.g. 的, げ, がち
-#名詞-接尾-形容動詞語幹
-#
-#  noun-suffix-adverbial: Suffixes that attach to other nouns and can behave as adverbs.
-#  e.g. 後 (ご), 以後, 以降, 以前, 前後, 中, 末, 上, 時 (じ)
-#名詞-接尾-副詞可能
-#
-#  noun-suffix-classifier: Suffixes that attach to numbers and form nouns. This category 
-#  is more inclusive than 助数詞 ("classifier") and includes common nouns that attach 
-#  to numbers.
-#  e.g. 個, つ, 本, 冊, パーセント, cm, kg, カ月, か国, 区画, 時間, 時半
-#名詞-接尾-助数詞
-#
-#  noun-suffix-special: Special suffixes that mainly attach to inflecting words.
-#  e.g. (楽し) さ, (考え) 方
-#名詞-接尾-特殊
-#
-#  noun-suffix-conjunctive: Nouns that behave like conjunctions and join two words 
-#  together.
-#  e.g. (日本) 対 (アメリカ), 対 (アメリカ), (3) 対 (5), (女優) 兼 (主婦)
-#名詞-接続詞的
-#
-#  noun-verbal_aux: Nouns that attach to the conjunctive particle て ("te") and are 
-#  semantically verb-like.
-#  e.g. ごらん, ご覧, 御覧, 頂戴
-#名詞-動詞非自立的
-#
-#  noun-quotation: text that cannot be segmented into words, proverbs, Chinese poetry, 
-#  dialects, English, etc. Currently, the only entry for 名詞 引用文字列 ("noun quotation") 
-#  is いわく ("iwaku").
-#名詞-引用文字列
-#
-#  noun-nai_adjective: Words that appear before the auxiliary verb ない ("nai") and
-#  behave like an adjective.
-#  e.g. 申し訳, 仕方, とんでも, 違い
-#名詞-ナイ形容詞語幹
-#
-#####
-#  prefix: unclassified prefixes
-#接頭詞
-#
-#  prefix-nominal: Prefixes that attach to nouns (including adjective stem forms) 
-#  excluding numerical expressions.
-#  e.g. お (水), 某 (氏), 同 (社), 故 (～氏), 高 (品質), お (見事), ご (立派)
-#接頭詞-名詞接続
-#
-#  prefix-verbal: Prefixes that attach to the imperative form of a verb or a verb
-#  in conjunctive form followed by なる/なさる/くださる.
-#  e.g. お (読みなさい), お (座り)
-#接頭詞-動詞接続
-#
-#  prefix-adjectival: Prefixes that attach to adjectives.
-#  e.g. お (寒いですねえ), バカ (でかい)
-#接頭詞-形容詞接続
-#
-#  prefix-numerical: Prefixes that attach to numerical expressions.
-#  e.g. 約, およそ, 毎時
-#接頭詞-数接続
-#
-#####
-#  verb: unclassified verbs
-#動詞
-#
-#  verb-main:
-#動詞-自立
-#
-#  verb-auxiliary:
-#動詞-非自立
-#
-#  verb-suffix:
-#動詞-接尾
-#
-#####
-#  adjective: unclassified adjectives
-#形容詞
-#
-#  adjective-main:
-#形容詞-自立
-#
-#  adjective-auxiliary:
-#形容詞-非自立
-#
-#  adjective-suffix:
-#形容詞-接尾
-#
-#####
-#  adverb: unclassified adverbs
-#副詞
-#
-#  adverb-misc: Words that can be segmented into one unit and where adnominal 
-#  modification is not possible.
-#  e.g. あいかわらず, 多分
-#副詞-一般
-#
-#  adverb-particle_conjunction: Adverbs that can be followed by の, は, に, 
-#  な, する, だ, etc.
-#  e.g. こんなに, そんなに, あんなに, なにか, なんでも
-#副詞-助詞類接続
-#
-#####
-#  adnominal: Words that only have noun-modifying forms.
-#  e.g. この, その, あの, どの, いわゆる, なんらかの, 何らかの, いろんな, こういう, そういう, ああいう, 
-#       どういう, こんな, そんな, あんな, どんな, 大きな, 小さな, おかしな, ほんの, たいした, 
-#       「(, も) さる (ことながら)」, 微々たる, 堂々たる, 単なる, いかなる, 我が」「同じ, 亡き
-#連体詞
-#
-#####
-#  conjunction: Conjunctions that can occur independently.
-#  e.g. が, けれども, そして, じゃあ, それどころか
-接続詞
-#
-#####
-#  particle: unclassified particles.
-助詞
-#
-#  particle-case: case particles where the subclassification is undefined.
-助詞-格助詞
-#
-#  particle-case-misc: Case particles.
-#  e.g. から, が, で, と, に, へ, より, を, の, にて
-助詞-格助詞-一般
-#
-#  particle-case-quote: the "to" that appears after nouns, a person’s speech, 
-#  quotation marks, expressions of decisions from a meeting, reasons, judgements,
-#  conjectures, etc.
-#  e.g. ( だ) と (述べた.), ( である) と (して執行猶予...)
-助詞-格助詞-引用
-#
-#  particle-case-compound: Compounds of particles and verbs that mainly behave 
-#  like case particles.
-#  e.g. という, といった, とかいう, として, とともに, と共に, でもって, にあたって, に当たって, に当って,
-#       にあたり, に当たり, に当り, に当たる, にあたる, において, に於いて,に於て, における, に於ける, 
-#       にかけ, にかけて, にかんし, に関し, にかんして, に関して, にかんする, に関する, に際し, 
-#       に際して, にしたがい, に従い, に従う, にしたがって, に従って, にたいし, に対し, にたいして, 
-#       に対して, にたいする, に対する, について, につき, につけ, につけて, につれ, につれて, にとって,
-#       にとり, にまつわる, によって, に依って, に因って, により, に依り, に因り, による, に依る, に因る, 
-#       にわたって, にわたる, をもって, を以って, を通じ, を通じて, を通して, をめぐって, をめぐり, をめぐる,
-#       って-口語/, ちゅう-関西弁「という」/, (何) ていう (人)-口語/, っていう-口語/, といふ, とかいふ
-助詞-格助詞-連語
-#
-#  particle-conjunctive:
-#  e.g. から, からには, が, けれど, けれども, けど, し, つつ, て, で, と, ところが, どころか, とも, ども, 
-#       ながら, なり, ので, のに, ば, ものの, や ( した), やいなや, (ころん) じゃ(いけない)-口語/, 
-#       (行っ) ちゃ(いけない)-口語/, (言っ) たって (しかたがない)-口語/, (それがなく)ったって (平気)-口語/
-助詞-接続助詞
-#
-#  particle-dependency:
-#  e.g. こそ, さえ, しか, すら, は, も, ぞ
-助詞-係助詞
-#
-#  particle-adverbial:
-#  e.g. がてら, かも, くらい, 位, ぐらい, しも, (学校) じゃ(これが流行っている)-口語/, 
-#       (それ)じゃあ (よくない)-口語/, ずつ, (私) なぞ, など, (私) なり (に), (先生) なんか (大嫌い)-口語/,
-#       (私) なんぞ, (先生) なんて (大嫌い)-口語/, のみ, だけ, (私) だって-口語/, だに, 
-#       (彼)ったら-口語/, (お茶) でも (いかが), 等 (とう), (今後) とも, ばかり, ばっか-口語/, ばっかり-口語/,
-#       ほど, 程, まで, 迄, (誰) も (が)([助詞-格助詞] および [助詞-係助詞] の前に位置する「も」)
-助詞-副助詞
-#
-#  particle-interjective: particles with interjective grammatical roles.
-#  e.g. (松島) や
-助詞-間投助詞
-#
-#  particle-coordinate:
-#  e.g. と, たり, だの, だり, とか, なり, や, やら
-助詞-並立助詞
-#
-#  particle-final:
-#  e.g. かい, かしら, さ, ぜ, (だ)っけ-口語/, (とまってる) で-方言/, な, ナ, なあ-口語/, ぞ, ね, ネ, 
-#       ねぇ-口語/, ねえ-口語/, ねん-方言/, の, のう-口語/, や, よ, ヨ, よぉ-口語/, わ, わい-口語/
-助詞-終助詞
-#
-#  particle-adverbial/conjunctive/final: The particle "ka" when unknown whether it is 
-#  adverbial, conjunctive, or sentence final. For example:
-#       (a) 「A か B か」. Ex:「(国内で運用する) か,(海外で運用する) か (.)」
-#       (b) Inside an adverb phrase. Ex:「(幸いという) か (, 死者はいなかった.)」
-#           「(祈りが届いたせい) か (, 試験に合格した.)」
-#       (c) 「かのように」. Ex:「(何もなかった) か (のように振る舞った.)」
-#  e.g. か
-助詞-副助詞／並立助詞／終助詞
-#
-#  particle-adnominalizer: The "no" that attaches to nouns and modifies 
-#  non-inflectional words.
-助詞-連体化
-#
-#  particle-adnominalizer: The "ni" and "to" that appear following nouns and adverbs 
-#  that are giongo, giseigo, or gitaigo.
-#  e.g. に, と
-助詞-副詞化
-#
-#  particle-special: A particle that does not fit into one of the above classifications. 
-#  This includes particles that are used in Tanka, Haiku, and other poetry.
-#  e.g. かな, けむ, ( しただろう) に, (あんた) にゃ(わからん), (俺) ん (家)
-助詞-特殊
-#
-#####
-#  auxiliary-verb:
-助動詞
-#
-#####
-#  interjection: Greetings and other exclamations.
-#  e.g. おはよう, おはようございます, こんにちは, こんばんは, ありがとう, どうもありがとう, ありがとうございます, 
-#       いただきます, ごちそうさま, さよなら, さようなら, はい, いいえ, ごめん, ごめんなさい
-#感動詞
-#
-#####
-#  symbol: unclassified Symbols.
-記号
-#
-#  symbol-misc: A general symbol not in one of the categories below.
-#  e.g. [○◎@$〒→+]
-記号-一般
-#
-#  symbol-comma: Commas
-#  e.g. [,、]
-記号-読点
-#
-#  symbol-period: Periods and full stops.
-#  e.g. [.．。]
-記号-句点
-#
-#  symbol-space: Full-width whitespace.
-記号-空白
-#
-#  symbol-open_bracket:
-#  e.g. [({‘“『【]
-記号-括弧開
-#
-#  symbol-close_bracket:
-#  e.g. [)}’”』」】]
-記号-括弧閉
-#
-#  symbol-alphabetic:
-#記号-アルファベット
-#
-#####
-#  other: unclassified other
-#その他
-#
-#  other-interjection: Words that are hard to classify as noun-suffixes or 
-#  sentence-final particles.
-#  e.g. (だ)ァ
-その他-間投
-#
-#####
-#  filler: Aizuchi that occurs during a conversation or sounds inserted as filler.
-#  e.g. あの, うんと, えと
-フィラー
-#
-#####
-#  non-verbal: non-verbal sound.
-非言語音
-#
-#####
-#  fragment:
-#語断片
-#
-#####
-#  unknown: unknown part of speech.
-#未知語
-#
-##### End of file

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_ar.txt b/zookeeper/solr/collection1/conf/lang/stopwords_ar.txt
deleted file mode 100644 (file)
index 046829d..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_ar.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-# This file was created by Jacques Savoy and is distributed under the BSD license.
-# See http://members.unine.ch/jacques.savoy/clef/index.html.
-# Also see http://www.opensource.org/licenses/bsd-license.html
-# Cleaned on October 11, 2009 (not normalized, so use before normalization)
-# This means that when modifying this list, you might need to add some 
-# redundant entries, for example containing forms with both أ and ا
-من
-ومن
-منها
-منه
-في
-وفي
-فيها
-فيه
-و
-ف
-ثم
-او
-أو
-ب
-بها
-به
-ا
-أ
-اى
-اي
-أي
-أى
-لا
-ولا
-الا
-ألا
-إلا
-لكن
-ما
-وما
-كما
-فما
-عن
-مع
-اذا
-إذا
-ان
-أن
-إن
-انها
-أنها
-إنها
-انه
-أنه
-إنه
-بان
-بأن
-فان
-فأن
-وان
-وأن
-وإن
-التى
-التي
-الذى
-الذي
-الذين
-الى
-الي
-إلى
-إلي
-على
-عليها
-عليه
-اما
-أما
-إما
-ايضا
-أيضا
-كل
-وكل
-لم
-ولم
-لن
-ولن
-هى
-هي
-هو
-وهى
-وهي
-وهو
-فهى
-فهي
-فهو
-انت
-أنت
-لك
-لها
-له
-هذه
-هذا
-تلك
-ذلك
-هناك
-كانت
-كان
-يكون
-تكون
-وكانت
-وكان
-غير
-بعض
-قد
-نحو
-بين
-بينما
-منذ
-ضمن
-حيث
-الان
-الآن
-خلال
-بعد
-قبل
-حتى
-عند
-عندما
-لدى
-جميع

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_bg.txt b/zookeeper/solr/collection1/conf/lang/stopwords_bg.txt
deleted file mode 100644 (file)
index 1ae4ba2..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_bg.txt
+++ /dev/null
@@ -1,193 +0,0 @@
-# This file was created by Jacques Savoy and is distributed under the BSD license.
-# See http://members.unine.ch/jacques.savoy/clef/index.html.
-# Also see http://www.opensource.org/licenses/bsd-license.html
-а
-аз
-ако
-ала
-бе
-без
-беше
-би
-бил
-била
-били
-било
-близо
-бъдат
-бъде
-бяха
-в
-вас
-ваш
-ваша
-вероятно
-вече
-взема
-ви
-вие
-винаги
-все
-всеки
-всички
-всичко
-всяка
-във
-въпреки
-върху
-г
-ги
-главно
-го
-д
-да
-дали
-до
-докато
-докога
-дори
-досега
-доста
-е
-едва
-един
-ето
-за
-зад
-заедно
-заради
-засега
-затова
-защо
-защото
-и
-из
-или
-им
-има
-имат
-иска
-й
-каза
-как
-каква
-какво
-както
-какъв
-като
-кога
-когато
-което
-които
-кой
-който
-колко
-която
-къде
-където
-към
-ли
-м
-ме
-между
-мен
-ми
-мнозина
-мога
-могат
-може
-моля
-момента
-му
-н
-на
-над
-назад
-най
-направи
-напред
-например
-нас
-не
-него
-нея
-ни
-ние
-никой
-нито
-но
-някои
-някой
-няма
-обаче
-около
-освен
-особено
-от
-отгоре
-отново
-още
-пак
-по
-повече
-повечето
-под
-поне
-поради
-после
-почти
-прави
-пред
-преди
-през
-при
-пък
-първо
-с
-са
-само
-се
-сега
-си
-скоро
-след
-сме
-според
-сред
-срещу
-сте
-съм
-със
-също
-т
-тази
-така
-такива
-такъв
-там
-твой
-те
-тези
-ти
-тн
-то
-това
-тогава
-този
-той
-толкова
-точно
-трябва
-тук
-тъй
-тя
-тях
-у
-харесва
-ч
-че
-често
-чрез
-ще
-щом
-я

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_ca.txt b/zookeeper/solr/collection1/conf/lang/stopwords_ca.txt
deleted file mode 100644 (file)
index 3da65de..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_ca.txt
+++ /dev/null
@@ -1,220 +0,0 @@
-# Catalan stopwords from http://github.com/vcl/cue.language (Apache 2 Licensed)
-a
-abans
-ací
-ah
-així
-això
-al
-als
-aleshores
-algun
-alguna
-algunes
-alguns
-alhora
-allà
-allí
-allò
-altra
-altre
-altres
-amb
-ambdós
-ambdues
-apa
-aquell
-aquella
-aquelles
-aquells
-aquest
-aquesta
-aquestes
-aquests
-aquí
-baix
-cada
-cadascú
-cadascuna
-cadascunes
-cadascuns
-com
-contra
-d'un
-d'una
-d'unes
-d'uns
-dalt
-de
-del
-dels
-des
-després
-dins
-dintre
-donat
-doncs
-durant
-e
-eh
-el
-els
-em
-en
-encara
-ens
-entre
-érem
-eren
-éreu
-es
-és
-esta
-està
-estàvem
-estaven
-estàveu
-esteu
-et
-etc
-ets
-fins
-fora
-gairebé
-ha
-han
-has
-havia
-he
-hem
-heu
-hi 
-ho
-i
-igual
-iguals
-ja
-l'hi
-la
-les
-li
-li'n
-llavors
-m'he
-ma
-mal
-malgrat
-mateix
-mateixa
-mateixes
-mateixos
-me
-mentre
-més
-meu
-meus
-meva
-meves
-molt
-molta
-moltes
-molts
-mon
-mons
-n'he
-n'hi
-ne
-ni
-no
-nogensmenys
-només
-nosaltres
-nostra
-nostre
-nostres
-o
-oh
-oi
-on
-pas
-pel
-pels
-per
-però
-perquè
-poc 
-poca
-pocs
-poques
-potser
-propi
-qual
-quals
-quan
-quant 
-que
-què
-quelcom
-qui
-quin
-quina
-quines
-quins
-s'ha
-s'han
-sa
-semblant
-semblants
-ses
-seu 
-seus
-seva
-seva
-seves
-si
-sobre
-sobretot
-sóc
-solament
-sols
-son 
-són
-sons 
-sota
-sou
-t'ha
-t'han
-t'he
-ta
-tal
-també
-tampoc
-tan
-tant
-tanta
-tantes
-teu
-teus
-teva
-teves
-ton
-tons
-tot
-tota
-totes
-tots
-un
-una
-unes
-uns
-us
-va
-vaig
-vam
-van
-vas
-veu
-vosaltres
-vostra
-vostre
-vostres

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_cz.txt b/zookeeper/solr/collection1/conf/lang/stopwords_cz.txt
deleted file mode 100644 (file)
index 53c6097..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_cz.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-a
-s
-k
-o
-i
-u
-v
-z
-dnes
-cz
-tímto
-budeš
-budem
-byli
-jseš
-můj
-svým
-ta
-tomto
-tohle
-tuto
-tyto
-jej
-zda
-proč
-máte
-tato
-kam
-tohoto
-kdo
-kteří
-mi
-nám
-tom
-tomuto
-mít
-nic
-proto
-kterou
-byla
-toho
-protože
-asi
-ho
-naši
-napište
-re
-což
-tím
-takže
-svých
-její
-svými
-jste
-aj
-tu
-tedy
-teto
-bylo
-kde
-ke
-pravé
-ji
-nad
-nejsou
-či
-pod
-téma
-mezi
-přes
-ty
-pak
-vám
-ani
-když
-však
-neg
-jsem
-tento
-článku
-články
-aby
-jsme
-před
-pta
-jejich
-byl
-ještě
-až
-bez
-také
-pouze
-první
-vaše
-která
-nás
-nový
-tipy
-pokud
-může
-strana
-jeho
-své
-jiné
-zprávy
-nové
-není
-vás
-jen
-podle
-zde
-už
-být
-více
-bude
-již
-než
-který
-by
-které
-co
-nebo
-ten
-tak
-má
-při
-od
-po
-jsou
-jak
-další
-ale
-si
-se
-ve
-to
-jako
-za
-zpět
-ze
-do
-pro
-je
-na
-atd
-atp
-jakmile
-přičemž
-já
-on
-ona
-ono
-oni
-ony
-my
-vy
-jí
-ji
-mě
-mne
-jemu
-tomu
-těm
-těmu
-němu
-němuž
-jehož
-jíž
-jelikož
-jež
-jakož
-načež

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_da.txt b/zookeeper/solr/collection1/conf/lang/stopwords_da.txt
deleted file mode 100644 (file)
index a3ff5fe..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_da.txt
+++ /dev/null
@@ -1,108 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/danish/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Danish stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
- | This is a ranked list (commonest to rarest) of stopwords derived from
- | a large text sample.
-
-
-og           | and
-i            | in
-jeg          | I
-det          | that (dem. pronoun)/it (pers. pronoun)
-at           | that (in front of a sentence)/to (with infinitive)
-en           | a/an
-den          | it (pers. pronoun)/that (dem. pronoun)
-til          | to/at/for/until/against/by/of/into, more
-er           | present tense of "to be"
-som          | who, as
-på           | on/upon/in/on/at/to/after/of/with/for, on
-de           | they
-med          | with/by/in, along
-han          | he
-af           | of/by/from/off/for/in/with/on, off
-for          | at/for/to/from/by/of/ago, in front/before, because
-ikke         | not
-der          | who/which, there/those
-var          | past tense of "to be"
-mig          | me/myself
-sig          | oneself/himself/herself/itself/themselves
-men          | but
-et           | a/an/one, one (number), someone/somebody/one
-har          | present tense of "to have"
-om           | round/about/for/in/a, about/around/down, if
-vi           | we
-min          | my
-havde        | past tense of "to have"
-ham          | him
-hun          | she
-nu           | now
-over         | over/above/across/by/beyond/past/on/about, over/past
-da           | then, when/as/since
-fra          | from/off/since, off, since
-du           | you
-ud           | out
-sin          | his/her/its/one's
-dem          | them
-os           | us/ourselves
-op           | up
-man          | you/one
-hans         | his
-hvor         | where
-eller        | or
-hvad         | what
-skal         | must/shall etc.
-selv         | myself/youself/herself/ourselves etc., even
-her          | here
-alle         | all/everyone/everybody etc.
-vil          | will (verb)
-blev         | past tense of "to stay/to remain/to get/to become"
-kunne        | could
-ind          | in
-når          | when
-være         | present tense of "to be"
-dog          | however/yet/after all
-noget        | something
-ville        | would
-jo           | you know/you see (adv), yes
-deres        | their/theirs
-efter        | after/behind/according to/for/by/from, later/afterwards
-ned          | down
-skulle       | should
-denne        | this
-end          | than
-dette        | this
-mit          | my/mine
-også         | also
-under        | under/beneath/below/during, below/underneath
-have         | have
-dig          | you
-anden        | other
-hende        | her
-mine         | my
-alt          | everything
-meget        | much/very, plenty of
-sit          | his, her, its, one's
-sine         | his, her, its, one's
-vor          | our
-mod          | against
-disse        | these
-hvis         | if
-din          | your/yours
-nogle        | some
-hos          | by/at
-blive        | be/become
-mange        | many
-ad           | by/through
-bliver       | present tense of "to be/to become"
-hendes       | her/hers
-været        | be
-thi          | for (conj)
-jer          | you
-sådan        | such, like this/like that

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_de.txt b/zookeeper/solr/collection1/conf/lang/stopwords_de.txt
deleted file mode 100644 (file)
index f770384..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_de.txt
+++ /dev/null
@@ -1,292 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/german/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A German stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
- | The number of forms in this list is reduced significantly by passing it
- | through the German stemmer.
-
-
-aber           |  but
-
-alle           |  all
-allem
-allen
-aller
-alles
-
-als            |  than, as
-also           |  so
-am             |  an + dem
-an             |  at
-
-ander          |  other
-andere
-anderem
-anderen
-anderer
-anderes
-anderm
-andern
-anderr
-anders
-
-auch           |  also
-auf            |  on
-aus            |  out of
-bei            |  by
-bin            |  am
-bis            |  until
-bist           |  art
-da             |  there
-damit          |  with it
-dann           |  then
-
-der            |  the
-den
-des
-dem
-die
-das
-
-daß            |  that
-
-derselbe       |  the same
-derselben
-denselben
-desselben
-demselben
-dieselbe
-dieselben
-dasselbe
-
-dazu           |  to that
-
-dein           |  thy
-deine
-deinem
-deinen
-deiner
-deines
-
-denn           |  because
-
-derer          |  of those
-dessen         |  of him
-
-dich           |  thee
-dir            |  to thee
-du             |  thou
-
-dies           |  this
-diese
-diesem
-diesen
-dieser
-dieses
-
-
-doch           |  (several meanings)
-dort           |  (over) there
-
-
-durch          |  through
-
-ein            |  a
-eine
-einem
-einen
-einer
-eines
-
-einig          |  some
-einige
-einigem
-einigen
-einiger
-einiges
-
-einmal         |  once
-
-er             |  he
-ihn            |  him
-ihm            |  to him
-
-es             |  it
-etwas          |  something
-
-euer           |  your
-eure
-eurem
-euren
-eurer
-eures
-
-für            |  for
-gegen          |  towards
-gewesen        |  p.p. of sein
-hab            |  have
-habe           |  have
-haben          |  have
-hat            |  has
-hatte          |  had
-hatten         |  had
-hier           |  here
-hin            |  there
-hinter         |  behind
-
-ich            |  I
-mich           |  me
-mir            |  to me
-
-
-ihr            |  you, to her
-ihre
-ihrem
-ihren
-ihrer
-ihres
-euch           |  to you
-
-im             |  in + dem
-in             |  in
-indem          |  while
-ins            |  in + das
-ist            |  is
-
-jede           |  each, every
-jedem
-jeden
-jeder
-jedes
-
-jene           |  that
-jenem
-jenen
-jener
-jenes
-
-jetzt          |  now
-kann           |  can
-
-kein           |  no
-keine
-keinem
-keinen
-keiner
-keines
-
-können         |  can
-könnte         |  could
-machen         |  do
-man            |  one
-
-manche         |  some, many a
-manchem
-manchen
-mancher
-manches
-
-mein           |  my
-meine
-meinem
-meinen
-meiner
-meines
-
-mit            |  with
-muss           |  must
-musste         |  had to
-nach           |  to(wards)
-nicht          |  not
-nichts         |  nothing
-noch           |  still, yet
-nun            |  now
-nur            |  only
-ob             |  whether
-oder           |  or
-ohne           |  without
-sehr           |  very
-
-sein           |  his
-seine
-seinem
-seinen
-seiner
-seines
-
-selbst         |  self
-sich           |  herself
-
-sie            |  they, she
-ihnen          |  to them
-
-sind           |  are
-so             |  so
-
-solche         |  such
-solchem
-solchen
-solcher
-solches
-
-soll           |  shall
-sollte         |  should
-sondern        |  but
-sonst          |  else
-über           |  over
-um             |  about, around
-und            |  and
-
-uns            |  us
-unse
-unsem
-unsen
-unser
-unses
-
-unter          |  under
-viel           |  much
-vom            |  von + dem
-von            |  from
-vor            |  before
-während        |  while
-war            |  was
-waren          |  were
-warst          |  wast
-was            |  what
-weg            |  away, off
-weil           |  because
-weiter         |  further
-
-welche         |  which
-welchem
-welchen
-welcher
-welches
-
-wenn           |  when
-werde          |  will
-werden         |  will
-wie            |  how
-wieder         |  again
-will           |  want
-wir            |  we
-wird           |  will
-wirst          |  willst
-wo             |  where
-wollen         |  want
-wollte         |  wanted
-würde          |  would
-würden         |  would
-zu             |  to
-zum            |  zu + dem
-zur            |  zu + der
-zwar           |  indeed
-zwischen       |  between
-

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_el.txt b/zookeeper/solr/collection1/conf/lang/stopwords_el.txt
deleted file mode 100644 (file)
index 232681f..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_el.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-# Lucene Greek Stopwords list
-# Note: by default this file is used after GreekLowerCaseFilter,
-# so when modifying this file use 'σ' instead of 'ς' 
-ο
-η
-το
-οι
-τα
-του
-τησ
-των
-τον
-την
-και 
-κι
-κ
-ειμαι
-εισαι
-ειναι
-ειμαστε
-ειστε
-στο
-στον
-στη
-στην
-μα
-αλλα
-απο
-για
-προσ
-με
-σε
-ωσ
-παρα
-αντι
-κατα
-μετα
-θα
-να
-δε
-δεν
-μη
-μην
-επι
-ενω
-εαν
-αν
-τοτε
-που
-πωσ
-ποιοσ
-ποια
-ποιο
-ποιοι
-ποιεσ
-ποιων
-ποιουσ
-αυτοσ
-αυτη
-αυτο
-αυτοι
-αυτων
-αυτουσ
-αυτεσ
-αυτα
-εκεινοσ
-εκεινη
-εκεινο
-εκεινοι
-εκεινεσ
-εκεινα
-εκεινων
-εκεινουσ
-οπωσ
-ομωσ
-ισωσ
-οσο
-οτι

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_en.txt b/zookeeper/solr/collection1/conf/lang/stopwords_en.txt
deleted file mode 100644 (file)
index 2c164c0..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_en.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# a couple of test stopwords to test that the words are really being
-# configured from this file:
-stopworda
-stopwordb
-
-# Standard english stop words taken from Lucene's StopAnalyzer
-a
-an
-and
-are
-as
-at
-be
-but
-by
-for
-if
-in
-into
-is
-it
-no
-not
-of
-on
-or
-such
-that
-the
-their
-then
-there
-these
-they
-this
-to
-was
-will
-with

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_es.txt b/zookeeper/solr/collection1/conf/lang/stopwords_es.txt
deleted file mode 100644 (file)
index 2db1476..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_es.txt
+++ /dev/null
@@ -1,354 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/spanish/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Spanish stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
-
- | The following is a ranked list (commonest to rarest) of stopwords
- | deriving from a large sample of text.
-
- | Extra words have been added at the end.
-
-de             |  from, of
-la             |  the, her
-que            |  who, that
-el             |  the
-en             |  in
-y              |  and
-a              |  to
-los            |  the, them
-del            |  de + el
-se             |  himself, from him etc
-las            |  the, them
-por            |  for, by, etc
-un             |  a
-para           |  for
-con            |  with
-no             |  no
-una            |  a
-su             |  his, her
-al             |  a + el
-  | es         from SER
-lo             |  him
-como           |  how
-más            |  more
-pero           |  pero
-sus            |  su plural
-le             |  to him, her
-ya             |  already
-o              |  or
-  | fue        from SER
-este           |  this
-  | ha         from HABER
-sí             |  himself etc
-porque         |  because
-esta           |  this
-  | son        from SER
-entre          |  between
-  | está     from ESTAR
-cuando         |  when
-muy            |  very
-sin            |  without
-sobre          |  on
-  | ser        from SER
-  | tiene      from TENER
-también        |  also
-me             |  me
-hasta          |  until
-hay            |  there is/are
-donde          |  where
-  | han        from HABER
-quien          |  whom, that
-  | están      from ESTAR
-  | estado     from ESTAR
-desde          |  from
-todo           |  all
-nos            |  us
-durante        |  during
-  | estados    from ESTAR
-todos          |  all
-uno            |  a
-les            |  to them
-ni             |  nor
-contra         |  against
-otros          |  other
-  | fueron     from SER
-ese            |  that
-eso            |  that
-  | había      from HABER
-ante           |  before
-ellos          |  they
-e              |  and (variant of y)
-esto           |  this
-mí             |  me
-antes          |  before
-algunos        |  some
-qué            |  what?
-unos           |  a
-yo             |  I
-otro           |  other
-otras          |  other
-otra           |  other
-él             |  he
-tanto          |  so much, many
-esa            |  that
-estos          |  these
-mucho          |  much, many
-quienes        |  who
-nada           |  nothing
-muchos         |  many
-cual           |  who
-  | sea        from SER
-poco           |  few
-ella           |  she
-estar          |  to be
-  | haber      from HABER
-estas          |  these
-  | estaba     from ESTAR
-  | estamos    from ESTAR
-algunas        |  some
-algo           |  something
-nosotros       |  we
-
-      | other forms
-
-mi             |  me
-mis            |  mi plural
-tú             |  thou
-te             |  thee
-ti             |  thee
-tu             |  thy
-tus            |  tu plural
-ellas          |  they
-nosotras       |  we
-vosotros       |  you
-vosotras       |  you
-os             |  you
-mío            |  mine
-mía            |
-míos           |
-mías           |
-tuyo           |  thine
-tuya           |
-tuyos          |
-tuyas          |
-suyo           |  his, hers, theirs
-suya           |
-suyos          |
-suyas          |
-nuestro        |  ours
-nuestra        |
-nuestros       |
-nuestras       |
-vuestro        |  yours
-vuestra        |
-vuestros       |
-vuestras       |
-esos           |  those
-esas           |  those
-
-               | forms of estar, to be (not including the infinitive):
-estoy
-estás
-está
-estamos
-estáis
-están
-esté
-estés
-estemos
-estéis
-estén
-estaré
-estarás
-estará
-estaremos
-estaréis
-estarán
-estaría
-estarías
-estaríamos
-estaríais
-estarían
-estaba
-estabas
-estábamos
-estabais
-estaban
-estuve
-estuviste
-estuvo
-estuvimos
-estuvisteis
-estuvieron
-estuviera
-estuvieras
-estuviéramos
-estuvierais
-estuvieran
-estuviese
-estuvieses
-estuviésemos
-estuvieseis
-estuviesen
-estando
-estado
-estada
-estados
-estadas
-estad
-
-               | forms of haber, to have (not including the infinitive):
-he
-has
-ha
-hemos
-habéis
-han
-haya
-hayas
-hayamos
-hayáis
-hayan
-habré
-habrás
-habrá
-habremos
-habréis
-habrán
-habría
-habrías
-habríamos
-habríais
-habrían
-había
-habías
-habíamos
-habíais
-habían
-hube
-hubiste
-hubo
-hubimos
-hubisteis
-hubieron
-hubiera
-hubieras
-hubiéramos
-hubierais
-hubieran
-hubiese
-hubieses
-hubiésemos
-hubieseis
-hubiesen
-habiendo
-habido
-habida
-habidos
-habidas
-
-               | forms of ser, to be (not including the infinitive):
-soy
-eres
-es
-somos
-sois
-son
-sea
-seas
-seamos
-seáis
-sean
-seré
-serás
-será
-seremos
-seréis
-serán
-sería
-serías
-seríamos
-seríais
-serían
-era
-eras
-éramos
-erais
-eran
-fui
-fuiste
-fue
-fuimos
-fuisteis
-fueron
-fuera
-fueras
-fuéramos
-fuerais
-fueran
-fuese
-fueses
-fuésemos
-fueseis
-fuesen
-siendo
-sido
-  |  sed also means 'thirst'
-
-               | forms of tener, to have (not including the infinitive):
-tengo
-tienes
-tiene
-tenemos
-tenéis
-tienen
-tenga
-tengas
-tengamos
-tengáis
-tengan
-tendré
-tendrás
-tendrá
-tendremos
-tendréis
-tendrán
-tendría
-tendrías
-tendríamos
-tendríais
-tendrían
-tenía
-tenías
-teníamos
-teníais
-tenían
-tuve
-tuviste
-tuvo
-tuvimos
-tuvisteis
-tuvieron
-tuviera
-tuvieras
-tuviéramos
-tuvierais
-tuvieran
-tuviese
-tuvieses
-tuviésemos
-tuvieseis
-tuviesen
-teniendo
-tenido
-tenida
-tenidos
-tenidas
-tened
-

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_eu.txt b/zookeeper/solr/collection1/conf/lang/stopwords_eu.txt
deleted file mode 100644 (file)
index 25f1db9..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_eu.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-# example set of basque stopwords
-al
-anitz
-arabera
-asko
-baina
-bat
-batean
-batek
-bati
-batzuei
-batzuek
-batzuetan
-batzuk
-bera
-beraiek
-berau
-berauek
-bere
-berori
-beroriek
-beste
-bezala
-da
-dago
-dira
-ditu
-du
-dute
-edo
-egin
-ere
-eta
-eurak
-ez
-gainera
-gu
-gutxi
-guzti
-haiei
-haiek
-haietan
-hainbeste
-hala
-han
-handik
-hango
-hara
-hari
-hark
-hartan
-hau
-hauei
-hauek
-hauetan
-hemen
-hemendik
-hemengo
-hi
-hona
-honek
-honela
-honetan
-honi
-hor
-hori
-horiei
-horiek
-horietan
-horko
-horra
-horrek
-horrela
-horretan
-horri
-hortik
-hura
-izan
-ni
-noiz
-nola
-non
-nondik
-nongo
-nor
-nora
-ze
-zein
-zen
-zenbait
-zenbat
-zer
-zergatik
-ziren
-zituen
-zu
-zuek
-zuen
-zuten

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_fa.txt b/zookeeper/solr/collection1/conf/lang/stopwords_fa.txt
deleted file mode 100644 (file)
index 723641c..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_fa.txt
+++ /dev/null
@@ -1,313 +0,0 @@
-# This file was created by Jacques Savoy and is distributed under the BSD license.
-# See http://members.unine.ch/jacques.savoy/clef/index.html.
-# Also see http://www.opensource.org/licenses/bsd-license.html
-# Note: by default this file is used after normalization, so when adding entries
-# to this file, use the arabic 'ي' instead of 'ی'
-انان
-نداشته
-سراسر
-خياه
-ايشان
-وي
-تاكنون
-بيشتري
-دوم
-پس
-ناشي
-وگو
-يا
-داشتند
-سپس
-هنگام
-هرگز
-پنج
-نشان
-امسال
-ديگر
-گروهي
-شدند
-چطور
-ده
-و
-دو
-نخستين
-ولي
-چرا
-چه
-وسط
-ه
-كدام
-قابل
-يك
-رفت
-هفت
-همچنين
-در
-هزار
-بله
-بلي
-شايد
-اما
-شناسي
-گرفته
-دهد
-داشته
-دانست
-داشتن
-خواهيم
-ميليارد
-وقتيكه
-امد
-خواهد
-جز
-اورده
-شده
-بلكه
-خدمات
-شدن
-برخي
-نبود
-بسياري
-جلوگيري
-حق
-كردند
-نوعي
-بعري
-نكرده
-نظير
-نبايد
-بوده
-بودن
-داد
-اورد
-هست
-جايي
-شود
-دنبال
-داده
-بايد
-سابق
-هيچ
-همان
-انجا
-كمتر
-كجاست
-گردد
-كسي
-تر
-مردم
-تان
-دادن
-بودند
-سري
-جدا
-ندارند
-مگر
-يكديگر
-دارد
-دهند
-بنابراين
-هنگامي
-سمت
-جا
-انچه
-خود
-دادند
-زياد
-دارند
-اثر
-بدون
-بهترين
-بيشتر
-البته
-به
-براساس
-بيرون
-كرد
-بعضي
-گرفت
-توي
-اي
-ميليون
-او
-جريان
-تول
-بر
-مانند
-برابر
-باشيم
-مدتي
-گويند
-اكنون
-تا
-تنها
-جديد
-چند
-بي
-نشده
-كردن
-كردم
-گويد
-كرده
-كنيم
-نمي
-نزد
-روي
-قصد
-فقط
-بالاي
-ديگران
-اين
-ديروز
-توسط
-سوم
-ايم
-دانند
-سوي
-استفاده
-شما
-كنار
-داريم
-ساخته
-طور
-امده
-رفته
-نخست
-بيست
-نزديك
-طي
-كنيد
-از
-انها
-تمامي
-داشت
-يكي
-طريق
-اش
-چيست
-روب
-نمايد
-گفت
-چندين
-چيزي
-تواند
-ام
-ايا
-با
-ان
-ايد
-ترين
-اينكه
-ديگري
-راه
-هايي
-بروز
-همچنان
-پاعين
-كس
-حدود
-مختلف
-مقابل
-چيز
-گيرد
-ندارد
-ضد
-همچون
-سازي
-شان
-مورد
-باره
-مرسي
-خويش
-برخوردار
-چون
-خارج
-شش
-هنوز
-تحت
-ضمن
-هستيم
-گفته
-فكر
-بسيار
-پيش
-براي
-روزهاي
-انكه
-نخواهد
-بالا
-كل
-وقتي
-كي
-چنين
-كه
-گيري
-نيست
-است
-كجا
-كند
-نيز
-يابد
-بندي
-حتي
-توانند
-عقب
-خواست
-كنند
-بين
-تمام
-همه
-ما
-باشند
-مثل
-شد
-اري
-باشد
-اره
-طبق
-بعد
-اگر
-صورت
-غير
-جاي
-بيش
-ريزي
-اند
-زيرا
-چگونه
-بار
-لطفا
-مي
-درباره
-من
-ديده
-همين
-گذاري
-برداري
-علت
-گذاشته
-هم
-فوق
-نه
-ها
-شوند
-اباد
-همواره
-هر
-اول
-خواهند
-چهار
-نام
-امروز
-مان
-هاي
-قبل
-كنم
-سعي
-تازه
-را
-هستند
-زير
-جلوي
-عنوان
-بود

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_fi.txt b/zookeeper/solr/collection1/conf/lang/stopwords_fi.txt
deleted file mode 100644 (file)
index addad79..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_fi.txt
+++ /dev/null
@@ -1,95 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/finnish/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
- 
-| forms of BE
-
-olla
-olen
-olet
-on
-olemme
-olette
-ovat
-ole        | negative form
-
-oli
-olisi
-olisit
-olisin
-olisimme
-olisitte
-olisivat
-olit
-olin
-olimme
-olitte
-olivat
-ollut
-olleet
-
-en         | negation
-et
-ei
-emme
-ette
-eivät
-
-|Nom   Gen    Acc    Part   Iness   Elat    Illat  Adess   Ablat   Allat   Ess    Trans
-minä   minun  minut  minua  minussa minusta minuun minulla minulta minulle               | I
-sinä   sinun  sinut  sinua  sinussa sinusta sinuun sinulla sinulta sinulle               | you
-hän    hänen  hänet  häntä  hänessä hänestä häneen hänellä häneltä hänelle               | he she
-me     meidän meidät meitä  meissä  meistä  meihin meillä  meiltä  meille                | we
-te     teidän teidät teitä  teissä  teistä  teihin teillä  teiltä  teille                | you
-he     heidän heidät heitä  heissä  heistä  heihin heillä  heiltä  heille                | they
-
-tämä   tämän         tätä   tässä   tästä   tähän  tallä   tältä   tälle   tänä   täksi  | this
-tuo    tuon          tuotä  tuossa  tuosta  tuohon tuolla  tuolta  tuolle  tuona  tuoksi | that
-se     sen           sitä   siinä   siitä   siihen sillä   siltä   sille   sinä   siksi  | it
-nämä   näiden        näitä  näissä  näistä  näihin näillä  näiltä  näille  näinä  näiksi | these
-nuo    noiden        noita  noissa  noista  noihin noilla  noilta  noille  noina  noiksi | those
-ne     niiden        niitä  niissä  niistä  niihin niillä  niiltä  niille  niinä  niiksi | they
-
-kuka   kenen kenet   ketä   kenessä kenestä keneen kenellä keneltä kenelle kenenä keneksi| who
-ketkä  keiden ketkä  keitä  keissä  keistä  keihin keillä  keiltä  keille  keinä  keiksi | (pl)
-mikä   minkä minkä   mitä   missä   mistä   mihin  millä   miltä   mille   minä   miksi  | which what
-mitkä                                                                                    | (pl)
-
-joka   jonka         jota   jossa   josta   johon  jolla   jolta   jolle   jona   joksi  | who which
-jotka  joiden        joita  joissa  joista  joihin joilla  joilta  joille  joina  joiksi | (pl)
-
-| conjunctions
-
-että   | that
-ja     | and
-jos    | if
-koska  | because
-kuin   | than
-mutta  | but
-niin   | so
-sekä   | and
-sillä  | for
-tai    | or
-vaan   | but
-vai    | or
-vaikka | although
-
-
-| prepositions
-
-kanssa  | with
-mukaan  | according to
-noin    | about
-poikki  | across
-yli     | over, across
-
-| other
-
-kun    | when
-niin   | so
-nyt    | now
-itse   | self
-

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_fr.txt b/zookeeper/solr/collection1/conf/lang/stopwords_fr.txt
deleted file mode 100644 (file)
index 20d12cb..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_fr.txt
+++ /dev/null
@@ -1,184 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/french/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A French stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
-au             |  a + le
-aux            |  a + les
-avec           |  with
-ce             |  this
-ces            |  these
-dans           |  with
-de             |  of
-des            |  de + les
-du             |  de + le
-elle           |  she
-en             |  `of them' etc
-et             |  and
-eux            |  them
-il             |  he
-je             |  I
-la             |  the
-le             |  the
-leur           |  their
-lui            |  him
-ma             |  my (fem)
-mais           |  but
-me             |  me
-même           |  same; as in moi-même (myself) etc
-mes            |  me (pl)
-moi            |  me
-mon            |  my (masc)
-ne             |  not
-nos            |  our (pl)
-notre          |  our
-nous           |  we
-on             |  one
-ou             |  where
-par            |  by
-pas            |  not
-pour           |  for
-qu             |  que before vowel
-que            |  that
-qui            |  who
-sa             |  his, her (fem)
-se             |  oneself
-ses            |  his (pl)
-son            |  his, her (masc)
-sur            |  on
-ta             |  thy (fem)
-te             |  thee
-tes            |  thy (pl)
-toi            |  thee
-ton            |  thy (masc)
-tu             |  thou
-un             |  a
-une            |  a
-vos            |  your (pl)
-votre          |  your
-vous           |  you
-
-               |  single letter forms
-
-c              |  c'
-d              |  d'
-j              |  j'
-l              |  l'
-à              |  to, at
-m              |  m'
-n              |  n'
-s              |  s'
-t              |  t'
-y              |  there
-
-               | forms of être (not including the infinitive):
-été
-étée
-étées
-étés
-étant
-suis
-es
-est
-sommes
-êtes
-sont
-serai
-seras
-sera
-serons
-serez
-seront
-serais
-serait
-serions
-seriez
-seraient
-étais
-était
-étions
-étiez
-étaient
-fus
-fut
-fûmes
-fûtes
-furent
-sois
-soit
-soyons
-soyez
-soient
-fusse
-fusses
-fût
-fussions
-fussiez
-fussent
-
-               | forms of avoir (not including the infinitive):
-ayant
-eu
-eue
-eues
-eus
-ai
-as
-avons
-avez
-ont
-aurai
-auras
-aura
-aurons
-aurez
-auront
-aurais
-aurait
-aurions
-auriez
-auraient
-avais
-avait
-avions
-aviez
-avaient
-eut
-eûmes
-eûtes
-eurent
-aie
-aies
-ait
-ayons
-ayez
-aient
-eusse
-eusses
-eût
-eussions
-eussiez
-eussent
-
-               | Later additions (from Jean-Christophe Deschamps)
-ceci           |  this
-cela           |  that
-celà           |  that
-cet            |  this
-cette          |  this
-ici            |  here
-ils            |  they
-les            |  the (pl)
-leurs          |  their (pl)
-quel           |  which
-quels          |  which
-quelle         |  which
-quelles        |  which
-sans           |  without
-soi            |  oneself
-

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_ga.txt b/zookeeper/solr/collection1/conf/lang/stopwords_ga.txt
deleted file mode 100644 (file)
index 9ff88d7..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_ga.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-
-a
-ach
-ag
-agus
-an
-aon
-ar
-arna
-as
-b'
-ba
-beirt
-bhúr
-caoga
-ceathair
-ceathrar
-chomh
-chtó
-chuig
-chun
-cois
-céad
-cúig
-cúigear
-d'
-daichead
-dar
-de
-deich
-deichniúr
-den
-dhá
-do
-don
-dtí
-dá
-dár
-dó
-faoi
-faoin
-faoina
-faoinár
-fara
-fiche
-gach
-gan
-go
-gur
-haon
-hocht
-i
-iad
-idir
-in
-ina
-ins
-inár
-is
-le
-leis
-lena
-lenár
-m'
-mar
-mo
-mé
-na
-nach
-naoi
-naonúr
-ná
-ní
-níor
-nó
-nócha
-ocht
-ochtar
-os
-roimh
-sa
-seacht
-seachtar
-seachtó
-seasca
-seisear
-siad
-sibh
-sinn
-sna
-sé
-sí
-tar
-thar
-thú
-triúr
-trí
-trína
-trínár
-tríocha
-tú
-um
-ár
-é
-éis
-í
-ó
-ón
-óna
-ónár

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_gl.txt b/zookeeper/solr/collection1/conf/lang/stopwords_gl.txt
deleted file mode 100644 (file)
index d8760b1..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_gl.txt
+++ /dev/null
@@ -1,161 +0,0 @@
-# galican stopwords
-a
-aínda
-alí
-aquel
-aquela
-aquelas
-aqueles
-aquilo
-aquí
-ao
-aos
-as
-así
-á
-ben
-cando
-che
-co
-coa
-comigo
-con
-connosco
-contigo
-convosco
-coas
-cos
-cun
-cuns
-cunha
-cunhas
-da
-dalgunha
-dalgunhas
-dalgún
-dalgúns
-das
-de
-del
-dela
-delas
-deles
-desde
-deste
-do
-dos
-dun
-duns
-dunha
-dunhas
-e
-el
-ela
-elas
-eles
-en
-era
-eran
-esa
-esas
-ese
-eses
-esta
-estar
-estaba
-está
-están
-este
-estes
-estiven
-estou
-eu
-é
-facer
-foi
-foron
-fun
-había
-hai
-iso
-isto
-la
-las
-lle
-lles
-lo
-los
-mais
-me
-meu
-meus
-min
-miña
-miñas
-moi
-na
-nas
-neste
-nin
-no
-non
-nos
-nosa
-nosas
-noso
-nosos
-nós
-nun
-nunha
-nuns
-nunhas
-o
-os
-ou
-ó
-ós
-para
-pero
-pode
-pois
-pola
-polas
-polo
-polos
-por
-que
-se
-senón
-ser
-seu
-seus
-sexa
-sido
-sobre
-súa
-súas
-tamén
-tan
-te
-ten
-teñen
-teño
-ter
-teu
-teus
-ti
-tido
-tiña
-tiven
-túa
-túas
-un
-unha
-unhas
-uns
-vos
-vosa
-vosas
-voso
-vosos
-vós

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_hi.txt b/zookeeper/solr/collection1/conf/lang/stopwords_hi.txt
deleted file mode 100644 (file)
index 86286bb..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_hi.txt
+++ /dev/null
@@ -1,235 +0,0 @@
-# Also see http://www.opensource.org/licenses/bsd-license.html
-# See http://members.unine.ch/jacques.savoy/clef/index.html.
-# This file was created by Jacques Savoy and is distributed under the BSD license.
-# Note: by default this file also contains forms normalized by HindiNormalizer 
-# for spelling variation (see section below), such that it can be used whether or 
-# not you enable that feature. When adding additional entries to this list,
-# please add the normalized form as well. 
-अंदर
-अत
-अपना
-अपनी
-अपने
-अभी
-आदि
-आप
-इत्यादि
-इन 
-इनका
-इन्हीं
-इन्हें
-इन्हों
-इस
-इसका
-इसकी
-इसके
-इसमें
-इसी
-इसे
-उन
-उनका
-उनकी
-उनके
-उनको
-उन्हीं
-उन्हें
-उन्हों
-उस
-उसके
-उसी
-उसे
-एक
-एवं
-एस
-ऐसे
-और
-कई
-कर
-करता
-करते
-करना
-करने
-करें
-कहते
-कहा
-का
-काफ़ी
-कि
-कितना
-किन्हें
-किन्हों
-किया
-किर
-किस
-किसी
-किसे
-की
-कुछ
-कुल
-के
-को
-कोई
-कौन
-कौनसा
-गया
-घर
-जब
-जहाँ
-जा
-जितना
-जिन
-जिन्हें
-जिन्हों
-जिस
-जिसे
-जीधर
-जैसा
-जैसे
-जो
-तक
-तब
-तरह
-तिन
-तिन्हें
-तिन्हों
-तिस
-तिसे
-तो
-था
-थी
-थे
-दबारा
-दिया
-दुसरा
-दूसरे
-दो
-द्वारा
-न
-नहीं
-ना
-निहायत
-नीचे
-ने
-पर
-पर  
-पहले
-पूरा
-पे
-फिर
-बनी
-बही
-बहुत
-बाद
-बाला
-बिलकुल
-भी
-भीतर
-मगर
-मानो
-मे
-में
-यदि
-यह
-यहाँ
-यही
-या
-यिह 
-ये
-रखें
-रहा
-रहे
-ऱ्वासा
-लिए
-लिये
-लेकिन
-व
-वर्ग
-वह
-वह 
-वहाँ
-वहीं
-वाले
-वुह 
-वे
-वग़ैरह
-संग
-सकता
-सकते
-सबसे
-सभी
-साथ
-साबुत
-साभ
-सारा
-से
-सो
-ही
-हुआ
-हुई
-हुए
-है
-हैं
-हो
-होता
-होती
-होते
-होना
-होने
-# additional normalized forms of the above
-अपनि
-जेसे
-होति
-सभि
-तिंहों
-इंहों
-दवारा
-इसि
-किंहें
-थि
-उंहों
-ओर
-जिंहें
-वहिं
-अभि
-बनि
-हि
-उंहिं
-उंहें
-हें
-वगेरह
-एसे
-रवासा
-कोन
-निचे
-काफि
-उसि
-पुरा
-भितर
-हे
-बहि
-वहां
-कोइ
-यहां
-जिंहों
-तिंहें
-किसि
-कइ
-यहि
-इंहिं
-जिधर
-इंहें
-अदि
-इतयादि
-हुइ
-कोनसा
-इसकि
-दुसरे
-जहां
-अप
-किंहों
-उनकि
-भि
-वरग
-हुअ
-जेसा
-नहिं

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_hu.txt b/zookeeper/solr/collection1/conf/lang/stopwords_hu.txt
deleted file mode 100644 (file)
index 1a96f1d..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_hu.txt
+++ /dev/null
@@ -1,209 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/hungarian/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
- 
-| Hungarian stop word list
-| prepared by Anna Tordai
-
-a
-ahogy
-ahol
-aki
-akik
-akkor
-alatt
-által
-általában
-amely
-amelyek
-amelyekben
-amelyeket
-amelyet
-amelynek
-ami
-amit
-amolyan
-amíg
-amikor
-át
-abban
-ahhoz
-annak
-arra
-arról
-az
-azok
-azon
-azt
-azzal
-azért
-aztán
-azután
-azonban
-bár
-be
-belül
-benne
-cikk
-cikkek
-cikkeket
-csak
-de
-e
-eddig
-egész
-egy
-egyes
-egyetlen
-egyéb
-egyik
-egyre
-ekkor
-el
-elég
-ellen
-elő
-először
-előtt
-első
-én
-éppen
-ebben
-ehhez
-emilyen
-ennek
-erre
-ez
-ezt
-ezek
-ezen
-ezzel
-ezért
-és
-fel
-felé
-hanem
-hiszen
-hogy
-hogyan
-igen
-így
-illetve
-ill.
-ill
-ilyen
-ilyenkor
-ison
-ismét
-itt
-jó
-jól
-jobban
-kell
-kellett
-keresztül
-keressünk
-ki
-kívül
-között
-közül
-legalább
-lehet
-lehetett
-legyen
-lenne
-lenni
-lesz
-lett
-maga
-magát
-majd
-majd
-már
-más
-másik
-meg
-még
-mellett
-mert
-mely
-melyek
-mi
-mit
-míg
-miért
-milyen
-mikor
-minden
-mindent
-mindenki
-mindig
-mint
-mintha
-mivel
-most
-nagy
-nagyobb
-nagyon
-ne
-néha
-nekem
-neki
-nem
-néhány
-nélkül
-nincs
-olyan
-ott
-össze
-ő
-ők
-őket
-pedig
-persze
-rá
-s
-saját
-sem
-semmi
-sok
-sokat
-sokkal
-számára
-szemben
-szerint
-szinte
-talán
-tehát
-teljes
-tovább
-továbbá
-több
-úgy
-ugyanis
-új
-újabb
-újra
-után
-utána
-utolsó
-vagy
-vagyis
-valaki
-valami
-valamint
-való
-vagyok
-van
-vannak
-volt
-voltam
-voltak
-voltunk
-vissza
-vele
-viszont
-volna

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_hy.txt b/zookeeper/solr/collection1/conf/lang/stopwords_hy.txt
deleted file mode 100644 (file)
index 60c1c50..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_hy.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-# example set of Armenian stopwords.
-այդ
-այլ
-այն
-այս
-դու
-դուք
-եմ
-են
-ենք
-ես
-եք
-է
-էի
-էին
-էինք
-էիր
-էիք
-էր
-ըստ
-թ
-ի
-ին
-իսկ
-իր
-կամ
-համար
-հետ
-հետո
-մենք
-մեջ
-մի
-ն
-նա
-նաև
-նրա
-նրանք
-որ
-որը
-որոնք
-որպես
-ու
-ում
-պիտի
-վրա
-և

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_id.txt b/zookeeper/solr/collection1/conf/lang/stopwords_id.txt
deleted file mode 100644 (file)
index 4617f83..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_id.txt
+++ /dev/null
@@ -1,359 +0,0 @@
-# from appendix D of: A Study of Stemming Effects on Information
-# Retrieval in Bahasa Indonesia
-ada
-adanya
-adalah
-adapun
-agak
-agaknya
-agar
-akan
-akankah
-akhirnya
-aku
-akulah
-amat
-amatlah
-anda
-andalah
-antar
-diantaranya
-antara
-antaranya
-diantara
-apa
-apaan
-mengapa
-apabila
-apakah
-apalagi
-apatah
-atau
-ataukah
-ataupun
-bagai
-bagaikan
-sebagai
-sebagainya
-bagaimana
-bagaimanapun
-sebagaimana
-bagaimanakah
-bagi
-bahkan
-bahwa
-bahwasanya
-sebaliknya
-banyak
-sebanyak
-beberapa
-seberapa
-begini
-beginian
-beginikah
-beginilah
-sebegini
-begitu
-begitukah
-begitulah
-begitupun
-sebegitu
-belum
-belumlah
-sebelum
-sebelumnya
-sebenarnya
-berapa
-berapakah
-berapalah
-berapapun
-betulkah
-sebetulnya
-biasa
-biasanya
-bila
-bilakah
-bisa
-bisakah
-sebisanya
-boleh
-bolehkah
-bolehlah
-buat
-bukan
-bukankah
-bukanlah
-bukannya
-cuma
-percuma
-dahulu
-dalam
-dan
-dapat
-dari
-daripada
-dekat
-demi
-demikian
-demikianlah
-sedemikian
-dengan
-depan
-di
-dia
-dialah
-dini
-diri
-dirinya
-terdiri
-dong
-dulu
-enggak
-enggaknya
-entah
-entahlah
-terhadap
-terhadapnya
-hal
-hampir
-hanya
-hanyalah
-harus
-haruslah
-harusnya
-seharusnya
-hendak
-hendaklah
-hendaknya
-hingga
-sehingga
-ia
-ialah
-ibarat
-ingin
-inginkah
-inginkan
-ini
-inikah
-inilah
-itu
-itukah
-itulah
-jangan
-jangankan
-janganlah
-jika
-jikalau
-juga
-justru
-kala
-kalau
-kalaulah
-kalaupun
-kalian
-kami
-kamilah
-kamu
-kamulah
-kan
-kapan
-kapankah
-kapanpun
-dikarenakan
-karena
-karenanya
-ke
-kecil
-kemudian
-kenapa
-kepada
-kepadanya
-ketika
-seketika
-khususnya
-kini
-kinilah
-kiranya
-sekiranya
-kita
-kitalah
-kok
-lagi
-lagian
-selagi
-lah
-lain
-lainnya
-melainkan
-selaku
-lalu
-melalui
-terlalu
-lama
-lamanya
-selama
-selama
-selamanya
-lebih
-terlebih
-bermacam
-macam
-semacam
-maka
-makanya
-makin
-malah
-malahan
-mampu
-mampukah
-mana
-manakala
-manalagi
-masih
-masihkah
-semasih
-masing
-mau
-maupun
-semaunya
-memang
-mereka
-merekalah
-meski
-meskipun
-semula
-mungkin
-mungkinkah
-nah
-namun
-nanti
-nantinya
-nyaris
-oleh
-olehnya
-seorang
-seseorang
-pada
-padanya
-padahal
-paling
-sepanjang
-pantas
-sepantasnya
-sepantasnyalah
-para
-pasti
-pastilah
-per
-pernah
-pula
-pun
-merupakan
-rupanya
-serupa
-saat
-saatnya
-sesaat
-saja
-sajalah
-saling
-bersama
-sama
-sesama
-sambil
-sampai
-sana
-sangat
-sangatlah
-saya
-sayalah
-se
-sebab
-sebabnya
-sebuah
-tersebut
-tersebutlah
-sedang
-sedangkan
-sedikit
-sedikitnya
-segala
-segalanya
-segera
-sesegera
-sejak
-sejenak
-sekali
-sekalian
-sekalipun
-sesekali
-sekaligus
-sekarang
-sekarang
-sekitar
-sekitarnya
-sela
-selain
-selalu
-seluruh
-seluruhnya
-semakin
-sementara
-sempat
-semua
-semuanya
-sendiri
-sendirinya
-seolah
-seperti
-sepertinya
-sering
-seringnya
-serta
-siapa
-siapakah
-siapapun
-disini
-disinilah
-sini
-sinilah
-sesuatu
-sesuatunya
-suatu
-sesudah
-sesudahnya
-sudah
-sudahkah
-sudahlah
-supaya
-tadi
-tadinya
-tak
-tanpa
-setelah
-telah
-tentang
-tentu
-tentulah
-tentunya
-tertentu
-seterusnya
-tapi
-tetapi
-setiap
-tiap
-setidaknya
-tidak
-tidakkah
-tidaklah
-toh
-waduh
-wah
-wahai
-sewaktu
-walau
-walaupun
-wong
-yaitu
-yakni
-yang

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_it.txt b/zookeeper/solr/collection1/conf/lang/stopwords_it.txt
deleted file mode 100644 (file)
index 4cb5b08..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_it.txt
+++ /dev/null
@@ -1,301 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/italian/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | An Italian stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
-ad             |  a (to) before vowel
-al             |  a + il
-allo           |  a + lo
-ai             |  a + i
-agli           |  a + gli
-all            |  a + l'
-agl            |  a + gl'
-alla           |  a + la
-alle           |  a + le
-con            |  with
-col            |  con + il
-coi            |  con + i (forms collo, cogli etc are now very rare)
-da             |  from
-dal            |  da + il
-dallo          |  da + lo
-dai            |  da + i
-dagli          |  da + gli
-dall           |  da + l'
-dagl           |  da + gll'
-dalla          |  da + la
-dalle          |  da + le
-di             |  of
-del            |  di + il
-dello          |  di + lo
-dei            |  di + i
-degli          |  di + gli
-dell           |  di + l'
-degl           |  di + gl'
-della          |  di + la
-delle          |  di + le
-in             |  in
-nel            |  in + el
-nello          |  in + lo
-nei            |  in + i
-negli          |  in + gli
-nell           |  in + l'
-negl           |  in + gl'
-nella          |  in + la
-nelle          |  in + le
-su             |  on
-sul            |  su + il
-sullo          |  su + lo
-sui            |  su + i
-sugli          |  su + gli
-sull           |  su + l'
-sugl           |  su + gl'
-sulla          |  su + la
-sulle          |  su + le
-per            |  through, by
-tra            |  among
-contro         |  against
-io             |  I
-tu             |  thou
-lui            |  he
-lei            |  she
-noi            |  we
-voi            |  you
-loro           |  they
-mio            |  my
-mia            |
-miei           |
-mie            |
-tuo            |
-tua            |
-tuoi           |  thy
-tue            |
-suo            |
-sua            |
-suoi           |  his, her
-sue            |
-nostro         |  our
-nostra         |
-nostri         |
-nostre         |
-vostro         |  your
-vostra         |
-vostri         |
-vostre         |
-mi             |  me
-ti             |  thee
-ci             |  us, there
-vi             |  you, there
-lo             |  him, the
-la             |  her, the
-li             |  them
-le             |  them, the
-gli            |  to him, the
-ne             |  from there etc
-il             |  the
-un             |  a
-uno            |  a
-una            |  a
-ma             |  but
-ed             |  and
-se             |  if
-perché         |  why, because
-anche          |  also
-come           |  how
-dov            |  where (as dov')
-dove           |  where
-che            |  who, that
-chi            |  who
-cui            |  whom
-non            |  not
-più            |  more
-quale          |  who, that
-quanto         |  how much
-quanti         |
-quanta         |
-quante         |
-quello         |  that
-quelli         |
-quella         |
-quelle         |
-questo         |  this
-questi         |
-questa         |
-queste         |
-si             |  yes
-tutto          |  all
-tutti          |  all
-
-               |  single letter forms:
-
-a              |  at
-c              |  as c' for ce or ci
-e              |  and
-i              |  the
-l              |  as l'
-o              |  or
-
-               | forms of avere, to have (not including the infinitive):
-
-ho
-hai
-ha
-abbiamo
-avete
-hanno
-abbia
-abbiate
-abbiano
-avrò
-avrai
-avrà
-avremo
-avrete
-avranno
-avrei
-avresti
-avrebbe
-avremmo
-avreste
-avrebbero
-avevo
-avevi
-aveva
-avevamo
-avevate
-avevano
-ebbi
-avesti
-ebbe
-avemmo
-aveste
-ebbero
-avessi
-avesse
-avessimo
-avessero
-avendo
-avuto
-avuta
-avuti
-avute
-
-               | forms of essere, to be (not including the infinitive):
-sono
-sei
-è
-siamo
-siete
-sia
-siate
-siano
-sarò
-sarai
-sarà
-saremo
-sarete
-saranno
-sarei
-saresti
-sarebbe
-saremmo
-sareste
-sarebbero
-ero
-eri
-era
-eravamo
-eravate
-erano
-fui
-fosti
-fu
-fummo
-foste
-furono
-fossi
-fosse
-fossimo
-fossero
-essendo
-
-               | forms of fare, to do (not including the infinitive, fa, fat-):
-faccio
-fai
-facciamo
-fanno
-faccia
-facciate
-facciano
-farò
-farai
-farà
-faremo
-farete
-faranno
-farei
-faresti
-farebbe
-faremmo
-fareste
-farebbero
-facevo
-facevi
-faceva
-facevamo
-facevate
-facevano
-feci
-facesti
-fece
-facemmo
-faceste
-fecero
-facessi
-facesse
-facessimo
-facessero
-facendo
-
-               | forms of stare, to be (not including the infinitive):
-sto
-stai
-sta
-stiamo
-stanno
-stia
-stiate
-stiano
-starò
-starai
-starà
-staremo
-starete
-staranno
-starei
-staresti
-starebbe
-staremmo
-stareste
-starebbero
-stavo
-stavi
-stava
-stavamo
-stavate
-stavano
-stetti
-stesti
-stette
-stemmo
-steste
-stettero
-stessi
-stesse
-stessimo
-stessero
-stando

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_ja.txt b/zookeeper/solr/collection1/conf/lang/stopwords_ja.txt
deleted file mode 100644 (file)
index d4321be..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_ja.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-#
-# This file defines a stopword set for Japanese.
-#
-# This set is made up of hand-picked frequent terms from segmented Japanese Wikipedia.
-# Punctuation characters and frequent kanji have mostly been left out.  See LUCENE-3745
-# for frequency lists, etc. that can be useful for making your own set (if desired)
-#
-# Note that there is an overlap between these stopwords and the terms stopped when used
-# in combination with the JapanesePartOfSpeechStopFilter.  When editing this file, note
-# that comments are not allowed on the same line as stopwords.
-#
-# Also note that stopping is done in a case-insensitive manner.  Change your StopFilter
-# configuration if you need case-sensitive stopping.  Lastly, note that stopping is done
-# using the same character width as the entries in this file.  Since this StopFilter is
-# normally done after a CJKWidthFilter in your chain, you would usually want your romaji
-# entries to be in half-width and your kana entries to be in full-width.
-#
-の
-に
-は
-を
-た
-が
-で
-て
-と
-し
-れ
-さ
-ある
-いる
-も
-する
-から
-な
-こと
-として
-い
-や
-れる
-など
-なっ
-ない
-この
-ため
-その
-あっ
-よう
-また
-もの
-という
-あり
-まで
-られ
-なる
-へ
-か
-だ
-これ
-によって
-により
-おり
-より
-による
-ず
-なり
-られる
-において
-ば
-なかっ
-なく
-しかし
-について
-せ
-だっ
-その後
-できる
-それ
-う
-ので
-なお
-のみ
-でき
-き
-つ
-における
-および
-いう
-さらに
-でも
-ら
-たり
-その他
-に関する
-たち
-ます
-ん
-なら
-に対して
-特に
-せる
-及び
-これら
-とき
-では
-にて
-ほか
-ながら
-うち
-そして
-とともに
-ただし
-かつて
-それぞれ
-または
-お
-ほど
-ものの
-に対する
-ほとんど
-と共に
-といった
-です
-とも
-ところ
-ここ
-##### End of file

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_lv.txt b/zookeeper/solr/collection1/conf/lang/stopwords_lv.txt
deleted file mode 100644 (file)
index e21a23c..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_lv.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-# Set of Latvian stopwords from A Stemming Algorithm for Latvian, Karlis Kreslins
-# the original list of over 800 forms was refined: 
-#   pronouns, adverbs, interjections were removed
-# 
-# prepositions
-aiz
-ap
-ar
-apakš
-ārpus
-augšpus
-bez
-caur
-dēļ
-gar
-iekš
-iz
-kopš
-labad
-lejpus
-līdz
-no
-otrpus
-pa
-par
-pār
-pēc
-pie
-pirms
-pret
-priekš
-starp
-šaipus
-uz
-viņpus
-virs
-virspus
-zem
-apakšpus
-# Conjunctions
-un
-bet
-jo
-ja
-ka
-lai
-tomēr
-tikko
-turpretī
-arī
-kaut
-gan
-tādēļ
-tā
-ne
-tikvien
-vien
-kā
-ir
-te
-vai
-kamēr
-# Particles
-ar
-diezin
-droši
-diemžēl
-nebūt
-ik
-it
-taču
-nu
-pat
-tiklab
-iekšpus
-nedz
-tik
-nevis
-turpretim
-jeb
-iekam
-iekām
-iekāms
-kolīdz
-līdzko
-tiklīdz
-jebšu
-tālab
-tāpēc
-nekā
-itin
-jā
-jau
-jel
-nē
-nezin
-tad
-tikai
-vis
-tak
-iekams
-vien
-# modal verbs
-būt  
-biju 
-biji
-bija
-bijām
-bijāt
-esmu
-esi
-esam
-esat 
-būšu     
-būsi
-būs
-būsim
-būsiet
-tikt
-tiku
-tiki
-tika
-tikām
-tikāt
-tieku
-tiec
-tiek
-tiekam
-tiekat
-tikšu
-tiks
-tiksim
-tiksiet
-tapt
-tapi
-tapāt
-topat
-tapšu
-tapsi
-taps
-tapsim
-tapsiet
-kļūt
-kļuvu
-kļuvi
-kļuva
-kļuvām
-kļuvāt
-kļūstu
-kļūsti
-kļūst
-kļūstam
-kļūstat
-kļūšu
-kļūsi
-kļūs
-kļūsim
-kļūsiet
-# verbs
-varēt
-varēju
-varējām
-varēšu
-varēsim
-var
-varēji
-varējāt
-varēsi
-varēsiet
-varat
-varēja
-varēs

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_nl.txt b/zookeeper/solr/collection1/conf/lang/stopwords_nl.txt
deleted file mode 100644 (file)
index f4d61f5..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_nl.txt
+++ /dev/null
@@ -1,117 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/dutch/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Dutch stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
- | This is a ranked list (commonest to rarest) of stopwords derived from
- | a large sample of Dutch text.
-
- | Dutch stop words frequently exhibit homonym clashes. These are indicated
- | clearly below.
-
-de             |  the
-en             |  and
-van            |  of, from
-ik             |  I, the ego
-te             |  (1) chez, at etc, (2) to, (3) too
-dat            |  that, which
-die            |  that, those, who, which
-in             |  in, inside
-een            |  a, an, one
-hij            |  he
-het            |  the, it
-niet           |  not, nothing, naught
-zijn           |  (1) to be, being, (2) his, one's, its
-is             |  is
-was            |  (1) was, past tense of all persons sing. of 'zijn' (to be) (2) wax, (3) the washing, (4) rise of river
-op             |  on, upon, at, in, up, used up
-aan            |  on, upon, to (as dative)
-met            |  with, by
-als            |  like, such as, when
-voor           |  (1) before, in front of, (2) furrow
-had            |  had, past tense all persons sing. of 'hebben' (have)
-er             |  there
-maar           |  but, only
-om             |  round, about, for etc
-hem            |  him
-dan            |  then
-zou            |  should/would, past tense all persons sing. of 'zullen'
-of             |  or, whether, if
-wat            |  what, something, anything
-mijn           |  possessive and noun 'mine'
-men            |  people, 'one'
-dit            |  this
-zo             |  so, thus, in this way
-door           |  through by
-over           |  over, across
-ze             |  she, her, they, them
-zich           |  oneself
-bij            |  (1) a bee, (2) by, near, at
-ook            |  also, too
-tot            |  till, until
-je             |  you
-mij            |  me
-uit            |  out of, from
-der            |  Old Dutch form of 'van der' still found in surnames
-daar           |  (1) there, (2) because
-haar           |  (1) her, their, them, (2) hair
-naar           |  (1) unpleasant, unwell etc, (2) towards, (3) as
-heb            |  present first person sing. of 'to have'
-hoe            |  how, why
-heeft          |  present third person sing. of 'to have'
-hebben         |  'to have' and various parts thereof
-deze           |  this
-u              |  you
-want           |  (1) for, (2) mitten, (3) rigging
-nog            |  yet, still
-zal            |  'shall', first and third person sing. of verb 'zullen' (will)
-me             |  me
-zij            |  she, they
-nu             |  now
-ge             |  'thou', still used in Belgium and south Netherlands
-geen           |  none
-omdat          |  because
-iets           |  something, somewhat
-worden         |  to become, grow, get
-toch           |  yet, still
-al             |  all, every, each
-waren          |  (1) 'were' (2) to wander, (3) wares, (3)
-veel           |  much, many
-meer           |  (1) more, (2) lake
-doen           |  to do, to make
-toen           |  then, when
-moet           |  noun 'spot/mote' and present form of 'to must'
-ben            |  (1) am, (2) 'are' in interrogative second person singular of 'to be'
-zonder         |  without
-kan            |  noun 'can' and present form of 'to be able'
-hun            |  their, them
-dus            |  so, consequently
-alles          |  all, everything, anything
-onder          |  under, beneath
-ja             |  yes, of course
-eens           |  once, one day
-hier           |  here
-wie            |  who
-werd           |  imperfect third person sing. of 'become'
-altijd         |  always
-doch           |  yet, but etc
-wordt          |  present third person sing. of 'become'
-wezen          |  (1) to be, (2) 'been' as in 'been fishing', (3) orphans
-kunnen         |  to be able
-ons            |  us/our
-zelf           |  self
-tegen          |  against, towards, at
-na             |  after, near
-reeds          |  already
-wil            |  (1) present tense of 'want', (2) 'will', noun, (3) fender
-kon            |  could; past tense of 'to be able'
-niets          |  nothing
-uw             |  your
-iemand         |  somebody
-geweest        |  been; past participle of 'be'
-andere         |  other

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_no.txt b/zookeeper/solr/collection1/conf/lang/stopwords_no.txt
deleted file mode 100644 (file)
index e76f36e..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_no.txt
+++ /dev/null
@@ -1,192 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/norwegian/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Norwegian stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
- | This stop word list is for the dominant bokmål dialect. Words unique
- | to nynorsk are marked *.
-
- | Revised by Jan Bruusgaard <Jan.Bruusgaard@ssb.no>, Jan 2005
-
-og             | and
-i              | in
-jeg            | I
-det            | it/this/that
-at             | to (w. inf.)
-en             | a/an
-et             | a/an
-den            | it/this/that
-til            | to
-er             | is/am/are
-som            | who/that
-på             | on
-de             | they / you(formal)
-med            | with
-han            | he
-av             | of
-ikke           | not
-ikkje          | not *
-der            | there
-så             | so
-var            | was/were
-meg            | me
-seg            | you
-men            | but
-ett            | one
-har            | have
-om             | about
-vi             | we
-min            | my
-mitt           | my
-ha             | have
-hadde          | had
-hun            | she
-nå             | now
-over           | over
-da             | when/as
-ved            | by/know
-fra            | from
-du             | you
-ut             | out
-sin            | your
-dem            | them
-oss            | us
-opp            | up
-man            | you/one
-kan            | can
-hans           | his
-hvor           | where
-eller          | or
-hva            | what
-skal           | shall/must
-selv           | self (reflective)
-sjøl           | self (reflective)
-her            | here
-alle           | all
-vil            | will
-bli            | become
-ble            | became
-blei           | became *
-blitt          | have become
-kunne          | could
-inn            | in
-når            | when
-være           | be
-kom            | come
-noen           | some
-noe            | some
-ville          | would
-dere           | you
-som            | who/which/that
-deres          | their/theirs
-kun            | only/just
-ja             | yes
-etter          | after
-ned            | down
-skulle         | should
-denne          | this
-for            | for/because
-deg            | you
-si             | hers/his
-sine           | hers/his
-sitt           | hers/his
-mot            | against
-å              | to
-meget          | much
-hvorfor        | why
-dette          | this
-disse          | these/those
-uten           | without
-hvordan        | how
-ingen          | none
-din            | your
-ditt           | your
-blir           | become
-samme          | same
-hvilken        | which
-hvilke         | which (plural)
-sånn           | such a
-inni           | inside/within
-mellom         | between
-vår            | our
-hver           | each
-hvem           | who
-vors           | us/ours
-hvis           | whose
-både           | both
-bare           | only/just
-enn            | than
-fordi          | as/because
-før            | before
-mange          | many
-også           | also
-slik           | just
-vært           | been
-være           | to be
-båe            | both *
-begge          | both
-siden          | since
-dykk           | your *
-dykkar         | yours *
-dei            | they *
-deira          | them *
-deires         | theirs *
-deim           | them *
-di             | your (fem.) *
-då             | as/when *
-eg             | I *
-ein            | a/an *
-eit            | a/an *
-eitt           | a/an *
-elles          | or *
-honom          | he *
-hjå            | at *
-ho             | she *
-hoe            | she *
-henne          | her
-hennar         | her/hers
-hennes         | hers
-hoss           | how *
-hossen         | how *
-ikkje          | not *
-ingi           | noone *
-inkje          | noone *
-korleis        | how *
-korso          | how *
-kva            | what/which *
-kvar           | where *
-kvarhelst      | where *
-kven           | who/whom *
-kvi            | why *
-kvifor         | why *
-me             | we *
-medan          | while *
-mi             | my *
-mine           | my *
-mykje          | much *
-no             | now *
-nokon          | some (masc./neut.) *
-noka           | some (fem.) *
-nokor          | some *
-noko           | some *
-nokre          | some *
-si             | his/hers *
-sia            | since *
-sidan          | since *
-so             | so *
-somt           | some *
-somme          | some *
-um             | about*
-upp            | up *
-vere           | be *
-vore           | was *
-verte          | become *
-vort           | become *
-varte          | became *
-vart           | became *
-

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_pt.txt b/zookeeper/solr/collection1/conf/lang/stopwords_pt.txt
deleted file mode 100644 (file)
index 276c1b4..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_pt.txt
+++ /dev/null
@@ -1,251 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/portuguese/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Portuguese stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
-
- | The following is a ranked list (commonest to rarest) of stopwords
- | deriving from a large sample of text.
-
- | Extra words have been added at the end.
-
-de             |  of, from
-a              |  the; to, at; her
-o              |  the; him
-que            |  who, that
-e              |  and
-do             |  de + o
-da             |  de + a
-em             |  in
-um             |  a
-para           |  for
-  | é          from SER
-com            |  with
-não            |  not, no
-uma            |  a
-os             |  the; them
-no             |  em + o
-se             |  himself etc
-na             |  em + a
-por            |  for
-mais           |  more
-as             |  the; them
-dos            |  de + os
-como           |  as, like
-mas            |  but
-  | foi        from SER
-ao             |  a + o
-ele            |  he
-das            |  de + as
-  | tem        from TER
-à              |  a + a
-seu            |  his
-sua            |  her
-ou             |  or
-  | ser        from SER
-quando         |  when
-muito          |  much
-  | há         from HAV
-nos            |  em + os; us
-já             |  already, now
-  | está       from EST
-eu             |  I
-também         |  also
-só             |  only, just
-pelo           |  per + o
-pela           |  per + a
-até            |  up to
-isso           |  that
-ela            |  he
-entre          |  between
-  | era        from SER
-depois         |  after
-sem            |  without
-mesmo          |  same
-aos            |  a + os
-  | ter        from TER
-seus           |  his
-quem           |  whom
-nas            |  em + as
-me             |  me
-esse           |  that
-eles           |  they
-  | estão      from EST
-você           |  you
-  | tinha      from TER
-  | foram      from SER
-essa           |  that
-num            |  em + um
-nem            |  nor
-suas           |  her
-meu            |  my
-às             |  a + as
-minha          |  my
-  | têm        from TER
-numa           |  em + uma
-pelos          |  per + os
-elas           |  they
-  | havia      from HAV
-  | seja       from SER
-qual           |  which
-  | será       from SER
-nós            |  we
-  | tenho      from TER
-lhe            |  to him, her
-deles          |  of them
-essas          |  those
-esses          |  those
-pelas          |  per + as
-este           |  this
-  | fosse      from SER
-dele           |  of him
-
- | other words. There are many contractions such as naquele = em+aquele,
- | mo = me+o, but they are rare.
- | Indefinite article plural forms are also rare.
-
-tu             |  thou
-te             |  thee
-vocês          |  you (plural)
-vos            |  you
-lhes           |  to them
-meus           |  my
-minhas
-teu            |  thy
-tua
-teus
-tuas
-nosso          | our
-nossa
-nossos
-nossas
-
-dela           |  of her
-delas          |  of them
-
-esta           |  this
-estes          |  these
-estas          |  these
-aquele         |  that
-aquela         |  that
-aqueles        |  those
-aquelas        |  those
-isto           |  this
-aquilo         |  that
-
-               | forms of estar, to be (not including the infinitive):
-estou
-está
-estamos
-estão
-estive
-esteve
-estivemos
-estiveram
-estava
-estávamos
-estavam
-estivera
-estivéramos
-esteja
-estejamos
-estejam
-estivesse
-estivéssemos
-estivessem
-estiver
-estivermos
-estiverem
-
-               | forms of haver, to have (not including the infinitive):
-hei
-há
-havemos
-hão
-houve
-houvemos
-houveram
-houvera
-houvéramos
-haja
-hajamos
-hajam
-houvesse
-houvéssemos
-houvessem
-houver
-houvermos
-houverem
-houverei
-houverá
-houveremos
-houverão
-houveria
-houveríamos
-houveriam
-
-               | forms of ser, to be (not including the infinitive):
-sou
-somos
-são
-era
-éramos
-eram
-fui
-foi
-fomos
-foram
-fora
-fôramos
-seja
-sejamos
-sejam
-fosse
-fôssemos
-fossem
-for
-formos
-forem
-serei
-será
-seremos
-serão
-seria
-seríamos
-seriam
-
-               | forms of ter, to have (not including the infinitive):
-tenho
-tem
-temos
-tém
-tinha
-tínhamos
-tinham
-tive
-teve
-tivemos
-tiveram
-tivera
-tivéramos
-tenha
-tenhamos
-tenham
-tivesse
-tivéssemos
-tivessem
-tiver
-tivermos
-tiverem
-terei
-terá
-teremos
-terão
-teria
-teríamos
-teriam

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_ro.txt b/zookeeper/solr/collection1/conf/lang/stopwords_ro.txt
deleted file mode 100644 (file)
index 4fdee90..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_ro.txt
+++ /dev/null
@@ -1,233 +0,0 @@
-# This file was created by Jacques Savoy and is distributed under the BSD license.
-# See http://members.unine.ch/jacques.savoy/clef/index.html.
-# Also see http://www.opensource.org/licenses/bsd-license.html
-acea
-aceasta
-această
-aceea
-acei
-aceia
-acel
-acela
-acele
-acelea
-acest
-acesta
-aceste
-acestea
-aceşti
-aceştia
-acolo
-acum
-ai
-aia
-aibă
-aici
-al
-ăla
-ale
-alea
-ălea
-altceva
-altcineva
-am
-ar
-are
-aş
-aşadar
-asemenea
-asta
-ăsta
-astăzi
-astea
-ăstea
-ăştia
-asupra
-aţi
-au
-avea
-avem
-aveţi
-azi
-bine
-bucur
-bună
-ca
-că
-căci
-când
-care
-cărei
-căror
-cărui
-cât
-câte
-câţi
-către
-câtva
-ce
-cel
-ceva
-chiar
-cînd
-cine
-cineva
-cît
-cîte
-cîţi
-cîtva
-contra
-cu
-cum
-cumva
-curând
-curînd
-da
-dă
-dacă
-dar
-datorită
-de
-deci
-deja
-deoarece
-departe
-deşi
-din
-dinaintea
-dintr
-dintre
-drept
-după
-ea
-ei
-el
-ele
-eram
-este
-eşti
-eu
-face
-fără
-fi
-fie
-fiecare
-fii
-fim
-fiţi
-iar
-ieri
-îi
-îl
-îmi
-împotriva
-în 
-înainte
-înaintea
-încât
-încît
-încotro
-între
-întrucât
-întrucît
-îţi
-la
-lângă
-le
-li
-lîngă
-lor
-lui
-mă
-mâine
-mea
-mei
-mele
-mereu
-meu
-mi
-mine
-mult
-multă
-mulţi
-ne
-nicăieri
-nici
-nimeni
-nişte
-noastră
-noastre
-noi
-noştri
-nostru
-nu
-ori
-oricând
-oricare
-oricât
-orice
-oricînd
-oricine
-oricît
-oricum
-oriunde
-până
-pe
-pentru
-peste
-pînă
-poate
-pot
-prea
-prima
-primul
-prin
-printr
-sa
-să
-săi
-sale
-sau
-său
-se
-şi
-sînt
-sîntem
-sînteţi
-spre
-sub
-sunt
-suntem
-sunteţi
-ta
-tăi
-tale
-tău
-te
-ţi
-ţie
-tine
-toată
-toate
-tot
-toţi
-totuşi
-tu
-un
-una
-unde
-undeva
-unei
-unele
-uneori
-unor
-vă
-vi
-voastră
-voastre
-voi
-voştri
-vostru
-vouă
-vreo
-vreun

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_ru.txt b/zookeeper/solr/collection1/conf/lang/stopwords_ru.txt
deleted file mode 100644 (file)
index 6430769..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_ru.txt
+++ /dev/null
@@ -1,241 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/russian/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | a russian stop word list. comments begin with vertical bar. each stop
- | word is at the start of a line.
-
- | this is a ranked list (commonest to rarest) of stopwords derived from
- | a large text sample.
-
- | letter `ё' is translated to `е'.
-
-и              | and
-в              | in/into
-во             | alternative form
-не             | not
-что            | what/that
-он             | he
-на             | on/onto
-я              | i
-с              | from
-со             | alternative form
-как            | how
-а              | milder form of `no' (but)
-то             | conjunction and form of `that'
-все            | all
-она            | she
-так            | so, thus
-его            | him
-но             | but
-да             | yes/and
-ты             | thou
-к              | towards, by
-у              | around, chez
-же             | intensifier particle
-вы             | you
-за             | beyond, behind
-бы             | conditional/subj. particle
-по             | up to, along
-только         | only
-ее             | her
-мне            | to me
-было           | it was
-вот            | here is/are, particle
-от             | away from
-меня           | me
-еще            | still, yet, more
-нет            | no, there isnt/arent
-о              | about
-из             | out of
-ему            | to him
-теперь         | now
-когда          | when
-даже           | even
-ну             | so, well
-вдруг          | suddenly
-ли             | interrogative particle
-если           | if
-уже            | already, but homonym of `narrower'
-или            | or
-ни             | neither
-быть           | to be
-был            | he was
-него           | prepositional form of его
-до             | up to
-вас            | you accusative
-нибудь         | indef. suffix preceded by hyphen
-опять          | again
-уж             | already, but homonym of `adder'
-вам            | to you
-сказал         | he said
-ведь           | particle `after all'
-там            | there
-потом          | then
-себя           | oneself
-ничего         | nothing
-ей             | to her
-может          | usually with `быть' as `maybe'
-они            | they
-тут            | here
-где            | where
-есть           | there is/are
-надо           | got to, must
-ней            | prepositional form of  ей
-для            | for
-мы             | we
-тебя           | thee
-их             | them, their
-чем            | than
-была           | she was
-сам            | self
-чтоб           | in order to
-без            | without
-будто          | as if
-человек        | man, person, one
-чего           | genitive form of `what'
-раз            | once
-тоже           | also
-себе           | to oneself
-под            | beneath
-жизнь          | life
-будет          | will be
-ж              | short form of intensifer particle `же'
-тогда          | then
-кто            | who
-этот           | this
-говорил        | was saying
-того           | genitive form of `that'
-потому         | for that reason
-этого          | genitive form of `this'
-какой          | which
-совсем         | altogether
-ним            | prepositional form of `его', `они'
-здесь          | here
-этом           | prepositional form of `этот'
-один           | one
-почти          | almost
-мой            | my
-тем            | instrumental/dative plural of `тот', `то'
-чтобы          | full form of `in order that'
-нее            | her (acc.)
-кажется        | it seems
-сейчас         | now
-были           | they were
-куда           | where to
-зачем          | why
-сказать        | to say
-всех           | all (acc., gen. preposn. plural)
-никогда        | never
-сегодня        | today
-можно          | possible, one can
-при            | by
-наконец        | finally
-два            | two
-об             | alternative form of `о', about
-другой         | another
-хоть           | even
-после          | after
-над            | above
-больше         | more
-тот            | that one (masc.)
-через          | across, in
-эти            | these
-нас            | us
-про            | about
-всего          | in all, only, of all
-них            | prepositional form of `они' (they)
-какая          | which, feminine
-много          | lots
-разве          | interrogative particle
-сказала        | she said
-три            | three
-эту            | this, acc. fem. sing.
-моя            | my, feminine
-впрочем        | moreover, besides
-хорошо         | good
-свою           | ones own, acc. fem. sing.
-этой           | oblique form of `эта', fem. `this'
-перед          | in front of
-иногда         | sometimes
-лучше          | better
-чуть           | a little
-том            | preposn. form of `that one'
-нельзя         | one must not
-такой          | such a one
-им             | to them
-более          | more
-всегда         | always
-конечно        | of course
-всю            | acc. fem. sing of `all'
-между          | between
-
-
-  | b: some paradigms
-  |
-  | personal pronouns
-  |
-  | я  меня  мне  мной  [мною]
-  | ты  тебя  тебе  тобой  [тобою]
-  | он  его  ему  им  [него, нему, ним]
-  | она  ее  эи  ею  [нее, нэи, нею]
-  | оно  его  ему  им  [него, нему, ним]
-  |
-  | мы  нас  нам  нами
-  | вы  вас  вам  вами
-  | они  их  им  ими  [них, ним, ними]
-  |
-  |   себя  себе  собой   [собою]
-  |
-  | demonstrative pronouns: этот (this), тот (that)
-  |
-  | этот  эта  это  эти
-  | этого  эты  это  эти
-  | этого  этой  этого  этих
-  | этому  этой  этому  этим
-  | этим  этой  этим  [этою]  этими
-  | этом  этой  этом  этих
-  |
-  | тот  та  то  те
-  | того  ту  то  те
-  | того  той  того  тех
-  | тому  той  тому  тем
-  | тем  той  тем  [тою]  теми
-  | том  той  том  тех
-  |
-  | determinative pronouns
-  |
-  | (a) весь (all)
-  |
-  | весь  вся  все  все
-  | всего  всю  все  все
-  | всего  всей  всего  всех
-  | всему  всей  всему  всем
-  | всем  всей  всем  [всею]  всеми
-  | всем  всей  всем  всех
-  |
-  | (b) сам (himself etc)
-  |
-  | сам  сама  само  сами
-  | самого саму  само  самих
-  | самого самой самого  самих
-  | самому самой самому  самим
-  | самим  самой  самим  [самою]  самими
-  | самом самой самом  самих
-  |
-  | stems of verbs `to be', `to have', `to do' and modal
-  |
-  | быть  бы  буд  быв  есть  суть
-  | име
-  | дел
-  | мог   мож  мочь
-  | уме
-  | хоч  хот
-  | долж
-  | можн
-  | нужн
-  | нельзя
-

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_sv.txt b/zookeeper/solr/collection1/conf/lang/stopwords_sv.txt
deleted file mode 100644 (file)
index 22bddfd..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_sv.txt
+++ /dev/null
@@ -1,131 +0,0 @@
- | From svn.tartarus.org/snowball/trunk/website/algorithms/swedish/stop.txt
- | This file is distributed under the BSD License.
- | See http://snowball.tartarus.org/license.php
- | Also see http://www.opensource.org/licenses/bsd-license.html
- |  - Encoding was converted to UTF-8.
- |  - This notice was added.
-
- | A Swedish stop word list. Comments begin with vertical bar. Each stop
- | word is at the start of a line.
-
- | This is a ranked list (commonest to rarest) of stopwords derived from
- | a large text sample.
-
- | Swedish stop words occasionally exhibit homonym clashes. For example
- |  så = so, but also seed. These are indicated clearly below.
-
-och            | and
-det            | it, this/that
-att            | to (with infinitive)
-i              | in, at
-en             | a
-jag            | I
-hon            | she
-som            | who, that
-han            | he
-på             | on
-den            | it, this/that
-med            | with
-var            | where, each
-sig            | him(self) etc
-för            | for
-så             | so (also: seed)
-till           | to
-är             | is
-men            | but
-ett            | a
-om             | if; around, about
-hade           | had
-de             | they, these/those
-av             | of
-icke           | not, no
-mig            | me
-du             | you
-henne          | her
-då             | then, when
-sin            | his
-nu             | now
-har            | have
-inte           | inte någon = no one
-hans           | his
-honom          | him
-skulle         | 'sake'
-hennes         | her
-där            | there
-min            | my
-man            | one (pronoun)
-ej             | nor
-vid            | at, by, on (also: vast)
-kunde          | could
-något          | some etc
-från           | from, off
-ut             | out
-när            | when
-efter          | after, behind
-upp            | up
-vi             | we
-dem            | them
-vara           | be
-vad            | what
-över           | over
-än             | than
-dig            | you
-kan            | can
-sina           | his
-här            | here
-ha             | have
-mot            | towards
-alla           | all
-under          | under (also: wonder)
-någon          | some etc
-eller          | or (else)
-allt           | all
-mycket         | much
-sedan          | since
-ju             | why
-denna          | this/that
-själv          | myself, yourself etc
-detta          | this/that
-åt             | to
-utan           | without
-varit          | was
-hur            | how
-ingen          | no
-mitt           | my
-ni             | you
-bli            | to be, become
-blev           | from bli
-oss            | us
-din            | thy
-dessa          | these/those
-några          | some etc
-deras          | their
-blir           | from bli
-mina           | my
-samma          | (the) same
-vilken         | who, that
-er             | you, your
-sådan          | such a
-vår            | our
-blivit         | from bli
-dess           | its
-inom           | within
-mellan         | between
-sådant         | such a
-varför         | why
-varje          | each
-vilka          | who, that
-ditt           | thy
-vem            | who
-vilket         | who, that
-sitta          | his
-sådana         | such a
-vart           | each
-dina           | thy
-vars           | whose
-vårt           | our
-våra           | our
-ert            | your
-era            | your
-vilkas         | whose
-

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_th.txt b/zookeeper/solr/collection1/conf/lang/stopwords_th.txt
deleted file mode 100644 (file)
index 07f0fab..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_th.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-# Thai stopwords from:
-# "Opinion Detection in Thai Political News Columns
-# Based on Subjectivity Analysis"
-# Khampol Sukhum, Supot Nitsuwat, and Choochart Haruechaiyasak
-ไว้
-ไม่
-ไป
-ได้
-ให้
-ใน
-โดย
-แห่ง
-แล้ว
-และ
-แรก
-แบบ
-แต่
-เอง
-เห็น
-เลย
-เริ่ม
-เรา
-เมื่อ
-เพื่อ
-เพราะ
-เป็นการ
-เป็น
-เปิดเผย
-เปิด
-เนื่องจาก
-เดียวกัน
-เดียว
-เช่น
-เฉพาะ
-เคย
-เข้า
-เขา
-อีก
-อาจ
-อะไร
-ออก
-อย่าง
-อยู่
-อยาก
-หาก
-หลาย
-หลังจาก
-หลัง
-หรือ
-หนึ่ง
-ส่วน
-ส่ง
-สุด
-สําหรับ
-ว่า
-วัน
-ลง
-ร่วม
-ราย
-รับ
-ระหว่าง
-รวม
-ยัง
-มี
-มาก
-มา
-พร้อม
-พบ
-ผ่าน
-ผล
-บาง
-น่า
-นี้
-นํา
-นั้น
-นัก
-นอกจาก
-ทุก
-ที่สุด
-ที่
-ทําให้
-ทํา
-ทาง
-ทั้งนี้
-ทั้ง
-ถ้า
-ถูก
-ถึง
-ต้อง
-ต่างๆ
-ต่าง
-ต่อ
-ตาม
-ตั้งแต่
-ตั้ง
-ด้าน
-ด้วย
-ดัง
-ซึ่ง
-ช่วง
-จึง
-จาก
-จัด
-จะ
-คือ
-ความ
-ครั้ง
-คง
-ขึ้น
-ของ
-ขอ
-ขณะ
-ก่อน
-ก็
-การ
-กับ
-กัน
-กว่า
-กล่าว

diff --git a/zookeeper/solr/collection1/conf/lang/stopwords_tr.txt b/zookeeper/solr/collection1/conf/lang/stopwords_tr.txt
deleted file mode 100644 (file)
index 84d9408..0000000
--- a/zookeeper/solr/collection1/conf/lang/stopwords_tr.txt
+++ /dev/null
@@ -1,212 +0,0 @@
-# Turkish stopwords from LUCENE-559
-# merged with the list from "Information Retrieval on Turkish Texts"
-#   (http://www.users.muohio.edu/canf/papers/JASIST2008offPrint.pdf)
-acaba
-altmış
-altı
-ama
-ancak
-arada
-aslında
-ayrıca
-bana
-bazı
-belki
-ben
-benden
-beni
-benim
-beri
-beş
-bile
-bin
-bir
-birçok
-biri
-birkaç
-birkez
-birşey
-birşeyi
-biz
-bize
-bizden
-bizi
-bizim
-böyle
-böylece
-bu
-buna
-bunda
-bundan
-bunlar
-bunları
-bunların
-bunu
-bunun
-burada
-çok
-çünkü
-da
-daha
-dahi
-de
-defa
-değil
-diğer
-diye
-doksan
-dokuz
-dolayı
-dolayısıyla
-dört
-edecek
-eden
-ederek
-edilecek
-ediliyor
-edilmesi
-ediyor
-eğer
-elli
-en
-etmesi
-etti
-ettiği
-ettiğini
-gibi
-göre
-halen
-hangi
-hatta
-hem
-henüz
-hep
-hepsi
-her
-herhangi
-herkesin
-hiç
-hiçbir
-için
-iki
-ile
-ilgili
-ise
-işte
-itibaren
-itibariyle
-kadar
-karşın
-katrilyon
-kendi
-kendilerine
-kendini
-kendisi
-kendisine
-kendisini
-kez
-ki
-kim
-kimden
-kime
-kimi
-kimse
-kırk
-milyar
-milyon
-mu
-mü
-mı
-nasıl
-ne
-neden
-nedenle
-nerde
-nerede
-nereye
-niye
-niçin
-o
-olan
-olarak
-oldu
-olduğu
-olduğunu
-olduklarını
-olmadı
-olmadığı
-olmak
-olması
-olmayan
-olmaz
-olsa
-olsun
-olup
-olur
-olursa
-oluyor
-on
-ona
-ondan
-onlar
-onlardan
-onları
-onların
-onu
-onun
-otuz
-oysa
-öyle
-pek
-rağmen
-sadece
-sanki
-sekiz
-seksen
-sen
-senden
-seni
-senin
-siz
-sizden
-sizi
-sizin
-şey
-şeyden
-şeyi
-şeyler
-şöyle
-şu
-şuna
-şunda
-şundan
-şunları
-şunu
-tarafından
-trilyon
-tüm
-üç
-üzere
-var
-vardı
-ve
-veya
-ya
-yani
-yapacak
-yapılan
-yapılması
-yapıyor
-yapmak
-yaptı
-yaptığı
-yaptığını
-yaptıkları
-yedi
-yerine
-yetmiş
-yine
-yirmi
-yoksa
-yüz
-zaten

diff --git a/zookeeper/solr/collection1/conf/lang/userdict_ja.txt b/zookeeper/solr/collection1/conf/lang/userdict_ja.txt
deleted file mode 100644 (file)
index 6f0368e..0000000
--- a/zookeeper/solr/collection1/conf/lang/userdict_ja.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# This is a sample user dictionary for Kuromoji (JapaneseTokenizer)
-#
-# Add entries to this file in order to override the statistical model in terms
-# of segmentation, readings and part-of-speech tags.  Notice that entries do
-# not have weights since they are always used when found.  This is by-design
-# in order to maximize ease-of-use.
-#
-# Entries are defined using the following CSV format:
-#  <text>,<token 1> ... <token n>,<reading 1> ... <reading n>,<part-of-speech tag>
-#
-# Notice that a single half-width space separates tokens and readings, and
-# that the number tokens and readings must match exactly.
-#
-# Also notice that multiple entries with the same <text> is undefined.
-#
-# Whitespace only lines are ignored.  Comments are not allowed on entry lines.
-#
-
-# Custom segmentation for kanji compounds
-日本経済新聞,日本 経済 新聞,ニホン ケイザイ シンブン,カスタム名詞
-関西国際空港,関西 国際 空港,カンサイ コクサイ クウコウ,カスタム名詞
-
-# Custom segmentation for compound katakana
-トートバッグ,トート バッグ,トート バッグ,かずカナ名詞
-ショルダーバッグ,ショルダー バッグ,ショルダー バッグ,かずカナ名詞
-
-# Custom reading for former sumo wrestler
-朝青龍,朝青龍,アサショウリュウ,カスタム人名

diff --git a/zookeeper/solr/collection1/conf/mapping-FoldToASCII.txt b/zookeeper/solr/collection1/conf/mapping-FoldToASCII.txt
deleted file mode 100644 (file)
index 9a84b6e..0000000
--- a/zookeeper/solr/collection1/conf/mapping-FoldToASCII.txt
+++ /dev/null
@@ -1,3813 +0,0 @@
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-# This map converts alphabetic, numeric, and symbolic Unicode characters
-# which are not in the first 127 ASCII characters (the "Basic Latin" Unicode
-# block) into their ASCII equivalents, if one exists.
-#
-# Characters from the following Unicode blocks are converted; however, only
-# those characters with reasonable ASCII alternatives are converted:
-#
-# - C1 Controls and Latin-1 Supplement: http://www.unicode.org/charts/PDF/U0080.pdf
-# - Latin Extended-A: http://www.unicode.org/charts/PDF/U0100.pdf
-# - Latin Extended-B: http://www.unicode.org/charts/PDF/U0180.pdf
-# - Latin Extended Additional: http://www.unicode.org/charts/PDF/U1E00.pdf
-# - Latin Extended-C: http://www.unicode.org/charts/PDF/U2C60.pdf
-# - Latin Extended-D: http://www.unicode.org/charts/PDF/UA720.pdf
-# - IPA Extensions: http://www.unicode.org/charts/PDF/U0250.pdf
-# - Phonetic Extensions: http://www.unicode.org/charts/PDF/U1D00.pdf
-# - Phonetic Extensions Supplement: http://www.unicode.org/charts/PDF/U1D80.pdf
-# - General Punctuation: http://www.unicode.org/charts/PDF/U2000.pdf
-# - Superscripts and Subscripts: http://www.unicode.org/charts/PDF/U2070.pdf
-# - Enclosed Alphanumerics: http://www.unicode.org/charts/PDF/U2460.pdf
-# - Dingbats: http://www.unicode.org/charts/PDF/U2700.pdf
-# - Supplemental Punctuation: http://www.unicode.org/charts/PDF/U2E00.pdf
-# - Alphabetic Presentation Forms: http://www.unicode.org/charts/PDF/UFB00.pdf
-# - Halfwidth and Fullwidth Forms: http://www.unicode.org/charts/PDF/UFF00.pdf
-#  
-# See: http://en.wikipedia.org/wiki/Latin_characters_in_Unicode
-#
-# The set of character conversions supported by this map is a superset of
-# those supported by the map represented by mapping-ISOLatin1Accent.txt.
-#
-# See the bottom of this file for the Perl script used to generate the contents
-# of this file (without this header) from ASCIIFoldingFilter.java.
-
-
-# Syntax:
-#   "source" => "target"
-#     "source".length() > 0 (source cannot be empty.)
-#     "target".length() >= 0 (target can be empty.)
-
-
-# À  [LATIN CAPITAL LETTER A WITH GRAVE]
-"\u00C0" => "A"
-
-# Á  [LATIN CAPITAL LETTER A WITH ACUTE]
-"\u00C1" => "A"
-
-# Â  [LATIN CAPITAL LETTER A WITH CIRCUMFLEX]
-"\u00C2" => "A"
-
-# Ã  [LATIN CAPITAL LETTER A WITH TILDE]
-"\u00C3" => "A"
-
-# Ä  [LATIN CAPITAL LETTER A WITH DIAERESIS]
-"\u00C4" => "A"
-
-# Å  [LATIN CAPITAL LETTER A WITH RING ABOVE]
-"\u00C5" => "A"
-
-# Ā  [LATIN CAPITAL LETTER A WITH MACRON]
-"\u0100" => "A"
-
-# Ă  [LATIN CAPITAL LETTER A WITH BREVE]
-"\u0102" => "A"
-
-# Ą  [LATIN CAPITAL LETTER A WITH OGONEK]
-"\u0104" => "A"
-
-# Ə  http://en.wikipedia.org/wiki/Schwa  [LATIN CAPITAL LETTER SCHWA]
-"\u018F" => "A"
-
-# Ǎ  [LATIN CAPITAL LETTER A WITH CARON]
-"\u01CD" => "A"
-
-# Ǟ  [LATIN CAPITAL LETTER A WITH DIAERESIS AND MACRON]
-"\u01DE" => "A"
-
-# Ǡ  [LATIN CAPITAL LETTER A WITH DOT ABOVE AND MACRON]
-"\u01E0" => "A"
-
-# Ǻ  [LATIN CAPITAL LETTER A WITH RING ABOVE AND ACUTE]
-"\u01FA" => "A"
-
-# Ȁ  [LATIN CAPITAL LETTER A WITH DOUBLE GRAVE]
-"\u0200" => "A"
-
-# Ȃ  [LATIN CAPITAL LETTER A WITH INVERTED BREVE]
-"\u0202" => "A"
-
-# Ȧ  [LATIN CAPITAL LETTER A WITH DOT ABOVE]
-"\u0226" => "A"
-
-# Ⱥ  [LATIN CAPITAL LETTER A WITH STROKE]
-"\u023A" => "A"
-
-# ᴀ  [LATIN LETTER SMALL CAPITAL A]
-"\u1D00" => "A"
-
-# Ḁ  [LATIN CAPITAL LETTER A WITH RING BELOW]
-"\u1E00" => "A"
-
-# Ạ  [LATIN CAPITAL LETTER A WITH DOT BELOW]
-"\u1EA0" => "A"
-
-# Ả  [LATIN CAPITAL LETTER A WITH HOOK ABOVE]
-"\u1EA2" => "A"
-
-# Ấ  [LATIN CAPITAL LETTER A WITH CIRCUMFLEX AND ACUTE]
-"\u1EA4" => "A"
-
-# Ầ  [LATIN CAPITAL LETTER A WITH CIRCUMFLEX AND GRAVE]
-"\u1EA6" => "A"
-
-# Ẩ  [LATIN CAPITAL LETTER A WITH CIRCUMFLEX AND HOOK ABOVE]
-"\u1EA8" => "A"
-
-# Ẫ  [LATIN CAPITAL LETTER A WITH CIRCUMFLEX AND TILDE]
-"\u1EAA" => "A"
-
-# Ậ  [LATIN CAPITAL LETTER A WITH CIRCUMFLEX AND DOT BELOW]
-"\u1EAC" => "A"
-
-# Ắ  [LATIN CAPITAL LETTER A WITH BREVE AND ACUTE]
-"\u1EAE" => "A"
-
-# Ằ  [LATIN CAPITAL LETTER A WITH BREVE AND GRAVE]
-"\u1EB0" => "A"
-
-# Ẳ  [LATIN CAPITAL LETTER A WITH BREVE AND HOOK ABOVE]
-"\u1EB2" => "A"
-
-# Ẵ  [LATIN CAPITAL LETTER A WITH BREVE AND TILDE]
-"\u1EB4" => "A"
-
-# Ặ  [LATIN CAPITAL LETTER A WITH BREVE AND DOT BELOW]
-"\u1EB6" => "A"
-
-# Ⓐ  [CIRCLED LATIN CAPITAL LETTER A]
-"\u24B6" => "A"
-
-# Ａ  [FULLWIDTH LATIN CAPITAL LETTER A]
-"\uFF21" => "A"
-
-# à  [LATIN SMALL LETTER A WITH GRAVE]
-"\u00E0" => "a"
-
-# á  [LATIN SMALL LETTER A WITH ACUTE]
-"\u00E1" => "a"
-
-# â  [LATIN SMALL LETTER A WITH CIRCUMFLEX]
-"\u00E2" => "a"
-
-# ã  [LATIN SMALL LETTER A WITH TILDE]
-"\u00E3" => "a"
-
-# ä  [LATIN SMALL LETTER A WITH DIAERESIS]
-"\u00E4" => "a"
-
-# å  [LATIN SMALL LETTER A WITH RING ABOVE]
-"\u00E5" => "a"
-
-# ā  [LATIN SMALL LETTER A WITH MACRON]
-"\u0101" => "a"
-
-# ă  [LATIN SMALL LETTER A WITH BREVE]
-"\u0103" => "a"
-
-# ą  [LATIN SMALL LETTER A WITH OGONEK]
-"\u0105" => "a"
-
-# ǎ  [LATIN SMALL LETTER A WITH CARON]
-"\u01CE" => "a"
-
-# ǟ  [LATIN SMALL LETTER A WITH DIAERESIS AND MACRON]
-"\u01DF" => "a"
-
-# ǡ  [LATIN SMALL LETTER A WITH DOT ABOVE AND MACRON]
-"\u01E1" => "a"
-
-# ǻ  [LATIN SMALL LETTER A WITH RING ABOVE AND ACUTE]
-"\u01FB" => "a"
-
-# ȁ  [LATIN SMALL LETTER A WITH DOUBLE GRAVE]
-"\u0201" => "a"
-
-# ȃ  [LATIN SMALL LETTER A WITH INVERTED BREVE]
-"\u0203" => "a"
-
-# ȧ  [LATIN SMALL LETTER A WITH DOT ABOVE]
-"\u0227" => "a"
-
-# ɐ  [LATIN SMALL LETTER TURNED A]
-"\u0250" => "a"
-
-# ə  [LATIN SMALL LETTER SCHWA]
-"\u0259" => "a"
-
-# ɚ  [LATIN SMALL LETTER SCHWA WITH HOOK]
-"\u025A" => "a"
-
-# ᶏ  [LATIN SMALL LETTER A WITH RETROFLEX HOOK]
-"\u1D8F" => "a"
-
-# ᶕ  [LATIN SMALL LETTER SCHWA WITH RETROFLEX HOOK]
-"\u1D95" => "a"
-
-# ạ  [LATIN SMALL LETTER A WITH RING BELOW]
-"\u1E01" => "a"
-
-# ả  [LATIN SMALL LETTER A WITH RIGHT HALF RING]
-"\u1E9A" => "a"
-
-# ạ  [LATIN SMALL LETTER A WITH DOT BELOW]
-"\u1EA1" => "a"
-
-# ả  [LATIN SMALL LETTER A WITH HOOK ABOVE]
-"\u1EA3" => "a"
-
-# ấ  [LATIN SMALL LETTER A WITH CIRCUMFLEX AND ACUTE]
-"\u1EA5" => "a"
-
-# ầ  [LATIN SMALL LETTER A WITH CIRCUMFLEX AND GRAVE]
-"\u1EA7" => "a"
-
-# ẩ  [LATIN SMALL LETTER A WITH CIRCUMFLEX AND HOOK ABOVE]
-"\u1EA9" => "a"
-
-# ẫ  [LATIN SMALL LETTER A WITH CIRCUMFLEX AND TILDE]
-"\u1EAB" => "a"
-
-# ậ  [LATIN SMALL LETTER A WITH CIRCUMFLEX AND DOT BELOW]
-"\u1EAD" => "a"
-
-# ắ  [LATIN SMALL LETTER A WITH BREVE AND ACUTE]
-"\u1EAF" => "a"
-
-# ằ  [LATIN SMALL LETTER A WITH BREVE AND GRAVE]
-"\u1EB1" => "a"
-
-# ẳ  [LATIN SMALL LETTER A WITH BREVE AND HOOK ABOVE]
-"\u1EB3" => "a"
-
-# ẵ  [LATIN SMALL LETTER A WITH BREVE AND TILDE]
-"\u1EB5" => "a"
-
-# ặ  [LATIN SMALL LETTER A WITH BREVE AND DOT BELOW]
-"\u1EB7" => "a"
-
-# ₐ  [LATIN SUBSCRIPT SMALL LETTER A]
-"\u2090" => "a"
-
-# ₔ  [LATIN SUBSCRIPT SMALL LETTER SCHWA]
-"\u2094" => "a"
-
-# ⓐ  [CIRCLED LATIN SMALL LETTER A]
-"\u24D0" => "a"
-
-# ⱥ  [LATIN SMALL LETTER A WITH STROKE]
-"\u2C65" => "a"
-
-# Ɐ  [LATIN CAPITAL LETTER TURNED A]
-"\u2C6F" => "a"
-
-# ａ  [FULLWIDTH LATIN SMALL LETTER A]
-"\uFF41" => "a"
-
-# Ꜳ  [LATIN CAPITAL LETTER AA]
-"\uA732" => "AA"
-
-# Æ  [LATIN CAPITAL LETTER AE]
-"\u00C6" => "AE"
-
-# Ǣ  [LATIN CAPITAL LETTER AE WITH MACRON]
-"\u01E2" => "AE"
-
-# Ǽ  [LATIN CAPITAL LETTER AE WITH ACUTE]
-"\u01FC" => "AE"
-
-# ᴁ  [LATIN LETTER SMALL CAPITAL AE]
-"\u1D01" => "AE"
-
-# Ꜵ  [LATIN CAPITAL LETTER AO]
-"\uA734" => "AO"
-
-# Ꜷ  [LATIN CAPITAL LETTER AU]
-"\uA736" => "AU"
-
-# Ꜹ  [LATIN CAPITAL LETTER AV]
-"\uA738" => "AV"
-
-# Ꜻ  [LATIN CAPITAL LETTER AV WITH HORIZONTAL BAR]
-"\uA73A" => "AV"
-
-# Ꜽ  [LATIN CAPITAL LETTER AY]
-"\uA73C" => "AY"
-
-# ⒜  [PARENTHESIZED LATIN SMALL LETTER A]
-"\u249C" => "(a)"
-
-# ꜳ  [LATIN SMALL LETTER AA]
-"\uA733" => "aa"
-
-# æ  [LATIN SMALL LETTER AE]
-"\u00E6" => "ae"
-
-# ǣ  [LATIN SMALL LETTER AE WITH MACRON]
-"\u01E3" => "ae"
-
-# ǽ  [LATIN SMALL LETTER AE WITH ACUTE]
-"\u01FD" => "ae"
-
-# ᴂ  [LATIN SMALL LETTER TURNED AE]
-"\u1D02" => "ae"
-
-# ꜵ  [LATIN SMALL LETTER AO]
-"\uA735" => "ao"
-
-# ꜷ  [LATIN SMALL LETTER AU]
-"\uA737" => "au"
-
-# ꜹ  [LATIN SMALL LETTER AV]
-"\uA739" => "av"
-
-# ꜻ  [LATIN SMALL LETTER AV WITH HORIZONTAL BAR]
-"\uA73B" => "av"
-
-# ꜽ  [LATIN SMALL LETTER AY]
-"\uA73D" => "ay"
-
-# Ɓ  [LATIN CAPITAL LETTER B WITH HOOK]
-"\u0181" => "B"
-
-# Ƃ  [LATIN CAPITAL LETTER B WITH TOPBAR]
-"\u0182" => "B"
-
-# Ƀ  [LATIN CAPITAL LETTER B WITH STROKE]
-"\u0243" => "B"
-
-# ʙ  [LATIN LETTER SMALL CAPITAL B]
-"\u0299" => "B"
-
-# ᴃ  [LATIN LETTER SMALL CAPITAL BARRED B]
-"\u1D03" => "B"
-
-# Ḃ  [LATIN CAPITAL LETTER B WITH DOT ABOVE]
-"\u1E02" => "B"
-
-# Ḅ  [LATIN CAPITAL LETTER B WITH DOT BELOW]
-"\u1E04" => "B"
-
-# Ḇ  [LATIN CAPITAL LETTER B WITH LINE BELOW]
-"\u1E06" => "B"
-
-# Ⓑ  [CIRCLED LATIN CAPITAL LETTER B]
-"\u24B7" => "B"
-
-# Ｂ  [FULLWIDTH LATIN CAPITAL LETTER B]
-"\uFF22" => "B"
-
-# ƀ  [LATIN SMALL LETTER B WITH STROKE]
-"\u0180" => "b"
-
-# ƃ  [LATIN SMALL LETTER B WITH TOPBAR]
-"\u0183" => "b"
-
-# ɓ  [LATIN SMALL LETTER B WITH HOOK]
-"\u0253" => "b"
-
-# ᵬ  [LATIN SMALL LETTER B WITH MIDDLE TILDE]
-"\u1D6C" => "b"
-
-# ᶀ  [LATIN SMALL LETTER B WITH PALATAL HOOK]
-"\u1D80" => "b"
-
-# ḃ  [LATIN SMALL LETTER B WITH DOT ABOVE]
-"\u1E03" => "b"
-
-# ḅ  [LATIN SMALL LETTER B WITH DOT BELOW]
-"\u1E05" => "b"
-
-# ḇ  [LATIN SMALL LETTER B WITH LINE BELOW]
-"\u1E07" => "b"
-
-# ⓑ  [CIRCLED LATIN SMALL LETTER B]
-"\u24D1" => "b"
-
-# ｂ  [FULLWIDTH LATIN SMALL LETTER B]
-"\uFF42" => "b"
-
-# ⒝  [PARENTHESIZED LATIN SMALL LETTER B]
-"\u249D" => "(b)"
-
-# Ç  [LATIN CAPITAL LETTER C WITH CEDILLA]
-"\u00C7" => "C"
-
-# Ć  [LATIN CAPITAL LETTER C WITH ACUTE]
-"\u0106" => "C"
-
-# Ĉ  [LATIN CAPITAL LETTER C WITH CIRCUMFLEX]
-"\u0108" => "C"
-
-# Ċ  [LATIN CAPITAL LETTER C WITH DOT ABOVE]
-"\u010A" => "C"
-
-# Č  [LATIN CAPITAL LETTER C WITH CARON]
-"\u010C" => "C"
-
-# Ƈ  [LATIN CAPITAL LETTER C WITH HOOK]
-"\u0187" => "C"
-
-# Ȼ  [LATIN CAPITAL LETTER C WITH STROKE]
-"\u023B" => "C"
-
-# ʗ  [LATIN LETTER STRETCHED C]
-"\u0297" => "C"
-
-# ᴄ  [LATIN LETTER SMALL CAPITAL C]
-"\u1D04" => "C"
-
-# Ḉ  [LATIN CAPITAL LETTER C WITH CEDILLA AND ACUTE]
-"\u1E08" => "C"
-
-# Ⓒ  [CIRCLED LATIN CAPITAL LETTER C]
-"\u24B8" => "C"
-
-# Ｃ  [FULLWIDTH LATIN CAPITAL LETTER C]
-"\uFF23" => "C"
-
-# ç  [LATIN SMALL LETTER C WITH CEDILLA]
-"\u00E7" => "c"
-
-# ć  [LATIN SMALL LETTER C WITH ACUTE]
-"\u0107" => "c"
-
-# ĉ  [LATIN SMALL LETTER C WITH CIRCUMFLEX]
-"\u0109" => "c"
-
-# ċ  [LATIN SMALL LETTER C WITH DOT ABOVE]
-"\u010B" => "c"
-
-# č  [LATIN SMALL LETTER C WITH CARON]
-"\u010D" => "c"
-
-# ƈ  [LATIN SMALL LETTER C WITH HOOK]
-"\u0188" => "c"
-
-# ȼ  [LATIN SMALL LETTER C WITH STROKE]
-"\u023C" => "c"
-
-# ɕ  [LATIN SMALL LETTER C WITH CURL]
-"\u0255" => "c"
-
-# ḉ  [LATIN SMALL LETTER C WITH CEDILLA AND ACUTE]
-"\u1E09" => "c"
-
-# ↄ  [LATIN SMALL LETTER REVERSED C]
-"\u2184" => "c"
-
-# ⓒ  [CIRCLED LATIN SMALL LETTER C]
-"\u24D2" => "c"
-
-# Ꜿ  [LATIN CAPITAL LETTER REVERSED C WITH DOT]
-"\uA73E" => "c"
-
-# ꜿ  [LATIN SMALL LETTER REVERSED C WITH DOT]
-"\uA73F" => "c"
-
-# ｃ  [FULLWIDTH LATIN SMALL LETTER C]
-"\uFF43" => "c"
-
-# ⒞  [PARENTHESIZED LATIN SMALL LETTER C]
-"\u249E" => "(c)"
-
-# Ð  [LATIN CAPITAL LETTER ETH]
-"\u00D0" => "D"
-
-# Ď  [LATIN CAPITAL LETTER D WITH CARON]
-"\u010E" => "D"
-
-# Đ  [LATIN CAPITAL LETTER D WITH STROKE]
-"\u0110" => "D"
-
-# Ɖ  [LATIN CAPITAL LETTER AFRICAN D]
-"\u0189" => "D"
-
-# Ɗ  [LATIN CAPITAL LETTER D WITH HOOK]
-"\u018A" => "D"
-
-# Ƌ  [LATIN CAPITAL LETTER D WITH TOPBAR]
-"\u018B" => "D"
-
-# ᴅ  [LATIN LETTER SMALL CAPITAL D]
-"\u1D05" => "D"
-
-# ᴆ  [LATIN LETTER SMALL CAPITAL ETH]
-"\u1D06" => "D"
-
-# Ḋ  [LATIN CAPITAL LETTER D WITH DOT ABOVE]
-"\u1E0A" => "D"
-
-# Ḍ  [LATIN CAPITAL LETTER D WITH DOT BELOW]
-"\u1E0C" => "D"
-
-# Ḏ  [LATIN CAPITAL LETTER D WITH LINE BELOW]
-"\u1E0E" => "D"
-
-# Ḑ  [LATIN CAPITAL LETTER D WITH CEDILLA]
-"\u1E10" => "D"
-
-# Ḓ  [LATIN CAPITAL LETTER D WITH CIRCUMFLEX BELOW]
-"\u1E12" => "D"
-
-# Ⓓ  [CIRCLED LATIN CAPITAL LETTER D]
-"\u24B9" => "D"
-
-# Ꝺ  [LATIN CAPITAL LETTER INSULAR D]
-"\uA779" => "D"
-
-# Ｄ  [FULLWIDTH LATIN CAPITAL LETTER D]
-"\uFF24" => "D"
-
-# ð  [LATIN SMALL LETTER ETH]
-"\u00F0" => "d"
-
-# ď  [LATIN SMALL LETTER D WITH CARON]
-"\u010F" => "d"
-
-# đ  [LATIN SMALL LETTER D WITH STROKE]
-"\u0111" => "d"
-
-# ƌ  [LATIN SMALL LETTER D WITH TOPBAR]
-"\u018C" => "d"
-
-# ȡ  [LATIN SMALL LETTER D WITH CURL]
-"\u0221" => "d"
-
-# ɖ  [LATIN SMALL LETTER D WITH TAIL]
-"\u0256" => "d"
-
-# ɗ  [LATIN SMALL LETTER D WITH HOOK]
-"\u0257" => "d"
-
-# ᵭ  [LATIN SMALL LETTER D WITH MIDDLE TILDE]
-"\u1D6D" => "d"
-
-# ᶁ  [LATIN SMALL LETTER D WITH PALATAL HOOK]
-"\u1D81" => "d"
-
-# ᶑ  [LATIN SMALL LETTER D WITH HOOK AND TAIL]
-"\u1D91" => "d"
-
-# ḋ  [LATIN SMALL LETTER D WITH DOT ABOVE]
-"\u1E0B" => "d"
-
-# ḍ  [LATIN SMALL LETTER D WITH DOT BELOW]
-"\u1E0D" => "d"
-
-# ḏ  [LATIN SMALL LETTER D WITH LINE BELOW]
-"\u1E0F" => "d"
-
-# ḑ  [LATIN SMALL LETTER D WITH CEDILLA]
-"\u1E11" => "d"
-
-# ḓ  [LATIN SMALL LETTER D WITH CIRCUMFLEX BELOW]
-"\u1E13" => "d"
-
-# ⓓ  [CIRCLED LATIN SMALL LETTER D]
-"\u24D3" => "d"
-
-# ꝺ  [LATIN SMALL LETTER INSULAR D]
-"\uA77A" => "d"
-
-# ｄ  [FULLWIDTH LATIN SMALL LETTER D]
-"\uFF44" => "d"
-
-# DŽ  [LATIN CAPITAL LETTER DZ WITH CARON]
-"\u01C4" => "DZ"
-
-# DZ  [LATIN CAPITAL LETTER DZ]
-"\u01F1" => "DZ"
-
-# Dž  [LATIN CAPITAL LETTER D WITH SMALL LETTER Z WITH CARON]
-"\u01C5" => "Dz"
-
-# Dz  [LATIN CAPITAL LETTER D WITH SMALL LETTER Z]
-"\u01F2" => "Dz"
-
-# ⒟  [PARENTHESIZED LATIN SMALL LETTER D]
-"\u249F" => "(d)"
-
-# ȸ  [LATIN SMALL LETTER DB DIGRAPH]
-"\u0238" => "db"
-
-# dž  [LATIN SMALL LETTER DZ WITH CARON]
-"\u01C6" => "dz"
-
-# dz  [LATIN SMALL LETTER DZ]
-"\u01F3" => "dz"
-
-# ʣ  [LATIN SMALL LETTER DZ DIGRAPH]
-"\u02A3" => "dz"
-
-# ʥ  [LATIN SMALL LETTER DZ DIGRAPH WITH CURL]
-"\u02A5" => "dz"
-
-# È  [LATIN CAPITAL LETTER E WITH GRAVE]
-"\u00C8" => "E"
-
-# É  [LATIN CAPITAL LETTER E WITH ACUTE]
-"\u00C9" => "E"
-
-# Ê  [LATIN CAPITAL LETTER E WITH CIRCUMFLEX]
-"\u00CA" => "E"
-
-# Ë  [LATIN CAPITAL LETTER E WITH DIAERESIS]
-"\u00CB" => "E"
-
-# Ē  [LATIN CAPITAL LETTER E WITH MACRON]
-"\u0112" => "E"
-
-# Ĕ  [LATIN CAPITAL LETTER E WITH BREVE]
-"\u0114" => "E"
-
-# Ė  [LATIN CAPITAL LETTER E WITH DOT ABOVE]
-"\u0116" => "E"
-
-# Ę  [LATIN CAPITAL LETTER E WITH OGONEK]
-"\u0118" => "E"
-
-# Ě  [LATIN CAPITAL LETTER E WITH CARON]
-"\u011A" => "E"
-
-# Ǝ  [LATIN CAPITAL LETTER REVERSED E]
-"\u018E" => "E"
-
-# Ɛ  [LATIN CAPITAL LETTER OPEN E]
-"\u0190" => "E"
-
-# Ȅ  [LATIN CAPITAL LETTER E WITH DOUBLE GRAVE]
-"\u0204" => "E"
-
-# Ȇ  [LATIN CAPITAL LETTER E WITH INVERTED BREVE]
-"\u0206" => "E"
-
-# Ȩ  [LATIN CAPITAL LETTER E WITH CEDILLA]
-"\u0228" => "E"
-
-# Ɇ  [LATIN CAPITAL LETTER E WITH STROKE]
-"\u0246" => "E"
-
-# ᴇ  [LATIN LETTER SMALL CAPITAL E]
-"\u1D07" => "E"
-
-# Ḕ  [LATIN CAPITAL LETTER E WITH MACRON AND GRAVE]
-"\u1E14" => "E"
-
-# Ḗ  [LATIN CAPITAL LETTER E WITH MACRON AND ACUTE]
-"\u1E16" => "E"
-
-# Ḙ  [LATIN CAPITAL LETTER E WITH CIRCUMFLEX BELOW]
-"\u1E18" => "E"
-
-# Ḛ  [LATIN CAPITAL LETTER E WITH TILDE BELOW]
-"\u1E1A" => "E"
-
-# Ḝ  [LATIN CAPITAL LETTER E WITH CEDILLA AND BREVE]
-"\u1E1C" => "E"
-
-# Ẹ  [LATIN CAPITAL LETTER E WITH DOT BELOW]
-"\u1EB8" => "E"
-
-# Ẻ  [LATIN CAPITAL LETTER E WITH HOOK ABOVE]
-"\u1EBA" => "E"
-
-# Ẽ  [LATIN CAPITAL LETTER E WITH TILDE]
-"\u1EBC" => "E"
-
-# Ế  [LATIN CAPITAL LETTER E WITH CIRCUMFLEX AND ACUTE]
-"\u1EBE" => "E"
-
-# Ề  [LATIN CAPITAL LETTER E WITH CIRCUMFLEX AND GRAVE]
-"\u1EC0" => "E"
-
-# Ể  [LATIN CAPITAL LETTER E WITH CIRCUMFLEX AND HOOK ABOVE]
-"\u1EC2" => "E"
-
-# Ễ  [LATIN CAPITAL LETTER E WITH CIRCUMFLEX AND TILDE]
-"\u1EC4" => "E"
-
-# Ệ  [LATIN CAPITAL LETTER E WITH CIRCUMFLEX AND DOT BELOW]
-"\u1EC6" => "E"
-
-# Ⓔ  [CIRCLED LATIN CAPITAL LETTER E]
-"\u24BA" => "E"
-
-# ⱻ  [LATIN LETTER SMALL CAPITAL TURNED E]
-"\u2C7B" => "E"
-
-# Ｅ  [FULLWIDTH LATIN CAPITAL LETTER E]
-"\uFF25" => "E"
-
-# è  [LATIN SMALL LETTER E WITH GRAVE]
-"\u00E8" => "e"
-
-# é  [LATIN SMALL LETTER E WITH ACUTE]
-"\u00E9" => "e"
-
-# ê  [LATIN SMALL LETTER E WITH CIRCUMFLEX]
-"\u00EA" => "e"
-
-# ë  [LATIN SMALL LETTER E WITH DIAERESIS]
-"\u00EB" => "e"
-
-# ē  [LATIN SMALL LETTER E WITH MACRON]
-"\u0113" => "e"
-
-# ĕ  [LATIN SMALL LETTER E WITH BREVE]
-"\u0115" => "e"
-
-# ė  [LATIN SMALL LETTER E WITH DOT ABOVE]
-"\u0117" => "e"
-
-# ę  [LATIN SMALL LETTER E WITH OGONEK]
-"\u0119" => "e"
-
-# ě  [LATIN SMALL LETTER E WITH CARON]
-"\u011B" => "e"
-
-# ǝ  [LATIN SMALL LETTER TURNED E]
-"\u01DD" => "e"
-
-# ȅ  [LATIN SMALL LETTER E WITH DOUBLE GRAVE]
-"\u0205" => "e"
-
-# ȇ  [LATIN SMALL LETTER E WITH INVERTED BREVE]
-"\u0207" => "e"
-
-# ȩ  [LATIN SMALL LETTER E WITH CEDILLA]
-"\u0229" => "e"
-
-# ɇ  [LATIN SMALL LETTER E WITH STROKE]
-"\u0247" => "e"
-
-# ɘ  [LATIN SMALL LETTER REVERSED E]
-"\u0258" => "e"
-
-# ɛ  [LATIN SMALL LETTER OPEN E]
-"\u025B" => "e"
-
-# ɜ  [LATIN SMALL LETTER REVERSED OPEN E]
-"\u025C" => "e"
-
-# ɝ  [LATIN SMALL LETTER REVERSED OPEN E WITH HOOK]
-"\u025D" => "e"
-
-# ɞ  [LATIN SMALL LETTER CLOSED REVERSED OPEN E]
-"\u025E" => "e"
-
-# ʚ  [LATIN SMALL LETTER CLOSED OPEN E]
-"\u029A" => "e"
-
-# ᴈ  [LATIN SMALL LETTER TURNED OPEN E]
-"\u1D08" => "e"
-
-# ᶒ  [LATIN SMALL LETTER E WITH RETROFLEX HOOK]
-"\u1D92" => "e"
-
-# ᶓ  [LATIN SMALL LETTER OPEN E WITH RETROFLEX HOOK]
-"\u1D93" => "e"
-
-# ᶔ  [LATIN SMALL LETTER REVERSED OPEN E WITH RETROFLEX HOOK]
-"\u1D94" => "e"
-
-# ḕ  [LATIN SMALL LETTER E WITH MACRON AND GRAVE]
-"\u1E15" => "e"
-
-# ḗ  [LATIN SMALL LETTER E WITH MACRON AND ACUTE]
-"\u1E17" => "e"
-
-# ḙ  [LATIN SMALL LETTER E WITH CIRCUMFLEX BELOW]
-"\u1E19" => "e"
-
-# ḛ  [LATIN SMALL LETTER E WITH TILDE BELOW]
-"\u1E1B" => "e"
-
-# ḝ  [LATIN SMALL LETTER E WITH CEDILLA AND BREVE]
-"\u1E1D" => "e"
-
-# ẹ  [LATIN SMALL LETTER E WITH DOT BELOW]
-"\u1EB9" => "e"
-
-# ẻ  [LATIN SMALL LETTER E WITH HOOK ABOVE]
-"\u1EBB" => "e"
-
-# ẽ  [LATIN SMALL LETTER E WITH TILDE]
-"\u1EBD" => "e"
-
-# ế  [LATIN SMALL LETTER E WITH CIRCUMFLEX AND ACUTE]
-"\u1EBF" => "e"
-
-# ề  [LATIN SMALL LETTER E WITH CIRCUMFLEX AND GRAVE]
-"\u1EC1" => "e"
-
-# ể  [LATIN SMALL LETTER E WITH CIRCUMFLEX AND HOOK ABOVE]
-"\u1EC3" => "e"
-
-# ễ  [LATIN SMALL LETTER E WITH CIRCUMFLEX AND TILDE]
-"\u1EC5" => "e"
-
-# ệ  [LATIN SMALL LETTER E WITH CIRCUMFLEX AND DOT BELOW]
-"\u1EC7" => "e"
-
-# ₑ  [LATIN SUBSCRIPT SMALL LETTER E]
-"\u2091" => "e"
-
-# ⓔ  [CIRCLED LATIN SMALL LETTER E]
-"\u24D4" => "e"
-
-# ⱸ  [LATIN SMALL LETTER E WITH NOTCH]
-"\u2C78" => "e"
-
-# ｅ  [FULLWIDTH LATIN SMALL LETTER E]
-"\uFF45" => "e"
-
-# ⒠  [PARENTHESIZED LATIN SMALL LETTER E]
-"\u24A0" => "(e)"
-
-# Ƒ  [LATIN CAPITAL LETTER F WITH HOOK]
-"\u0191" => "F"
-
-# Ḟ  [LATIN CAPITAL LETTER F WITH DOT ABOVE]
-"\u1E1E" => "F"
-
-# Ⓕ  [CIRCLED LATIN CAPITAL LETTER F]
-"\u24BB" => "F"
-
-# ꜰ  [LATIN LETTER SMALL CAPITAL F]
-"\uA730" => "F"
-
-# Ꝼ  [LATIN CAPITAL LETTER INSULAR F]
-"\uA77B" => "F"
-
-# ꟻ  [LATIN EPIGRAPHIC LETTER REVERSED F]
-"\uA7FB" => "F"
-
-# Ｆ  [FULLWIDTH LATIN CAPITAL LETTER F]
-"\uFF26" => "F"
-
-# ƒ  [LATIN SMALL LETTER F WITH HOOK]
-"\u0192" => "f"
-
-# ᵮ  [LATIN SMALL LETTER F WITH MIDDLE TILDE]
-"\u1D6E" => "f"
-
-# ᶂ  [LATIN SMALL LETTER F WITH PALATAL HOOK]
-"\u1D82" => "f"
-
-# ḟ  [LATIN SMALL LETTER F WITH DOT ABOVE]
-"\u1E1F" => "f"
-
-# ẛ  [LATIN SMALL LETTER LONG S WITH DOT ABOVE]
-"\u1E9B" => "f"
-
-# ⓕ  [CIRCLED LATIN SMALL LETTER F]
-"\u24D5" => "f"
-
-# ꝼ  [LATIN SMALL LETTER INSULAR F]
-"\uA77C" => "f"
-
-# ｆ  [FULLWIDTH LATIN SMALL LETTER F]
-"\uFF46" => "f"
-
-# ⒡  [PARENTHESIZED LATIN SMALL LETTER F]
-"\u24A1" => "(f)"
-
-# ff  [LATIN SMALL LIGATURE FF]
-"\uFB00" => "ff"
-
-# ffi  [LATIN SMALL LIGATURE FFI]
-"\uFB03" => "ffi"
-
-# ffl  [LATIN SMALL LIGATURE FFL]
-"\uFB04" => "ffl"
-
-# fi  [LATIN SMALL LIGATURE FI]
-"\uFB01" => "fi"
-
-# fl  [LATIN SMALL LIGATURE FL]
-"\uFB02" => "fl"
-
-# Ĝ  [LATIN CAPITAL LETTER G WITH CIRCUMFLEX]
-"\u011C" => "G"
-
-# Ğ  [LATIN CAPITAL LETTER G WITH BREVE]
-"\u011E" => "G"
-
-# Ġ  [LATIN CAPITAL LETTER G WITH DOT ABOVE]
-"\u0120" => "G"
-
-# Ģ  [LATIN CAPITAL LETTER G WITH CEDILLA]
-"\u0122" => "G"
-
-# Ɠ  [LATIN CAPITAL LETTER G WITH HOOK]
-"\u0193" => "G"
-
-# Ǥ  [LATIN CAPITAL LETTER G WITH STROKE]
-"\u01E4" => "G"
-
-# ǥ  [LATIN SMALL LETTER G WITH STROKE]
-"\u01E5" => "G"
-
-# Ǧ  [LATIN CAPITAL LETTER G WITH CARON]
-"\u01E6" => "G"
-
-# ǧ  [LATIN SMALL LETTER G WITH CARON]
-"\u01E7" => "G"
-
-# Ǵ  [LATIN CAPITAL LETTER G WITH ACUTE]
-"\u01F4" => "G"
-
-# ɢ  [LATIN LETTER SMALL CAPITAL G]
-"\u0262" => "G"
-
-# ʛ  [LATIN LETTER SMALL CAPITAL G WITH HOOK]
-"\u029B" => "G"
-
-# Ḡ  [LATIN CAPITAL LETTER G WITH MACRON]
-"\u1E20" => "G"
-
-# Ⓖ  [CIRCLED LATIN CAPITAL LETTER G]
-"\u24BC" => "G"
-
-# Ᵹ  [LATIN CAPITAL LETTER INSULAR G]
-"\uA77D" => "G"
-
-# Ꝿ  [LATIN CAPITAL LETTER TURNED INSULAR G]
-"\uA77E" => "G"
-
-# Ｇ  [FULLWIDTH LATIN CAPITAL LETTER G]
-"\uFF27" => "G"
-
-# ĝ  [LATIN SMALL LETTER G WITH CIRCUMFLEX]
-"\u011D" => "g"
-
-# ğ  [LATIN SMALL LETTER G WITH BREVE]
-"\u011F" => "g"
-
-# ġ  [LATIN SMALL LETTER G WITH DOT ABOVE]
-"\u0121" => "g"
-
-# ģ  [LATIN SMALL LETTER G WITH CEDILLA]
-"\u0123" => "g"
-
-# ǵ  [LATIN SMALL LETTER G WITH ACUTE]
-"\u01F5" => "g"
-
-# ɠ  [LATIN SMALL LETTER G WITH HOOK]
-"\u0260" => "g"
-
-# ɡ  [LATIN SMALL LETTER SCRIPT G]
-"\u0261" => "g"
-
-# ᵷ  [LATIN SMALL LETTER TURNED G]
-"\u1D77" => "g"
-
-# ᵹ  [LATIN SMALL LETTER INSULAR G]
-"\u1D79" => "g"
-
-# ᶃ  [LATIN SMALL LETTER G WITH PALATAL HOOK]
-"\u1D83" => "g"
-
-# ḡ  [LATIN SMALL LETTER G WITH MACRON]
-"\u1E21" => "g"
-
-# ⓖ  [CIRCLED LATIN SMALL LETTER G]
-"\u24D6" => "g"
-
-# ꝿ  [LATIN SMALL LETTER TURNED INSULAR G]
-"\uA77F" => "g"
-
-# ｇ  [FULLWIDTH LATIN SMALL LETTER G]
-"\uFF47" => "g"
-
-# ⒢  [PARENTHESIZED LATIN SMALL LETTER G]
-"\u24A2" => "(g)"
-
-# Ĥ  [LATIN CAPITAL LETTER H WITH CIRCUMFLEX]
-"\u0124" => "H"
-
-# Ħ  [LATIN CAPITAL LETTER H WITH STROKE]
-"\u0126" => "H"
-
-# Ȟ  [LATIN CAPITAL LETTER H WITH CARON]
-"\u021E" => "H"
-
-# ʜ  [LATIN LETTER SMALL CAPITAL H]
-"\u029C" => "H"
-
-# Ḣ  [LATIN CAPITAL LETTER H WITH DOT ABOVE]
-"\u1E22" => "H"
-
-# Ḥ  [LATIN CAPITAL LETTER H WITH DOT BELOW]
-"\u1E24" => "H"
-
-# Ḧ  [LATIN CAPITAL LETTER H WITH DIAERESIS]
-"\u1E26" => "H"
-
-# Ḩ  [LATIN CAPITAL LETTER H WITH CEDILLA]
-"\u1E28" => "H"
-
-# Ḫ  [LATIN CAPITAL LETTER H WITH BREVE BELOW]
-"\u1E2A" => "H"
-
-# Ⓗ  [CIRCLED LATIN CAPITAL LETTER H]
-"\u24BD" => "H"
-
-# Ⱨ  [LATIN CAPITAL LETTER H WITH DESCENDER]
-"\u2C67" => "H"
-
-# Ⱶ  [LATIN CAPITAL LETTER HALF H]
-"\u2C75" => "H"
-
-# Ｈ  [FULLWIDTH LATIN CAPITAL LETTER H]
-"\uFF28" => "H"
-
-# ĥ  [LATIN SMALL LETTER H WITH CIRCUMFLEX]
-"\u0125" => "h"
-
-# ħ  [LATIN SMALL LETTER H WITH STROKE]
-"\u0127" => "h"
-
-# ȟ  [LATIN SMALL LETTER H WITH CARON]
-"\u021F" => "h"
-
-# ɥ  [LATIN SMALL LETTER TURNED H]
-"\u0265" => "h"
-
-# ɦ  [LATIN SMALL LETTER H WITH HOOK]
-"\u0266" => "h"
-
-# ʮ  [LATIN SMALL LETTER TURNED H WITH FISHHOOK]
-"\u02AE" => "h"
-
-# ʯ  [LATIN SMALL LETTER TURNED H WITH FISHHOOK AND TAIL]
-"\u02AF" => "h"
-
-# ḣ  [LATIN SMALL LETTER H WITH DOT ABOVE]
-"\u1E23" => "h"
-
-# ḥ  [LATIN SMALL LETTER H WITH DOT BELOW]
-"\u1E25" => "h"
-
-# ḧ  [LATIN SMALL LETTER H WITH DIAERESIS]
-"\u1E27" => "h"
-
-# ḩ  [LATIN SMALL LETTER H WITH CEDILLA]
-"\u1E29" => "h"
-
-# ḫ  [LATIN SMALL LETTER H WITH BREVE BELOW]
-"\u1E2B" => "h"
-
-# ẖ  [LATIN SMALL LETTER H WITH LINE BELOW]
-"\u1E96" => "h"
-
-# ⓗ  [CIRCLED LATIN SMALL LETTER H]
-"\u24D7" => "h"
-
-# ⱨ  [LATIN SMALL LETTER H WITH DESCENDER]
-"\u2C68" => "h"
-
-# ⱶ  [LATIN SMALL LETTER HALF H]
-"\u2C76" => "h"
-
-# ｈ  [FULLWIDTH LATIN SMALL LETTER H]
-"\uFF48" => "h"
-
-# Ƕ  http://en.wikipedia.org/wiki/Hwair  [LATIN CAPITAL LETTER HWAIR]
-"\u01F6" => "HV"
-
-# ⒣  [PARENTHESIZED LATIN SMALL LETTER H]
-"\u24A3" => "(h)"
-
-# ƕ  [LATIN SMALL LETTER HV]
-"\u0195" => "hv"
-
-# Ì  [LATIN CAPITAL LETTER I WITH GRAVE]
-"\u00CC" => "I"
-
-# Í  [LATIN CAPITAL LETTER I WITH ACUTE]
-"\u00CD" => "I"
-
-# Î  [LATIN CAPITAL LETTER I WITH CIRCUMFLEX]
-"\u00CE" => "I"
-
-# Ï  [LATIN CAPITAL LETTER I WITH DIAERESIS]
-"\u00CF" => "I"
-
-# Ĩ  [LATIN CAPITAL LETTER I WITH TILDE]
-"\u0128" => "I"
-
-# Ī  [LATIN CAPITAL LETTER I WITH MACRON]
-"\u012A" => "I"
-
-# Ĭ  [LATIN CAPITAL LETTER I WITH BREVE]
-"\u012C" => "I"
-
-# Į  [LATIN CAPITAL LETTER I WITH OGONEK]
-"\u012E" => "I"
-
-# İ  [LATIN CAPITAL LETTER I WITH DOT ABOVE]
-"\u0130" => "I"
-
-# Ɩ  [LATIN CAPITAL LETTER IOTA]
-"\u0196" => "I"
-
-# Ɨ  [LATIN CAPITAL LETTER I WITH STROKE]
-"\u0197" => "I"
-
-# Ǐ  [LATIN CAPITAL LETTER I WITH CARON]
-"\u01CF" => "I"
-
-# Ȉ  [LATIN CAPITAL LETTER I WITH DOUBLE GRAVE]
-"\u0208" => "I"
-
-# Ȋ  [LATIN CAPITAL LETTER I WITH INVERTED BREVE]
-"\u020A" => "I"
-
-# ɪ  [LATIN LETTER SMALL CAPITAL I]
-"\u026A" => "I"
-
-# ᵻ  [LATIN SMALL CAPITAL LETTER I WITH STROKE]
-"\u1D7B" => "I"
-
-# Ḭ  [LATIN CAPITAL LETTER I WITH TILDE BELOW]
-"\u1E2C" => "I"
-
-# Ḯ  [LATIN CAPITAL LETTER I WITH DIAERESIS AND ACUTE]
-"\u1E2E" => "I"
-
-# Ỉ  [LATIN CAPITAL LETTER I WITH HOOK ABOVE]
-"\u1EC8" => "I"
-
-# Ị  [LATIN CAPITAL LETTER I WITH DOT BELOW]
-"\u1ECA" => "I"
-
-# Ⓘ  [CIRCLED LATIN CAPITAL LETTER I]
-"\u24BE" => "I"
-
-# ꟾ  [LATIN EPIGRAPHIC LETTER I LONGA]
-"\uA7FE" => "I"
-
-# Ｉ  [FULLWIDTH LATIN CAPITAL LETTER I]
-"\uFF29" => "I"
-
-# ì  [LATIN SMALL LETTER I WITH GRAVE]
-"\u00EC" => "i"
-
-# í  [LATIN SMALL LETTER I WITH ACUTE]
-"\u00ED" => "i"
-
-# î  [LATIN SMALL LETTER I WITH CIRCUMFLEX]
-"\u00EE" => "i"
-
-# ï  [LATIN SMALL LETTER I WITH DIAERESIS]
-"\u00EF" => "i"
-
-# ĩ  [LATIN SMALL LETTER I WITH TILDE]
-"\u0129" => "i"
-
-# ī  [LATIN SMALL LETTER I WITH MACRON]
-"\u012B" => "i"
-
-# ĭ  [LATIN SMALL LETTER I WITH BREVE]
-"\u012D" => "i"
-
-# į  [LATIN SMALL LETTER I WITH OGONEK]
-"\u012F" => "i"
-
-# ı  [LATIN SMALL LETTER DOTLESS I]
-"\u0131" => "i"
-
-# ǐ  [LATIN SMALL LETTER I WITH CARON]
-"\u01D0" => "i"
-
-# ȉ  [LATIN SMALL LETTER I WITH DOUBLE GRAVE]
-"\u0209" => "i"
-
-# ȋ  [LATIN SMALL LETTER I WITH INVERTED BREVE]
-"\u020B" => "i"
-
-# ɨ  [LATIN SMALL LETTER I WITH STROKE]
-"\u0268" => "i"
-
-# ᴉ  [LATIN SMALL LETTER TURNED I]
-"\u1D09" => "i"
-
-# ᵢ  [LATIN SUBSCRIPT SMALL LETTER I]
-"\u1D62" => "i"
-
-# ᵼ  [LATIN SMALL LETTER IOTA WITH STROKE]
-"\u1D7C" => "i"
-
-# ᶖ  [LATIN SMALL LETTER I WITH RETROFLEX HOOK]
-"\u1D96" => "i"
-
-# ḭ  [LATIN SMALL LETTER I WITH TILDE BELOW]
-"\u1E2D" => "i"
-
-# ḯ  [LATIN SMALL LETTER I WITH DIAERESIS AND ACUTE]
-"\u1E2F" => "i"
-
-# ỉ  [LATIN SMALL LETTER I WITH HOOK ABOVE]
-"\u1EC9" => "i"
-
-# ị  [LATIN SMALL LETTER I WITH DOT BELOW]
-"\u1ECB" => "i"
-
-# ⁱ  [SUPERSCRIPT LATIN SMALL LETTER I]
-"\u2071" => "i"
-
-# ⓘ  [CIRCLED LATIN SMALL LETTER I]
-"\u24D8" => "i"
-
-# ｉ  [FULLWIDTH LATIN SMALL LETTER I]
-"\uFF49" => "i"
-
-# IJ  [LATIN CAPITAL LIGATURE IJ]
-"\u0132" => "IJ"
-
-# ⒤  [PARENTHESIZED LATIN SMALL LETTER I]
-"\u24A4" => "(i)"
-
-# ij  [LATIN SMALL LIGATURE IJ]
-"\u0133" => "ij"
-
-# Ĵ  [LATIN CAPITAL LETTER J WITH CIRCUMFLEX]
-"\u0134" => "J"
-
-# Ɉ  [LATIN CAPITAL LETTER J WITH STROKE]
-"\u0248" => "J"
-
-# ᴊ  [LATIN LETTER SMALL CAPITAL J]
-"\u1D0A" => "J"
-
-# Ⓙ  [CIRCLED LATIN CAPITAL LETTER J]
-"\u24BF" => "J"
-
-# Ｊ  [FULLWIDTH LATIN CAPITAL LETTER J]
-"\uFF2A" => "J"
-
-# ĵ  [LATIN SMALL LETTER J WITH CIRCUMFLEX]
-"\u0135" => "j"
-
-# ǰ  [LATIN SMALL LETTER J WITH CARON]
-"\u01F0" => "j"
-
-# ȷ  [LATIN SMALL LETTER DOTLESS J]
-"\u0237" => "j"
-
-# ɉ  [LATIN SMALL LETTER J WITH STROKE]
-"\u0249" => "j"
-
-# ɟ  [LATIN SMALL LETTER DOTLESS J WITH STROKE]
-"\u025F" => "j"
-
-# ʄ  [LATIN SMALL LETTER DOTLESS J WITH STROKE AND HOOK]
-"\u0284" => "j"
-
-# ʝ  [LATIN SMALL LETTER J WITH CROSSED-TAIL]
-"\u029D" => "j"
-
-# ⓙ  [CIRCLED LATIN SMALL LETTER J]
-"\u24D9" => "j"
-
-# ⱼ  [LATIN SUBSCRIPT SMALL LETTER J]
-"\u2C7C" => "j"
-
-# ｊ  [FULLWIDTH LATIN SMALL LETTER J]
-"\uFF4A" => "j"
-
-# ⒥  [PARENTHESIZED LATIN SMALL LETTER J]
-"\u24A5" => "(j)"
-
-# Ķ  [LATIN CAPITAL LETTER K WITH CEDILLA]
-"\u0136" => "K"
-
-# Ƙ  [LATIN CAPITAL LETTER K WITH HOOK]
-"\u0198" => "K"
-
-# Ǩ  [LATIN CAPITAL LETTER K WITH CARON]
-"\u01E8" => "K"
-
-# ᴋ  [LATIN LETTER SMALL CAPITAL K]
-"\u1D0B" => "K"
-
-# Ḱ  [LATIN CAPITAL LETTER K WITH ACUTE]
-"\u1E30" => "K"
-
-# Ḳ  [LATIN CAPITAL LETTER K WITH DOT BELOW]
-"\u1E32" => "K"
-
-# Ḵ  [LATIN CAPITAL LETTER K WITH LINE BELOW]
-"\u1E34" => "K"
-
-# Ⓚ  [CIRCLED LATIN CAPITAL LETTER K]
-"\u24C0" => "K"
-
-# Ⱪ  [LATIN CAPITAL LETTER K WITH DESCENDER]
-"\u2C69" => "K"
-
-# Ꝁ  [LATIN CAPITAL LETTER K WITH STROKE]
-"\uA740" => "K"
-
-# Ꝃ  [LATIN CAPITAL LETTER K WITH DIAGONAL STROKE]
-"\uA742" => "K"
-
-# Ꝅ  [LATIN CAPITAL LETTER K WITH STROKE AND DIAGONAL STROKE]
-"\uA744" => "K"
-
-# Ｋ  [FULLWIDTH LATIN CAPITAL LETTER K]
-"\uFF2B" => "K"
-
-# ķ  [LATIN SMALL LETTER K WITH CEDILLA]
-"\u0137" => "k"
-
-# ƙ  [LATIN SMALL LETTER K WITH HOOK]
-"\u0199" => "k"
-
-# ǩ  [LATIN SMALL LETTER K WITH CARON]
-"\u01E9" => "k"
-
-# ʞ  [LATIN SMALL LETTER TURNED K]
-"\u029E" => "k"
-
-# ᶄ  [LATIN SMALL LETTER K WITH PALATAL HOOK]
-"\u1D84" => "k"
-
-# ḱ  [LATIN SMALL LETTER K WITH ACUTE]
-"\u1E31" => "k"
-
-# ḳ  [LATIN SMALL LETTER K WITH DOT BELOW]
-"\u1E33" => "k"
-
-# ḵ  [LATIN SMALL LETTER K WITH LINE BELOW]
-"\u1E35" => "k"
-
-# ⓚ  [CIRCLED LATIN SMALL LETTER K]
-"\u24DA" => "k"
-
-# ⱪ  [LATIN SMALL LETTER K WITH DESCENDER]
-"\u2C6A" => "k"
-
-# ꝁ  [LATIN SMALL LETTER K WITH STROKE]
-"\uA741" => "k"
-
-# ꝃ  [LATIN SMALL LETTER K WITH DIAGONAL STROKE]
-"\uA743" => "k"
-
-# ꝅ  [LATIN SMALL LETTER K WITH STROKE AND DIAGONAL STROKE]
-"\uA745" => "k"
-
-# ｋ  [FULLWIDTH LATIN SMALL LETTER K]
-"\uFF4B" => "k"
-
-# ⒦  [PARENTHESIZED LATIN SMALL LETTER K]
-"\u24A6" => "(k)"
-
-# Ĺ  [LATIN CAPITAL LETTER L WITH ACUTE]
-"\u0139" => "L"
-
-# Ļ  [LATIN CAPITAL LETTER L WITH CEDILLA]
-"\u013B" => "L"
-
-# Ľ  [LATIN CAPITAL LETTER L WITH CARON]
-"\u013D" => "L"
-
-# Ŀ  [LATIN CAPITAL LETTER L WITH MIDDLE DOT]
-"\u013F" => "L"
-
-# Ł  [LATIN CAPITAL LETTER L WITH STROKE]
-"\u0141" => "L"
-
-# Ƚ  [LATIN CAPITAL LETTER L WITH BAR]
-"\u023D" => "L"
-
-# ʟ  [LATIN LETTER SMALL CAPITAL L]
-"\u029F" => "L"
-
-# ᴌ  [LATIN LETTER SMALL CAPITAL L WITH STROKE]
-"\u1D0C" => "L"
-
-# Ḷ  [LATIN CAPITAL LETTER L WITH DOT BELOW]
-"\u1E36" => "L"
-
-# Ḹ  [LATIN CAPITAL LETTER L WITH DOT BELOW AND MACRON]
-"\u1E38" => "L"
-
-# Ḻ  [LATIN CAPITAL LETTER L WITH LINE BELOW]
-"\u1E3A" => "L"
-
-# Ḽ  [LATIN CAPITAL LETTER L WITH CIRCUMFLEX BELOW]
-"\u1E3C" => "L"
-
-# Ⓛ  [CIRCLED LATIN CAPITAL LETTER L]
-"\u24C1" => "L"
-
-# Ⱡ  [LATIN CAPITAL LETTER L WITH DOUBLE BAR]
-"\u2C60" => "L"
-
-# Ɫ  [LATIN CAPITAL LETTER L WITH MIDDLE TILDE]
-"\u2C62" => "L"
-
-# Ꝇ  [LATIN CAPITAL LETTER BROKEN L]
-"\uA746" => "L"
-
-# Ꝉ  [LATIN CAPITAL LETTER L WITH HIGH STROKE]
-"\uA748" => "L"
-
-# Ꞁ  [LATIN CAPITAL LETTER TURNED L]
-"\uA780" => "L"
-
-# Ｌ  [FULLWIDTH LATIN CAPITAL LETTER L]
-"\uFF2C" => "L"
-
-# ĺ  [LATIN SMALL LETTER L WITH ACUTE]
-"\u013A" => "l"
-
-# ļ  [LATIN SMALL LETTER L WITH CEDILLA]
-"\u013C" => "l"
-
-# ľ  [LATIN SMALL LETTER L WITH CARON]
-"\u013E" => "l"
-
-# ŀ  [LATIN SMALL LETTER L WITH MIDDLE DOT]
-"\u0140" => "l"
-
-# ł  [LATIN SMALL LETTER L WITH STROKE]
-"\u0142" => "l"
-
-# ƚ  [LATIN SMALL LETTER L WITH BAR]
-"\u019A" => "l"
-
-# ȴ  [LATIN SMALL LETTER L WITH CURL]
-"\u0234" => "l"
-
-# ɫ  [LATIN SMALL LETTER L WITH MIDDLE TILDE]
-"\u026B" => "l"
-
-# ɬ  [LATIN SMALL LETTER L WITH BELT]
-"\u026C" => "l"
-
-# ɭ  [LATIN SMALL LETTER L WITH RETROFLEX HOOK]
-"\u026D" => "l"
-
-# ᶅ  [LATIN SMALL LETTER L WITH PALATAL HOOK]
-"\u1D85" => "l"
-
-# ḷ  [LATIN SMALL LETTER L WITH DOT BELOW]
-"\u1E37" => "l"
-
-# ḹ  [LATIN SMALL LETTER L WITH DOT BELOW AND MACRON]
-"\u1E39" => "l"
-
-# ḻ  [LATIN SMALL LETTER L WITH LINE BELOW]
-"\u1E3B" => "l"
-
-# ḽ  [LATIN SMALL LETTER L WITH CIRCUMFLEX BELOW]
-"\u1E3D" => "l"
-
-# ⓛ  [CIRCLED LATIN SMALL LETTER L]
-"\u24DB" => "l"
-
-# ⱡ  [LATIN SMALL LETTER L WITH DOUBLE BAR]
-"\u2C61" => "l"
-
-# ꝇ  [LATIN SMALL LETTER BROKEN L]
-"\uA747" => "l"
-
-# ꝉ  [LATIN SMALL LETTER L WITH HIGH STROKE]
-"\uA749" => "l"
-
-# ꞁ  [LATIN SMALL LETTER TURNED L]
-"\uA781" => "l"
-
-# ｌ  [FULLWIDTH LATIN SMALL LETTER L]
-"\uFF4C" => "l"
-
-# LJ  [LATIN CAPITAL LETTER LJ]
-"\u01C7" => "LJ"
-
-# Ỻ  [LATIN CAPITAL LETTER MIDDLE-WELSH LL]
-"\u1EFA" => "LL"
-
-# Lj  [LATIN CAPITAL LETTER L WITH SMALL LETTER J]
-"\u01C8" => "Lj"
-
-# ⒧  [PARENTHESIZED LATIN SMALL LETTER L]
-"\u24A7" => "(l)"
-
-# lj  [LATIN SMALL LETTER LJ]
-"\u01C9" => "lj"
-
-# ỻ  [LATIN SMALL LETTER MIDDLE-WELSH LL]
-"\u1EFB" => "ll"
-
-# ʪ  [LATIN SMALL LETTER LS DIGRAPH]
-"\u02AA" => "ls"
-
-# ʫ  [LATIN SMALL LETTER LZ DIGRAPH]
-"\u02AB" => "lz"
-
-# Ɯ  [LATIN CAPITAL LETTER TURNED M]
-"\u019C" => "M"
-
-# ᴍ  [LATIN LETTER SMALL CAPITAL M]
-"\u1D0D" => "M"
-
-# Ḿ  [LATIN CAPITAL LETTER M WITH ACUTE]
-"\u1E3E" => "M"
-
-# Ṁ  [LATIN CAPITAL LETTER M WITH DOT ABOVE]
-"\u1E40" => "M"
-
-# Ṃ  [LATIN CAPITAL LETTER M WITH DOT BELOW]
-"\u1E42" => "M"
-
-# Ⓜ  [CIRCLED LATIN CAPITAL LETTER M]
-"\u24C2" => "M"
-
-# Ɱ  [LATIN CAPITAL LETTER M WITH HOOK]
-"\u2C6E" => "M"
-
-# ꟽ  [LATIN EPIGRAPHIC LETTER INVERTED M]
-"\uA7FD" => "M"
-
-# ꟿ  [LATIN EPIGRAPHIC LETTER ARCHAIC M]
-"\uA7FF" => "M"
-
-# Ｍ  [FULLWIDTH LATIN CAPITAL LETTER M]
-"\uFF2D" => "M"
-
-# ɯ  [LATIN SMALL LETTER TURNED M]
-"\u026F" => "m"
-
-# ɰ  [LATIN SMALL LETTER TURNED M WITH LONG LEG]
-"\u0270" => "m"
-
-# ɱ  [LATIN SMALL LETTER M WITH HOOK]
-"\u0271" => "m"
-
-# ᵯ  [LATIN SMALL LETTER M WITH MIDDLE TILDE]
-"\u1D6F" => "m"
-
-# ᶆ  [LATIN SMALL LETTER M WITH PALATAL HOOK]
-"\u1D86" => "m"
-
-# ḿ  [LATIN SMALL LETTER M WITH ACUTE]
-"\u1E3F" => "m"
-
-# ṁ  [LATIN SMALL LETTER M WITH DOT ABOVE]
-"\u1E41" => "m"
-
-# ṃ  [LATIN SMALL LETTER M WITH DOT BELOW]
-"\u1E43" => "m"
-
-# ⓜ  [CIRCLED LATIN SMALL LETTER M]
-"\u24DC" => "m"
-
-# ｍ  [FULLWIDTH LATIN SMALL LETTER M]
-"\uFF4D" => "m"
-
-# ⒨  [PARENTHESIZED LATIN SMALL LETTER M]
-"\u24A8" => "(m)"
-
-# Ñ  [LATIN CAPITAL LETTER N WITH TILDE]
-"\u00D1" => "N"
-
-# Ń  [LATIN CAPITAL LETTER N WITH ACUTE]
-"\u0143" => "N"
-
-# Ņ  [LATIN CAPITAL LETTER N WITH CEDILLA]
-"\u0145" => "N"
-
-# Ň  [LATIN CAPITAL LETTER N WITH CARON]
-"\u0147" => "N"
-
-# Ŋ  http://en.wikipedia.org/wiki/Eng_(letter)  [LATIN CAPITAL LETTER ENG]
-"\u014A" => "N"
-
-# Ɲ  [LATIN CAPITAL LETTER N WITH LEFT HOOK]
-"\u019D" => "N"
-
-# Ǹ  [LATIN CAPITAL LETTER N WITH GRAVE]
-"\u01F8" => "N"
-
-# Ƞ  [LATIN CAPITAL LETTER N WITH LONG RIGHT LEG]
-"\u0220" => "N"
-
-# ɴ  [LATIN LETTER SMALL CAPITAL N]
-"\u0274" => "N"
-
-# ᴎ  [LATIN LETTER SMALL CAPITAL REVERSED N]
-"\u1D0E" => "N"
-
-# Ṅ  [LATIN CAPITAL LETTER N WITH DOT ABOVE]
-"\u1E44" => "N"
-
-# Ṇ  [LATIN CAPITAL LETTER N WITH DOT BELOW]
-"\u1E46" => "N"
-
-# Ṉ  [LATIN CAPITAL LETTER N WITH LINE BELOW]
-"\u1E48" => "N"
-
-# Ṋ  [LATIN CAPITAL LETTER N WITH CIRCUMFLEX BELOW]
-"\u1E4A" => "N"
-
-# Ⓝ  [CIRCLED LATIN CAPITAL LETTER N]
-"\u24C3" => "N"
-
-# Ｎ  [FULLWIDTH LATIN CAPITAL LETTER N]
-"\uFF2E" => "N"
-
-# ñ  [LATIN SMALL LETTER N WITH TILDE]
-"\u00F1" => "n"
-
-# ń  [LATIN SMALL LETTER N WITH ACUTE]
-"\u0144" => "n"
-
-# ņ  [LATIN SMALL LETTER N WITH CEDILLA]
-"\u0146" => "n"
-
-# ň  [LATIN SMALL LETTER N WITH CARON]
-"\u0148" => "n"
-
-# ʼn  [LATIN SMALL LETTER N PRECEDED BY APOSTROPHE]
-"\u0149" => "n"
-
-# ŋ  http://en.wikipedia.org/wiki/Eng_(letter)  [LATIN SMALL LETTER ENG]
-"\u014B" => "n"
-
-# ƞ  [LATIN SMALL LETTER N WITH LONG RIGHT LEG]
-"\u019E" => "n"
-
-# ǹ  [LATIN SMALL LETTER N WITH GRAVE]
-"\u01F9" => "n"
-
-# ȵ  [LATIN SMALL LETTER N WITH CURL]
-"\u0235" => "n"
-
-# ɲ  [LATIN SMALL LETTER N WITH LEFT HOOK]
-"\u0272" => "n"
-
-# ɳ  [LATIN SMALL LETTER N WITH RETROFLEX HOOK]
-"\u0273" => "n"
-
-# ᵰ  [LATIN SMALL LETTER N WITH MIDDLE TILDE]
-"\u1D70" => "n"
-
-# ᶇ  [LATIN SMALL LETTER N WITH PALATAL HOOK]
-"\u1D87" => "n"
-
-# ṅ  [LATIN SMALL LETTER N WITH DOT ABOVE]
-"\u1E45" => "n"
-
-# ṇ  [LATIN SMALL LETTER N WITH DOT BELOW]
-"\u1E47" => "n"
-
-# ṉ  [LATIN SMALL LETTER N WITH LINE BELOW]
-"\u1E49" => "n"
-
-# ṋ  [LATIN SMALL LETTER N WITH CIRCUMFLEX BELOW]
-"\u1E4B" => "n"
-
-# ⁿ  [SUPERSCRIPT LATIN SMALL LETTER N]
-"\u207F" => "n"
-
-# ⓝ  [CIRCLED LATIN SMALL LETTER N]
-"\u24DD" => "n"
-
-# ｎ  [FULLWIDTH LATIN SMALL LETTER N]
-"\uFF4E" => "n"
-
-# NJ  [LATIN CAPITAL LETTER NJ]
-"\u01CA" => "NJ"
-
-# Nj  [LATIN CAPITAL LETTER N WITH SMALL LETTER J]
-"\u01CB" => "Nj"
-
-# ⒩  [PARENTHESIZED LATIN SMALL LETTER N]
-"\u24A9" => "(n)"
-
-# nj  [LATIN SMALL LETTER NJ]
-"\u01CC" => "nj"
-
-# Ò  [LATIN CAPITAL LETTER O WITH GRAVE]
-"\u00D2" => "O"
-
-# Ó  [LATIN CAPITAL LETTER O WITH ACUTE]
-"\u00D3" => "O"
-
-# Ô  [LATIN CAPITAL LETTER O WITH CIRCUMFLEX]
-"\u00D4" => "O"
-
-# Õ  [LATIN CAPITAL LETTER O WITH TILDE]
-"\u00D5" => "O"
-
-# Ö  [LATIN CAPITAL LETTER O WITH DIAERESIS]
-"\u00D6" => "O"
-
-# Ø  [LATIN CAPITAL LETTER O WITH STROKE]
-"\u00D8" => "O"
-
-# Ō  [LATIN CAPITAL LETTER O WITH MACRON]
-"\u014C" => "O"
-
-# Ŏ  [LATIN CAPITAL LETTER O WITH BREVE]
-"\u014E" => "O"
-
-# Ő  [LATIN CAPITAL LETTER O WITH DOUBLE ACUTE]
-"\u0150" => "O"
-
-# Ɔ  [LATIN CAPITAL LETTER OPEN O]
-"\u0186" => "O"
-
-# Ɵ  [LATIN CAPITAL LETTER O WITH MIDDLE TILDE]
-"\u019F" => "O"
-
-# Ơ  [LATIN CAPITAL LETTER O WITH HORN]
-"\u01A0" => "O"
-
-# Ǒ  [LATIN CAPITAL LETTER O WITH CARON]
-"\u01D1" => "O"
-
-# Ǫ  [LATIN CAPITAL LETTER O WITH OGONEK]
-"\u01EA" => "O"
-
-# Ǭ  [LATIN CAPITAL LETTER O WITH OGONEK AND MACRON]
-"\u01EC" => "O"
-
-# Ǿ  [LATIN CAPITAL LETTER O WITH STROKE AND ACUTE]
-"\u01FE" => "O"
-
-# Ȍ  [LATIN CAPITAL LETTER O WITH DOUBLE GRAVE]
-"\u020C" => "O"
-
-# Ȏ  [LATIN CAPITAL LETTER O WITH INVERTED BREVE]
-"\u020E" => "O"
-
-# Ȫ  [LATIN CAPITAL LETTER O WITH DIAERESIS AND MACRON]
-"\u022A" => "O"
-
-# Ȭ  [LATIN CAPITAL LETTER O WITH TILDE AND MACRON]
-"\u022C" => "O"
-
-# Ȯ  [LATIN CAPITAL LETTER O WITH DOT ABOVE]
-"\u022E" => "O"
-
-# Ȱ  [LATIN CAPITAL LETTER O WITH DOT ABOVE AND MACRON]
-"\u0230" => "O"
-
-# ᴏ  [LATIN LETTER SMALL CAPITAL O]
-"\u1D0F" => "O"
-
-# ᴐ  [LATIN LETTER SMALL CAPITAL OPEN O]
-"\u1D10" => "O"
-
-# Ṍ  [LATIN CAPITAL LETTER O WITH TILDE AND ACUTE]
-"\u1E4C" => "O"
-
-# Ṏ  [LATIN CAPITAL LETTER O WITH TILDE AND DIAERESIS]
-"\u1E4E" => "O"
-
-# Ṑ  [LATIN CAPITAL LETTER O WITH MACRON AND GRAVE]
-"\u1E50" => "O"
-
-# Ṓ  [LATIN CAPITAL LETTER O WITH MACRON AND ACUTE]
-"\u1E52" => "O"
-
-# Ọ  [LATIN CAPITAL LETTER O WITH DOT BELOW]
-"\u1ECC" => "O"
-
-# Ỏ  [LATIN CAPITAL LETTER O WITH HOOK ABOVE]
-"\u1ECE" => "O"
-
-# Ố  [LATIN CAPITAL LETTER O WITH CIRCUMFLEX AND ACUTE]
-"\u1ED0" => "O"
-
-# Ồ  [LATIN CAPITAL LETTER O WITH CIRCUMFLEX AND GRAVE]
-"\u1ED2" => "O"
-
-# Ổ  [LATIN CAPITAL LETTER O WITH CIRCUMFLEX AND HOOK ABOVE]
-"\u1ED4" => "O"
-
-# Ỗ  [LATIN CAPITAL LETTER O WITH CIRCUMFLEX AND TILDE]
-"\u1ED6" => "O"
-
-# Ộ  [LATIN CAPITAL LETTER O WITH CIRCUMFLEX AND DOT BELOW]
-"\u1ED8" => "O"
-
-# Ớ  [LATIN CAPITAL LETTER O WITH HORN AND ACUTE]
-"\u1EDA" => "O"
-
-# Ờ  [LATIN CAPITAL LETTER O WITH HORN AND GRAVE]
-"\u1EDC" => "O"
-
-# Ở  [LATIN CAPITAL LETTER O WITH HORN AND HOOK ABOVE]
-"\u1EDE" => "O"
-
-# Ỡ  [LATIN CAPITAL LETTER O WITH HORN AND TILDE]
-"\u1EE0" => "O"
-
-# Ợ  [LATIN CAPITAL LETTER O WITH HORN AND DOT BELOW]
-"\u1EE2" => "O"
-
-# Ⓞ  [CIRCLED LATIN CAPITAL LETTER O]
-"\u24C4" => "O"
-
-# Ꝋ  [LATIN CAPITAL LETTER O WITH LONG STROKE OVERLAY]
-"\uA74A" => "O"
-
-# Ꝍ  [LATIN CAPITAL LETTER O WITH LOOP]
-"\uA74C" => "O"
-
-# Ｏ  [FULLWIDTH LATIN CAPITAL LETTER O]
-"\uFF2F" => "O"
-
-# ò  [LATIN SMALL LETTER O WITH GRAVE]
-"\u00F2" => "o"
-
-# ó  [LATIN SMALL LETTER O WITH ACUTE]
-"\u00F3" => "o"
-
-# ô  [LATIN SMALL LETTER O WITH CIRCUMFLEX]
-"\u00F4" => "o"
-
-# õ  [LATIN SMALL LETTER O WITH TILDE]
-"\u00F5" => "o"
-
-# ö  [LATIN SMALL LETTER O WITH DIAERESIS]
-"\u00F6" => "o"
-
-# ø  [LATIN SMALL LETTER O WITH STROKE]
-"\u00F8" => "o"
-
-# ō  [LATIN SMALL LETTER O WITH MACRON]
-"\u014D" => "o"
-
-# ŏ  [LATIN SMALL LETTER O WITH BREVE]
-"\u014F" => "o"
-
-# ő  [LATIN SMALL LETTER O WITH DOUBLE ACUTE]
-"\u0151" => "o"
-
-# ơ  [LATIN SMALL LETTER O WITH HORN]
-"\u01A1" => "o"
-
-# ǒ  [LATIN SMALL LETTER O WITH CARON]
-"\u01D2" => "o"
-
-# ǫ  [LATIN SMALL LETTER O WITH OGONEK]
-"\u01EB" => "o"
-
-# ǭ  [LATIN SMALL LETTER O WITH OGONEK AND MACRON]
-"\u01ED" => "o"
-
-# ǿ  [LATIN SMALL LETTER O WITH STROKE AND ACUTE]
-"\u01FF" => "o"
-
-# ȍ  [LATIN SMALL LETTER O WITH DOUBLE GRAVE]
-"\u020D" => "o"
-
-# ȏ  [LATIN SMALL LETTER O WITH INVERTED BREVE]
-"\u020F" => "o"
-
-# ȫ  [LATIN SMALL LETTER O WITH DIAERESIS AND MACRON]
-"\u022B" => "o"
-
-# ȭ  [LATIN SMALL LETTER O WITH TILDE AND MACRON]
-"\u022D" => "o"
-
-# ȯ  [LATIN SMALL LETTER O WITH DOT ABOVE]
-"\u022F" => "o"
-
-# ȱ  [LATIN SMALL LETTER O WITH DOT ABOVE AND MACRON]
-"\u0231" => "o"
-
-# ɔ  [LATIN SMALL LETTER OPEN O]
-"\u0254" => "o"
-
-# ɵ  [LATIN SMALL LETTER BARRED O]
-"\u0275" => "o"
-
-# ᴖ  [LATIN SMALL LETTER TOP HALF O]
-"\u1D16" => "o"
-
-# ᴗ  [LATIN SMALL LETTER BOTTOM HALF O]
-"\u1D17" => "o"
-
-# ᶗ  [LATIN SMALL LETTER OPEN O WITH RETROFLEX HOOK]
-"\u1D97" => "o"
-
-# ṍ  [LATIN SMALL LETTER O WITH TILDE AND ACUTE]
-"\u1E4D" => "o"
-
-# ṏ  [LATIN SMALL LETTER O WITH TILDE AND DIAERESIS]
-"\u1E4F" => "o"
-
-# ṑ  [LATIN SMALL LETTER O WITH MACRON AND GRAVE]
-"\u1E51" => "o"
-
-# ṓ  [LATIN SMALL LETTER O WITH MACRON AND ACUTE]
-"\u1E53" => "o"
-
-# ọ  [LATIN SMALL LETTER O WITH DOT BELOW]
-"\u1ECD" => "o"
-
-# ỏ  [LATIN SMALL LETTER O WITH HOOK ABOVE]
-"\u1ECF" => "o"
-
-# ố  [LATIN SMALL LETTER O WITH CIRCUMFLEX AND ACUTE]
-"\u1ED1" => "o"
-
-# ồ  [LATIN SMALL LETTER O WITH CIRCUMFLEX AND GRAVE]
-"\u1ED3" => "o"
-
-# ổ  [LATIN SMALL LETTER O WITH CIRCUMFLEX AND HOOK ABOVE]
-"\u1ED5" => "o"
-
-# ỗ  [LATIN SMALL LETTER O WITH CIRCUMFLEX AND TILDE]
-"\u1ED7" => "o"
-
-# ộ  [LATIN SMALL LETTER O WITH CIRCUMFLEX AND DOT BELOW]
-"\u1ED9" => "o"
-
-# ớ  [LATIN SMALL LETTER O WITH HORN AND ACUTE]
-"\u1EDB" => "o"
-
-# ờ  [LATIN SMALL LETTER O WITH HORN AND GRAVE]
-"\u1EDD" => "o"
-
-# ở  [LATIN SMALL LETTER O WITH HORN AND HOOK ABOVE]
-"\u1EDF" => "o"
-
-# ỡ  [LATIN SMALL LETTER O WITH HORN AND TILDE]
-"\u1EE1" => "o"
-
-# ợ  [LATIN SMALL LETTER O WITH HORN AND DOT BELOW]
-"\u1EE3" => "o"
-
-# ₒ  [LATIN SUBSCRIPT SMALL LETTER O]
-"\u2092" => "o"
-
-# ⓞ  [CIRCLED LATIN SMALL LETTER O]
-"\u24DE" => "o"
-
-# ⱺ  [LATIN SMALL LETTER O WITH LOW RING INSIDE]
-"\u2C7A" => "o"
-
-# ꝋ  [LATIN SMALL LETTER O WITH LONG STROKE OVERLAY]
-"\uA74B" => "o"
-
-# ꝍ  [LATIN SMALL LETTER O WITH LOOP]
-"\uA74D" => "o"
-
-# ｏ  [FULLWIDTH LATIN SMALL LETTER O]
-"\uFF4F" => "o"
-
-# Π [LATIN CAPITAL LIGATURE OE]
-"\u0152" => "OE"
-
-# ɶ  [LATIN LETTER SMALL CAPITAL OE]
-"\u0276" => "OE"
-
-# Ꝏ  [LATIN CAPITAL LETTER OO]
-"\uA74E" => "OO"
-
-# Ȣ  http://en.wikipedia.org/wiki/OU  [LATIN CAPITAL LETTER OU]
-"\u0222" => "OU"
-
-# ᴕ  [LATIN LETTER SMALL CAPITAL OU]
-"\u1D15" => "OU"
-
-# ⒪  [PARENTHESIZED LATIN SMALL LETTER O]
-"\u24AA" => "(o)"
-
-# œ  [LATIN SMALL LIGATURE OE]
-"\u0153" => "oe"
-
-# ᴔ  [LATIN SMALL LETTER TURNED OE]
-"\u1D14" => "oe"
-
-# ꝏ  [LATIN SMALL LETTER OO]
-"\uA74F" => "oo"
-
-# ȣ  http://en.wikipedia.org/wiki/OU  [LATIN SMALL LETTER OU]
-"\u0223" => "ou"
-
-# Ƥ  [LATIN CAPITAL LETTER P WITH HOOK]
-"\u01A4" => "P"
-
-# ᴘ  [LATIN LETTER SMALL CAPITAL P]
-"\u1D18" => "P"
-
-# Ṕ  [LATIN CAPITAL LETTER P WITH ACUTE]
-"\u1E54" => "P"
-
-# Ṗ  [LATIN CAPITAL LETTER P WITH DOT ABOVE]
-"\u1E56" => "P"
-
-# Ⓟ  [CIRCLED LATIN CAPITAL LETTER P]
-"\u24C5" => "P"
-
-# Ᵽ  [LATIN CAPITAL LETTER P WITH STROKE]
-"\u2C63" => "P"
-
-# Ꝑ  [LATIN CAPITAL LETTER P WITH STROKE THROUGH DESCENDER]
-"\uA750" => "P"
-
-# Ꝓ  [LATIN CAPITAL LETTER P WITH FLOURISH]
-"\uA752" => "P"
-
-# Ꝕ  [LATIN CAPITAL LETTER P WITH SQUIRREL TAIL]
-"\uA754" => "P"
-
-# Ｐ  [FULLWIDTH LATIN CAPITAL LETTER P]
-"\uFF30" => "P"
-
-# ƥ  [LATIN SMALL LETTER P WITH HOOK]
-"\u01A5" => "p"
-
-# ᵱ  [LATIN SMALL LETTER P WITH MIDDLE TILDE]
-"\u1D71" => "p"
-
-# ᵽ  [LATIN SMALL LETTER P WITH STROKE]
-"\u1D7D" => "p"
-
-# ᶈ  [LATIN SMALL LETTER P WITH PALATAL HOOK]
-"\u1D88" => "p"
-
-# ṕ  [LATIN SMALL LETTER P WITH ACUTE]
-"\u1E55" => "p"
-
-# ṗ  [LATIN SMALL LETTER P WITH DOT ABOVE]
-"\u1E57" => "p"
-
-# ⓟ  [CIRCLED LATIN SMALL LETTER P]
-"\u24DF" => "p"
-
-# ꝑ  [LATIN SMALL LETTER P WITH STROKE THROUGH DESCENDER]
-"\uA751" => "p"
-
-# ꝓ  [LATIN SMALL LETTER P WITH FLOURISH]
-"\uA753" => "p"
-
-# ꝕ  [LATIN SMALL LETTER P WITH SQUIRREL TAIL]
-"\uA755" => "p"
-
-# ꟼ  [LATIN EPIGRAPHIC LETTER REVERSED P]
-"\uA7FC" => "p"
-
-# ｐ  [FULLWIDTH LATIN SMALL LETTER P]
-"\uFF50" => "p"
-
-# ⒫  [PARENTHESIZED LATIN SMALL LETTER P]
-"\u24AB" => "(p)"
-
-# Ɋ  [LATIN CAPITAL LETTER SMALL Q WITH HOOK TAIL]
-"\u024A" => "Q"
-
-# Ⓠ  [CIRCLED LATIN CAPITAL LETTER Q]
-"\u24C6" => "Q"
-
-# Ꝗ  [LATIN CAPITAL LETTER Q WITH STROKE THROUGH DESCENDER]
-"\uA756" => "Q"
-
-# Ꝙ  [LATIN CAPITAL LETTER Q WITH DIAGONAL STROKE]
-"\uA758" => "Q"
-
-# Ｑ  [FULLWIDTH LATIN CAPITAL LETTER Q]
-"\uFF31" => "Q"
-
-# ĸ  http://en.wikipedia.org/wiki/Kra_(letter)  [LATIN SMALL LETTER KRA]
-"\u0138" => "q"
-
-# ɋ  [LATIN SMALL LETTER Q WITH HOOK TAIL]
-"\u024B" => "q"
-
-# ʠ  [LATIN SMALL LETTER Q WITH HOOK]
-"\u02A0" => "q"
-
-# ⓠ  [CIRCLED LATIN SMALL LETTER Q]
-"\u24E0" => "q"
-
-# ꝗ  [LATIN SMALL LETTER Q WITH STROKE THROUGH DESCENDER]
-"\uA757" => "q"
-
-# ꝙ  [LATIN SMALL LETTER Q WITH DIAGONAL STROKE]
-"\uA759" => "q"
-
-# ｑ  [FULLWIDTH LATIN SMALL LETTER Q]
-"\uFF51" => "q"
-
-# ⒬  [PARENTHESIZED LATIN SMALL LETTER Q]
-"\u24AC" => "(q)"
-
-# ȹ  [LATIN SMALL LETTER QP DIGRAPH]
-"\u0239" => "qp"
-
-# Ŕ  [LATIN CAPITAL LETTER R WITH ACUTE]
-"\u0154" => "R"
-
-# Ŗ  [LATIN CAPITAL LETTER R WITH CEDILLA]
-"\u0156" => "R"
-
-# Ř  [LATIN CAPITAL LETTER R WITH CARON]
-"\u0158" => "R"
-
-# Ȓ  [LATIN CAPITAL LETTER R WITH DOUBLE GRAVE]
-"\u0210" => "R"
-
-# Ȓ  [LATIN CAPITAL LETTER R WITH INVERTED BREVE]
-"\u0212" => "R"
-
-# Ɍ  [LATIN CAPITAL LETTER R WITH STROKE]
-"\u024C" => "R"
-
-# ʀ  [LATIN LETTER SMALL CAPITAL R]
-"\u0280" => "R"
-
-# ʁ  [LATIN LETTER SMALL CAPITAL INVERTED R]
-"\u0281" => "R"
-
-# ᴙ  [LATIN LETTER SMALL CAPITAL REVERSED R]
-"\u1D19" => "R"
-
-# ᴚ  [LATIN LETTER SMALL CAPITAL TURNED R]
-"\u1D1A" => "R"
-
-# Ṙ  [LATIN CAPITAL LETTER R WITH DOT ABOVE]
-"\u1E58" => "R"
-
-# Ṛ  [LATIN CAPITAL LETTER R WITH DOT BELOW]
-"\u1E5A" => "R"
-
-# Ṝ  [LATIN CAPITAL LETTER R WITH DOT BELOW AND MACRON]
-"\u1E5C" => "R"
-
-# Ṟ  [LATIN CAPITAL LETTER R WITH LINE BELOW]
-"\u1E5E" => "R"
-
-# Ⓡ  [CIRCLED LATIN CAPITAL LETTER R]
-"\u24C7" => "R"
-
-# Ɽ  [LATIN CAPITAL LETTER R WITH TAIL]
-"\u2C64" => "R"
-
-# Ꝛ  [LATIN CAPITAL LETTER R ROTUNDA]
-"\uA75A" => "R"
-
-# Ꞃ  [LATIN CAPITAL LETTER INSULAR R]
-"\uA782" => "R"
-
-# Ｒ  [FULLWIDTH LATIN CAPITAL LETTER R]
-"\uFF32" => "R"
-
-# ŕ  [LATIN SMALL LETTER R WITH ACUTE]
-"\u0155" => "r"
-
-# ŗ  [LATIN SMALL LETTER R WITH CEDILLA]
-"\u0157" => "r"
-
-# ř  [LATIN SMALL LETTER R WITH CARON]
-"\u0159" => "r"
-
-# ȑ  [LATIN SMALL LETTER R WITH DOUBLE GRAVE]
-"\u0211" => "r"
-
-# ȓ  [LATIN SMALL LETTER R WITH INVERTED BREVE]
-"\u0213" => "r"
-
-# ɍ  [LATIN SMALL LETTER R WITH STROKE]
-"\u024D" => "r"
-
-# ɼ  [LATIN SMALL LETTER R WITH LONG LEG]
-"\u027C" => "r"
-
-# ɽ  [LATIN SMALL LETTER R WITH TAIL]
-"\u027D" => "r"
-
-# ɾ  [LATIN SMALL LETTER R WITH FISHHOOK]
-"\u027E" => "r"
-
-# ɿ  [LATIN SMALL LETTER REVERSED R WITH FISHHOOK]
-"\u027F" => "r"
-
-# ᵣ  [LATIN SUBSCRIPT SMALL LETTER R]
-"\u1D63" => "r"
-
-# ᵲ  [LATIN SMALL LETTER R WITH MIDDLE TILDE]
-"\u1D72" => "r"
-
-# ᵳ  [LATIN SMALL LETTER R WITH FISHHOOK AND MIDDLE TILDE]
-"\u1D73" => "r"
-
-# ᶉ  [LATIN SMALL LETTER R WITH PALATAL HOOK]
-"\u1D89" => "r"
-
-# ṙ  [LATIN SMALL LETTER R WITH DOT ABOVE]
-"\u1E59" => "r"
-
-# ṛ  [LATIN SMALL LETTER R WITH DOT BELOW]
-"\u1E5B" => "r"
-
-# ṝ  [LATIN SMALL LETTER R WITH DOT BELOW AND MACRON]
-"\u1E5D" => "r"
-
-# ṟ  [LATIN SMALL LETTER R WITH LINE BELOW]
-"\u1E5F" => "r"
-
-# ⓡ  [CIRCLED LATIN SMALL LETTER R]
-"\u24E1" => "r"
-
-# ꝛ  [LATIN SMALL LETTER R ROTUNDA]
-"\uA75B" => "r"
-
-# ꞃ  [LATIN SMALL LETTER INSULAR R]
-"\uA783" => "r"
-
-# ｒ  [FULLWIDTH LATIN SMALL LETTER R]
-"\uFF52" => "r"
-
-# ⒭  [PARENTHESIZED LATIN SMALL LETTER R]
-"\u24AD" => "(r)"
-
-# Ś  [LATIN CAPITAL LETTER S WITH ACUTE]
-"\u015A" => "S"
-
-# Ŝ  [LATIN CAPITAL LETTER S WITH CIRCUMFLEX]
-"\u015C" => "S"
-
-# Ş  [LATIN CAPITAL LETTER S WITH CEDILLA]
-"\u015E" => "S"
-
-# Š  [LATIN CAPITAL LETTER S WITH CARON]
-"\u0160" => "S"
-
-# Ș  [LATIN CAPITAL LETTER S WITH COMMA BELOW]
-"\u0218" => "S"
-
-# Ṡ  [LATIN CAPITAL LETTER S WITH DOT ABOVE]
-"\u1E60" => "S"
-
-# Ṣ  [LATIN CAPITAL LETTER S WITH DOT BELOW]
-"\u1E62" => "S"
-
-# Ṥ  [LATIN CAPITAL LETTER S WITH ACUTE AND DOT ABOVE]
-"\u1E64" => "S"
-
-# Ṧ  [LATIN CAPITAL LETTER S WITH CARON AND DOT ABOVE]
-"\u1E66" => "S"
-
-# Ṩ  [LATIN CAPITAL LETTER S WITH DOT BELOW AND DOT ABOVE]
-"\u1E68" => "S"
-
-# Ⓢ  [CIRCLED LATIN CAPITAL LETTER S]
-"\u24C8" => "S"
-
-# ꜱ  [LATIN LETTER SMALL CAPITAL S]
-"\uA731" => "S"
-
-# ꞅ  [LATIN SMALL LETTER INSULAR S]
-"\uA785" => "S"
-
-# Ｓ  [FULLWIDTH LATIN CAPITAL LETTER S]
-"\uFF33" => "S"
-
-# ś  [LATIN SMALL LETTER S WITH ACUTE]
-"\u015B" => "s"
-
-# ŝ  [LATIN SMALL LETTER S WITH CIRCUMFLEX]
-"\u015D" => "s"
-
-# ş  [LATIN SMALL LETTER S WITH CEDILLA]
-"\u015F" => "s"
-
-# š  [LATIN SMALL LETTER S WITH CARON]
-"\u0161" => "s"
-
-# ſ  http://en.wikipedia.org/wiki/Long_S  [LATIN SMALL LETTER LONG S]
-"\u017F" => "s"
-
-# ș  [LATIN SMALL LETTER S WITH COMMA BELOW]
-"\u0219" => "s"
-
-# ȿ  [LATIN SMALL LETTER S WITH SWASH TAIL]
-"\u023F" => "s"
-
-# ʂ  [LATIN SMALL LETTER S WITH HOOK]
-"\u0282" => "s"
-
-# ᵴ  [LATIN SMALL LETTER S WITH MIDDLE TILDE]
-"\u1D74" => "s"
-
-# ᶊ  [LATIN SMALL LETTER S WITH PALATAL HOOK]
-"\u1D8A" => "s"
-
-# ṡ  [LATIN SMALL LETTER S WITH DOT ABOVE]
-"\u1E61" => "s"
-
-# ṣ  [LATIN SMALL LETTER S WITH DOT BELOW]
-"\u1E63" => "s"
-
-# ṥ  [LATIN SMALL LETTER S WITH ACUTE AND DOT ABOVE]
-"\u1E65" => "s"
-
-# ṧ  [LATIN SMALL LETTER S WITH CARON AND DOT ABOVE]
-"\u1E67" => "s"
-
-# ṩ  [LATIN SMALL LETTER S WITH DOT BELOW AND DOT ABOVE]
-"\u1E69" => "s"
-
-# ẜ  [LATIN SMALL LETTER LONG S WITH DIAGONAL STROKE]
-"\u1E9C" => "s"
-
-# ẝ  [LATIN SMALL LETTER LONG S WITH HIGH STROKE]
-"\u1E9D" => "s"
-
-# ⓢ  [CIRCLED LATIN SMALL LETTER S]
-"\u24E2" => "s"
-
-# Ꞅ  [LATIN CAPITAL LETTER INSULAR S]
-"\uA784" => "s"
-
-# ｓ  [FULLWIDTH LATIN SMALL LETTER S]
-"\uFF53" => "s"
-
-# ẞ  [LATIN CAPITAL LETTER SHARP S]
-"\u1E9E" => "SS"
-
-# ⒮  [PARENTHESIZED LATIN SMALL LETTER S]
-"\u24AE" => "(s)"
-
-# ß  [LATIN SMALL LETTER SHARP S]
-"\u00DF" => "ss"
-
-# st  [LATIN SMALL LIGATURE ST]
-"\uFB06" => "st"
-
-# Ţ  [LATIN CAPITAL LETTER T WITH CEDILLA]
-"\u0162" => "T"
-
-# Ť  [LATIN CAPITAL LETTER T WITH CARON]
-"\u0164" => "T"
-
-# Ŧ  [LATIN CAPITAL LETTER T WITH STROKE]
-"\u0166" => "T"
-
-# Ƭ  [LATIN CAPITAL LETTER T WITH HOOK]
-"\u01AC" => "T"
-
-# Ʈ  [LATIN CAPITAL LETTER T WITH RETROFLEX HOOK]
-"\u01AE" => "T"
-
-# Ț  [LATIN CAPITAL LETTER T WITH COMMA BELOW]
-"\u021A" => "T"
-
-# Ⱦ  [LATIN CAPITAL LETTER T WITH DIAGONAL STROKE]
-"\u023E" => "T"
-
-# ᴛ  [LATIN LETTER SMALL CAPITAL T]
-"\u1D1B" => "T"
-
-# Ṫ  [LATIN CAPITAL LETTER T WITH DOT ABOVE]
-"\u1E6A" => "T"
-
-# Ṭ  [LATIN CAPITAL LETTER T WITH DOT BELOW]
-"\u1E6C" => "T"
-
-# Ṯ  [LATIN CAPITAL LETTER T WITH LINE BELOW]
-"\u1E6E" => "T"
-
-# Ṱ  [LATIN CAPITAL LETTER T WITH CIRCUMFLEX BELOW]
-"\u1E70" => "T"
-
-# Ⓣ  [CIRCLED LATIN CAPITAL LETTER T]
-"\u24C9" => "T"
-
-# Ꞇ  [LATIN CAPITAL LETTER INSULAR T]
-"\uA786" => "T"
-
-# Ｔ  [FULLWIDTH LATIN CAPITAL LETTER T]
-"\uFF34" => "T"
-
-# ţ  [LATIN SMALL LETTER T WITH CEDILLA]
-"\u0163" => "t"
-
-# ť  [LATIN SMALL LETTER T WITH CARON]
-"\u0165" => "t"
-
-# ŧ  [LATIN SMALL LETTER T WITH STROKE]
-"\u0167" => "t"
-
-# ƫ  [LATIN SMALL LETTER T WITH PALATAL HOOK]
-"\u01AB" => "t"
-
-# ƭ  [LATIN SMALL LETTER T WITH HOOK]
-"\u01AD" => "t"
-
-# ț  [LATIN SMALL LETTER T WITH COMMA BELOW]
-"\u021B" => "t"
-
-# ȶ  [LATIN SMALL LETTER T WITH CURL]
-"\u0236" => "t"
-
-# ʇ  [LATIN SMALL LETTER TURNED T]
-"\u0287" => "t"
-
-# ʈ  [LATIN SMALL LETTER T WITH RETROFLEX HOOK]
-"\u0288" => "t"
-
-# ᵵ  [LATIN SMALL LETTER T WITH MIDDLE TILDE]
-"\u1D75" => "t"
-
-# ṫ  [LATIN SMALL LETTER T WITH DOT ABOVE]
-"\u1E6B" => "t"
-
-# ṭ  [LATIN SMALL LETTER T WITH DOT BELOW]
-"\u1E6D" => "t"
-
-# ṯ  [LATIN SMALL LETTER T WITH LINE BELOW]
-"\u1E6F" => "t"
-
-# ṱ  [LATIN SMALL LETTER T WITH CIRCUMFLEX BELOW]
-"\u1E71" => "t"
-
-# ẗ  [LATIN SMALL LETTER T WITH DIAERESIS]
-"\u1E97" => "t"
-
-# ⓣ  [CIRCLED LATIN SMALL LETTER T]
-"\u24E3" => "t"
-
-# ⱦ  [LATIN SMALL LETTER T WITH DIAGONAL STROKE]
-"\u2C66" => "t"
-
-# ｔ  [FULLWIDTH LATIN SMALL LETTER T]
-"\uFF54" => "t"
-
-# Þ  [LATIN CAPITAL LETTER THORN]
-"\u00DE" => "TH"
-
-# Ꝧ  [LATIN CAPITAL LETTER THORN WITH STROKE THROUGH DESCENDER]
-"\uA766" => "TH"
-
-# Ꜩ  [LATIN CAPITAL LETTER TZ]
-"\uA728" => "TZ"
-
-# ⒯  [PARENTHESIZED LATIN SMALL LETTER T]
-"\u24AF" => "(t)"
-
-# ʨ  [LATIN SMALL LETTER TC DIGRAPH WITH CURL]
-"\u02A8" => "tc"
-
-# þ  [LATIN SMALL LETTER THORN]
-"\u00FE" => "th"
-
-# ᵺ  [LATIN SMALL LETTER TH WITH STRIKETHROUGH]
-"\u1D7A" => "th"
-
-# ꝧ  [LATIN SMALL LETTER THORN WITH STROKE THROUGH DESCENDER]
-"\uA767" => "th"
-
-# ʦ  [LATIN SMALL LETTER TS DIGRAPH]
-"\u02A6" => "ts"
-
-# ꜩ  [LATIN SMALL LETTER TZ]
-"\uA729" => "tz"
-
-# Ù  [LATIN CAPITAL LETTER U WITH GRAVE]
-"\u00D9" => "U"
-
-# Ú  [LATIN CAPITAL LETTER U WITH ACUTE]
-"\u00DA" => "U"
-
-# Û  [LATIN CAPITAL LETTER U WITH CIRCUMFLEX]
-"\u00DB" => "U"
-
-# Ü  [LATIN CAPITAL LETTER U WITH DIAERESIS]
-"\u00DC" => "U"
-
-# Ũ  [LATIN CAPITAL LETTER U WITH TILDE]
-"\u0168" => "U"
-
-# Ū  [LATIN CAPITAL LETTER U WITH MACRON]
-"\u016A" => "U"
-
-# Ŭ  [LATIN CAPITAL LETTER U WITH BREVE]
-"\u016C" => "U"
-
-# Ů  [LATIN CAPITAL LETTER U WITH RING ABOVE]
-"\u016E" => "U"
-
-# Ű  [LATIN CAPITAL LETTER U WITH DOUBLE ACUTE]
-"\u0170" => "U"
-
-# Ų  [LATIN CAPITAL LETTER U WITH OGONEK]
-"\u0172" => "U"
-
-# Ư  [LATIN CAPITAL LETTER U WITH HORN]
-"\u01AF" => "U"
-
-# Ǔ  [LATIN CAPITAL LETTER U WITH CARON]
-"\u01D3" => "U"
-
-# Ǖ  [LATIN CAPITAL LETTER U WITH DIAERESIS AND MACRON]
-"\u01D5" => "U"
-
-# Ǘ  [LATIN CAPITAL LETTER U WITH DIAERESIS AND ACUTE]
-"\u01D7" => "U"
-
-# Ǚ  [LATIN CAPITAL LETTER U WITH DIAERESIS AND CARON]
-"\u01D9" => "U"
-
-# Ǜ  [LATIN CAPITAL LETTER U WITH DIAERESIS AND GRAVE]
-"\u01DB" => "U"
-
-# Ȕ  [LATIN CAPITAL LETTER U WITH DOUBLE GRAVE]
-"\u0214" => "U"
-
-# Ȗ  [LATIN CAPITAL LETTER U WITH INVERTED BREVE]
-"\u0216" => "U"
-
-# Ʉ  [LATIN CAPITAL LETTER U BAR]
-"\u0244" => "U"
-
-# ᴜ  [LATIN LETTER SMALL CAPITAL U]
-"\u1D1C" => "U"
-
-# ᵾ  [LATIN SMALL CAPITAL LETTER U WITH STROKE]
-"\u1D7E" => "U"
-
-# Ṳ  [LATIN CAPITAL LETTER U WITH DIAERESIS BELOW]
-"\u1E72" => "U"
-
-# Ṵ  [LATIN CAPITAL LETTER U WITH TILDE BELOW]
-"\u1E74" => "U"
-
-# Ṷ  [LATIN CAPITAL LETTER U WITH CIRCUMFLEX BELOW]
-"\u1E76" => "U"
-
-# Ṹ  [LATIN CAPITAL LETTER U WITH TILDE AND ACUTE]
-"\u1E78" => "U"
-
-# Ṻ  [LATIN CAPITAL LETTER U WITH MACRON AND DIAERESIS]
-"\u1E7A" => "U"
-
-# Ụ  [LATIN CAPITAL LETTER U WITH DOT BELOW]
-"\u1EE4" => "U"
-
-# Ủ  [LATIN CAPITAL LETTER U WITH HOOK ABOVE]
-"\u1EE6" => "U"
-
-# Ứ  [LATIN CAPITAL LETTER U WITH HORN AND ACUTE]
-"\u1EE8" => "U"
-
-# Ừ  [LATIN CAPITAL LETTER U WITH HORN AND GRAVE]
-"\u1EEA" => "U"
-
-# Ử  [LATIN CAPITAL LETTER U WITH HORN AND HOOK ABOVE]
-"\u1EEC" => "U"
-
-# Ữ  [LATIN CAPITAL LETTER U WITH HORN AND TILDE]
-"\u1EEE" => "U"
-
-# Ự  [LATIN CAPITAL LETTER U WITH HORN AND DOT BELOW]
-"\u1EF0" => "U"
-
-# Ⓤ  [CIRCLED LATIN CAPITAL LETTER U]
-"\u24CA" => "U"
-
-# Ｕ  [FULLWIDTH LATIN CAPITAL LETTER U]
-"\uFF35" => "U"
-
-# ù  [LATIN SMALL LETTER U WITH GRAVE]
-"\u00F9" => "u"
-
-# ú  [LATIN SMALL LETTER U WITH ACUTE]
-"\u00FA" => "u"
-
-# û  [LATIN SMALL LETTER U WITH CIRCUMFLEX]
-"\u00FB" => "u"
-
-# ü  [LATIN SMALL LETTER U WITH DIAERESIS]
-"\u00FC" => "u"
-
-# ũ  [LATIN SMALL LETTER U WITH TILDE]
-"\u0169" => "u"
-
-# ū  [LATIN SMALL LETTER U WITH MACRON]
-"\u016B" => "u"
-
-# ŭ  [LATIN SMALL LETTER U WITH BREVE]
-"\u016D" => "u"
-
-# ů  [LATIN SMALL LETTER U WITH RING ABOVE]
-"\u016F" => "u"
-
-# ű  [LATIN SMALL LETTER U WITH DOUBLE ACUTE]
-"\u0171" => "u"
-
-# ų  [LATIN SMALL LETTER U WITH OGONEK]
-"\u0173" => "u"
-
-# ư  [LATIN SMALL LETTER U WITH HORN]
-"\u01B0" => "u"
-
-# ǔ  [LATIN SMALL LETTER U WITH CARON]
-"\u01D4" => "u"
-
-# ǖ  [LATIN SMALL LETTER U WITH DIAERESIS AND MACRON]
-"\u01D6" => "u"
-
-# ǘ  [LATIN SMALL LETTER U WITH DIAERESIS AND ACUTE]
-"\u01D8" => "u"
-
-# ǚ  [LATIN SMALL LETTER U WITH DIAERESIS AND CARON]
-"\u01DA" => "u"
-
-# ǜ  [LATIN SMALL LETTER U WITH DIAERESIS AND GRAVE]
-"\u01DC" => "u"
-
-# ȕ  [LATIN SMALL LETTER U WITH DOUBLE GRAVE]
-"\u0215" => "u"
-
-# ȗ  [LATIN SMALL LETTER U WITH INVERTED BREVE]
-"\u0217" => "u"
-
-# ʉ  [LATIN SMALL LETTER U BAR]
-"\u0289" => "u"
-
-# ᵤ  [LATIN SUBSCRIPT SMALL LETTER U]
-"\u1D64" => "u"
-
-# ᶙ  [LATIN SMALL LETTER U WITH RETROFLEX HOOK]
-"\u1D99" => "u"
-
-# ṳ  [LATIN SMALL LETTER U WITH DIAERESIS BELOW]
-"\u1E73" => "u"
-
-# ṵ  [LATIN SMALL LETTER U WITH TILDE BELOW]
-"\u1E75" => "u"
-
-# ṷ  [LATIN SMALL LETTER U WITH CIRCUMFLEX BELOW]
-"\u1E77" => "u"
-
-# ṹ  [LATIN SMALL LETTER U WITH TILDE AND ACUTE]
-"\u1E79" => "u"
-
-# ṻ  [LATIN SMALL LETTER U WITH MACRON AND DIAERESIS]
-"\u1E7B" => "u"
-
-# ụ  [LATIN SMALL LETTER U WITH DOT BELOW]
-"\u1EE5" => "u"
-
-# ủ  [LATIN SMALL LETTER U WITH HOOK ABOVE]
-"\u1EE7" => "u"
-
-# ứ  [LATIN SMALL LETTER U WITH HORN AND ACUTE]
-"\u1EE9" => "u"
-
-# ừ  [LATIN SMALL LETTER U WITH HORN AND GRAVE]
-"\u1EEB" => "u"
-
-# ử  [LATIN SMALL LETTER U WITH HORN AND HOOK ABOVE]
-"\u1EED" => "u"
-
-# ữ  [LATIN SMALL LETTER U WITH HORN AND TILDE]
-"\u1EEF" => "u"
-
-# ự  [LATIN SMALL LETTER U WITH HORN AND DOT BELOW]
-"\u1EF1" => "u"
-
-# ⓤ  [CIRCLED LATIN SMALL LETTER U]
-"\u24E4" => "u"
-
-# ｕ  [FULLWIDTH LATIN SMALL LETTER U]
-"\uFF55" => "u"
-
-# ⒰  [PARENTHESIZED LATIN SMALL LETTER U]
-"\u24B0" => "(u)"
-
-# ᵫ  [LATIN SMALL LETTER UE]
-"\u1D6B" => "ue"
-
-# Ʋ  [LATIN CAPITAL LETTER V WITH HOOK]
-"\u01B2" => "V"
-
-# Ʌ  [LATIN CAPITAL LETTER TURNED V]
-"\u0245" => "V"
-
-# ᴠ  [LATIN LETTER SMALL CAPITAL V]
-"\u1D20" => "V"
-
-# Ṽ  [LATIN CAPITAL LETTER V WITH TILDE]
-"\u1E7C" => "V"
-
-# Ṿ  [LATIN CAPITAL LETTER V WITH DOT BELOW]
-"\u1E7E" => "V"
-
-# Ỽ  [LATIN CAPITAL LETTER MIDDLE-WELSH V]
-"\u1EFC" => "V"
-
-# Ⓥ  [CIRCLED LATIN CAPITAL LETTER V]
-"\u24CB" => "V"
-
-# Ꝟ  [LATIN CAPITAL LETTER V WITH DIAGONAL STROKE]
-"\uA75E" => "V"
-
-# Ꝩ  [LATIN CAPITAL LETTER VEND]
-"\uA768" => "V"
-
-# Ｖ  [FULLWIDTH LATIN CAPITAL LETTER V]
-"\uFF36" => "V"
-
-# ʋ  [LATIN SMALL LETTER V WITH HOOK]
-"\u028B" => "v"
-
-# ʌ  [LATIN SMALL LETTER TURNED V]
-"\u028C" => "v"
-
-# ᵥ  [LATIN SUBSCRIPT SMALL LETTER V]
-"\u1D65" => "v"
-
-# ᶌ  [LATIN SMALL LETTER V WITH PALATAL HOOK]
-"\u1D8C" => "v"
-
-# ṽ  [LATIN SMALL LETTER V WITH TILDE]
-"\u1E7D" => "v"
-
-# ṿ  [LATIN SMALL LETTER V WITH DOT BELOW]
-"\u1E7F" => "v"
-
-# ⓥ  [CIRCLED LATIN SMALL LETTER V]
-"\u24E5" => "v"
-
-# ⱱ  [LATIN SMALL LETTER V WITH RIGHT HOOK]
-"\u2C71" => "v"
-
-# ⱴ  [LATIN SMALL LETTER V WITH CURL]
-"\u2C74" => "v"
-
-# ꝟ  [LATIN SMALL LETTER V WITH DIAGONAL STROKE]
-"\uA75F" => "v"
-
-# ｖ  [FULLWIDTH LATIN SMALL LETTER V]
-"\uFF56" => "v"
-
-# Ꝡ  [LATIN CAPITAL LETTER VY]
-"\uA760" => "VY"
-
-# ⒱  [PARENTHESIZED LATIN SMALL LETTER V]
-"\u24B1" => "(v)"
-
-# ꝡ  [LATIN SMALL LETTER VY]
-"\uA761" => "vy"
-
-# Ŵ  [LATIN CAPITAL LETTER W WITH CIRCUMFLEX]
-"\u0174" => "W"
-
-# Ƿ  http://en.wikipedia.org/wiki/Wynn  [LATIN CAPITAL LETTER WYNN]
-"\u01F7" => "W"
-
-# ᴡ  [LATIN LETTER SMALL CAPITAL W]
-"\u1D21" => "W"
-
-# Ẁ  [LATIN CAPITAL LETTER W WITH GRAVE]
-"\u1E80" => "W"
-
-# Ẃ  [LATIN CAPITAL LETTER W WITH ACUTE]
-"\u1E82" => "W"
-
-# Ẅ  [LATIN CAPITAL LETTER W WITH DIAERESIS]
-"\u1E84" => "W"
-
-# Ẇ  [LATIN CAPITAL LETTER W WITH DOT ABOVE]
-"\u1E86" => "W"
-
-# Ẉ  [LATIN CAPITAL LETTER W WITH DOT BELOW]
-"\u1E88" => "W"
-
-# Ⓦ  [CIRCLED LATIN CAPITAL LETTER W]
-"\u24CC" => "W"
-
-# Ⱳ  [LATIN CAPITAL LETTER W WITH HOOK]
-"\u2C72" => "W"
-
-# Ｗ  [FULLWIDTH LATIN CAPITAL LETTER W]
-"\uFF37" => "W"
-
-# ŵ  [LATIN SMALL LETTER W WITH CIRCUMFLEX]
-"\u0175" => "w"
-
-# ƿ  http://en.wikipedia.org/wiki/Wynn  [LATIN LETTER WYNN]
-"\u01BF" => "w"
-
-# ʍ  [LATIN SMALL LETTER TURNED W]
-"\u028D" => "w"
-
-# ẁ  [LATIN SMALL LETTER W WITH GRAVE]
-"\u1E81" => "w"
-
-# ẃ  [LATIN SMALL LETTER W WITH ACUTE]
-"\u1E83" => "w"
-
-# ẅ  [LATIN SMALL LETTER W WITH DIAERESIS]
-"\u1E85" => "w"
-
-# ẇ  [LATIN SMALL LETTER W WITH DOT ABOVE]
-"\u1E87" => "w"
-
-# ẉ  [LATIN SMALL LETTER W WITH DOT BELOW]
-"\u1E89" => "w"
-
-# ẘ  [LATIN SMALL LETTER W WITH RING ABOVE]
-"\u1E98" => "w"
-
-# ⓦ  [CIRCLED LATIN SMALL LETTER W]
-"\u24E6" => "w"
-
-# ⱳ  [LATIN SMALL LETTER W WITH HOOK]
-"\u2C73" => "w"
-
-# ｗ  [FULLWIDTH LATIN SMALL LETTER W]
-"\uFF57" => "w"
-
-# ⒲  [PARENTHESIZED LATIN SMALL LETTER W]
-"\u24B2" => "(w)"
-
-# Ẋ  [LATIN CAPITAL LETTER X WITH DOT ABOVE]
-"\u1E8A" => "X"
-
-# Ẍ  [LATIN CAPITAL LETTER X WITH DIAERESIS]
-"\u1E8C" => "X"
-
-# Ⓧ  [CIRCLED LATIN CAPITAL LETTER X]
-"\u24CD" => "X"
-
-# Ｘ  [FULLWIDTH LATIN CAPITAL LETTER X]
-"\uFF38" => "X"
-
-# ᶍ  [LATIN SMALL LETTER X WITH PALATAL HOOK]
-"\u1D8D" => "x"
-
-# ẋ  [LATIN SMALL LETTER X WITH DOT ABOVE]
-"\u1E8B" => "x"
-
-# ẍ  [LATIN SMALL LETTER X WITH DIAERESIS]
-"\u1E8D" => "x"
-
-# ₓ  [LATIN SUBSCRIPT SMALL LETTER X]
-"\u2093" => "x"
-
-# ⓧ  [CIRCLED LATIN SMALL LETTER X]
-"\u24E7" => "x"
-
-# ｘ  [FULLWIDTH LATIN SMALL LETTER X]
-"\uFF58" => "x"
-
-# ⒳  [PARENTHESIZED LATIN SMALL LETTER X]
-"\u24B3" => "(x)"
-
-# Ý  [LATIN CAPITAL LETTER Y WITH ACUTE]
-"\u00DD" => "Y"
-
-# Ŷ  [LATIN CAPITAL LETTER Y WITH CIRCUMFLEX]
-"\u0176" => "Y"
-
-# Ÿ  [LATIN CAPITAL LETTER Y WITH DIAERESIS]
-"\u0178" => "Y"
-
-# Ƴ  [LATIN CAPITAL LETTER Y WITH HOOK]
-"\u01B3" => "Y"
-
-# Ȳ  [LATIN CAPITAL LETTER Y WITH MACRON]
-"\u0232" => "Y"
-
-# Ɏ  [LATIN CAPITAL LETTER Y WITH STROKE]
-"\u024E" => "Y"
-
-# ʏ  [LATIN LETTER SMALL CAPITAL Y]
-"\u028F" => "Y"
-
-# Ẏ  [LATIN CAPITAL LETTER Y WITH DOT ABOVE]
-"\u1E8E" => "Y"
-
-# Ỳ  [LATIN CAPITAL LETTER Y WITH GRAVE]
-"\u1EF2" => "Y"
-
-# Ỵ  [LATIN CAPITAL LETTER Y WITH DOT BELOW]
-"\u1EF4" => "Y"
-
-# Ỷ  [LATIN CAPITAL LETTER Y WITH HOOK ABOVE]
-"\u1EF6" => "Y"
-
-# Ỹ  [LATIN CAPITAL LETTER Y WITH TILDE]
-"\u1EF8" => "Y"
-
-# Ỿ  [LATIN CAPITAL LETTER Y WITH LOOP]
-"\u1EFE" => "Y"
-
-# Ⓨ  [CIRCLED LATIN CAPITAL LETTER Y]
-"\u24CE" => "Y"
-
-# Ｙ  [FULLWIDTH LATIN CAPITAL LETTER Y]
-"\uFF39" => "Y"
-
-# ý  [LATIN SMALL LETTER Y WITH ACUTE]
-"\u00FD" => "y"
-
-# ÿ  [LATIN SMALL LETTER Y WITH DIAERESIS]
-"\u00FF" => "y"
-
-# ŷ  [LATIN SMALL LETTER Y WITH CIRCUMFLEX]
-"\u0177" => "y"
-
-# ƴ  [LATIN SMALL LETTER Y WITH HOOK]
-"\u01B4" => "y"
-
-# ȳ  [LATIN SMALL LETTER Y WITH MACRON]
-"\u0233" => "y"
-
-# ɏ  [LATIN SMALL LETTER Y WITH STROKE]
-"\u024F" => "y"
-
-# ʎ  [LATIN SMALL LETTER TURNED Y]
-"\u028E" => "y"
-
-# ẏ  [LATIN SMALL LETTER Y WITH DOT ABOVE]
-"\u1E8F" => "y"
-
-# ẙ  [LATIN SMALL LETTER Y WITH RING ABOVE]
-"\u1E99" => "y"
-
-# ỳ  [LATIN SMALL LETTER Y WITH GRAVE]
-"\u1EF3" => "y"
-
-# ỵ  [LATIN SMALL LETTER Y WITH DOT BELOW]
-"\u1EF5" => "y"
-
-# ỷ  [LATIN SMALL LETTER Y WITH HOOK ABOVE]
-"\u1EF7" => "y"
-
-# ỹ  [LATIN SMALL LETTER Y WITH TILDE]
-"\u1EF9" => "y"
-
-# ỿ  [LATIN SMALL LETTER Y WITH LOOP]
-"\u1EFF" => "y"
-
-# ⓨ  [CIRCLED LATIN SMALL LETTER Y]
-"\u24E8" => "y"
-
-# ｙ  [FULLWIDTH LATIN SMALL LETTER Y]
-"\uFF59" => "y"
-
-# ⒴  [PARENTHESIZED LATIN SMALL LETTER Y]
-"\u24B4" => "(y)"
-
-# Ź  [LATIN CAPITAL LETTER Z WITH ACUTE]
-"\u0179" => "Z"
-
-# Ż  [LATIN CAPITAL LETTER Z WITH DOT ABOVE]
-"\u017B" => "Z"
-
-# Ž  [LATIN CAPITAL LETTER Z WITH CARON]
-"\u017D" => "Z"
-
-# Ƶ  [LATIN CAPITAL LETTER Z WITH STROKE]
-"\u01B5" => "Z"
-
-# Ȝ  http://en.wikipedia.org/wiki/Yogh  [LATIN CAPITAL LETTER YOGH]
-"\u021C" => "Z"
-
-# Ȥ  [LATIN CAPITAL LETTER Z WITH HOOK]
-"\u0224" => "Z"
-
-# ᴢ  [LATIN LETTER SMALL CAPITAL Z]
-"\u1D22" => "Z"
-
-# Ẑ  [LATIN CAPITAL LETTER Z WITH CIRCUMFLEX]
-"\u1E90" => "Z"
-
-# Ẓ  [LATIN CAPITAL LETTER Z WITH DOT BELOW]
-"\u1E92" => "Z"
-
-# Ẕ  [LATIN CAPITAL LETTER Z WITH LINE BELOW]
-"\u1E94" => "Z"
-
-# Ⓩ  [CIRCLED LATIN CAPITAL LETTER Z]
-"\u24CF" => "Z"
-
-# Ⱬ  [LATIN CAPITAL LETTER Z WITH DESCENDER]
-"\u2C6B" => "Z"
-
-# Ꝣ  [LATIN CAPITAL LETTER VISIGOTHIC Z]
-"\uA762" => "Z"
-
-# Ｚ  [FULLWIDTH LATIN CAPITAL LETTER Z]
-"\uFF3A" => "Z"
-
-# ź  [LATIN SMALL LETTER Z WITH ACUTE]
-"\u017A" => "z"
-
-# ż  [LATIN SMALL LETTER Z WITH DOT ABOVE]
-"\u017C" => "z"
-
-# ž  [LATIN SMALL LETTER Z WITH CARON]
-"\u017E" => "z"
-
-# ƶ  [LATIN SMALL LETTER Z WITH STROKE]
-"\u01B6" => "z"
-
-# ȝ  http://en.wikipedia.org/wiki/Yogh  [LATIN SMALL LETTER YOGH]
-"\u021D" => "z"
-
-# ȥ  [LATIN SMALL LETTER Z WITH HOOK]
-"\u0225" => "z"
-
-# ɀ  [LATIN SMALL LETTER Z WITH SWASH TAIL]
-"\u0240" => "z"
-
-# ʐ  [LATIN SMALL LETTER Z WITH RETROFLEX HOOK]
-"\u0290" => "z"
-
-# ʑ  [LATIN SMALL LETTER Z WITH CURL]
-"\u0291" => "z"
-
-# ᵶ  [LATIN SMALL LETTER Z WITH MIDDLE TILDE]
-"\u1D76" => "z"
-
-# ᶎ  [LATIN SMALL LETTER Z WITH PALATAL HOOK]
-"\u1D8E" => "z"
-
-# ẑ  [LATIN SMALL LETTER Z WITH CIRCUMFLEX]
-"\u1E91" => "z"
-
-# ẓ  [LATIN SMALL LETTER Z WITH DOT BELOW]
-"\u1E93" => "z"
-
-# ẕ  [LATIN SMALL LETTER Z WITH LINE BELOW]
-"\u1E95" => "z"
-
-# ⓩ  [CIRCLED LATIN SMALL LETTER Z]
-"\u24E9" => "z"
-
-# ⱬ  [LATIN SMALL LETTER Z WITH DESCENDER]
-"\u2C6C" => "z"
-
-# ꝣ  [LATIN SMALL LETTER VISIGOTHIC Z]
-"\uA763" => "z"
-
-# ｚ  [FULLWIDTH LATIN SMALL LETTER Z]
-"\uFF5A" => "z"
-
-# ⒵  [PARENTHESIZED LATIN SMALL LETTER Z]
-"\u24B5" => "(z)"
-
-# ⁰  [SUPERSCRIPT ZERO]
-"\u2070" => "0"
-
-# ₀  [SUBSCRIPT ZERO]
-"\u2080" => "0"
-
-# ⓪  [CIRCLED DIGIT ZERO]
-"\u24EA" => "0"
-
-# ⓿  [NEGATIVE CIRCLED DIGIT ZERO]
-"\u24FF" => "0"
-
-# ０  [FULLWIDTH DIGIT ZERO]
-"\uFF10" => "0"
-
-# ¹  [SUPERSCRIPT ONE]
-"\u00B9" => "1"
-
-# ₁  [SUBSCRIPT ONE]
-"\u2081" => "1"
-
-# ①  [CIRCLED DIGIT ONE]
-"\u2460" => "1"
-
-# ⓵  [DOUBLE CIRCLED DIGIT ONE]
-"\u24F5" => "1"
-
-# ❶  [DINGBAT NEGATIVE CIRCLED DIGIT ONE]
-"\u2776" => "1"
-
-# ➀  [DINGBAT CIRCLED SANS-SERIF DIGIT ONE]
-"\u2780" => "1"
-
-# ➊  [DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT ONE]
-"\u278A" => "1"
-
-# １  [FULLWIDTH DIGIT ONE]
-"\uFF11" => "1"
-
-# ⒈  [DIGIT ONE FULL STOP]
-"\u2488" => "1."
-
-# ⑴  [PARENTHESIZED DIGIT ONE]
-"\u2474" => "(1)"
-
-# ²  [SUPERSCRIPT TWO]
-"\u00B2" => "2"
-
-# ₂  [SUBSCRIPT TWO]
-"\u2082" => "2"
-
-# ②  [CIRCLED DIGIT TWO]
-"\u2461" => "2"
-
-# ⓶  [DOUBLE CIRCLED DIGIT TWO]
-"\u24F6" => "2"
-
-# ❷  [DINGBAT NEGATIVE CIRCLED DIGIT TWO]
-"\u2777" => "2"
-
-# ➁  [DINGBAT CIRCLED SANS-SERIF DIGIT TWO]
-"\u2781" => "2"
-
-# ➋  [DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT TWO]
-"\u278B" => "2"
-
-# ２  [FULLWIDTH DIGIT TWO]
-"\uFF12" => "2"
-
-# ⒉  [DIGIT TWO FULL STOP]
-"\u2489" => "2."
-
-# ⑵  [PARENTHESIZED DIGIT TWO]
-"\u2475" => "(2)"
-
-# ³  [SUPERSCRIPT THREE]
-"\u00B3" => "3"
-
-# ₃  [SUBSCRIPT THREE]
-"\u2083" => "3"
-
-# ③  [CIRCLED DIGIT THREE]
-"\u2462" => "3"
-
-# ⓷  [DOUBLE CIRCLED DIGIT THREE]
-"\u24F7" => "3"
-
-# ❸  [DINGBAT NEGATIVE CIRCLED DIGIT THREE]
-"\u2778" => "3"
-
-# ➂  [DINGBAT CIRCLED SANS-SERIF DIGIT THREE]
-"\u2782" => "3"
-
-# ➌  [DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT THREE]
-"\u278C" => "3"
-
-# ３  [FULLWIDTH DIGIT THREE]
-"\uFF13" => "3"
-
-# ⒊  [DIGIT THREE FULL STOP]
-"\u248A" => "3."
-
-# ⑶  [PARENTHESIZED DIGIT THREE]
-"\u2476" => "(3)"
-
-# ⁴  [SUPERSCRIPT FOUR]
-"\u2074" => "4"
-
-# ₄  [SUBSCRIPT FOUR]
-"\u2084" => "4"
-
-# ④  [CIRCLED DIGIT FOUR]
-"\u2463" => "4"
-
-# ⓸  [DOUBLE CIRCLED DIGIT FOUR]
-"\u24F8" => "4"
-
-# ❹  [DINGBAT NEGATIVE CIRCLED DIGIT FOUR]
-"\u2779" => "4"
-
-# ➃  [DINGBAT CIRCLED SANS-SERIF DIGIT FOUR]
-"\u2783" => "4"
-
-# ➍  [DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT FOUR]
-"\u278D" => "4"
-
-# ４  [FULLWIDTH DIGIT FOUR]
-"\uFF14" => "4"
-
-# ⒋  [DIGIT FOUR FULL STOP]
-"\u248B" => "4."
-
-# ⑷  [PARENTHESIZED DIGIT FOUR]
-"\u2477" => "(4)"
-
-# ⁵  [SUPERSCRIPT FIVE]
-"\u2075" => "5"
-
-# ₅  [SUBSCRIPT FIVE]
-"\u2085" => "5"
-
-# ⑤  [CIRCLED DIGIT FIVE]
-"\u2464" => "5"
-
-# ⓹  [DOUBLE CIRCLED DIGIT FIVE]
-"\u24F9" => "5"
-
-# ❺  [DINGBAT NEGATIVE CIRCLED DIGIT FIVE]
-"\u277A" => "5"
-
-# ➄  [DINGBAT CIRCLED SANS-SERIF DIGIT FIVE]
-"\u2784" => "5"
-
-# ➎  [DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT FIVE]
-"\u278E" => "5"
-
-# ５  [FULLWIDTH DIGIT FIVE]
-"\uFF15" => "5"
-
-# ⒌  [DIGIT FIVE FULL STOP]
-"\u248C" => "5."
-
-# ⑸  [PARENTHESIZED DIGIT FIVE]
-"\u2478" => "(5)"
-
-# ⁶  [SUPERSCRIPT SIX]
-"\u2076" => "6"
-
-# ₆  [SUBSCRIPT SIX]
-"\u2086" => "6"
-
-# ⑥  [CIRCLED DIGIT SIX]
-"\u2465" => "6"
-
-# ⓺  [DOUBLE CIRCLED DIGIT SIX]
-"\u24FA" => "6"
-
-# ❻  [DINGBAT NEGATIVE CIRCLED DIGIT SIX]
-"\u277B" => "6"
-
-# ➅  [DINGBAT CIRCLED SANS-SERIF DIGIT SIX]
-"\u2785" => "6"
-
-# ➏  [DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT SIX]
-"\u278F" => "6"
-
-# ６  [FULLWIDTH DIGIT SIX]
-"\uFF16" => "6"
-
-# ⒍  [DIGIT SIX FULL STOP]
-"\u248D" => "6."
-
-# ⑹  [PARENTHESIZED DIGIT SIX]
-"\u2479" => "(6)"
-
-# ⁷  [SUPERSCRIPT SEVEN]
-"\u2077" => "7"
-
-# ₇  [SUBSCRIPT SEVEN]
-"\u2087" => "7"
-
-# ⑦  [CIRCLED DIGIT SEVEN]
-"\u2466" => "7"
-
-# ⓻  [DOUBLE CIRCLED DIGIT SEVEN]
-"\u24FB" => "7"
-
-# ❼  [DINGBAT NEGATIVE CIRCLED DIGIT SEVEN]
-"\u277C" => "7"
-
-# ➆  [DINGBAT CIRCLED SANS-SERIF DIGIT SEVEN]
-"\u2786" => "7"
-
-# ➐  [DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT SEVEN]
-"\u2790" => "7"
-
-# ７  [FULLWIDTH DIGIT SEVEN]
-"\uFF17" => "7"
-
-# ⒎  [DIGIT SEVEN FULL STOP]
-"\u248E" => "7."
-
-# ⑺  [PARENTHESIZED DIGIT SEVEN]
-"\u247A" => "(7)"
-
-# ⁸  [SUPERSCRIPT EIGHT]
-"\u2078" => "8"
-
-# ₈  [SUBSCRIPT EIGHT]
-"\u2088" => "8"
-
-# ⑧  [CIRCLED DIGIT EIGHT]
-"\u2467" => "8"
-
-# ⓼  [DOUBLE CIRCLED DIGIT EIGHT]
-"\u24FC" => "8"
-
-# ❽  [DINGBAT NEGATIVE CIRCLED DIGIT EIGHT]
-"\u277D" => "8"
-
-# ➇  [DINGBAT CIRCLED SANS-SERIF DIGIT EIGHT]
-"\u2787" => "8"
-
-# ➑  [DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT EIGHT]
-"\u2791" => "8"
-
-# ８  [FULLWIDTH DIGIT EIGHT]
-"\uFF18" => "8"
-
-# ⒏  [DIGIT EIGHT FULL STOP]
-"\u248F" => "8."
-
-# ⑻  [PARENTHESIZED DIGIT EIGHT]
-"\u247B" => "(8)"
-
-# ⁹  [SUPERSCRIPT NINE]
-"\u2079" => "9"
-
-# ₉  [SUBSCRIPT NINE]
-"\u2089" => "9"
-
-# ⑨  [CIRCLED DIGIT NINE]
-"\u2468" => "9"
-
-# ⓽  [DOUBLE CIRCLED DIGIT NINE]
-"\u24FD" => "9"
-
-# ❾  [DINGBAT NEGATIVE CIRCLED DIGIT NINE]
-"\u277E" => "9"
-
-# ➈  [DINGBAT CIRCLED SANS-SERIF DIGIT NINE]
-"\u2788" => "9"
-
-# ➒  [DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT NINE]
-"\u2792" => "9"
-
-# ９  [FULLWIDTH DIGIT NINE]
-"\uFF19" => "9"
-
-# ⒐  [DIGIT NINE FULL STOP]
-"\u2490" => "9."
-
-# ⑼  [PARENTHESIZED DIGIT NINE]
-"\u247C" => "(9)"
-
-# ⑩  [CIRCLED NUMBER TEN]
-"\u2469" => "10"
-
-# ⓾  [DOUBLE CIRCLED NUMBER TEN]
-"\u24FE" => "10"
-
-# ❿  [DINGBAT NEGATIVE CIRCLED NUMBER TEN]
-"\u277F" => "10"
-
-# ➉  [DINGBAT CIRCLED SANS-SERIF NUMBER TEN]
-"\u2789" => "10"
-
-# ➓  [DINGBAT NEGATIVE CIRCLED SANS-SERIF NUMBER TEN]
-"\u2793" => "10"
-
-# ⒑  [NUMBER TEN FULL STOP]
-"\u2491" => "10."
-
-# ⑽  [PARENTHESIZED NUMBER TEN]
-"\u247D" => "(10)"
-
-# ⑪  [CIRCLED NUMBER ELEVEN]
-"\u246A" => "11"
-
-# ⓫  [NEGATIVE CIRCLED NUMBER ELEVEN]
-"\u24EB" => "11"
-
-# ⒒  [NUMBER ELEVEN FULL STOP]
-"\u2492" => "11."
-
-# ⑾  [PARENTHESIZED NUMBER ELEVEN]
-"\u247E" => "(11)"
-
-# ⑫  [CIRCLED NUMBER TWELVE]
-"\u246B" => "12"
-
-# ⓬  [NEGATIVE CIRCLED NUMBER TWELVE]
-"\u24EC" => "12"
-
-# ⒓  [NUMBER TWELVE FULL STOP]
-"\u2493" => "12."
-
-# ⑿  [PARENTHESIZED NUMBER TWELVE]
-"\u247F" => "(12)"
-
-# ⑬  [CIRCLED NUMBER THIRTEEN]
-"\u246C" => "13"
-
-# ⓭  [NEGATIVE CIRCLED NUMBER THIRTEEN]
-"\u24ED" => "13"
-
-# ⒔  [NUMBER THIRTEEN FULL STOP]
-"\u2494" => "13."
-
-# ⒀  [PARENTHESIZED NUMBER THIRTEEN]
-"\u2480" => "(13)"
-
-# ⑭  [CIRCLED NUMBER FOURTEEN]
-"\u246D" => "14"
-
-# ⓮  [NEGATIVE CIRCLED NUMBER FOURTEEN]
-"\u24EE" => "14"
-
-# ⒕  [NUMBER FOURTEEN FULL STOP]
-"\u2495" => "14."
-
-# ⒁  [PARENTHESIZED NUMBER FOURTEEN]
-"\u2481" => "(14)"
-
-# ⑮  [CIRCLED NUMBER FIFTEEN]
-"\u246E" => "15"
-
-# ⓯  [NEGATIVE CIRCLED NUMBER FIFTEEN]
-"\u24EF" => "15"
-
-# ⒖  [NUMBER FIFTEEN FULL STOP]
-"\u2496" => "15."
-
-# ⒂  [PARENTHESIZED NUMBER FIFTEEN]
-"\u2482" => "(15)"
-
-# ⑯  [CIRCLED NUMBER SIXTEEN]
-"\u246F" => "16"
-
-# ⓰  [NEGATIVE CIRCLED NUMBER SIXTEEN]
-"\u24F0" => "16"
-
-# ⒗  [NUMBER SIXTEEN FULL STOP]
-"\u2497" => "16."
-
-# ⒃  [PARENTHESIZED NUMBER SIXTEEN]
-"\u2483" => "(16)"
-
-# ⑰  [CIRCLED NUMBER SEVENTEEN]
-"\u2470" => "17"
-
-# ⓱  [NEGATIVE CIRCLED NUMBER SEVENTEEN]
-"\u24F1" => "17"
-
-# ⒘  [NUMBER SEVENTEEN FULL STOP]
-"\u2498" => "17."
-
-# ⒄  [PARENTHESIZED NUMBER SEVENTEEN]
-"\u2484" => "(17)"
-
-# ⑱  [CIRCLED NUMBER EIGHTEEN]
-"\u2471" => "18"
-
-# ⓲  [NEGATIVE CIRCLED NUMBER EIGHTEEN]
-"\u24F2" => "18"
-
-# ⒙  [NUMBER EIGHTEEN FULL STOP]
-"\u2499" => "18."
-
-# ⒅  [PARENTHESIZED NUMBER EIGHTEEN]
-"\u2485" => "(18)"
-
-# ⑲  [CIRCLED NUMBER NINETEEN]
-"\u2472" => "19"
-
-# ⓳  [NEGATIVE CIRCLED NUMBER NINETEEN]
-"\u24F3" => "19"
-
-# ⒚  [NUMBER NINETEEN FULL STOP]
-"\u249A" => "19."
-
-# ⒆  [PARENTHESIZED NUMBER NINETEEN]
-"\u2486" => "(19)"
-
-# ⑳  [CIRCLED NUMBER TWENTY]
-"\u2473" => "20"
-
-# ⓴  [NEGATIVE CIRCLED NUMBER TWENTY]
-"\u24F4" => "20"
-
-# ⒛  [NUMBER TWENTY FULL STOP]
-"\u249B" => "20."
-
-# ⒇  [PARENTHESIZED NUMBER TWENTY]
-"\u2487" => "(20)"
-
-# «  [LEFT-POINTING DOUBLE ANGLE QUOTATION MARK]
-"\u00AB" => "\""
-
-# »  [RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK]
-"\u00BB" => "\""
-
-# “  [LEFT DOUBLE QUOTATION MARK]
-"\u201C" => "\""
-
-# ”  [RIGHT DOUBLE QUOTATION MARK]
-"\u201D" => "\""
-
-# „  [DOUBLE LOW-9 QUOTATION MARK]
-"\u201E" => "\""
-
-# ″  [DOUBLE PRIME]
-"\u2033" => "\""
-
-# ‶  [REVERSED DOUBLE PRIME]
-"\u2036" => "\""
-
-# ❝  [HEAVY DOUBLE TURNED COMMA QUOTATION MARK ORNAMENT]
-"\u275D" => "\""
-
-# ❞  [HEAVY DOUBLE COMMA QUOTATION MARK ORNAMENT]
-"\u275E" => "\""
-
-# ❮  [HEAVY LEFT-POINTING ANGLE QUOTATION MARK ORNAMENT]
-"\u276E" => "\""
-
-# ❯  [HEAVY RIGHT-POINTING ANGLE QUOTATION MARK ORNAMENT]
-"\u276F" => "\""
-
-# ＂  [FULLWIDTH QUOTATION MARK]
-"\uFF02" => "\""
-
-# ‘  [LEFT SINGLE QUOTATION MARK]
-"\u2018" => "\'"
-
-# ’  [RIGHT SINGLE QUOTATION MARK]
-"\u2019" => "\'"
-
-# ‚  [SINGLE LOW-9 QUOTATION MARK]
-"\u201A" => "\'"
-
-# ‛  [SINGLE HIGH-REVERSED-9 QUOTATION MARK]
-"\u201B" => "\'"
-
-# ′  [PRIME]
-"\u2032" => "\'"
-
-# ‵  [REVERSED PRIME]
-"\u2035" => "\'"
-
-# ‹  [SINGLE LEFT-POINTING ANGLE QUOTATION MARK]
-"\u2039" => "\'"
-
-# ›  [SINGLE RIGHT-POINTING ANGLE QUOTATION MARK]
-"\u203A" => "\'"
-
-# ❛  [HEAVY SINGLE TURNED COMMA QUOTATION MARK ORNAMENT]
-"\u275B" => "\'"
-
-# ❜  [HEAVY SINGLE COMMA QUOTATION MARK ORNAMENT]
-"\u275C" => "\'"
-
-# ＇  [FULLWIDTH APOSTROPHE]
-"\uFF07" => "\'"
-
-# ‐  [HYPHEN]
-"\u2010" => "-"
-
-# ‑  [NON-BREAKING HYPHEN]
-"\u2011" => "-"
-
-# ‒  [FIGURE DASH]
-"\u2012" => "-"
-
-# –  [EN DASH]
-"\u2013" => "-"
-
-# —  [EM DASH]
-"\u2014" => "-"
-
-# ⁻  [SUPERSCRIPT MINUS]
-"\u207B" => "-"
-
-# ₋  [SUBSCRIPT MINUS]
-"\u208B" => "-"
-
-# －  [FULLWIDTH HYPHEN-MINUS]
-"\uFF0D" => "-"
-
-# ⁅  [LEFT SQUARE BRACKET WITH QUILL]
-"\u2045" => "["
-
-# ❲  [LIGHT LEFT TORTOISE SHELL BRACKET ORNAMENT]
-"\u2772" => "["
-
-# ［  [FULLWIDTH LEFT SQUARE BRACKET]
-"\uFF3B" => "["
-
-# ⁆  [RIGHT SQUARE BRACKET WITH QUILL]
-"\u2046" => "]"
-
-# ❳  [LIGHT RIGHT TORTOISE SHELL BRACKET ORNAMENT]
-"\u2773" => "]"
-
-# ］  [FULLWIDTH RIGHT SQUARE BRACKET]
-"\uFF3D" => "]"
-
-# ⁽  [SUPERSCRIPT LEFT PARENTHESIS]
-"\u207D" => "("
-
-# ₍  [SUBSCRIPT LEFT PARENTHESIS]
-"\u208D" => "("
-
-# ❨  [MEDIUM LEFT PARENTHESIS ORNAMENT]
-"\u2768" => "("
-
-# ❪  [MEDIUM FLATTENED LEFT PARENTHESIS ORNAMENT]
-"\u276A" => "("
-
-# （  [FULLWIDTH LEFT PARENTHESIS]
-"\uFF08" => "("
-
-# ⸨  [LEFT DOUBLE PARENTHESIS]
-"\u2E28" => "(("
-
-# ⁾  [SUPERSCRIPT RIGHT PARENTHESIS]
-"\u207E" => ")"
-
-# ₎  [SUBSCRIPT RIGHT PARENTHESIS]
-"\u208E" => ")"
-
-# ❩  [MEDIUM RIGHT PARENTHESIS ORNAMENT]
-"\u2769" => ")"
-
-# ❫  [MEDIUM FLATTENED RIGHT PARENTHESIS ORNAMENT]
-"\u276B" => ")"
-
-# ）  [FULLWIDTH RIGHT PARENTHESIS]
-"\uFF09" => ")"
-
-# ⸩  [RIGHT DOUBLE PARENTHESIS]
-"\u2E29" => "))"
-
-# ❬  [MEDIUM LEFT-POINTING ANGLE BRACKET ORNAMENT]
-"\u276C" => "<"
-
-# ❰  [HEAVY LEFT-POINTING ANGLE BRACKET ORNAMENT]
-"\u2770" => "<"
-
-# ＜  [FULLWIDTH LESS-THAN SIGN]
-"\uFF1C" => "<"
-
-# ❭  [MEDIUM RIGHT-POINTING ANGLE BRACKET ORNAMENT]
-"\u276D" => ">"
-
-# ❱  [HEAVY RIGHT-POINTING ANGLE BRACKET ORNAMENT]
-"\u2771" => ">"
-
-# ＞  [FULLWIDTH GREATER-THAN SIGN]
-"\uFF1E" => ">"
-
-# ❴  [MEDIUM LEFT CURLY BRACKET ORNAMENT]
-"\u2774" => "{"
-
-# ｛  [FULLWIDTH LEFT CURLY BRACKET]
-"\uFF5B" => "{"
-
-# ❵  [MEDIUM RIGHT CURLY BRACKET ORNAMENT]
-"\u2775" => "}"
-
-# ｝  [FULLWIDTH RIGHT CURLY BRACKET]
-"\uFF5D" => "}"
-
-# ⁺  [SUPERSCRIPT PLUS SIGN]
-"\u207A" => "+"
-
-# ₊  [SUBSCRIPT PLUS SIGN]
-"\u208A" => "+"
-
-# ＋  [FULLWIDTH PLUS SIGN]
-"\uFF0B" => "+"
-
-# ⁼  [SUPERSCRIPT EQUALS SIGN]
-"\u207C" => "="
-
-# ₌  [SUBSCRIPT EQUALS SIGN]
-"\u208C" => "="
-
-# ＝  [FULLWIDTH EQUALS SIGN]
-"\uFF1D" => "="
-
-# ！  [FULLWIDTH EXCLAMATION MARK]
-"\uFF01" => "!"
-
-# ‼  [DOUBLE EXCLAMATION MARK]
-"\u203C" => "!!"
-
-# ⁉  [EXCLAMATION QUESTION MARK]
-"\u2049" => "!?"
-
-# ＃  [FULLWIDTH NUMBER SIGN]
-"\uFF03" => "#"
-
-# ＄  [FULLWIDTH DOLLAR SIGN]
-"\uFF04" => "$"
-
-# ⁒  [COMMERCIAL MINUS SIGN]
-"\u2052" => "%"
-
-# ％  [FULLWIDTH PERCENT SIGN]
-"\uFF05" => "%"
-
-# ＆  [FULLWIDTH AMPERSAND]
-"\uFF06" => "&"
-
-# ⁎  [LOW ASTERISK]
-"\u204E" => "*"
-
-# ＊  [FULLWIDTH ASTERISK]
-"\uFF0A" => "*"
-
-# ，  [FULLWIDTH COMMA]
-"\uFF0C" => ","
-
-# ．  [FULLWIDTH FULL STOP]
-"\uFF0E" => "."
-
-# ⁄  [FRACTION SLASH]
-"\u2044" => "/"
-
-# ／  [FULLWIDTH SOLIDUS]
-"\uFF0F" => "/"
-
-# ：  [FULLWIDTH COLON]
-"\uFF1A" => ":"
-
-# ⁏  [REVERSED SEMICOLON]
-"\u204F" => ";"
-
-# ；  [FULLWIDTH SEMICOLON]
-"\uFF1B" => ";"
-
-# ？  [FULLWIDTH QUESTION MARK]
-"\uFF1F" => "?"
-
-# ⁇  [DOUBLE QUESTION MARK]
-"\u2047" => "??"
-
-# ⁈  [QUESTION EXCLAMATION MARK]
-"\u2048" => "?!"
-
-# ＠  [FULLWIDTH COMMERCIAL AT]
-"\uFF20" => "@"
-
-# ＼  [FULLWIDTH REVERSE SOLIDUS]
-"\uFF3C" => "\\"
-
-# ‸  [CARET]
-"\u2038" => "^"
-
-# ＾  [FULLWIDTH CIRCUMFLEX ACCENT]
-"\uFF3E" => "^"
-
-# ＿  [FULLWIDTH LOW LINE]
-"\uFF3F" => "_"
-
-# ⁓  [SWUNG DASH]
-"\u2053" => "~"
-
-# ～  [FULLWIDTH TILDE]
-"\uFF5E" => "~"
-
-################################################################
-# Below is the Perl script used to generate the above mappings #
-# from ASCIIFoldingFilter.java:                                #
-################################################################
-#
-# #!/usr/bin/perl
-#
-# use warnings;
-# use strict;
-# 
-# my @source_chars = ();
-# my @source_char_descriptions = ();
-# my $target = '';
-# 
-# while (<>) {
-#   if (/case\s+'(\\u[A-F0-9]+)':\s*\/\/\s*(.*)/i) {
-#     push @source_chars, $1;
-#        push @source_char_descriptions, $2;
-#        next;
-#   }
-#   if (/output\[[^\]]+\]\s*=\s*'(\\'|\\\\|.)'/) {
-#     $target .= $1;
-#     next;
-#   }
-#   if (/break;/) {
-#     $target = "\\\"" if ($target eq '"');
-#     for my $source_char_num (0..$#source_chars) {
-#          print "# $source_char_descriptions[$source_char_num]\n";
-#          print "\"$source_chars[$source_char_num]\" => \"$target\"\n\n";
-#        }
-#        @source_chars = ();
-#        @source_char_descriptions = ();
-#        $target = '';
-#   }
-# }

diff --git a/zookeeper/solr/collection1/conf/mapping-ISOLatin1Accent.txt b/zookeeper/solr/collection1/conf/mapping-ISOLatin1Accent.txt
deleted file mode 100644 (file)
index ede7742..0000000
--- a/zookeeper/solr/collection1/conf/mapping-ISOLatin1Accent.txt
+++ /dev/null
@@ -1,246 +0,0 @@
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Syntax:
-#   "source" => "target"
-#     "source".length() > 0 (source cannot be empty.)
-#     "target".length() >= 0 (target can be empty.)
-
-# example:
-#   "À" => "A"
-#   "\u00C0" => "A"
-#   "\u00C0" => "\u0041"
-#   "ß" => "ss"
-#   "\t" => " "
-#   "\n" => ""
-
-# À => A
-"\u00C0" => "A"
-
-# Á => A
-"\u00C1" => "A"
-
-# Â => A
-"\u00C2" => "A"
-
-# Ã => A
-"\u00C3" => "A"
-
-# Ä => A
-"\u00C4" => "A"
-
-# Å => A
-"\u00C5" => "A"
-
-# Æ => AE
-"\u00C6" => "AE"
-
-# Ç => C
-"\u00C7" => "C"
-
-# È => E
-"\u00C8" => "E"
-
-# É => E
-"\u00C9" => "E"
-
-# Ê => E
-"\u00CA" => "E"
-
-# Ë => E
-"\u00CB" => "E"
-
-# Ì => I
-"\u00CC" => "I"
-
-# Í => I
-"\u00CD" => "I"
-
-# Î => I
-"\u00CE" => "I"
-
-# Ï => I
-"\u00CF" => "I"
-
-# IJ => IJ
-"\u0132" => "IJ"
-
-# Ð => D
-"\u00D0" => "D"
-
-# Ñ => N
-"\u00D1" => "N"
-
-# Ò => O
-"\u00D2" => "O"
-
-# Ó => O
-"\u00D3" => "O"
-
-# Ô => O
-"\u00D4" => "O"
-
-# Õ => O
-"\u00D5" => "O"
-
-# Ö => O
-"\u00D6" => "O"
-
-# Ø => O
-"\u00D8" => "O"
-
-# Π=> OE
-"\u0152" => "OE"
-
-# Þ
-"\u00DE" => "TH"
-
-# Ù => U
-"\u00D9" => "U"
-
-# Ú => U
-"\u00DA" => "U"
-
-# Û => U
-"\u00DB" => "U"
-
-# Ü => U
-"\u00DC" => "U"
-
-# Ý => Y
-"\u00DD" => "Y"
-
-# Ÿ => Y
-"\u0178" => "Y"
-
-# à => a
-"\u00E0" => "a"
-
-# á => a
-"\u00E1" => "a"
-
-# â => a
-"\u00E2" => "a"
-
-# ã => a
-"\u00E3" => "a"
-
-# ä => a
-"\u00E4" => "a"
-
-# å => a
-"\u00E5" => "a"
-
-# æ => ae
-"\u00E6" => "ae"
-
-# ç => c
-"\u00E7" => "c"
-
-# è => e
-"\u00E8" => "e"
-
-# é => e
-"\u00E9" => "e"
-
-# ê => e
-"\u00EA" => "e"
-
-# ë => e
-"\u00EB" => "e"
-
-# ì => i
-"\u00EC" => "i"
-
-# í => i
-"\u00ED" => "i"
-
-# î => i
-"\u00EE" => "i"
-
-# ï => i
-"\u00EF" => "i"
-
-# ij => ij
-"\u0133" => "ij"
-
-# ð => d
-"\u00F0" => "d"
-
-# ñ => n
-"\u00F1" => "n"
-
-# ò => o
-"\u00F2" => "o"
-
-# ó => o
-"\u00F3" => "o"
-
-# ô => o
-"\u00F4" => "o"
-
-# õ => o
-"\u00F5" => "o"
-
-# ö => o
-"\u00F6" => "o"
-
-# ø => o
-"\u00F8" => "o"
-
-# œ => oe
-"\u0153" => "oe"
-
-# ß => ss
-"\u00DF" => "ss"
-
-# þ => th
-"\u00FE" => "th"
-
-# ù => u
-"\u00F9" => "u"
-
-# ú => u
-"\u00FA" => "u"
-
-# û => u
-"\u00FB" => "u"
-
-# ü => u
-"\u00FC" => "u"
-
-# ý => y
-"\u00FD" => "y"
-
-# ÿ => y
-"\u00FF" => "y"
-
-# ff => ff
-"\uFB00" => "ff"
-
-# fi => fi
-"\uFB01" => "fi"
-
-# fl => fl
-"\uFB02" => "fl"
-
-# ffi => ffi
-"\uFB03" => "ffi"
-
-# ffl => ffl
-"\uFB04" => "ffl"
-
-# ſt => ft
-"\uFB05" => "ft"
-
-# st => st
-"\uFB06" => "st"

diff --git a/zookeeper/solr/collection1/conf/protwords.txt b/zookeeper/solr/collection1/conf/protwords.txt
deleted file mode 100644 (file)
index 1dfc0ab..0000000
--- a/zookeeper/solr/collection1/conf/protwords.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#-----------------------------------------------------------------------
-# Use a protected word file to protect against the stemmer reducing two
-# unrelated words to the same base word.
-
-# Some non-words that normally won't be encountered,
-# just to test that they won't be stemmed.
-dontstems
-zwhacky
-

diff --git a/zookeeper/solr/collection1/conf/schema.xml b/zookeeper/solr/collection1/conf/schema.xml
deleted file mode 100644 (file)
index df61c5e..0000000
--- a/zookeeper/solr/collection1/conf/schema.xml
+++ /dev/null
@@ -1,666 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!--  
- This is the Solr schema file. This file should be named "schema.xml" and
- should be in the conf directory under the solr home
- (i.e. ./solr/conf/schema.xml by default) 
- or located where the classloader for the Solr webapp can find it.
-
- This example schema is the recommended starting point for users.
- It should be kept correct and concise, usable out-of-the-box.
-
- For more information, on how to customize this file, please see
- http://wiki.apache.org/solr/SchemaXml
-
- PERFORMANCE NOTE: this schema includes many optional features and should not
- be used for benchmarking.  To improve performance one could
-  - set stored="false" for all fields possible (esp large fields) when you
-    only need to search on the field but don't need to return the original
-    value.
-  - set indexed="false" if you don't need to search on the field, but only
-    return the field as a result of searching on other indexed fields.
-  - remove all unneeded copyField statements
-  - for best index size and searching performance, set "index" to false
-    for all general text fields, use copyField to copy them to the
-    catchall "text" field, and use that for searching.
-  - For maximum indexing performance, use the StreamingUpdateSolrServer
-    java client.
-  - Remember to run the JVM in server mode, and use a higher logging level
-    that avoids logging every request
--->
-
-<schema name="Local Unified Index" version="1.2">
-  <!-- attribute "name" is the name of this schema and is only used for display purposes.
-       Applications should change this to reflect the nature of the search collection.
-       version="1.2" is Solr's version number for the schema syntax and semantics.  It should
-       not normally be changed by applications.
-       1.0: multiValued attribute did not exist, all fields are multiValued by nature
-       1.1: multiValued attribute introduced, false by default 
-       1.2: omitTermFreqAndPositions attribute introduced, true by default except for text fields.
-     -->
-
-  <types>
-    <!-- field type definitions. The "name" attribute is
-       just a label to be used by field definitions.  The "class"
-       attribute and any other attributes determine the real
-       behavior of the fieldType.
-         Class names starting with "solr" refer to java classes in the
-       org.apache.solr.analysis package.
-    -->
-
-    <!-- The StrField type is not analyzed, but indexed/stored verbatim.  
-       - StrField and TextField support an optional compressThreshold which
-       limits compression (if enabled in the derived fields) to values which
-       exceed a certain size (in characters).
-    -->
-    <fieldType name="string" class="solr.StrField" sortMissingLast="true" omitNorms="true"/>
-
-    <!-- boolean type: "true" or "false" -->
-    <fieldType name="boolean" class="solr.BoolField" sortMissingLast="true" omitNorms="true"/>
-    <!--Binary data type. The data should be sent/retrieved in as Base64 encoded Strings -->
-    <fieldtype name="binary" class="solr.BinaryField"/>
-
-    <!-- The optional sortMissingLast and sortMissingFirst attributes are
-         currently supported on types that are sorted internally as strings.
-              This includes "string","boolean","sint","slong","sfloat","sdouble","pdate"
-       - If sortMissingLast="true", then a sort on this field will cause documents
-         without the field to come after documents with the field,
-         regardless of the requested sort order (asc or desc).
-       - If sortMissingFirst="true", then a sort on this field will cause documents
-         without the field to come before documents with the field,
-         regardless of the requested sort order.
-       - If sortMissingLast="false" and sortMissingFirst="false" (the default),
-         then default lucene sorting will be used which places docs without the
-         field first in an ascending sort and last in a descending sort.
-    -->    
-
-    <!--
-      Default numeric field types. For faster range queries, consider the tint/tfloat/tlong/tdouble types.
-    -->
-    <fieldType name="int" class="solr.TrieIntField" precisionStep="0" omitNorms="true" positionIncrementGap="0"/>
-    <fieldType name="float" class="solr.TrieFloatField" precisionStep="0" omitNorms="true" positionIncrementGap="0"/>
-    <fieldType name="long" class="solr.TrieLongField" precisionStep="0" omitNorms="true" positionIncrementGap="0"/>
-    <fieldType name="double" class="solr.TrieDoubleField" precisionStep="0" omitNorms="true" positionIncrementGap="0"/>
-
-    <!--
-     Numeric field types that index each value at various levels of precision
-     to accelerate range queries when the number of values between the range
-     endpoints is large. See the javadoc for NumericRangeQuery for internal
-     implementation details.
-
-     Smaller precisionStep values (specified in bits) will lead to more tokens
-     indexed per value, slightly larger index size, and faster range queries.
-     A precisionStep of 0 disables indexing at different precision levels.
-    -->
-    <fieldType name="tint" class="solr.TrieIntField" precisionStep="8" omitNorms="true" positionIncrementGap="0"/>
-    <fieldType name="tfloat" class="solr.TrieFloatField" precisionStep="8" omitNorms="true" positionIncrementGap="0"/>
-    <fieldType name="tlong" class="solr.TrieLongField" precisionStep="8" omitNorms="true" positionIncrementGap="0"/>
-    <fieldType name="tdouble" class="solr.TrieDoubleField" precisionStep="8" omitNorms="true" positionIncrementGap="0"/>
-
-    <!-- The format for this date field is of the form 1995-12-31T23:59:59Z, and
-         is a more restricted form of the canonical representation of dateTime
-         http://www.w3.org/TR/xmlschema-2/#dateTime    
-         The trailing "Z" designates UTC time and is mandatory.
-         Optional fractional seconds are allowed: 1995-12-31T23:59:59.999Z
-         All other components are mandatory.
-
-         Expressions can also be used to denote calculations that should be
-         performed relative to "NOW" to determine the value, ie...
-
-               NOW/HOUR
-                  ... Round to the start of the current hour
-               NOW-1DAY
-                  ... Exactly 1 day prior to now
-               NOW/DAY+6MONTHS+3DAYS
-                  ... 6 months and 3 days in the future from the start of
-                      the current day
-                      
-         Consult the DateField javadocs for more information.
-
-         Note: For faster range queries, consider the tdate type
-      -->
-    <fieldType name="date" class="solr.TrieDateField" omitNorms="true" precisionStep="0" positionIncrementGap="0"/>
-
-    <!-- A Trie based date field for faster date range queries and date faceting. -->
-    <fieldType name="tdate" class="solr.TrieDateField" omitNorms="true" precisionStep="6" positionIncrementGap="0"/>
-
-    <!-- Test of new facet type that would support case-insensitive facetting -->
-    <fieldType name="facet" class="solr.TextField" sortMissingLast="true" omitNorms="true">
-      <analyzer>
-        <!-- KeywordTokenizer does no actual tokenizing, so the entire                                                                                                                                              
-             input string is preserved as a single token 
-          -->
-        <tokenizer class="solr.KeywordTokenizerFactory"/>
-        <!-- The LowerCase TokenFilter does what you expect, which can be
-            when you want your sorting to be case insensitive
-          -->
-        <filter class="solr.LowerCaseFilterFactory" />
-        <!-- The TrimFilter removes any leading or trailing whitespace -->
-        <filter class="solr.TrimFilterFactory" />
-      </analyzer>
-    </fieldType>
-
-    <!--
-      Note:
-      These should only be used for compatibility with existing indexes (created with older Solr versions)
-      or if "sortMissingFirst" or "sortMissingLast" functionality is needed. Use Trie based fields instead.
-
-      Plain numeric field types that store and index the text
-      value verbatim (and hence don't support range queries, since the
-      lexicographic ordering isn't equal to the numeric ordering)
-    -->
-    <fieldType name="pint" class="solr.IntField" omitNorms="true"/>
-    <fieldType name="plong" class="solr.LongField" omitNorms="true"/>
-    <fieldType name="pfloat" class="solr.FloatField" omitNorms="true"/>
-    <fieldType name="pdouble" class="solr.DoubleField" omitNorms="true"/>
-    <fieldType name="pdate" class="solr.DateField" sortMissingLast="true" omitNorms="true"/>
-
-
-    <!--
-      Note:
-      These should only be used for compatibility with existing indexes (created with older Solr versions)
-      or if "sortMissingFirst" or "sortMissingLast" functionality is needed. Use Trie based fields instead.
-
-      Numeric field types that manipulate the value into
-      a string value that isn't human-readable in its internal form,
-      but with a lexicographic ordering the same as the numeric ordering,
-      so that range queries work correctly.
-    -->
-    <fieldType name="sint" class="solr.SortableIntField" sortMissingLast="true" omitNorms="true"/>
-    <fieldType name="slong" class="solr.SortableLongField" sortMissingLast="true" omitNorms="true"/>
-    <fieldType name="sfloat" class="solr.SortableFloatField" sortMissingLast="true" omitNorms="true"/>
-    <fieldType name="sdouble" class="solr.SortableDoubleField" sortMissingLast="true" omitNorms="true"/>
-
-
-    <!-- The "RandomSortField" is not used to store or search any
-         data.  You can declare fields of this type it in your schema
-         to generate pseudo-random orderings of your docs for sorting 
-         purposes.  The ordering is generated based on the field name 
-         and the version of the index, As long as the index version
-         remains unchanged, and the same field name is reused,
-         the ordering of the docs will be consistent.  
-         If you want different psuedo-random orderings of documents,
-         for the same version of the index, use a dynamicField and
-         change the name
-     -->
-    <fieldType name="random" class="solr.RandomSortField" indexed="true" />
-
-    <!-- solr.TextField allows the specification of custom text analyzers
-         specified as a tokenizer and a list of token filters. Different
-         analyzers may be specified for indexing and querying.
-
-         The optional positionIncrementGap puts space between multiple fields of
-         this type on the same document, with the purpose of preventing false phrase
-         matching across fields.
-
-         For more info on customizing your analyzer chain, please see
-         http://wiki.apache.org/solr/AnalyzersTokenizersTokenFilters
-     -->
-
-    <!-- One can also specify an existing Analyzer class that has a
-         default constructor via the class attribute on the analyzer element
-    <fieldType name="text_greek" class="solr.TextField">
-      <analyzer class="org.apache.lucene.analysis.el.GreekAnalyzer"/>
-    </fieldType>
-    -->
-
-    <!-- A text field that only splits on whitespace for exact matching of words -->
-    <fieldType name="text_ws" class="solr.TextField" positionIncrementGap="100">
-      <analyzer>
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-      </analyzer>
-    </fieldType>
-
-    <!-- A text field that uses WordDelimiterFilter to enable splitting and matching of
-        words on case-change, alpha numeric boundaries, and non-alphanumeric chars,
-        so that a query of "wifi" or "wi fi" could match a document containing "Wi-Fi".
-        Synonyms and stopwords are customized by external files, and stemming is enabled.
-        -->
-    <fieldType name="text" class="solr.TextField" positionIncrementGap="100">
-      <analyzer type="index">
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <!-- in this example, we will only use synonyms at query time
-        <filter class="solr.SynonymFilterFactory" synonyms="index_synonyms.txt" ignoreCase="true" expand="false"/>
-        -->
-        <!-- Case insensitive stop word removal.
-          add enablePositionIncrements=true in both the index and query
-          analyzers to leave a 'gap' for more accurate phrase queries.
-        -->
-        <filter class="solr.StopFilterFactory"
-                ignoreCase="true"
-                words="stopwords.txt"
-                enablePositionIncrements="true"
-                />
-        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="1" catenateNumbers="1" catenateAll="0" splitOnCaseChange="1"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.SnowballPorterFilterFactory" language="English" protected="protwords.txt"/>
-      </analyzer>
-      <analyzer type="query">
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
-        <filter class="solr.StopFilterFactory"
-                ignoreCase="true"
-                words="stopwords.txt"
-                enablePositionIncrements="true"
-                />
-        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="0" catenateNumbers="0" catenateAll="0" splitOnCaseChange="1"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.SnowballPorterFilterFactory" language="English" protected="protwords.txt"/>
-      </analyzer>
-    </fieldType>
-
-
-    <!-- Less flexible matching, but less false matches.  Probably not ideal for product names,
-         but may be good for SKUs.  Can insert dashes in the wrong place and still match. -->
-    <fieldType name="textTight" class="solr.TextField" positionIncrementGap="100" >
-      <analyzer>
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="false"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt"/>
-        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="0" generateNumberParts="0" catenateWords="1" catenateNumbers="1" catenateAll="0"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.SnowballPorterFilterFactory" language="English" protected="protwords.txt"/>
-        <!-- this filter can remove any duplicate tokens that appear at the same position - sometimes
-             possible with WordDelimiterFilter in conjuncton with stemming. -->
-        <filter class="solr.RemoveDuplicatesTokenFilterFactory"/>
-      </analyzer>
-    </fieldType>
-
-
-    <!-- A general unstemmed text field - good if one does not know the language of the field -->
-    <fieldType name="textgen" class="solr.TextField" positionIncrementGap="100">
-      <analyzer type="index">
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" enablePositionIncrements="true" />
-        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="1" catenateNumbers="1" catenateAll="0" splitOnCaseChange="0"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-      </analyzer>
-      <analyzer type="query">
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
-        <filter class="solr.StopFilterFactory"
-                ignoreCase="true"
-                words="stopwords.txt"
-                enablePositionIncrements="true"
-                />
-        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="0" catenateNumbers="0" catenateAll="0" splitOnCaseChange="0"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-      </analyzer>
-    </fieldType>
-
-
-    <!-- A general unstemmed text field that indexes tokens normally and also
-         reversed (via ReversedWildcardFilterFactory), to enable more efficient 
-        leading wildcard queries. -->
-    <fieldType name="text_rev" class="solr.TextField" positionIncrementGap="100">
-      <analyzer type="index">
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" enablePositionIncrements="true" />
-        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="1" catenateNumbers="1" catenateAll="0" splitOnCaseChange="0"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.ReversedWildcardFilterFactory" withOriginal="true"
-           maxPosAsterisk="3" maxPosQuestion="2" maxFractionAsterisk="0.33"/>
-      </analyzer>
-      <analyzer type="query">
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
-        <filter class="solr.StopFilterFactory"
-                ignoreCase="true"
-                words="stopwords.txt"
-                enablePositionIncrements="true"
-                />
-        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="0" catenateNumbers="0" catenateAll="0" splitOnCaseChange="0"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-      </analyzer>
-    </fieldType>
-
-    <!-- charFilter + WhitespaceTokenizer  -->
-    <!--
-    <fieldType name="textCharNorm" class="solr.TextField" positionIncrementGap="100" >
-      <analyzer>
-        <charFilter class="solr.MappingCharFilterFactory" mapping="mapping-ISOLatin1Accent.txt"/>
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-      </analyzer>
-    </fieldType>
-    -->
-
-    <!-- This is an example of using the KeywordTokenizer along
-         With various TokenFilterFactories to produce a sortable field
-         that does not include some properties of the source text
-      -->
-    <fieldType name="alphaOnlySort" class="solr.TextField" sortMissingLast="true" omitNorms="true">
-      <analyzer>
-        <!-- KeywordTokenizer does no actual tokenizing, so the entire
-             input string is preserved as a single token
-          -->
-        <tokenizer class="solr.KeywordTokenizerFactory"/>
-        <!-- The LowerCase TokenFilter does what you expect, which can be
-             when you want your sorting to be case insensitive
-          -->
-        <filter class="solr.LowerCaseFilterFactory" />
-        <!-- The TrimFilter removes any leading or trailing whitespace -->
-        <filter class="solr.TrimFilterFactory" />
-        <!-- The PatternReplaceFilter gives you the flexibility to use
-             Java Regular expression to replace any sequence of characters
-             matching a pattern with an arbitrary replacement string, 
-             which may include back references to portions of the original
-             string matched by the pattern.
-             
-             See the Java Regular Expression documentation for more
-             information on pattern and replacement string syntax.
-             
-             http://java.sun.com/j2se/1.5.0/docs/api/java/util/regex/package-summary.html
-          -->
-        <filter class="solr.PatternReplaceFilterFactory"
-                pattern="([^a-z])" replacement="" replace="all"
-        />
-      </analyzer>
-    </fieldType>
-    
-    <fieldtype name="phonetic" stored="false" indexed="true" class="solr.TextField" >
-      <analyzer>
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.DoubleMetaphoneFilterFactory" inject="false"/>
-      </analyzer>
-    </fieldtype>
-
-    <fieldtype name="payloads" stored="false" indexed="true" class="solr.TextField" >
-      <analyzer>
-        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
-        <!--
-        The DelimitedPayloadTokenFilter can put payloads on tokens... for example,
-        a token of "foo|1.4"  would be indexed as "foo" with a payload of 1.4f
-        Attributes of the DelimitedPayloadTokenFilterFactory : 
-         "delimiter" - a one character delimiter. Default is | (pipe)
-        "encoder" - how to encode the following value into a playload
-           float -> org.apache.lucene.analysis.payloads.FloatEncoder,
-           integer -> o.a.l.a.p.IntegerEncoder
-           identity -> o.a.l.a.p.IdentityEncoder
-            Fully Qualified class name implementing PayloadEncoder, Encoder must have a no arg constructor.
-         -->
-        <filter class="solr.DelimitedPayloadTokenFilterFactory" encoder="float"/>
-      </analyzer>
-    </fieldtype>
-
-    <!-- lowercases the entire field value, keeping it as a single token.  -->
-    <fieldType name="lowercase" class="solr.TextField" positionIncrementGap="100">
-      <analyzer>
-        <tokenizer class="solr.KeywordTokenizerFactory"/>
-        <filter class="solr.LowerCaseFilterFactory" />
-      </analyzer>
-    </fieldType>
-
-
-    <!-- since fields of this type are by default not stored or indexed,
-         any data added to them will be ignored outright.  --> 
-    <fieldtype name="ignored" stored="false" indexed="false" multiValued="true" class="solr.StrField" /> 
-
-    <!-- subject -->
-    <fieldType name="subject" class="solr.StrField" positionIncrementGap="100">
-<!--
-      <analyzer>
-        <tokenizer class="solr.PatternTokenizerFactory" pattern=";" />
-        <filter class="solr.StandardFilterFactory" />
-        <filter class="solr.TrimFilterFactory" />
-      </analyzer>
--->
-    </fieldType>
-
-    <!-- Author type  -->
-    <fieldType name="author" class="solr.TextField" positionIncrementGap="100">
-      <analyzer>
-        <tokenizer class="solr.PatternTokenizerFactory" pattern=";" />
-        <filter class="solr.StandardFilterFactory" />
-        <filter class="solr.TrimFilterFactory" />
-<!--
-        <filter class="solr.SnowballPorterFilterFactory" language="English" protected="protwords.txt"/>
--->
-      </analyzer>
-    </fieldType>
-
-
- </types>
-
-
- <fields>
-   <!-- Valid attributes for fields:
-     name: mandatory - the name for the field
-     type: mandatory - the name of a previously defined type from the 
-       <types> section
-     indexed: true if this field should be indexed (searchable or sortable)
-     stored: true if this field should be retrievable
-     compressed: [false] if this field should be stored using gzip compression
-       (this will only apply if the field type is compressable; among
-       the standard field types, only TextField and StrField are)
-     multiValued: true if this field may contain multiple values per document
-     omitNorms: (expert) set to true to omit the norms associated with
-       this field (this disables length normalization and index-time
-       boosting for the field, and saves some memory).  Only full-text
-       fields or fields that need an index-time boost need norms.
-     termVectors: [false] set to true to store the term vector for a
-       given field.
-       When using MoreLikeThis, fields used for similarity should be
-       stored for best performance.
-     termPositions: Store position information with the term vector.  
-       This will increase storage costs.
-     termOffsets: Store offset information with the term vector. This 
-       will increase storage costs.
-     default: a value that should be used if no value is specified
-       when adding a document.
-   -->
-
-<!-- -->
-   <field name="id" type="string" indexed="true" stored="true" required="true" /> 
-   <field name="_version_" type="long" indexed="true" stored="true"/>
-
-   <field name="transactionId" type="long" indexed="true" stored="false"/>
-
-   <field name="author"       type="text"   indexed="true" stored="true"  multiValued="true" omitNorms="true"/>
-   <field name="author_exact" type="string" indexed="true" stored="false" multiValued="true" omitNorms="true" docValues="true" />
-   <field name="author-date"  type="text"   indexed="true" stored="true"  multiValued="true" omitNorms="true"/>
-   <field name="author-title" type="text"   indexed="true" stored="true"  multiValued="true" omitNorms="true"/>
-
-   <field name="corporate-date"     type="text" indexed="true" stored="true" omitNorms="true"/>
-   <field name="corporate-location" type="text" indexed="true" stored="true" omitNorms="true"/>
-   <field name="corporate-name"     type="text" indexed="true" stored="true" omitNorms="true"/>
-
-   <field name="callnumber" type="text" indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-   <field name="citation"   type="text" indexed="true" stored="true" multiValued="true"  omitNorms="true"/>
-
-   <field name="date"        type="text"    indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-   <field name="description" type="text_ws" indexed="true" stored="true" multiValued="true"  omitNorms="true"/>
-
-   <field name="edition" type="text" indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-
-   <field name="electronic-format-instruction" type="text" indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-   <field name="electronic-format-type"        type="text" indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-   <field name="electronic-note"               type="text" indexed="true" stored="true" multiValued="true"  omitNorms="true"/>
-   <field name="electronic-text"               type="text" indexed="true" stored="true" multiValued="true"  omitNorms="true"/>
-   <field name="electronic-url"                type="text" indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-
-   <field name="isbn" type="text" indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-   <field name="issn" type="text" indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-   <field name="lccn" type="text" indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-
-   <field name="medium"       type="text"  indexed="true" stored="true"  multiValued="true" omitNorms="true"/>
-   <field name="medium_exact" type="facet" indexed="true" stored="false" multiValued="true" omitNorms="true" />
-
-   <field name="meeting-date"     type="text" indexed="true" stored="true" omitNorms="true"/>
-   <field name="meeting-location" type="text" indexed="true" stored="true" omitNorms="true"/>
-   <field name="meeting-name"     type="text" indexed="true" stored="true" omitNorms="true"/>
-
-   <field name="series-title" type="text" indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-
-   <field name="subject"       type="text_ws" indexed="true" stored="true"  multiValued="true" omitNorms="true" />
-   <field name="subject_exact" type="string"  indexed="true" stored="false" multiValued="true" omitNorms="true" docValues="true" />
-   <field name="subject-long"  type="text_ws" indexed="true" stored="true"  multiValued="true" omitNorms="true" />
-
-   <field name="system-control-nr" type="text" indexed="true" stored="true" multiValued="true" omitNorms="true"/>
-
-   <field name="tech-rep-nr" type="text" indexed="true" multiValued="true" stored="true"/>
-
-   <field name="title"                  type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-complete"         type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-dates"            type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-medium"           type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-number-section"   type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-remainder"        type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-responsibility"   type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-uniform"          type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-uniform-key"      type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-uniform-media"    type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-uniform-partname" type="text"   indexed="true" multiValued="true" stored="true"/>
-   <field name="title-uniform-parts"    type="text"   indexed="true" multiValued="true" stored="true"/>
-
-   <field name="journal-title"          type="text" indexed="true" multiValued="true"  stored="true" />
-   <field name="journal-title_exact"    type="text" indexed="true" multiValued="true"  stored="false"/>
-
-   <field name="physical-accomp"     type="text" indexed="true" stored="true" multiValued="true" />
-   <field name="physical-dimensions" type="text" indexed="true" stored="true" multiValued="true" />
-   <field name="physical-extent"     type="text" indexed="true" stored="true" multiValued="true" />
-   <field name="physical-format"     type="text" indexed="true" stored="true" multiValued="true" />
-   <field name="physical-specified"  type="text" indexed="true" stored="true" multiValued="true" />
-   <field name="physical-unitsize"   type="text" indexed="true" stored="true" multiValued="true" />
-   <field name="physical-unittype"   type="text" indexed="true" stored="true" multiValued="true" />
-
-   <field name="publication-date"  type="text" indexed="true" stored="true" multiValued="true" />
-   <field name="publication-name"  type="text" indexed="true" stored="true" multiValued="true" />
-   <field name="publication-place" type="text" indexed="true" stored="true" multiValued="true" />
-
-
-   <!-- Common metadata fields, named specifically to match up with
-     SolrCell metadata when parsing rich documents such as Word, PDF.
-     Some fields are multiValued only because Tika currently may return
-     multiple values for them.
-   -->
-<!--
-   <field name="title" type="text" indexed="true" stored="true" multiValued="true"/>
-   <field name="subject" type="text" indexed="true" stored="true"/>
-   <field name="description" type="text" indexed="true" stored="true" multiValued="true"/>
-   <field name="comments" type="text" indexed="true" stored="true"/>
-   <field name="author" type="textgen" indexed="true" stored="true"/>
-   <field name="keywords" type="textgen" indexed="true" stored="true"/>
-   <field name="category" type="textgen" indexed="true" stored="true"/>
-   <field name="content_type" type="string" indexed="true" stored="true" multiValued="true"/>
-   <field name="links" type="string" indexed="true" stored="true" multiValued="true"/>
--->
-   <field name="harvest-timestamp" type="date"   indexed="true" stored="true"/>
-   <field name="harvest-date"      type="string" indexed="true" stored="true"/>
-
-   <!-- catchall field, containing all other searchable text fields (implemented
-        via copyField further on in this schema  -->
-   <field name="text" type="text" indexed="true" stored="false" multiValued="true"/>
-
-   <!-- catchall text field that indexes tokens both normally and in reverse for efficient
-        leading wildcard queries. -->
-   <field name="text_rev" type="text_rev" indexed="true" stored="false" multiValued="true"/>
-
-   <field name="payloads" type="payloads" indexed="true" stored="true"/>
-
-   <!-- Uncommenting the following will create a "timestamp" field using
-        a default value of "NOW" to indicate when each document was indexed.
-     -->
-   <!--
-   <field name="timestamp" type="date" indexed="true" stored="true" default="NOW" multiValued="false"/>
-     -->
-   
-
-   <!-- Dynamic field definitions.  If a field name is not found, dynamicFields
-        will be used if the name matches any of the patterns.
-        RESTRICTION: the glob-like pattern in the name attribute must have
-        a "*" only at the start or the end.
-        EXAMPLE:  name="*_i" will match any field ending in _i (like myid_i, z_i)
-        Longer patterns will be matched first.  if equal size patterns
-        both match, the first appearing in the schema will be used.  -->
-   <dynamicField name="*_i"  type="int"    indexed="true"  stored="true"/>
-   <dynamicField name="*_s"  type="string"  indexed="true"  stored="true"/>
-   <dynamicField name="*_l"  type="long"   indexed="true"  stored="true"/>
-   <dynamicField name="*_t"  type="text"    indexed="true"  stored="true"/>
-   <dynamicField name="*_b"  type="boolean" indexed="true"  stored="true"/>
-   <dynamicField name="*_f"  type="float"  indexed="true"  stored="true"/>
-   <dynamicField name="*_d"  type="double" indexed="true"  stored="true"/>
-   <dynamicField name="*_dt" type="date"    indexed="true"  stored="true"/>
-
-   <!-- some trie-coded dynamic fields for faster range queries -->
-   <dynamicField name="*_ti" type="tint"    indexed="true"  stored="true"/>
-   <dynamicField name="*_tl" type="tlong"   indexed="true"  stored="true"/>
-   <dynamicField name="*_tf" type="tfloat"  indexed="true"  stored="true"/>
-   <dynamicField name="*_td" type="tdouble" indexed="true"  stored="true"/>
-   <dynamicField name="*_tdt" type="tdate"  indexed="true"  stored="true"/>
-
-   <dynamicField name="*_pi"  type="pint"    indexed="true"  stored="true"/>
-
-   <dynamicField name="ignored_*" type="ignored" multiValued="true"/>
-   <dynamicField name="attr_*" type="textgen" indexed="true" stored="true" multiValued="true"/>
-
-   <dynamicField name="random_*" type="random" />
-
-   <!-- uncomment the following to ignore any fields that don't already match an existing 
-        field name or dynamic field, rather than reporting them as an error. 
-        alternately, change the type="ignored" to some other type e.g. "text" if you want 
-        unknown fields indexed and/or stored by default --> 
-   <dynamicField name="*" type="text" multiValued="true" />
-   
- </fields>
-
- <!-- Field to use to determine and enforce document uniqueness. 
-      Unless this field is marked with required="false", it will be a required field
-   -->
- <uniqueKey>id</uniqueKey>
-
- <!-- field for the QueryParser to use when an explicit fieldname is absent -->
- <defaultSearchField>text</defaultSearchField>
-
- <!-- SolrQueryParser configuration: defaultOperator="AND|OR" -->
- <solrQueryParser defaultOperator="AND"/>
-
-  <!-- copyField commands copy one field to another at the time a document
-        is added to the index.  It's used either to index the same field differently,
-        or to add multiple fields to the same field for easier/faster searching.  -->
-
-   <copyField source="author"  dest="author_exact"/>
-   <copyField source="subject" dest="subject_exact"/>
-   <copyField source="medium"  dest="medium_exact"/>
-   <copyField source="journal-title"   dest="journal-title_exact"/>
-       
-   <!-- Above, multiple source fields are copied to the [text] field. 
-         Another way to map multiple source fields to the same 
-         destination field is to use the dynamic field syntax. 
-         copyField also supports a maxChars to copy setting.  -->
-          
-   <copyField source="*" dest="text"/> 
-
-   <!-- copy name to alphaNameSort, a field designed for sorting by name -->
-   <!-- <copyField source="name" dest="alphaNameSort"/> -->
- 
-
- <!-- Similarity is the scoring routine for each document vs. a query.
-      A custom similarity may be specified here, but the default is fine
-      for most applications.  -->
- <!-- <similarity class="org.apache.lucene.search.DefaultSimilarity"/> -->
- <!-- ... OR ...
-      Specify a SimilarityFactory class name implementation
-      allowing parameters to be used.
- -->
- <!--
- <similarity class="com.example.solr.CustomSimilarityFactory">
-   <str name="paramkey">param value</str>
- </similarity>
- -->
-</schema>

diff --git a/zookeeper/solr/collection1/conf/scripts.conf b/zookeeper/solr/collection1/conf/scripts.conf
deleted file mode 100644 (file)
index f58b262..0000000
--- a/zookeeper/solr/collection1/conf/scripts.conf
+++ /dev/null
@@ -1,24 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-user=
-solr_hostname=localhost
-solr_port=8983
-rsyncd_port=18983
-data_dir=
-webapp_name=solr
-master_host=
-master_data_dir=
-master_status_dir=

diff --git a/zookeeper/solr/collection1/conf/solrconfig.xml b/zookeeper/solr/collection1/conf/solrconfig.xml
deleted file mode 100644 (file)
index 3dfc0c3..0000000
--- a/zookeeper/solr/collection1/conf/solrconfig.xml
+++ /dev/null
@@ -1,1838 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- 
-     For more details about configurations options that may appear in
-     this file, see http://wiki.apache.org/solr/SolrConfigXml. 
--->
-<config>
-  <!-- In all configuration below, a prefix of "solr." for class names
-       is an alias that causes solr to search appropriate packages,
-       including org.apache.solr.(search|update|request|core|analysis)
-
-       You may also specify a fully qualified Java classname if you
-       have your own custom plugins.
-    -->
-
-  <!-- Controls what version of Lucene various components of Solr
-       adhere to.  Generally, you want to use the latest version to
-       get all bug fixes and improvements. It is highly recommended
-       that you fully re-index after changing this setting as it can
-       affect both how text is indexed and queried.
-  -->
-  <luceneMatchVersion>4.4</luceneMatchVersion>
-
-  <!-- <lib/> directives can be used to instruct Solr to load an Jars
-       identified and use them to resolve any "plugins" specified in
-       your solrconfig.xml or schema.xml (ie: Analyzers, Request
-       Handlers, etc...).
-
-       All directories and paths are resolved relative to the
-       instanceDir.
-
-       Please note that <lib/> directives are processed in the order
-       that they appear in your solrconfig.xml file, and are "stacked" 
-       on top of each other when building a ClassLoader - so if you have 
-       plugin jars with dependencies on other jars, the "lower level" 
-       dependency jars should be loaded first.
-
-       If a "./lib" directory exists in your instanceDir, all files
-       found in it are included as if you had used the following
-       syntax...
-       
-              <lib dir="./lib" />
-    -->
-
-  <!-- A 'dir' option by itself adds any files found in the directory 
-       to the classpath, this is useful for including all jars in a
-       directory.
-
-       When a 'regex' is specified in addition to a 'dir', only the
-       files in that directory which completely match the regex
-       (anchored on both ends) will be included.
-
-       If a 'dir' option (with or without a regex) is used and nothing
-       is found that matches, a warning will be logged.
-
-       The examples below can be used to load some solr-contribs along 
-       with their external dependencies.
-    -->
-<!--
-  <lib dir="../../../contrib/extraction/lib" regex=".*\.jar" />
-  <lib dir="../../../dist/" regex="solr-cell-\d.*\.jar" />
-
-  <lib dir="../../../contrib/clustering/lib/" regex=".*\.jar" />
-  <lib dir="../../../dist/" regex="solr-clustering-\d.*\.jar" />
-
-  <lib dir="../../../contrib/langid/lib/" regex=".*\.jar" />
-  <lib dir="../../../dist/" regex="solr-langid-\d.*\.jar" />
-
-  <lib dir="../../../contrib/velocity/lib" regex=".*\.jar" />
-  <lib dir="../../../dist/" regex="solr-velocity-\d.*\.jar" />
--->
-  <!-- an exact 'path' can be used instead of a 'dir' to specify a 
-       specific jar file.  This will cause a serious error to be logged 
-       if it can't be loaded.
-    -->
-  <!--
-     <lib path="../a-jar-that-does-not-exist.jar" /> 
-  -->
-  
-  <!-- Data Directory
-
-       Used to specify an alternate directory to hold all index data
-       other than the default ./data under the Solr home.  If
-       replication is in use, this should match the replication
-       configuration.
-    -->
-  <dataDir>${solr.data.dir:}</dataDir>
-
-
-  <!-- The DirectoryFactory to use for indexes.
-       
-       solr.StandardDirectoryFactory is filesystem
-       based and tries to pick the best implementation for the current
-       JVM and platform.  solr.NRTCachingDirectoryFactory, the default,
-       wraps solr.StandardDirectoryFactory and caches small files in memory
-       for better NRT performance.
-
-       One can force a particular implementation via solr.MMapDirectoryFactory,
-       solr.NIOFSDirectoryFactory, or solr.SimpleFSDirectoryFactory.
-
-       solr.RAMDirectoryFactory is memory based, not
-       persistent, and doesn't work with replication.
-    -->
-  <directoryFactory name="DirectoryFactory" 
-                    class="${solr.directoryFactory:solr.NRTCachingDirectoryFactory}"/> 
-
-  <!-- The CodecFactory for defining the format of the inverted index.
-       The default implementation is SchemaCodecFactory, which is the official Lucene
-       index format, but hooks into the schema to provide per-field customization of
-       the postings lists and per-document values in the fieldType element
-       (postingsFormat/docValuesFormat). Note that most of the alternative implementations
-       are experimental, so if you choose to customize the index format, its a good
-       idea to convert back to the official format e.g. via IndexWriter.addIndexes(IndexReader)
-       before upgrading to a newer version to avoid unnecessary reindexing.
-  -->
-  <codecFactory class="solr.SchemaCodecFactory"/>
-
-  <!-- To enable dynamic schema REST APIs, use the following for <schemaFactory>:
-  
-       <schemaFactory class="ManagedIndexSchemaFactory">
-         <bool name="mutable">true</bool>
-         <str name="managedSchemaResourceName">managed-schema</str>
-       </schemaFactory>
-       
-       When ManagedIndexSchemaFactory is specified, Solr will load the schema from
-       he resource named in 'managedSchemaResourceName', rather than from schema.xml.
-       Note that the managed schema resource CANNOT be named schema.xml.  If the managed
-       schema does not exist, Solr will create it after reading schema.xml, then rename
-       'schema.xml' to 'schema.xml.bak'. 
-       
-       Do NOT hand edit the managed schema - external modifications will be ignored and
-       overwritten as a result of schema modification REST API calls.
-
-       When ManagedIndexSchemaFactory is specified with mutable = true, schema
-       modification REST API calls will be allowed; otherwise, error responses will be
-       sent back for these requests. 
-  -->
-  <schemaFactory class="ClassicIndexSchemaFactory"/>
-
-  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-       Index Config - These settings control low-level behavior of indexing
-       Most example settings here show the default value, but are commented
-       out, to more easily see where customizations have been made.
-       
-       Note: This replaces <indexDefaults> and <mainIndex> from older versions
-       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
-  <indexConfig>
-    <!-- maxFieldLength was removed in 4.0. To get similar behavior, include a 
-         LimitTokenCountFilterFactory in your fieldType definition. E.g. 
-     <filter class="solr.LimitTokenCountFilterFactory" maxTokenCount="10000"/>
-    -->
-    <!-- Maximum time to wait for a write lock (ms) for an IndexWriter. Default: 1000 -->
-    <!-- <writeLockTimeout>1000</writeLockTimeout>  -->
-
-    <!-- The maximum number of simultaneous threads that may be
-         indexing documents at once in IndexWriter; if more than this
-         many threads arrive they will wait for others to finish.
-         Default in Solr/Lucene is 8. -->
-    <!-- <maxIndexingThreads>8</maxIndexingThreads>  -->
-
-    <!-- Expert: Enabling compound file will use less files for the index, 
-         using fewer file descriptors on the expense of performance decrease. 
-         Default in Lucene is "true". Default in Solr is "false" (since 3.6) -->
-    <!-- <useCompoundFile>false</useCompoundFile> -->
-
-    <!-- ramBufferSizeMB sets the amount of RAM that may be used by Lucene
-         indexing for buffering added documents and deletions before they are
-         flushed to the Directory.
-         maxBufferedDocs sets a limit on the number of documents buffered
-         before flushing.
-         If both ramBufferSizeMB and maxBufferedDocs is set, then
-         Lucene will flush based on whichever limit is hit first.
-         The default is 100 MB.  -->
-    <!-- <ramBufferSizeMB>100</ramBufferSizeMB> -->
-    <!-- <maxBufferedDocs>1000</maxBufferedDocs> -->
-
-    <!-- Expert: Merge Policy 
-         The Merge Policy in Lucene controls how merging of segments is done.
-         The default since Solr/Lucene 3.3 is TieredMergePolicy.
-         The default since Lucene 2.3 was the LogByteSizeMergePolicy,
-         Even older versions of Lucene used LogDocMergePolicy.
-      -->
-    <!--
-        <mergePolicy class="org.apache.lucene.index.TieredMergePolicy">
-          <int name="maxMergeAtOnce">10</int>
-          <int name="segmentsPerTier">10</int>
-        </mergePolicy>
-      -->
-       
-    <!-- Merge Factor
-         The merge factor controls how many segments will get merged at a time.
-         For TieredMergePolicy, mergeFactor is a convenience parameter which
-         will set both MaxMergeAtOnce and SegmentsPerTier at once.
-         For LogByteSizeMergePolicy, mergeFactor decides how many new segments
-         will be allowed before they are merged into one.
-         Default is 10 for both merge policies.
-      -->
-    <!-- 
-    <mergeFactor>10</mergeFactor>
-      -->
-
-    <!-- Expert: Merge Scheduler
-         The Merge Scheduler in Lucene controls how merges are
-         performed.  The ConcurrentMergeScheduler (Lucene 2.3 default)
-         can perform merges in the background using separate threads.
-         The SerialMergeScheduler (Lucene 2.2 default) does not.
-     -->
-    <!-- 
-       <mergeScheduler class="org.apache.lucene.index.ConcurrentMergeScheduler"/>
-       -->
-
-    <!-- LockFactory 
-
-         This option specifies which Lucene LockFactory implementation
-         to use.
-      
-         single = SingleInstanceLockFactory - suggested for a
-                  read-only index or when there is no possibility of
-                  another process trying to modify the index.
-         native = NativeFSLockFactory - uses OS native file locking.
-                  Do not use when multiple solr webapps in the same
-                  JVM are attempting to share a single index.
-         simple = SimpleFSLockFactory  - uses a plain file for locking
-
-         Defaults: 'native' is default for Solr3.6 and later, otherwise
-                   'simple' is the default
-
-         More details on the nuances of each LockFactory...
-         http://wiki.apache.org/lucene-java/AvailableLockFactories
-    -->
-    <lockType>${solr.lock.type:native}</lockType>
-
-    <!-- Unlock On Startup
-
-         If true, unlock any held write or commit locks on startup.
-         This defeats the locking mechanism that allows multiple
-         processes to safely access a lucene index, and should be used
-         with care. Default is "false".
-
-         This is not needed if lock type is 'single'
-     -->
-    <!--
-    <unlockOnStartup>false</unlockOnStartup>
-      -->
-    
-    <!-- Expert: Controls how often Lucene loads terms into memory
-         Default is 128 and is likely good for most everyone.
-      -->
-    <!-- <termIndexInterval>128</termIndexInterval> -->
-
-    <!-- If true, IndexReaders will be reopened (often more efficient)
-         instead of closed and then opened. Default: true
-      -->
-    <!-- 
-    <reopenReaders>true</reopenReaders>
-      -->
-
-    <!-- Commit Deletion Policy
-         Custom deletion policies can be specified here. The class must
-         implement org.apache.lucene.index.IndexDeletionPolicy.
-
-         The default Solr IndexDeletionPolicy implementation supports
-         deleting index commit points on number of commits, age of
-         commit point and optimized status.
-         
-         The latest commit point should always be preserved regardless
-         of the criteria.
-    -->
-    <!-- 
-    <deletionPolicy class="solr.SolrDeletionPolicy">
-    -->
-      <!-- The number of commit points to be kept -->
-      <!-- <str name="maxCommitsToKeep">1</str> -->
-      <!-- The number of optimized commit points to be kept -->
-      <!-- <str name="maxOptimizedCommitsToKeep">0</str> -->
-      <!--
-          Delete all commit points once they have reached the given age.
-          Supports DateMathParser syntax e.g.
-        -->
-      <!--
-         <str name="maxCommitAge">30MINUTES</str>
-         <str name="maxCommitAge">1DAY</str>
-      -->
-    <!-- 
-    </deletionPolicy>
-    -->
-
-    <!-- Lucene Infostream
-       
-         To aid in advanced debugging, Lucene provides an "InfoStream"
-         of detailed information when indexing.
-
-         Setting the value to true will instruct the underlying Lucene
-         IndexWriter to write its info stream to solr's log. By default,
-         this is enabled here, and controlled through log4j.properties.
-      -->
-     <infoStream>true</infoStream>
-  </indexConfig>
-
-
-  <!-- JMX
-       
-       This example enables JMX if and only if an existing MBeanServer
-       is found, use this if you want to configure JMX through JVM
-       parameters. Remove this to disable exposing Solr configuration
-       and statistics to JMX.
-
-       For more details see http://wiki.apache.org/solr/SolrJmx
-    -->
-  <jmx />
-  <!-- If you want to connect to a particular server, specify the
-       agentId 
-    -->
-  <!-- <jmx agentId="myAgent" /> -->
-  <!-- If you want to start a new MBeanServer, specify the serviceUrl -->
-  <!-- <jmx serviceUrl="service:jmx:rmi:///jndi/rmi://localhost:9999/solr"/>
-    -->
-
-  <!-- The default high-performance update handler -->
-  <updateHandler class="solr.DirectUpdateHandler2">
-
-    <!-- Enables a transaction log, used for real-time get, durability, and
-         and solr cloud replica recovery.  The log can grow as big as
-         uncommitted changes to the index, so use of a hard autoCommit
-         is recommended (see below).
-         "dir" - the target directory for transaction logs, defaults to the
-                solr data directory.  --> 
-    <updateLog>
-      <str name="dir">${solr.ulog.dir:}</str>
-    </updateLog>
- 
-    <!-- AutoCommit
-
-         Perform a hard commit automatically under certain conditions.
-         Instead of enabling autoCommit, consider using "commitWithin"
-         when adding documents. 
-
-         http://wiki.apache.org/solr/UpdateXmlMessages
-
-         maxDocs - Maximum number of documents to add since the last
-                   commit before automatically triggering a new commit.
-
-         maxTime - Maximum amount of time in ms that is allowed to pass
-                   since a document was added before automatically
-                   triggering a new commit. 
-         openSearcher - if false, the commit causes recent index changes
-           to be flushed to stable storage, but does not cause a new
-           searcher to be opened to make those changes visible.
-
-         If the updateLog is enabled, then it's highly recommended to
-         have some sort of hard autoCommit to limit the log size.
-      -->
-     <autoCommit> 
-       <maxTime>${solr.autoCommit.maxTime:15000}</maxTime> 
-       <openSearcher>false</openSearcher> 
-     </autoCommit>
-
-    <!-- softAutoCommit is like autoCommit except it causes a
-         'soft' commit which only ensures that changes are visible
-         but does not ensure that data is synced to disk.  This is
-         faster and more near-realtime friendly than a hard commit.
-      -->
-
-     <autoSoftCommit> 
-       <maxTime>${solr.autoSoftCommit.maxTime:-1}</maxTime> 
-     </autoSoftCommit>
-
-    <!-- Update Related Event Listeners
-         
-         Various IndexWriter related events can trigger Listeners to
-         take actions.
-
-         postCommit - fired after every commit or optimize command
-         postOptimize - fired after every optimize command
-      -->
-    <!-- The RunExecutableListener executes an external command from a
-         hook such as postCommit or postOptimize.
-         
-         exe - the name of the executable to run
-         dir - dir to use as the current working directory. (default=".")
-         wait - the calling thread waits until the executable returns. 
-                (default="true")
-         args - the arguments to pass to the program.  (default is none)
-         env - environment variables to set.  (default is none)
-      -->
-    <!-- This example shows how RunExecutableListener could be used
-         with the script based replication...
-         http://wiki.apache.org/solr/CollectionDistribution
-      -->
-    <!--
-       <listener event="postCommit" class="solr.RunExecutableListener">
-         <str name="exe">solr/bin/snapshooter</str>
-         <str name="dir">.</str>
-         <bool name="wait">true</bool>
-         <arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
-         <arr name="env"> <str>MYVAR=val1</str> </arr>
-       </listener>
-      -->
-
-  </updateHandler>
-  
-  <!-- IndexReaderFactory
-
-       Use the following format to specify a custom IndexReaderFactory,
-       which allows for alternate IndexReader implementations.
-
-       ** Experimental Feature **
-
-       Please note - Using a custom IndexReaderFactory may prevent
-       certain other features from working. The API to
-       IndexReaderFactory may change without warning or may even be
-       removed from future releases if the problems cannot be
-       resolved.
-
-
-       ** Features that may not work with custom IndexReaderFactory **
-
-       The ReplicationHandler assumes a disk-resident index. Using a
-       custom IndexReader implementation may cause incompatibility
-       with ReplicationHandler and may cause replication to not work
-       correctly. See SOLR-1366 for details.
-
-    -->
-  <!--
-  <indexReaderFactory name="IndexReaderFactory" class="package.class">
-    <str name="someArg">Some Value</str>
-  </indexReaderFactory >
-  -->
-  <!-- By explicitly declaring the Factory, the termIndexDivisor can
-       be specified.
-    -->
-  <!--
-     <indexReaderFactory name="IndexReaderFactory" 
-                         class="solr.StandardIndexReaderFactory">
-       <int name="setTermIndexDivisor">12</int>
-     </indexReaderFactory >
-    -->
-
-  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-       Query section - these settings control query time things like caches
-       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
-  <query>
-    <!-- Max Boolean Clauses
-
-         Maximum number of clauses in each BooleanQuery,  an exception
-         is thrown if exceeded.
-
-         ** WARNING **
-         
-         This option actually modifies a global Lucene property that
-         will affect all SolrCores.  If multiple solrconfig.xml files
-         disagree on this property, the value at any given moment will
-         be based on the last SolrCore to be initialized.
-         
-      -->
-    <maxBooleanClauses>1024</maxBooleanClauses>
-
-
-    <!-- Solr Internal Query Caches
-
-         There are two implementations of cache available for Solr,
-         LRUCache, based on a synchronized LinkedHashMap, and
-         FastLRUCache, based on a ConcurrentHashMap.  
-
-         FastLRUCache has faster gets and slower puts in single
-         threaded operation and thus is generally faster than LRUCache
-         when the hit ratio of the cache is high (> 75%), and may be
-         faster under other scenarios on multi-cpu systems.
-    -->
-
-    <!-- Filter Cache
-
-         Cache used by SolrIndexSearcher for filters (DocSets),
-         unordered sets of *all* documents that match a query.  When a
-         new searcher is opened, its caches may be prepopulated or
-         "autowarmed" using data from caches in the old searcher.
-         autowarmCount is the number of items to prepopulate.  For
-         LRUCache, the autowarmed items will be the most recently
-         accessed items.
-
-         Parameters:
-           class - the SolrCache implementation LRUCache or
-               (LRUCache or FastLRUCache)
-           size - the maximum number of entries in the cache
-           initialSize - the initial capacity (number of entries) of
-               the cache.  (see java.util.HashMap)
-           autowarmCount - the number of entries to prepopulate from
-               and old cache.  
-      -->
-    <filterCache class="solr.FastLRUCache"
-                 size="512"
-                 initialSize="512"
-                 autowarmCount="0"/>
-
-    <!-- Query Result Cache
-         
-         Caches results of searches - ordered lists of document ids
-         (DocList) based on a query, a sort, and the range of documents requested.  
-      -->
-    <queryResultCache class="solr.LRUCache"
-                     size="512"
-                     initialSize="512"
-                     autowarmCount="0"/>
-   
-    <!-- Document Cache
-
-         Caches Lucene Document objects (the stored fields for each
-         document).  Since Lucene internal document ids are transient,
-         this cache will not be autowarmed.  
-      -->
-    <documentCache class="solr.LRUCache"
-                   size="512"
-                   initialSize="512"
-                   autowarmCount="0"/>
-    
-    <!-- Field Value Cache
-         
-         Cache used to hold field values that are quickly accessible
-         by document id.  The fieldValueCache is created by default
-         even if not configured here.
-      -->
-    <!--
-       <fieldValueCache class="solr.FastLRUCache"
-                        size="512"
-                        autowarmCount="128"
-                        showItems="32" />
-      -->
-
-    <!-- Custom Cache
-
-         Example of a generic cache.  These caches may be accessed by
-         name through SolrIndexSearcher.getCache(),cacheLookup(), and
-         cacheInsert().  The purpose is to enable easy caching of
-         user/application level data.  The regenerator argument should
-         be specified as an implementation of solr.CacheRegenerator 
-         if autowarming is desired.  
-      -->
-    <!--
-       <cache name="myUserCache"
-              class="solr.LRUCache"
-              size="4096"
-              initialSize="1024"
-              autowarmCount="1024"
-              regenerator="com.mycompany.MyRegenerator"
-              />
-      -->
-
-
-    <!-- Lazy Field Loading
-
-         If true, stored fields that are not requested will be loaded
-         lazily.  This can result in a significant speed improvement
-         if the usual case is to not load all stored fields,
-         especially if the skipped fields are large compressed text
-         fields.
-    -->
-    <enableLazyFieldLoading>true</enableLazyFieldLoading>
-
-   <!-- Use Filter For Sorted Query
-
-        A possible optimization that attempts to use a filter to
-        satisfy a search.  If the requested sort does not include
-        score, then the filterCache will be checked for a filter
-        matching the query. If found, the filter will be used as the
-        source of document ids, and then the sort will be applied to
-        that.
-
-        For most situations, this will not be useful unless you
-        frequently get the same search repeatedly with different sort
-        options, and none of them ever use "score"
-     -->
-   <!--
-      <useFilterForSortedQuery>true</useFilterForSortedQuery>
-     -->
-
-   <!-- Result Window Size
-
-        An optimization for use with the queryResultCache.  When a search
-        is requested, a superset of the requested number of document ids
-        are collected.  For example, if a search for a particular query
-        requests matching documents 10 through 19, and queryWindowSize is 50,
-        then documents 0 through 49 will be collected and cached.  Any further
-        requests in that range can be satisfied via the cache.  
-     -->
-   <queryResultWindowSize>20</queryResultWindowSize>
-
-   <!-- Maximum number of documents to cache for any entry in the
-        queryResultCache. 
-     -->
-   <queryResultMaxDocsCached>200</queryResultMaxDocsCached>
-
-   <!-- Query Related Event Listeners
-
-        Various IndexSearcher related events can trigger Listeners to
-        take actions.
-
-        newSearcher - fired whenever a new searcher is being prepared
-        and there is a current searcher handling requests (aka
-        registered).  It can be used to prime certain caches to
-        prevent long request times for certain requests.
-
-        firstSearcher - fired whenever a new searcher is being
-        prepared but there is no current registered searcher to handle
-        requests or to gain autowarming data from.
-
-        
-     -->
-    <!-- QuerySenderListener takes an array of NamedList and executes a
-         local query request for each NamedList in sequence. 
-      -->
-    <listener event="newSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <lst>
-         <str name="q">database:*</str>
-         <str name="facet">true</str>
-         <str name="facet.mincount">1</str>
-         <str name="facet.field">author_exact</str>
-         <str name="facet.field">subject_exact</str>
-         <str name="facet.field">medium_exact</str>
-         <str name="facet.field">date</str>
-         <str name="facet.field">database</str>
-        </lst>
-      </arr>
-    </listener>
-    <listener event="firstSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <lst>
-         <str name="q">database:*</str>
-         <str name="facet">true</str>
-         <str name="facet.mincount">1</str>
-         <str name="facet.field">author_exact</str>
-         <str name="facet.field">subject_exact</str>
-         <str name="facet.field">medium_exact</str>
-         <str name="facet.field">date</str>
-         <str name="facet.field">database</str>
-        </lst>
-      </arr>
-    </listener>
-
-    <!-- Use Cold Searcher
-
-         If a search request comes in and there is no current
-         registered searcher, then immediately register the still
-         warming searcher and use it.  If "false" then all requests
-         will block until the first searcher is done warming.
-      -->
-    <useColdSearcher>false</useColdSearcher>
-
-    <!-- Max Warming Searchers
-         
-         Maximum number of searchers that may be warming in the
-         background concurrently.  An error is returned if this limit
-         is exceeded.
-
-         Recommend values of 1-2 for read-only slaves, higher for
-         masters w/o cache warming.
-      -->
-    <maxWarmingSearchers>2</maxWarmingSearchers>
-
-  </query>
-
-
-  <!-- Request Dispatcher
-
-       This section contains instructions for how the SolrDispatchFilter
-       should behave when processing requests for this SolrCore.
-
-       handleSelect is a legacy option that affects the behavior of requests
-       such as /select?qt=XXX
-
-       handleSelect="true" will cause the SolrDispatchFilter to process
-       the request and dispatch the query to a handler specified by the 
-       "qt" param, assuming "/select" isn't already registered.
-
-       handleSelect="false" will cause the SolrDispatchFilter to
-       ignore "/select" requests, resulting in a 404 unless a handler
-       is explicitly registered with the name "/select"
-
-       handleSelect="true" is not recommended for new users, but is the default
-       for backwards compatibility
-    -->
-  <requestDispatcher handleSelect="false" >
-    <!-- Request Parsing
-
-         These settings indicate how Solr Requests may be parsed, and
-         what restrictions may be placed on the ContentStreams from
-         those requests
-
-         enableRemoteStreaming - enables use of the stream.file
-         and stream.url parameters for specifying remote streams.
-
-         multipartUploadLimitInKB - specifies the max size (in KiB) of
-         Multipart File Uploads that Solr will allow in a Request.
-         
-         formdataUploadLimitInKB - specifies the max size (in KiB) of
-         form data (application/x-www-form-urlencoded) sent via
-         POST. You can use POST to pass request parameters not
-         fitting into the URL.
-         
-         addHttpRequestToContext - if set to true, it will instruct
-         the requestParsers to include the original HttpServletRequest
-         object in the context map of the SolrQueryRequest under the 
-         key "httpRequest". It will not be used by any of the existing
-         Solr components, but may be useful when developing custom 
-         plugins.
-         
-         *** WARNING ***
-         The settings below authorize Solr to fetch remote files, You
-         should make sure your system has some authentication before
-         using enableRemoteStreaming="true"
-
-      --> 
-    <requestParsers enableRemoteStreaming="true" 
-                    multipartUploadLimitInKB="2048000"
-                    formdataUploadLimitInKB="2048"
-                    addHttpRequestToContext="false"/>
-
-    <!-- HTTP Caching
-
-         Set HTTP caching related parameters (for proxy caches and clients).
-
-         The options below instruct Solr not to output any HTTP Caching
-         related headers
-      -->
-    <httpCaching never304="true" />
-    <!-- If you include a <cacheControl> directive, it will be used to
-         generate a Cache-Control header (as well as an Expires header
-         if the value contains "max-age=")
-         
-         By default, no Cache-Control header is generated.
-         
-         You can use the <cacheControl> option even if you have set
-         never304="true"
-      -->
-    <!--
-       <httpCaching never304="true" >
-         <cacheControl>max-age=30, public</cacheControl> 
-       </httpCaching>
-      -->
-    <!-- To enable Solr to respond with automatically generated HTTP
-         Caching headers, and to response to Cache Validation requests
-         correctly, set the value of never304="false"
-         
-         This will cause Solr to generate Last-Modified and ETag
-         headers based on the properties of the Index.
-
-         The following options can also be specified to affect the
-         values of these headers...
-
-         lastModFrom - the default value is "openTime" which means the
-         Last-Modified value (and validation against If-Modified-Since
-         requests) will all be relative to when the current Searcher
-         was opened.  You can change it to lastModFrom="dirLastMod" if
-         you want the value to exactly correspond to when the physical
-         index was last modified.
-
-         etagSeed="..." is an option you can change to force the ETag
-         header (and validation against If-None-Match requests) to be
-         different even if the index has not changed (ie: when making
-         significant changes to your config file)
-
-         (lastModifiedFrom and etagSeed are both ignored if you use
-         the never304="true" option)
-      -->
-    <!--
-       <httpCaching lastModifiedFrom="openTime"
-                    etagSeed="Solr">
-         <cacheControl>max-age=30, public</cacheControl> 
-       </httpCaching>
-      -->
-  </requestDispatcher>
-
-  <!-- Request Handlers 
-
-       http://wiki.apache.org/solr/SolrRequestHandler
-
-       Incoming queries will be dispatched to a specific handler by name
-       based on the path specified in the request.
-
-       Legacy behavior: If the request path uses "/select" but no Request
-       Handler has that name, and if handleSelect="true" has been specified in
-       the requestDispatcher, then the Request Handler is dispatched based on
-       the qt parameter.  Handlers without a leading '/' are accessed this way
-       like so: http://host/app/[core/]select?qt=name  If no qt is
-       given, then the requestHandler that declares default="true" will be
-       used or the one named "standard".
-
-       If a Request Handler is declared with startup="lazy", then it will
-       not be initialized until the first request that uses it.
-
-    -->
-  <!-- SearchHandler
-
-       http://wiki.apache.org/solr/SearchHandler
-
-       For processing Search Queries, the primary Request Handler
-       provided with Solr is "SearchHandler" It delegates to a sequent
-       of SearchComponents (see below) and supports distributed
-       queries across multiple shards
-    -->
-  <requestHandler name="/select" class="solr.SearchHandler">
-    <!-- default values for query parameters can be specified, these
-         will be overridden by parameters in the request
-      -->
-     <lst name="defaults">
-       <str name="echoParams">explicit</str>
-       <int name="rows">10</int>
-       <str name="df">text</str>
-       <str name="fl">*,score</str>
-     </lst>
-    <!-- In addition to defaults, "appends" params can be specified
-         to identify values which should be appended to the list of
-         multi-val params from the query (or the existing "defaults").
-      -->
-    <!-- In this example, the param "fq=instock:true" would be appended to
-         any query time fq params the user may specify, as a mechanism for
-         partitioning the index, independent of any user selected filtering
-         that may also be desired (perhaps as a result of faceted searching).
-
-         NOTE: there is *absolutely* nothing a client can do to prevent these
-         "appends" values from being used, so don't use this mechanism
-         unless you are sure you always want it.
-      -->
-    <!--
-       <lst name="appends">
-         <str name="fq">inStock:true</str>
-       </lst>
-      -->
-    <!-- "invariants" are a way of letting the Solr maintainer lock down
-         the options available to Solr clients.  Any params values
-         specified here are used regardless of what values may be specified
-         in either the query, the "defaults", or the "appends" params.
-
-         In this example, the facet.field and facet.query params would
-         be fixed, limiting the facets clients can use.  Faceting is
-         not turned on by default - but if the client does specify
-         facet=true in the request, these are the only facets they
-         will be able to see counts for; regardless of what other
-         facet.field or facet.query params they may specify.
-
-         NOTE: there is *absolutely* nothing a client can do to prevent these
-         "invariants" values from being used, so don't use this mechanism
-         unless you are sure you always want it.
-      -->
-    <!--
-       <lst name="invariants">
-         <str name="facet.field">cat</str>
-         <str name="facet.field">manu_exact</str>
-         <str name="facet.query">price:[* TO 500]</str>
-         <str name="facet.query">price:[500 TO *]</str>
-       </lst>
-      -->
-    <!-- If the default list of SearchComponents is not desired, that
-         list can either be overridden completely, or components can be
-         prepended or appended to the default list.  (see below)
-      -->
-    <!--
-       <arr name="components">
-         <str>nameOfCustomComponent1</str>
-         <str>nameOfCustomComponent2</str>
-       </arr>
-      -->
-    </requestHandler>
-
-  <!-- A request handler that returns indented JSON by default -->
-  <requestHandler name="/query" class="solr.SearchHandler">
-     <lst name="defaults">
-       <str name="echoParams">explicit</str>
-       <str name="wt">json</str>
-       <str name="indent">true</str>
-       <str name="df">text</str>
-     </lst>
-  </requestHandler>
-
-
-  <!-- realtime get handler, guaranteed to return the latest stored fields of
-       any document, without the need to commit or open a new searcher.  The
-       current implementation relies on the updateLog feature being enabled. -->
-  <requestHandler name="/get" class="solr.RealTimeGetHandler">
-     <lst name="defaults">
-       <str name="omitHeader">true</str>
-       <str name="wt">json</str>
-       <str name="indent">true</str>
-     </lst>
-  </requestHandler>
-
- 
-  <!-- A Robust Example 
-       
-       This example SearchHandler declaration shows off usage of the
-       SearchHandler with many defaults declared
-
-       Note that multiple instances of the same Request Handler
-       (SearchHandler) can be registered multiple times with different
-       names (and different init parameters)
-    -->
-  <requestHandler name="/browse" class="solr.SearchHandler">
-     <lst name="defaults">
-       <str name="echoParams">explicit</str>
-
-       <!-- VelocityResponseWriter settings -->
-       <str name="wt">velocity</str>
-       <str name="v.template">browse</str>
-       <str name="v.layout">layout</str>
-       <str name="title">Solritas</str>
-
-       <!-- Query settings -->
-       <str name="defType">edismax</str>
-       <str name="qf">
-          text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
-          title^10.0 description^5.0 keywords^5.0 author^2.0 resourcename^1.0
-       </str>
-       <str name="df">text</str>
-       <str name="mm">100%</str>
-       <str name="q.alt">*:*</str>
-       <str name="rows">10</str>
-       <str name="fl">*,score</str>
-
-       <str name="mlt.qf">
-         text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
-         title^10.0 description^5.0 keywords^5.0 author^2.0 resourcename^1.0
-       </str>
-       <str name="mlt.fl">text,features,name,sku,id,manu,cat,title,description,keywords,author,resourcename</str>
-       <int name="mlt.count">3</int>
-
-       <!-- Faceting defaults -->
-       <str name="facet">on</str>
-       <str name="facet.field">cat</str>
-       <str name="facet.field">manu_exact</str>
-       <str name="facet.field">content_type</str>
-       <str name="facet.field">author_s</str>
-       <str name="facet.query">ipod</str>
-       <str name="facet.query">GB</str>
-       <str name="facet.mincount">1</str>
-       <str name="facet.pivot">cat,inStock</str>
-       <str name="facet.range.other">after</str>
-       <str name="facet.range">price</str>
-       <int name="f.price.facet.range.start">0</int>
-       <int name="f.price.facet.range.end">600</int>
-       <int name="f.price.facet.range.gap">50</int>
-       <str name="facet.range">popularity</str>
-       <int name="f.popularity.facet.range.start">0</int>
-       <int name="f.popularity.facet.range.end">10</int>
-       <int name="f.popularity.facet.range.gap">3</int>
-       <str name="facet.range">manufacturedate_dt</str>
-       <str name="f.manufacturedate_dt.facet.range.start">NOW/YEAR-10YEARS</str>
-       <str name="f.manufacturedate_dt.facet.range.end">NOW</str>
-       <str name="f.manufacturedate_dt.facet.range.gap">+1YEAR</str>
-       <str name="f.manufacturedate_dt.facet.range.other">before</str>
-       <str name="f.manufacturedate_dt.facet.range.other">after</str>
-
-       <!-- Highlighting defaults -->
-       <str name="hl">on</str>
-       <str name="hl.fl">content features title name</str>
-       <str name="hl.encoder">html</str>
-       <str name="hl.simple.pre">&lt;b&gt;</str>
-       <str name="hl.simple.post">&lt;/b&gt;</str>
-       <str name="f.title.hl.fragsize">0</str>
-       <str name="f.title.hl.alternateField">title</str>
-       <str name="f.name.hl.fragsize">0</str>
-       <str name="f.name.hl.alternateField">name</str>
-       <str name="f.content.hl.snippets">3</str>
-       <str name="f.content.hl.fragsize">200</str>
-       <str name="f.content.hl.alternateField">content</str>
-       <str name="f.content.hl.maxAlternateFieldLength">750</str>
-
-       <!-- Spell checking defaults -->
-       <str name="spellcheck">on</str>
-       <str name="spellcheck.extendedResults">false</str>       
-       <str name="spellcheck.count">5</str>
-       <str name="spellcheck.alternativeTermCount">2</str>
-       <str name="spellcheck.maxResultsForSuggest">5</str>       
-       <str name="spellcheck.collate">true</str>
-       <str name="spellcheck.collateExtendedResults">true</str>  
-       <str name="spellcheck.maxCollationTries">5</str>
-       <str name="spellcheck.maxCollations">3</str>           
-     </lst>
-
-     <!-- append spellchecking to our list of components -->
-     <arr name="last-components">
-       <str>spellcheck</str>
-     </arr>
-  </requestHandler>
-
-
-  <!-- Update Request Handler.  
-       
-       http://wiki.apache.org/solr/UpdateXmlMessages
-
-       The canonical Request Handler for Modifying the Index through
-       commands specified using XML, JSON, CSV, or JAVABIN
-
-       Note: Since solr1.1 requestHandlers requires a valid content
-       type header if posted in the body. For example, curl now
-       requires: -H 'Content-type:text/xml; charset=utf-8'
-       
-       To override the request content type and force a specific 
-       Content-type, use the request parameter: 
-         ?update.contentType=text/csv
-       
-       This handler will pick a response format to match the input
-       if the 'wt' parameter is not explicit
-    -->
-  <requestHandler name="/update" class="solr.UpdateRequestHandler">
-    <!-- See below for information on defining 
-         updateRequestProcessorChains that can be used by name 
-         on each Update Request
-      -->
-    <!--
-       <lst name="defaults">
-         <str name="update.chain">dedupe</str>
-       </lst>
-       -->
-  </requestHandler>
-
-  <!-- for back compat with clients using /update/json and /update/csv -->  
-  <requestHandler name="/update/json" class="solr.JsonUpdateRequestHandler">
-        <lst name="defaults">
-         <str name="stream.contentType">application/json</str>
-       </lst>
-  </requestHandler>
-  <requestHandler name="/update/csv" class="solr.CSVRequestHandler">
-        <lst name="defaults">
-         <str name="stream.contentType">application/csv</str>
-       </lst>
-  </requestHandler>
-
-  <!-- Solr Cell Update Request Handler
-
-       http://wiki.apache.org/solr/ExtractingRequestHandler 
-
-    -->
-  <requestHandler name="/update/extract" 
-                  startup="lazy"
-                  class="solr.extraction.ExtractingRequestHandler" >
-    <lst name="defaults">
-      <str name="lowernames">true</str>
-      <str name="uprefix">ignored_</str>
-
-      <!-- capture link hrefs but ignore div attributes -->
-      <str name="captureAttr">true</str>
-      <str name="fmap.a">links</str>
-      <str name="fmap.div">ignored_</str>
-    </lst>
-  </requestHandler>
-
-
-  <!-- Field Analysis Request Handler
-
-       RequestHandler that provides much the same functionality as
-       analysis.jsp. Provides the ability to specify multiple field
-       types and field names in the same request and outputs
-       index-time and query-time analysis for each of them.
-
-       Request parameters are:
-       analysis.fieldname - field name whose analyzers are to be used
-
-       analysis.fieldtype - field type whose analyzers are to be used
-       analysis.fieldvalue - text for index-time analysis
-       q (or analysis.q) - text for query time analysis
-       analysis.showmatch (true|false) - When set to true and when
-           query analysis is performed, the produced tokens of the
-           field value analysis will be marked as "matched" for every
-           token that is produces by the query analysis
-   -->
-  <requestHandler name="/analysis/field" 
-                  startup="lazy"
-                  class="solr.FieldAnalysisRequestHandler" />
-
-
-  <!-- Document Analysis Handler
-
-       http://wiki.apache.org/solr/AnalysisRequestHandler
-
-       An analysis handler that provides a breakdown of the analysis
-       process of provided documents. This handler expects a (single)
-       content stream with the following format:
-
-       <docs>
-         <doc>
-           <field name="id">1</field>
-           <field name="name">The Name</field>
-           <field name="text">The Text Value</field>
-         </doc>
-         <doc>...</doc>
-         <doc>...</doc>
-         ...
-       </docs>
-
-    Note: Each document must contain a field which serves as the
-    unique key. This key is used in the returned response to associate
-    an analysis breakdown to the analyzed document.
-
-    Like the FieldAnalysisRequestHandler, this handler also supports
-    query analysis by sending either an "analysis.query" or "q"
-    request parameter that holds the query text to be analyzed. It
-    also supports the "analysis.showmatch" parameter which when set to
-    true, all field tokens that match the query tokens will be marked
-    as a "match". 
-  -->
-  <requestHandler name="/analysis/document" 
-                  class="solr.DocumentAnalysisRequestHandler" 
-                  startup="lazy" />
-
-  <!-- Admin Handlers
-
-       Admin Handlers - This will register all the standard admin
-       RequestHandlers.  
-    -->
-  <requestHandler name="/admin/" 
-                  class="solr.admin.AdminHandlers" />
-  <!-- This single handler is equivalent to the following... -->
-  <!--
-     <requestHandler name="/admin/luke"       class="solr.admin.LukeRequestHandler" />
-     <requestHandler name="/admin/system"     class="solr.admin.SystemInfoHandler" />
-     <requestHandler name="/admin/plugins"    class="solr.admin.PluginInfoHandler" />
-     <requestHandler name="/admin/threads"    class="solr.admin.ThreadDumpHandler" />
-     <requestHandler name="/admin/properties" class="solr.admin.PropertiesRequestHandler" />
-     <requestHandler name="/admin/file"       class="solr.admin.ShowFileRequestHandler" >
-    -->
-  <!-- If you wish to hide files under ${solr.home}/conf, explicitly
-       register the ShowFileRequestHandler using: 
-    -->
-  <!--
-     <requestHandler name="/admin/file" 
-                     class="solr.admin.ShowFileRequestHandler" >
-       <lst name="invariants">
-         <str name="hidden">synonyms.txt</str> 
-         <str name="hidden">anotherfile.txt</str> 
-       </lst>
-     </requestHandler>
-    -->
-
-  <!-- ping/healthcheck -->
-  <requestHandler name="/admin/ping" class="solr.PingRequestHandler">
-    <lst name="invariants">
-      <str name="q">solrpingquery</str>
-    </lst>
-    <lst name="defaults">
-      <str name="echoParams">all</str>
-    </lst>
-    <!-- An optional feature of the PingRequestHandler is to configure the 
-         handler with a "healthcheckFile" which can be used to enable/disable 
-         the PingRequestHandler.
-         relative paths are resolved against the data dir 
-      -->
-    <!-- <str name="healthcheckFile">server-enabled.txt</str> -->
-  </requestHandler>
-
-  <!-- Echo the request contents back to the client -->
-  <requestHandler name="/debug/dump" class="solr.DumpRequestHandler" >
-    <lst name="defaults">
-     <str name="echoParams">explicit</str> 
-     <str name="echoHandler">true</str>
-    </lst>
-  </requestHandler>
-  
-  <!-- Solr Replication
-
-       The SolrReplicationHandler supports replicating indexes from a
-       "master" used for indexing and "slaves" used for queries.
-
-       http://wiki.apache.org/solr/SolrReplication 
-
-       It is also necessary for SolrCloud to function (in Cloud mode, the
-       replication handler is used to bulk transfer segments when nodes 
-       are added or need to recover).
-
-       https://wiki.apache.org/solr/SolrCloud/
-    -->
-  <requestHandler name="/replication" class="solr.ReplicationHandler" > 
-    <!--
-       To enable simple master/slave replication, uncomment one of the 
-       sections below, depending on whether this solr instance should be
-       the "master" or a "slave".  If this instance is a "slave" you will 
-       also need to fill in the masterUrl to point to a real machine.
-    -->
-    <!--
-       <lst name="master">
-         <str name="replicateAfter">commit</str>
-         <str name="replicateAfter">startup</str>
-         <str name="confFiles">schema.xml,stopwords.txt</str>
-       </lst>
-    -->
-    <!--
-       <lst name="slave">
-         <str name="masterUrl">http://your-master-hostname:8983/solr</str>
-         <str name="pollInterval">00:00:60</str>
-       </lst>
-    -->
-  </requestHandler>
-
-  <!-- Search Components
-
-       Search components are registered to SolrCore and used by 
-       instances of SearchHandler (which can access them by name)
-       
-       By default, the following components are available:
-       
-       <searchComponent name="query"     class="solr.QueryComponent" />
-       <searchComponent name="facet"     class="solr.FacetComponent" />
-       <searchComponent name="mlt"       class="solr.MoreLikeThisComponent" />
-       <searchComponent name="highlight" class="solr.HighlightComponent" />
-       <searchComponent name="stats"     class="solr.StatsComponent" />
-       <searchComponent name="debug"     class="solr.DebugComponent" />
-   
-       Default configuration in a requestHandler would look like:
-
-       <arr name="components">
-         <str>query</str>
-         <str>facet</str>
-         <str>mlt</str>
-         <str>highlight</str>
-         <str>stats</str>
-         <str>debug</str>
-       </arr>
-
-       If you register a searchComponent to one of the standard names, 
-       that will be used instead of the default.
-
-       To insert components before or after the 'standard' components, use:
-    
-       <arr name="first-components">
-         <str>myFirstComponentName</str>
-       </arr>
-    
-       <arr name="last-components">
-         <str>myLastComponentName</str>
-       </arr>
-
-       NOTE: The component registered with the name "debug" will
-       always be executed after the "last-components" 
-       
-     -->
-  
-   <!-- Spell Check
-
-        The spell check component can return a list of alternative spelling
-        suggestions.  
-
-        http://wiki.apache.org/solr/SpellCheckComponent
-     -->
-  <searchComponent name="spellcheck" class="solr.SpellCheckComponent">
-
-    <str name="queryAnalyzerFieldType">text_general</str>
-
-    <!-- Multiple "Spell Checkers" can be declared and used by this
-         component
-      -->
-
-    <!-- a spellchecker built from a field of the main index -->
-    <lst name="spellchecker">
-      <str name="name">default</str>
-      <str name="field">text</str>
-      <str name="classname">solr.DirectSolrSpellChecker</str>
-      <!-- the spellcheck distance measure used, the default is the internal levenshtein -->
-      <str name="distanceMeasure">internal</str>
-      <!-- minimum accuracy needed to be considered a valid spellcheck suggestion -->
-      <float name="accuracy">0.5</float>
-      <!-- the maximum #edits we consider when enumerating terms: can be 1 or 2 -->
-      <int name="maxEdits">2</int>
-      <!-- the minimum shared prefix when enumerating terms -->
-      <int name="minPrefix">1</int>
-      <!-- maximum number of inspections per result. -->
-      <int name="maxInspections">5</int>
-      <!-- minimum length of a query term to be considered for correction -->
-      <int name="minQueryLength">4</int>
-      <!-- maximum threshold of documents a query term can appear to be considered for correction -->
-      <float name="maxQueryFrequency">0.01</float>
-      <!-- uncomment this to require suggestions to occur in 1% of the documents
-       <float name="thresholdTokenFrequency">.01</float>
-      -->
-    </lst>
-    
-    <!-- a spellchecker that can break or combine words.  See "/spell" handler below for usage -->
-    <lst name="spellchecker">
-      <str name="name">wordbreak</str>
-      <str name="classname">solr.WordBreakSolrSpellChecker</str>      
-      <str name="field">name</str>
-      <str name="combineWords">true</str>
-      <str name="breakWords">true</str>
-      <int name="maxChanges">10</int>
-    </lst>
-
-    <!-- a spellchecker that uses a different distance measure -->
-    <!--
-       <lst name="spellchecker">
-         <str name="name">jarowinkler</str>
-         <str name="field">spell</str>
-         <str name="classname">solr.DirectSolrSpellChecker</str>
-         <str name="distanceMeasure">
-           org.apache.lucene.search.spell.JaroWinklerDistance
-         </str>
-       </lst>
-     -->
-
-    <!-- a spellchecker that use an alternate comparator 
-
-         comparatorClass be one of:
-          1. score (default)
-          2. freq (Frequency first, then score)
-          3. A fully qualified class name
-      -->
-    <!--
-       <lst name="spellchecker">
-         <str name="name">freq</str>
-         <str name="field">lowerfilt</str>
-         <str name="classname">solr.DirectSolrSpellChecker</str>
-         <str name="comparatorClass">freq</str>
-      -->
-
-    <!-- A spellchecker that reads the list of words from a file -->
-    <!--
-       <lst name="spellchecker">
-         <str name="classname">solr.FileBasedSpellChecker</str>
-         <str name="name">file</str>
-         <str name="sourceLocation">spellings.txt</str>
-         <str name="characterEncoding">UTF-8</str>
-         <str name="spellcheckIndexDir">spellcheckerFile</str>
-       </lst>
-      -->
-  </searchComponent>
-
-  <!-- A request handler for demonstrating the spellcheck component.  
-
-       NOTE: This is purely as an example.  The whole purpose of the
-       SpellCheckComponent is to hook it into the request handler that
-       handles your normal user queries so that a separate request is
-       not needed to get suggestions.
-
-       IN OTHER WORDS, THERE IS REALLY GOOD CHANCE THE SETUP BELOW IS
-       NOT WHAT YOU WANT FOR YOUR PRODUCTION SYSTEM!
-       
-       See http://wiki.apache.org/solr/SpellCheckComponent for details
-       on the request parameters.
-    -->
-  <requestHandler name="/spell" class="solr.SearchHandler" startup="lazy">
-    <lst name="defaults">
-      <str name="df">text</str>
-      <!-- Solr will use suggestions from both the 'default' spellchecker
-           and from the 'wordbreak' spellchecker and combine them.
-           collations (re-written queries) can include a combination of
-           corrections from both spellcheckers -->
-      <str name="spellcheck.dictionary">default</str>
-      <str name="spellcheck.dictionary">wordbreak</str>
-      <str name="spellcheck">on</str>
-      <str name="spellcheck.extendedResults">true</str>       
-      <str name="spellcheck.count">10</str>
-      <str name="spellcheck.alternativeTermCount">5</str>
-      <str name="spellcheck.maxResultsForSuggest">5</str>       
-      <str name="spellcheck.collate">true</str>
-      <str name="spellcheck.collateExtendedResults">true</str>  
-      <str name="spellcheck.maxCollationTries">10</str>
-      <str name="spellcheck.maxCollations">5</str>         
-    </lst>
-    <arr name="last-components">
-      <str>spellcheck</str>
-    </arr>
-  </requestHandler>
-
-  <!-- Term Vector Component
-
-       http://wiki.apache.org/solr/TermVectorComponent
-    -->
-  <searchComponent name="tvComponent" class="solr.TermVectorComponent"/>
-
-  <!-- A request handler for demonstrating the term vector component
-
-       This is purely as an example.
-
-       In reality you will likely want to add the component to your 
-       already specified request handlers. 
-    -->
-  <requestHandler name="/tvrh" class="solr.SearchHandler" startup="lazy">
-    <lst name="defaults">
-      <str name="df">text</str>
-      <bool name="tv">true</bool>
-    </lst>
-    <arr name="last-components">
-      <str>tvComponent</str>
-    </arr>
-  </requestHandler>
-
-  <!-- Clustering Component
-
-       http://wiki.apache.org/solr/ClusteringComponent
-
-       You'll need to set the solr.clustering.enabled system property
-       when running solr to run with clustering enabled:
-
-            java -Dsolr.clustering.enabled=true -jar start.jar
-
-    -->
-  <searchComponent name="clustering"
-                   enable="${solr.clustering.enabled:false}"
-                   class="solr.clustering.ClusteringComponent" >
-    <!-- Declare an engine -->
-    <lst name="engine">
-      <!-- The name, only one can be named "default" -->
-      <str name="name">default</str>
-
-      <!-- Class name of Carrot2 clustering algorithm.
-
-           Currently available algorithms are:
-           
-           * org.carrot2.clustering.lingo.LingoClusteringAlgorithm
-           * org.carrot2.clustering.stc.STCClusteringAlgorithm
-           * org.carrot2.clustering.kmeans.BisectingKMeansClusteringAlgorithm
-           
-           See http://project.carrot2.org/algorithms.html for the
-           algorithm's characteristics.
-        -->
-      <str name="carrot.algorithm">org.carrot2.clustering.lingo.LingoClusteringAlgorithm</str>
-
-      <!-- Overriding values for Carrot2 default algorithm attributes.
-
-           For a description of all available attributes, see:
-           http://download.carrot2.org/stable/manual/#chapter.components.
-           Use attribute key as name attribute of str elements
-           below. These can be further overridden for individual
-           requests by specifying attribute key as request parameter
-           name and attribute value as parameter value.
-        -->
-      <str name="LingoClusteringAlgorithm.desiredClusterCountBase">20</str>
-
-      <!-- Location of Carrot2 lexical resources.
-
-           A directory from which to load Carrot2-specific stop words
-           and stop labels. Absolute or relative to Solr config directory.
-           If a specific resource (e.g. stopwords.en) is present in the
-           specified dir, it will completely override the corresponding
-           default one that ships with Carrot2.
-
-           For an overview of Carrot2 lexical resources, see:
-           http://download.carrot2.org/head/manual/#chapter.lexical-resources
-        -->
-      <str name="carrot.lexicalResourcesDir">clustering/carrot2</str>
-
-      <!-- The language to assume for the documents.
-
-           For a list of allowed values, see:
-           http://download.carrot2.org/stable/manual/#section.attribute.lingo.MultilingualClustering.defaultLanguage
-       -->
-      <str name="MultilingualClustering.defaultLanguage">ENGLISH</str>
-    </lst>
-    <lst name="engine">
-      <str name="name">stc</str>
-      <str name="carrot.algorithm">org.carrot2.clustering.stc.STCClusteringAlgorithm</str>
-    </lst>
-  </searchComponent>
-
-  <!-- A request handler for demonstrating the clustering component
-
-       This is purely as an example.
-
-       In reality you will likely want to add the component to your 
-       already specified request handlers. 
-    -->
-  <requestHandler name="/clustering"
-                  startup="lazy"
-                  enable="${solr.clustering.enabled:false}"
-                  class="solr.SearchHandler">
-    <lst name="defaults">
-      <bool name="clustering">true</bool>
-      <str name="clustering.engine">default</str>
-      <bool name="clustering.results">true</bool>
-      <!-- The title field -->
-      <str name="carrot.title">name</str>
-      <str name="carrot.url">id</str>
-      <!-- The field to cluster on -->
-       <str name="carrot.snippet">features</str>
-       <!-- produce summaries -->
-       <bool name="carrot.produceSummary">true</bool>
-       <!-- the maximum number of labels per cluster -->
-       <!--<int name="carrot.numDescriptions">5</int>-->
-       <!-- produce sub clusters -->
-       <bool name="carrot.outputSubClusters">false</bool>
-       
-       <str name="defType">edismax</str>
-       <str name="qf">
-         text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
-       </str>
-       <str name="q.alt">*:*</str>
-       <str name="rows">10</str>
-       <str name="fl">*,score</str>
-    </lst>     
-    <arr name="last-components">
-      <str>clustering</str>
-    </arr>
-  </requestHandler>
-  
-  <!-- Terms Component
-
-       http://wiki.apache.org/solr/TermsComponent
-
-       A component to return terms and document frequency of those
-       terms
-    -->
-  <searchComponent name="terms" class="solr.TermsComponent"/>
-
-  <!-- A request handler for demonstrating the terms component -->
-  <requestHandler name="/terms" class="solr.SearchHandler" startup="lazy">
-     <lst name="defaults">
-      <bool name="terms">true</bool>
-      <bool name="distrib">false</bool>
-    </lst>     
-    <arr name="components">
-      <str>terms</str>
-    </arr>
-  </requestHandler>
-
-
-  <!-- Query Elevation Component
-
-       http://wiki.apache.org/solr/QueryElevationComponent
-
-       a search component that enables you to configure the top
-       results for a given query regardless of the normal lucene
-       scoring.
-    -->
-  <searchComponent name="elevator" class="solr.QueryElevationComponent" >
-    <!-- pick a fieldType to analyze queries -->
-    <str name="queryFieldType">string</str>
-    <str name="config-file">elevate.xml</str>
-  </searchComponent>
-
-  <!-- A request handler for demonstrating the elevator component -->
-  <requestHandler name="/elevate" class="solr.SearchHandler" startup="lazy">
-    <lst name="defaults">
-      <str name="echoParams">explicit</str>
-      <str name="df">text</str>
-    </lst>
-    <arr name="last-components">
-      <str>elevator</str>
-    </arr>
-  </requestHandler>
-
-  <!-- Highlighting Component
-
-       http://wiki.apache.org/solr/HighlightingParameters
-    -->
-  <searchComponent class="solr.HighlightComponent" name="highlight">
-    <highlighting>
-      <!-- Configure the standard fragmenter -->
-      <!-- This could most likely be commented out in the "default" case -->
-      <fragmenter name="gap" 
-                  default="true"
-                  class="solr.highlight.GapFragmenter">
-        <lst name="defaults">
-          <int name="hl.fragsize">100</int>
-        </lst>
-      </fragmenter>
-
-      <!-- A regular-expression-based fragmenter 
-           (for sentence extraction) 
-        -->
-      <fragmenter name="regex" 
-                  class="solr.highlight.RegexFragmenter">
-        <lst name="defaults">
-          <!-- slightly smaller fragsizes work better because of slop -->
-          <int name="hl.fragsize">70</int>
-          <!-- allow 50% slop on fragment sizes -->
-          <float name="hl.regex.slop">0.5</float>
-          <!-- a basic sentence pattern -->
-          <str name="hl.regex.pattern">[-\w ,/\n\&quot;&apos;]{20,200}</str>
-        </lst>
-      </fragmenter>
-
-      <!-- Configure the standard formatter -->
-      <formatter name="html" 
-                 default="true"
-                 class="solr.highlight.HtmlFormatter">
-        <lst name="defaults">
-          <str name="hl.simple.pre"><![CDATA[<em>]]></str>
-          <str name="hl.simple.post"><![CDATA[</em>]]></str>
-        </lst>
-      </formatter>
-
-      <!-- Configure the standard encoder -->
-      <encoder name="html" 
-               class="solr.highlight.HtmlEncoder" />
-
-      <!-- Configure the standard fragListBuilder -->
-      <fragListBuilder name="simple" 
-                       class="solr.highlight.SimpleFragListBuilder"/>
-      
-      <!-- Configure the single fragListBuilder -->
-      <fragListBuilder name="single" 
-                       class="solr.highlight.SingleFragListBuilder"/>
-      
-      <!-- Configure the weighted fragListBuilder -->
-      <fragListBuilder name="weighted" 
-                       default="true"
-                       class="solr.highlight.WeightedFragListBuilder"/>
-      
-      <!-- default tag FragmentsBuilder -->
-      <fragmentsBuilder name="default" 
-                        default="true"
-                        class="solr.highlight.ScoreOrderFragmentsBuilder">
-        <!-- 
-        <lst name="defaults">
-          <str name="hl.multiValuedSeparatorChar">/</str>
-        </lst>
-        -->
-      </fragmentsBuilder>
-
-      <!-- multi-colored tag FragmentsBuilder -->
-      <fragmentsBuilder name="colored" 
-                        class="solr.highlight.ScoreOrderFragmentsBuilder">
-        <lst name="defaults">
-          <str name="hl.tag.pre"><![CDATA[
-               <b style="background:yellow">,<b style="background:lawgreen">,
-               <b style="background:aquamarine">,<b style="background:magenta">,
-               <b style="background:palegreen">,<b style="background:coral">,
-               <b style="background:wheat">,<b style="background:khaki">,
-               <b style="background:lime">,<b style="background:deepskyblue">]]></str>
-          <str name="hl.tag.post"><![CDATA[</b>]]></str>
-        </lst>
-      </fragmentsBuilder>
-      
-      <boundaryScanner name="default" 
-                       default="true"
-                       class="solr.highlight.SimpleBoundaryScanner">
-        <lst name="defaults">
-          <str name="hl.bs.maxScan">10</str>
-          <str name="hl.bs.chars">.,!? &#9;&#10;&#13;</str>
-        </lst>
-      </boundaryScanner>
-      
-      <boundaryScanner name="breakIterator" 
-                       class="solr.highlight.BreakIteratorBoundaryScanner">
-        <lst name="defaults">
-          <!-- type should be one of CHARACTER, WORD(default), LINE and SENTENCE -->
-          <str name="hl.bs.type">WORD</str>
-          <!-- language and country are used when constructing Locale object.  -->
-          <!-- And the Locale object will be used when getting instance of BreakIterator -->
-          <str name="hl.bs.language">en</str>
-          <str name="hl.bs.country">US</str>
-        </lst>
-      </boundaryScanner>
-    </highlighting>
-  </searchComponent>
-
-  <!-- Update Processors
-
-       Chains of Update Processor Factories for dealing with Update
-       Requests can be declared, and then used by name in Update
-       Request Processors
-
-       http://wiki.apache.org/solr/UpdateRequestProcessor
-
-    --> 
-  <!-- Deduplication
-
-       An example dedup update processor that creates the "id" field
-       on the fly based on the hash code of some other fields.  This
-       example has overwriteDupes set to false since we are using the
-       id field as the signatureField and Solr will maintain
-       uniqueness based on that anyway.  
-       
-    -->
-  <!--
-     <updateRequestProcessorChain name="dedupe">
-       <processor class="solr.processor.SignatureUpdateProcessorFactory">
-         <bool name="enabled">true</bool>
-         <str name="signatureField">id</str>
-         <bool name="overwriteDupes">false</bool>
-         <str name="fields">name,features,cat</str>
-         <str name="signatureClass">solr.processor.Lookup3Signature</str>
-       </processor>
-       <processor class="solr.LogUpdateProcessorFactory" />
-       <processor class="solr.RunUpdateProcessorFactory" />
-     </updateRequestProcessorChain>
-    -->
-  
-  <!-- Language identification
-
-       This example update chain identifies the language of the incoming
-       documents using the langid contrib. The detected language is
-       written to field language_s. No field name mapping is done.
-       The fields used for detection are text, title, subject and description,
-       making this example suitable for detecting languages form full-text
-       rich documents injected via ExtractingRequestHandler.
-       See more about langId at http://wiki.apache.org/solr/LanguageDetection
-    -->
-    <!--
-     <updateRequestProcessorChain name="langid">
-       <processor class="org.apache.solr.update.processor.TikaLanguageIdentifierUpdateProcessorFactory">
-         <str name="langid.fl">text,title,subject,description</str>
-         <str name="langid.langField">language_s</str>
-         <str name="langid.fallback">en</str>
-       </processor>
-       <processor class="solr.LogUpdateProcessorFactory" />
-       <processor class="solr.RunUpdateProcessorFactory" />
-     </updateRequestProcessorChain>
-    -->
-
-  <!-- Script update processor
-
-    This example hooks in an update processor implemented using JavaScript.
-
-    See more about the script update processor at http://wiki.apache.org/solr/ScriptUpdateProcessor
-  -->
-  <!--
-    <updateRequestProcessorChain name="script">
-      <processor class="solr.StatelessScriptUpdateProcessorFactory">
-        <str name="script">update-script.js</str>
-        <lst name="params">
-          <str name="config_param">example config parameter</str>
-        </lst>
-      </processor>
-      <processor class="solr.RunUpdateProcessorFactory" />
-    </updateRequestProcessorChain>
-  -->
- 
-  <!-- Response Writers
-
-       http://wiki.apache.org/solr/QueryResponseWriter
-
-       Request responses will be written using the writer specified by
-       the 'wt' request parameter matching the name of a registered
-       writer.
-
-       The "default" writer is the default and will be used if 'wt' is
-       not specified in the request.
-    -->
-  <!-- The following response writers are implicitly configured unless
-       overridden...
-    -->
-  <!--
-     <queryResponseWriter name="xml" 
-                          default="true"
-                          class="solr.XMLResponseWriter" />
-     <queryResponseWriter name="json" class="solr.JSONResponseWriter"/>
-     <queryResponseWriter name="python" class="solr.PythonResponseWriter"/>
-     <queryResponseWriter name="ruby" class="solr.RubyResponseWriter"/>
-     <queryResponseWriter name="php" class="solr.PHPResponseWriter"/>
-     <queryResponseWriter name="phps" class="solr.PHPSerializedResponseWriter"/>
-     <queryResponseWriter name="csv" class="solr.CSVResponseWriter"/>
-     <queryResponseWriter name="schema.xml" class="solr.SchemaXmlResponseWriter"/>
-    -->
-
-  <queryResponseWriter name="json" class="solr.JSONResponseWriter">
-     <!-- For the purposes of the tutorial, JSON responses are written as
-      plain text so that they are easy to read in *any* browser.
-      If you expect a MIME type of "application/json" just remove this override.
-     -->
-    <str name="content-type">text/plain; charset=UTF-8</str>
-  </queryResponseWriter>
-  
-  <!--
-     Custom response writers can be declared as needed...
-    -->
-    <queryResponseWriter name="velocity" class="solr.VelocityResponseWriter" startup="lazy"/>
-  
-
-  <!-- XSLT response writer transforms the XML output by any xslt file found
-       in Solr's conf/xslt directory.  Changes to xslt files are checked for
-       every xsltCacheLifetimeSeconds.  
-    -->
-  <queryResponseWriter name="xslt" class="solr.XSLTResponseWriter">
-    <int name="xsltCacheLifetimeSeconds">5</int>
-  </queryResponseWriter>
-
-  <!-- Query Parsers
-
-       http://wiki.apache.org/solr/SolrQuerySyntax
-
-       Multiple QParserPlugins can be registered by name, and then
-       used in either the "defType" param for the QueryComponent (used
-       by SearchHandler) or in LocalParams
-    -->
-  <!-- example of registering a query parser -->
-  <!--
-     <queryParser name="myparser" class="com.mycompany.MyQParserPlugin"/>
-    -->
-
-  <!-- Function Parsers
-
-       http://wiki.apache.org/solr/FunctionQuery
-
-       Multiple ValueSourceParsers can be registered by name, and then
-       used as function names when using the "func" QParser.
-    -->
-  <!-- example of registering a custom function parser  -->
-  <!--
-     <valueSourceParser name="myfunc" 
-                        class="com.mycompany.MyValueSourceParser" />
-    -->
-    
-  
-  <!-- Document Transformers
-       http://wiki.apache.org/solr/DocTransformers
-    -->
-  <!--
-     Could be something like:
-     <transformer name="db" class="com.mycompany.LoadFromDatabaseTransformer" >
-       <int name="connection">jdbc://....</int>
-     </transformer>
-     
-     To add a constant value to all docs, use:
-     <transformer name="mytrans2" class="org.apache.solr.response.transform.ValueAugmenterFactory" >
-       <int name="value">5</int>
-     </transformer>
-     
-     If you want the user to still be able to change it with _value:something_ use this:
-     <transformer name="mytrans3" class="org.apache.solr.response.transform.ValueAugmenterFactory" >
-       <double name="defaultValue">5</double>
-     </transformer>
-
-      If you are using the QueryElevationComponent, you may wish to mark documents that get boosted.  The
-      EditorialMarkerFactory will do exactly that:
-     <transformer name="qecBooster" class="org.apache.solr.response.transform.EditorialMarkerFactory" />
-    -->
-    
-
-  <!-- Legacy config for the admin interface -->
-  <admin>
-    <defaultQuery>*:*</defaultQuery>
-  </admin>
-
-</config>

diff --git a/zookeeper/solr/collection1/conf/spellings.txt b/zookeeper/solr/collection1/conf/spellings.txt
deleted file mode 100644 (file)
index d7ede6f..0000000
--- a/zookeeper/solr/collection1/conf/spellings.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-pizza
-history
\ No newline at end of file

diff --git a/zookeeper/solr/collection1/conf/stopwords.txt b/zookeeper/solr/collection1/conf/stopwords.txt
deleted file mode 100644 (file)
index ae1e83e..0000000
--- a/zookeeper/solr/collection1/conf/stopwords.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.

diff --git a/zookeeper/solr/collection1/conf/synonyms.txt b/zookeeper/solr/collection1/conf/synonyms.txt
deleted file mode 100644 (file)
index 7f72128..0000000
--- a/zookeeper/solr/collection1/conf/synonyms.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#-----------------------------------------------------------------------
-#some test synonym mappings unlikely to appear in real input text
-aaafoo => aaabar
-bbbfoo => bbbfoo bbbbar
-cccfoo => cccbar cccbaz
-fooaaa,baraaa,bazaaa
-
-# Some synonym groups specific to this example
-GB,gib,gigabyte,gigabytes
-MB,mib,megabyte,megabytes
-Television, Televisions, TV, TVs
-#notice we use "gib" instead of "GiB" so any WordDelimiterFilter coming
-#after us won't split it into two words.
-
-# Synonym mappings can be used for spelling correction too
-pixima => pixma
-

diff --git a/zookeeper/solr/collection1/conf/update-script.js b/zookeeper/solr/collection1/conf/update-script.js
deleted file mode 100644 (file)
index 49b07f9..0000000
--- a/zookeeper/solr/collection1/conf/update-script.js
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
-  This is a basic skeleton JavaScript update processor.
-
-  In order for this to be executed, it must be properly wired into solrconfig.xml; by default it is commented out in
-  the example solrconfig.xml and must be uncommented to be enabled.
-
-  See http://wiki.apache.org/solr/ScriptUpdateProcessor for more details.
-*/
-
-function processAdd(cmd) {
-
-  doc = cmd.solrDoc;  // org.apache.solr.common.SolrInputDocument
-  id = doc.getFieldValue("id");
-  logger.info("update-script#processAdd: id=" + id);
-
-// Set a field value:
-//  doc.setField("foo_s", "whatever");
-
-// Get a configuration parameter:
-//  config_param = params.get('config_param');  // "params" only exists if processor configured with <lst name="params">
-
-// Get a request parameter:
-// some_param = req.getParams().get("some_param")
-
-// Add a field of field names that match a pattern:
-//   - Potentially useful to determine the fields/attributes represented in a result set, via faceting on field_name_ss
-//  field_names = doc.getFieldNames().toArray();
-//  for(i=0; i < field_names.length; i++) {
-//    field_name = field_names[i];
-//    if (/attr_.*/.test(field_name)) { doc.addField("attribute_ss", field_names[i]); }
-//  }
-
-}
-
-function processDelete(cmd) {
-  // no-op
-}
-
-function processMergeIndexes(cmd) {
-  // no-op
-}
-
-function processCommit(cmd) {
-  // no-op
-}
-
-function processRollback(cmd) {
-  // no-op
-}
-
-function finish() {
-  // no-op
-}

diff --git a/zookeeper/solr/collection1/conf/velocity/README.txt b/zookeeper/solr/collection1/conf/velocity/README.txt
deleted file mode 100644 (file)
index 5d560ba..0000000
--- a/zookeeper/solr/collection1/conf/velocity/README.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-Introduction
-------------
-Solr Search Velocity Templates
-
-A quick demo of using Solr using http://wiki.apache.org/solr/VelocityResponseWriter
-
-You typically access these templates via:
-       http://localhost:8983/solr/collection1/browse
-
-It's called "browse" because you can click around with your mouse
-without needing to type any search terms.  And of course it
-also works as a standard search app as well.
-
-Known Limitations
------------------
-* The /browse and the VelocityResponseWriter component
-  serve content directly from Solr, which usually requires
-  Solr's HTTP API to be exposed.  Advanced users could
-  potentially access other parts of Solr directly.
-* There are some hard coded fields in these templates.
-  Since these templates live under conf, they should be
-  considered part of the overall configuration, and
-  must be coordinated with schema.xml and solrconfig.xml
-
-Velocity Info
--------------
-Java-based template language.
-
-It's nice in this context because change to the templates
-are immediately visible in browser on the next visit.
-
-Links:
-       http://velocity.apache.org
-       http://wiki.apache.org/velocity/
-       http://velocity.apache.org/engine/releases/velocity-1.7/user-guide.html
-
-
-File List
----------
-
-System and Misc:
-  VM_global_library.vm    - Macros used other templates,
-                            exact filename is important for Velocity to see it
-  error.vm                - shows errors, if any
-  debug.vm                - includes toggle links for "explain" and "all fields"
-                            activated by debug link in footer.vm
-  README.txt              - this file
-
-Overall Page Composition:
-  browse.vm               - Main entry point into templates
-  layout.vm               - overall HTML page layout
-  head.vm                 - elements in the <head> section of the HTML document
-  header.vm               - top section of page visible to users
-  footer.vm               - bottom section of page visible to users,
-                            includes debug and help links
-  main.css                - CSS style for overall pages
-                            see also jquery.autocomplete.css
-
-Query Form and Options:
-  query_form.vm           - renders query form
-  query_group.vm          - group by fields
-                            e.g.: Manufacturer or Poplularity
-  query_spatial.vm        - select box for location based Geospacial search
-
-Spelling Suggestions:
-  did_you_mean.vm         - hyperlinked spelling suggestions in results
-  suggest.vm              - dynamic spelling suggestions
-                            as you type in the search form
-  jquery.autocomplete.js  - supporting files for dynamic suggestions
-  jquery.autocomplete.css - Most CSS is defined in main.css
-
-
-Search Results, General:
-  (see also browse.vm)
-  tabs.vm                 - provides navigation to advanced search options
-  pagination_top.vm       - paging and staticis at top of results
-  pagination_bottom.vm    - paging and staticis at bottom of results
-  results_list.vm
-  hit.vm                  - called for each matching doc,
-                            decides which template to use
-  hit_grouped.vm          - display results grouped by field values
-  product_doc.vm          - display a Product
-  join_doc.vm             - display a joined document
-  richtext_doc.vm         - display a complex/misc. document
-  hit_plain.vm            - basic display of all fields,
-                            edit results_list.vm to enable this
-
-
-Search Results, Facets & Clusters:
-  facets.vm               - calls the 4 facet and 1 cluster template
-  facet_fields.vm         - display facets based on field values
-                            e.g.: fields specified by &facet.field=
-  facet_queries.vm        - display facets based on specific facet queries
-                            e.g.: facets specified by &facet.query=
-  facet_ranges.vm         - display facets based on ranges
-                            e.g.: ranges specified by &facet.range=
-  facet_pivot.vm          - display pivot based facets
-                            e.g.: facets specified by &facet.pivot=
-  cluster.vm              - if clustering is available
-                            then call cluster_results.vm
-  cluster_results.vm      - actual rendering of clusters

diff --git a/zookeeper/solr/collection1/conf/velocity/VM_global_library.vm b/zookeeper/solr/collection1/conf/velocity/VM_global_library.vm
deleted file mode 100644 (file)
index 5dda07c..0000000
--- a/zookeeper/solr/collection1/conf/velocity/VM_global_library.vm
+++ /dev/null
@@ -1,175 +0,0 @@
-#**
- *  Global macros used by other templates.
- *  This file must be named VM_global_library.vm
- *  in order for Velocity to find it.
- *#
-
-#macro(param $key)$request.params.get($key)#end
-
-#macro(url_root)/solr#end
-
-## TODO: s/url_for_solr/url_for_core/ and s/url_root/url_for_solr/
-#macro(core_name)$request.core.name#end
-#macro(url_for_solr)#{url_root}#if($request.core.name != "")/$request.core.name#end#end
-#macro(url_for_home)#url_for_solr/browse#end
-
-#macro(q)&q=$!{esc.url($params.get('q'))}#end
-
-#macro(fqs $p)#foreach($fq in $p)#if($velocityCount>1)&#{end}fq=$esc.url($fq)#end#end
-
-#macro(debug)#if($request.params.get('debugQuery'))&debugQuery=true#end#end
-
-#macro(boostPrice)#if($request.params.get('bf') == 'price')&bf=price#end#end        
-
-#macro(annotate)#if($request.params.get('annotateBrowse'))&annotateBrowse=true#end#end
-
-#macro(annTitle $msg)#if($annotate == true)title="$msg"#end#end
-
-#macro(spatial)#if($request.params.get('sfield'))&sfield=store#end#if($request.params.get('pt'))&pt=$request.params.get('pt')#end#if($request.params.get('d'))&d=$request.params.get('d')#end#end
-
-#macro(qOpts)#set($queryOpts = $request.params.get("queryOpts"))#if($queryOpts && $queryOpts != "")&queryOpts=$queryOpts#end#end
-
-#macro(group)#if($request.params.getBool("group") == true)&group=true#end#if($request.params.get("group.field"))#foreach($grp in $request.params.getParams('group.field'))&group.field=$grp#end#end#end
-
-#macro(sort $p)#if($p)#foreach($s in $p)&sort=$esc.url($s)#end#end#end
-
-#macro(lensNoQ)?#if($request.params.getParams('fq') and $list.size($request.params.getParams('fq')) > 0)&#fqs($request.params.getParams('fq'))#end#sort($request.params.getParams('sort'))#debug#boostPrice#annotate#spatial#qOpts#group#end
-#macro(lens)#lensNoQ#q#end
-        
-
-#macro(url_for_lens)#{url_for_home}#lens#end
-
-#macro(url_for_start $start)#url_for_home#lens&start=$start#end
-
-#macro(url_for_filters $p)#url_for_home?#q#boostPrice#spatial#qOpts#if($list.size($p) > 0)&#fqs($p)#end#debug#end
-
-#macro(url_for_nested_facet_query $field)#url_for_home#lens&fq=$esc.url($field)#end
-
-## TODO: convert to use {!raw f=$field}$value (with escaping of course)
-#macro(url_for_facet_filter $field $value)#url_for_home#lens&fq=$esc.url($field):%22$esc.url($value)%22#end
-
-#macro(url_for_facet_date_filter $field $value)#url_for_home#lens&fq=$esc.url($field):$esc.url($value)#end
-
-#macro(url_for_facet_range_filter $field $value)#url_for_home#lens&fq=$esc.url($field):$esc.url($value)#end
-
-
-#macro(link_to_previous_page $text)
-  #if($page.current_page_number > 1)
-    #set($prev_start = $page.start - $page.results_per_page)
-    <a class="prev-page" href="#url_for_start($prev_start)">$text</a>
-  #end
-#end
-
-#macro(link_to_next_page $text)
-  #if($page.current_page_number < $page.page_count)
-    #set($next_start = $page.start + $page.results_per_page)
-    <a class="next-page" href="#url_for_start($next_start)">$text</a>
-  #end
-#end
-
-#macro(link_to_page $page_number $text)
-  #if($page_number == $page.current_page_number)
-    $text
-  #else
-    #if($page_number <= $page.page_count)
-      #set($page_start = $page_number * $page.results_per_page - $page.results_per_page)
-      <a class="page" href="#url_for_start($page_start)">$text</a>
-    #end
-  #end
-#end
-
-#macro(display_facet_query $field, $display, $fieldName)
-  #if($field.size() > 0)
-  <span class="facet-field">$display</span>
-    <ul>
-    #foreach ($facet in $field)
-      #if ($facet.value > 0)
-        #set($facetURL = "#url_for_nested_facet_query($facet.key)")
-        #if ($facetURL != '')
-          <li><a href="$facetURL">$facet.key</a> ($facet.value)</li>
-        #end
-      #end
-    #end
-    </ul>
-  #end      
-#end
-
-
-#macro(display_facet_range $field, $display, $fieldName, $start, $end, $gap, $before, $after)
-  <span class="facet-field">$display</span>
-    <ul>
-    #if($before && $before != "")
-      #set($value = "[* TO " + "#format_value($start)" + "}")
-      #set($facetURL = "#url_for_facet_range_filter($fieldName, $value)")
-      <li><a href="$facetURL">Less than #format_value($start)</a> ($before)</li>
-    #end
-    #foreach ($facet in $field)
-      #set($rangeEnd = "#range_get_to_value($facet.key, $gap)")
-      #set($value = "[" + $facet.key + " TO " + $rangeEnd + "}")
-      #set($facetURL = "#url_for_facet_range_filter($fieldName, $value)")
-      #if ($facetURL != '')
-        <li><a href="$facetURL">$facet.key - #format_value($rangeEnd)</a> ($facet.value)</li>
-      #end
-    #end
-    #if($end && $end != "" && $after > 0)
-      #set($value = "[" + "#format_value($end)" + " TO *}")
-      #set($facetURL = "#url_for_facet_range_filter($fieldName, $value)")
-      <li><a href="$facetURL">More than #format_value($end)</a> ($after)</li>
-    #end
-    </ul>
-#end
-
-## $pivots is a list of facet_pivot
-#macro(display_facet_pivot $pivots, $display)
-  #if($pivots.size() > 0)
-  <span class="facet-field">$display</span>
-    <ul>
-      #foreach ($pivot in $pivots)
-        #foreach ($entry in $pivot.value)
-          <a href="#url_for_facet_filter($entry.field, $entry.value)">$entry.field::$entry.value</a> ($entry.count)
-          <ul>
-            #foreach($nest in $entry.pivot)
-              <a href="#url_for_facet_filter($entry.field, $entry.value)&fq=$esc.url($nest.field):%22$esc.url($nest.value)%22">$nest.field::$nest.value</a> ($nest.count)
-            #end
-          </ul>
-        #end
-      #end
-    </ul>
-  #end
-#end
-
-#macro(field $f)
-  #if($response.response.highlighting.get($docId).get($f).get(0))
-    #set($pad = "")
-    #foreach($v in $response.response.highlighting.get($docId).get($f))
-$pad$v##
-      #set($pad = " ... ")
-    #end
-  #else
-    #foreach($v in $doc.getFieldValues($f))
-$v##
-    #end
-  #end
-#end  
-
-#macro(utc_date $theDate)
-$date.format("yyyy-MM-dd'T'HH:mm:ss'Z'",$theDate,$date.getLocale(),$date.getTimeZone().getTimeZone("UTC"))##
-#end
-
-#macro(format_value $val)
-#if(${val.class.name} == "java.util.Date")
-#utc_date($val)##
-#else
-$val##
-#end
-#end
-
-#macro(range_get_to_value $inval, $gapval)
-#if(${gapval.class.name} == "java.lang.String")
-$inval$gapval##
-#elseif(${gapval.class.name} == "java.lang.Float" || ${inval.class.name} == "java.lang.Float")
-$math.toDouble($math.add($inval,$gapval))##
-#else
-$math.add($inval,$gapval)##
-#end
-#end

diff --git a/zookeeper/solr/collection1/conf/velocity/browse.vm b/zookeeper/solr/collection1/conf/velocity/browse.vm
deleted file mode 100644 (file)
index 10ecaeb..0000000
--- a/zookeeper/solr/collection1/conf/velocity/browse.vm
+++ /dev/null
@@ -1,33 +0,0 @@
-#**
- *  Main entry point into the /browse templates
- *#
-
-#set($searcher = $request.searcher)
-#set($params = $request.params)
-#set($clusters = $response.response.clusters)
-#set($mltResults = $response.response.get("moreLikeThis"))
-#set($annotate = $params.get("annotateBrowse"))
-#parse('query_form.vm')
-#parse('did_you_mean.vm')
-
-<div class="navigators">
-  #parse("facets.vm")
-</div>
-
-<div class="pagination">
-  #parse("pagination_top.vm")
-</div>
-
-## Show Error Message, if any
-<div class="error">
-  #parse("error.vm")
-</div>
-
-## Render Results, actual matching docs
-<div class="results">
-  #parse("results_list.vm")
-</div>
-
-<div class="pagination">
-  #parse("pagination_bottom.vm")
-</div>

diff --git a/zookeeper/solr/collection1/conf/velocity/cluster.vm b/zookeeper/solr/collection1/conf/velocity/cluster.vm
deleted file mode 100644 (file)
index 4957071..0000000
--- a/zookeeper/solr/collection1/conf/velocity/cluster.vm
+++ /dev/null
@@ -1,19 +0,0 @@
-#**
- *  Check if Clustering is Enabled and then
- *  call cluster_results.vm
- *#
-
-<h2 #annTitle("Clusters generated by Carrot2 using the /clustering RequestHandler")>
-  Clusters
-</h2>
-
-## Div tag has placeholder text by default
-<div id="clusters">
-  Run Solr with java -Dsolr.clustering.enabled=true -jar start.jar to see results
-</div>
-
-## Replace the div content *if* Carrot^2 is available
-<script type="text/javascript">
-  $('#clusters').load("#url_for_solr/clustering#lens",
-    {'wt':'velocity', 'v.template':"cluster_results"});
-</script>

diff --git a/zookeeper/solr/collection1/conf/velocity/cluster_results.vm b/zookeeper/solr/collection1/conf/velocity/cluster_results.vm
deleted file mode 100644 (file)
index 204480d..0000000
--- a/zookeeper/solr/collection1/conf/velocity/cluster_results.vm
+++ /dev/null
@@ -1,31 +0,0 @@
-#**
- *  Actual rendering of Clusters
- *#
-
-## For each cluster
-#foreach ($clusters in $response.response.clusters)
-
-  #set($labels = $clusters.get('labels'))
-  #set($docs = $clusters.get('docs'))
-
-  ## This Cluster's Heading
-  <h3>
-    #foreach ($label in $labels)
-      ## Keep the following line together to prevent
-      ## a space appearing before each comma
-      $label#if( $foreach.hasNext ),#end
-    #end
-  </h3>
-
-  ## This Cluster's Documents
-  <ol>
-    ## For each doc in this cluster
-    #foreach ($cluDoc in $docs)
-      <li>
-        <a href="#url_for_home?q=id:$cluDoc">
-          $cluDoc</a>
-      </li>
-    #end
-  </ol>
-
-#end   ## end for each Cluster

diff --git a/zookeeper/solr/collection1/conf/velocity/debug.vm b/zookeeper/solr/collection1/conf/velocity/debug.vm
deleted file mode 100644 (file)
index 8f6d232..0000000
--- a/zookeeper/solr/collection1/conf/velocity/debug.vm
+++ /dev/null
@@ -1,28 +0,0 @@
-#**
- *  Show Debugging Information, if enabled
- *#
-
-#if( $params.getBool("debugQuery",false) )
-  <a href="#" onclick='jQuery(this).siblings("pre").toggle(); return false;'>
-    toggle explain</a>
-
-  <pre style="display:none">
-    $response.getExplainMap().get($doc.getFirstValue('id'))
-  </pre>
-
-  <a href="#" onclick='jQuery(this).siblings("pre2").toggle(); return false;'>
-    toggle all fields</a>
-
-  <pre2 style="display:none">
-    #foreach($fieldname in $doc.fieldNames)
-      <br>
-        <span class="field-name">$fieldname :</span>
-        <span>
-          #foreach($value in $doc.getFieldValues($fieldname))
-            $esc.html($value)
-          #end
-        </span>
-      </br>
-    #end
-  </pre2>
-#end

diff --git a/zookeeper/solr/collection1/conf/velocity/did_you_mean.vm b/zookeeper/solr/collection1/conf/velocity/did_you_mean.vm
deleted file mode 100644 (file)
index b8faaa5..0000000
--- a/zookeeper/solr/collection1/conf/velocity/did_you_mean.vm
+++ /dev/null
@@ -1,9 +0,0 @@
-#**
- *  Hyperlinked spelling suggestions in results list
- *#
-
-#set($dym = $response.response.spellcheck.suggestions.collation.collationQuery)
-#if($dym)
-  Did you mean
-  <a href="#{url_for_home}#{lensNoQ}&q=$esc.url($dym)">$esc.html($dym)</a>?
-#end

diff --git a/zookeeper/solr/collection1/conf/velocity/error.vm b/zookeeper/solr/collection1/conf/velocity/error.vm
deleted file mode 100644 (file)
index 80b5819..0000000
--- a/zookeeper/solr/collection1/conf/velocity/error.vm
+++ /dev/null
@@ -1,11 +0,0 @@
-#**
- *  Show Error Message, if any
- *#
-
-## Show Error Message, if any
-## Usually rendered inside div class=error
-
-#if( $response.response.error.code )
-  <h1>ERROR $response.response.error.code</h1>
-  $response.response.error.msg
-#end

diff --git a/zookeeper/solr/collection1/conf/velocity/facet_fields.vm b/zookeeper/solr/collection1/conf/velocity/facet_fields.vm
deleted file mode 100644 (file)
index d9db659..0000000
--- a/zookeeper/solr/collection1/conf/velocity/facet_fields.vm
+++ /dev/null
@@ -1,23 +0,0 @@
-#**
- *  Display facets based on field values
- *  e.g.: fields specified by &facet.field=
- *#
-
-#if($response.facetFields)
-  <h2 #annTitle("Facets generated by adding &facet.field= to the request")>
-    Field Facets
-  </h2>
-  #foreach($field in $response.facetFields)
-    ## Hide facets without value
-    #if($field.values.size() > 0)
-      <span class="facet-field">$field.name</span>
-      <ul>
-        #foreach($facet in $field.values)
-          <li>
-            <a href="#url_for_facet_filter($field.name, $facet.name)">$facet.name</a> ($facet.count)
-          </li>
-        #end
-      </ul>
-    #end  ## end if > 0
-  #end    ## end for each facet field
-#end      ## end if response has facet fields

diff --git a/zookeeper/solr/collection1/conf/velocity/facet_pivot.vm b/zookeeper/solr/collection1/conf/velocity/facet_pivot.vm
deleted file mode 100644 (file)
index 7aa50da..0000000
--- a/zookeeper/solr/collection1/conf/velocity/facet_pivot.vm
+++ /dev/null
@@ -1,12 +0,0 @@
-#**
- *  Display Pivot-Based Facets
- *  e.g.: facets specified by &facet.pivot=
- *#
-
-<h2 #annTitle("Facets generated by adding &facet.pivot= to the request")>
-  Pivot Facets
-</h2>
-
-#set($pivot = $response.response.facet_counts.facet_pivot)
-
-#display_facet_pivot($pivot, "")

diff --git a/zookeeper/solr/collection1/conf/velocity/facet_queries.vm b/zookeeper/solr/collection1/conf/velocity/facet_queries.vm
deleted file mode 100644 (file)
index 37489c7..0000000
--- a/zookeeper/solr/collection1/conf/velocity/facet_queries.vm
+++ /dev/null
@@ -1,12 +0,0 @@
-#**
- *  Display facets based on specific facet queries
- *  e.g.: facets specified by &facet.query=
- *#
-
-#set($field = $response.response.facet_counts.facet_queries)
-
-<h2 #annTitle("Facets generated by adding &facet.query= to the request")>
-  Query Facets
-</h2>
-
-#display_facet_query($field, "", "")

diff --git a/zookeeper/solr/collection1/conf/velocity/facet_ranges.vm b/zookeeper/solr/collection1/conf/velocity/facet_ranges.vm
deleted file mode 100644 (file)
index a61084b..0000000
--- a/zookeeper/solr/collection1/conf/velocity/facet_ranges.vm
+++ /dev/null
@@ -1,23 +0,0 @@
-#**
- *  Display facets based on ranges of values, AKA "Bukets"
- *  e.g.: ranges specified by &facet.range=
- *#
-
-<h2 #annTitle("Facets generated by adding &facet.range= to the request")>
-  Range Facets
-</h2>
-
-#foreach ($field in $response.response.facet_counts.facet_ranges)
-  ## Hide facets without value
-  #if($field.value.counts.size() > 0)
-       #set($name = $field.key)
-       #set($display = $name)
-       #set($f = $field.value.counts)
-       #set($start = $field.value.start)
-       #set($end = $field.value.end)
-       #set($gap = $field.value.gap)
-       #set($before = $field.value.before)
-       #set($after = $field.value.after)
-       #display_facet_range($f, $display, $name, $start, $end, $gap, $before, $after)
-  #end  ## end if has any values
-#end    ## end for each facet range

diff --git a/zookeeper/solr/collection1/conf/velocity/facets.vm b/zookeeper/solr/collection1/conf/velocity/facets.vm
deleted file mode 100644 (file)
index 55d40c9..0000000
--- a/zookeeper/solr/collection1/conf/velocity/facets.vm
+++ /dev/null
@@ -1,10 +0,0 @@
-#**
- *  Overall Facet display block
- *  Invokes the 4 facet and 1 cluster template
- *#
-
-#parse('facet_fields.vm')
-#parse('facet_queries.vm')
-#parse('facet_ranges.vm')
-#parse('facet_pivot.vm')
-#parse('cluster.vm')

diff --git a/zookeeper/solr/collection1/conf/velocity/footer.vm b/zookeeper/solr/collection1/conf/velocity/footer.vm
deleted file mode 100644 (file)
index 0604c34..0000000
--- a/zookeeper/solr/collection1/conf/velocity/footer.vm
+++ /dev/null
@@ -1,43 +0,0 @@
-#**
- *  Render the bottom section of the page visible to users
- *#
-
-<hr/>
-<div>
-  <span>Options:</span>
-
-  #if($request.params.get('debugQuery'))
-    <a href="#url_for_home?#q#if($list.size($request.params.getParams('fq')) > 0)&#fqs($request.params.getParams('fq'))#end">
-      disable debug</a>
-  #else
-    <a href="#url_for_lens&debugQuery=true&fl=*,score">
-      enable debug</a>
-  #end
-  -
-  #if($annotate)
-    <a href="#url_for_home?#q#if($list.size($request.params.getParams('fq')) > 0)&#fqs($request.params.getParams('fq'))#end#boostPrice">
-      disable annotation</a>
-  #else
-    <a href="#url_for_lens&annotateBrowse=true">
-      enable annotation</a>
-  #end
-  -
-  <a #annTitle("Click to switch to an XML response: &wt=xml") href="#url_for_lens&wt=xml#if($request.params.get('debugQuery'))&debugQuery=true#end">
-    XML results</a>
-
-</div>
-
-<div>
-  Generated by <a href="http://wiki.apache.org/solr/VelocityResponseWriter">VelocityResponseWriter</a>
-</div>
-<div>
-  <span>Documentation: </span>
-  <a href="http://lucene.apache.org/solr">Solr Home Page</a>, <a href="http://wiki.apache.org/solr">
-    Solr Wiki</a>
-  </div>
-<div>
-  Disclaimer:
-  The locations displayed in this demonstration are purely fictional.
-  It is more than likely that no store with the items listed actually
-  exists at that location!
-</div>

diff --git a/zookeeper/solr/collection1/conf/velocity/head.vm b/zookeeper/solr/collection1/conf/velocity/head.vm
deleted file mode 100644 (file)
index d1f6ee6..0000000
--- a/zookeeper/solr/collection1/conf/velocity/head.vm
+++ /dev/null
@@ -1,35 +0,0 @@
-#**
- *  Provide elements for the <head> section of the HTML document
- *#
-
-  ## An example of using an arbitrary request parameter
-  <title>#param('title')</title>
-  <meta http-equiv="content-type" content="text/html; charset=UTF-8"/>
-
-  <script type="text/javascript" src="#{url_root}/js/lib/jquery-1.7.2.min.js"></script>
-  <link rel="stylesheet" type="text/css" href="#{url_for_solr}/admin/file?file=/velocity/main.css&contentType=text/css"/>
-  <link rel="stylesheet" href="#{url_for_solr}/admin/file?file=/velocity/jquery.autocomplete.css&contentType=text/css" type="text/css" />
-  <script type="text/javascript" src="#{url_for_solr}/admin/file?file=/velocity/jquery.autocomplete.js&contentType=text/javascript"></script>
-
-
-    <script>
-    $(document).ready(function(){
-      $("\#q").autocomplete('#{url_for_solr}/terms', {  ## backslash escaped #q as that is a macro defined in VM_global_library.vm
-           extraParams:{
-             'terms.prefix': function() { return $("\#q").val();},
-             'terms.sort': 'count',
-             'terms.fl': 'name',
-             'wt': 'velocity',
-             'v.template': 'suggest'
-           }
-         }
-      ).keydown(function(e){
-        if (e.keyCode === 13){
-          $("#query-form").trigger('submit');
-        }
-      });
-
-      // http://localhost:8983/solr/collection1/terms?terms.fl=name&terms.prefix=i&terms.sort=count&wt=velocity&v.template=suggest
-    });
-
-    </script>

diff --git a/zookeeper/solr/collection1/conf/velocity/header.vm b/zookeeper/solr/collection1/conf/velocity/header.vm
deleted file mode 100644 (file)
index 6866047..0000000
--- a/zookeeper/solr/collection1/conf/velocity/header.vm
+++ /dev/null
@@ -1,7 +0,0 @@
-#**
- *  Render the top section of the page visible to users
- *#
-
-<div id="head">
-  <span ><a href="#url_for_home#if($request.params.get('debugQuery'))?debugQuery=true#end"><img src="#{url_root}/img/solr.png" id="logo"/></a></span>
-</div>

diff --git a/zookeeper/solr/collection1/conf/velocity/hit.vm b/zookeeper/solr/collection1/conf/velocity/hit.vm
deleted file mode 100644 (file)
index a9c11f4..0000000
--- a/zookeeper/solr/collection1/conf/velocity/hit.vm
+++ /dev/null
@@ -1,25 +0,0 @@
-#**
- *  Called for each matching document but then
- *  calls one of product_doc, join_doc or richtext_doc
- *  depending on which fields the doc has
- *#
-
-#set($docId = $doc.getFieldValue('id'))
-
-<div class="result-document">
-
-  ## Has a "name" field ?
-  #if($doc.getFieldValue('name'))
-    #parse("product_doc.vm")
-
-  ## Has a "compName_s" field ?
-  #elseif($doc.getFieldValue('compName_s'))
-    #parse("join_doc.vm")
-
-  ## Fallback to richtext_doc
-  #else
-    #parse("richtext_doc.vm")
-
-  #end
-
-</div>

diff --git a/zookeeper/solr/collection1/conf/velocity/hit_grouped.vm b/zookeeper/solr/collection1/conf/velocity/hit_grouped.vm
deleted file mode 100644 (file)
index 5297f1e..0000000
--- a/zookeeper/solr/collection1/conf/velocity/hit_grouped.vm
+++ /dev/null
@@ -1,43 +0,0 @@
-#**
- *  Display grouped results
- *#
-
-<div class="result-document">
-
-  <div class="result-title">
-    <b>$grouping.key</b>
-  </div>
-
-  <div>
-    Total Matches in Group: $grouping.value.matches
-  </div>
-
-  <div>  ## list of groups
-
-    #foreach ($group in $grouping.value.groups)
-      <div class="group-value">
-        #if($group.groupValue)$group.groupValue#{else}<i>No group</i>#end
-        <span #annTitle("The count of the number of documents in this group")>
-          ($group.doclist.numFound)
-        </span>
-      </div>
-
-      <div class="group-doclist"
-        #annTitle("Contains the top scoring documents in the group")
-      >
-        #foreach ($doc in $group.doclist)
-          #set($docId = $doc.getFieldValue('id'))
-          #if($doc.getFieldValue('name'))
-            #parse("product_doc.vm")
-          #elseif($doc.getFieldValue('compName_s'))
-            #parse("join_doc.vm")
-          #else
-            #parse("richtext_doc.vm")
-          #end
-        #end
-      </div>
-
-    #end  ## end of foreach group in grouping.value.groups
-  </div>  ## div tag for entire list of groups
-
-</div>  ## end of div class=result-document

diff --git a/zookeeper/solr/collection1/conf/velocity/hit_plain.vm b/zookeeper/solr/collection1/conf/velocity/hit_plain.vm
deleted file mode 100644 (file)
index 193439b..0000000
--- a/zookeeper/solr/collection1/conf/velocity/hit_plain.vm
+++ /dev/null
@@ -1,25 +0,0 @@
-#**
- *  An extremely plain / debug version of hit.vm
- *#
-
-<table>
-  ## For each field
-  #foreach( $fieldName in $doc.fieldNames )
-    ## For each value
-    #foreach( $value in $doc.getFieldValues($fieldName) )
-      <tr>
-        ## Field Name
-        <th align="right" valign="top">
-          #if( $foreach.count == 1 )
-            $fieldName:
-          #end
-        </th>
-        ## Field Value(s)
-        <td align="left" valign="top">
-          $esc.html($value) <br/>
-        </td>
-      </tr>
-    #end     ## end for each value
-  #end       ## end for each field
-</table>
-<hr/>

diff --git a/zookeeper/solr/collection1/conf/velocity/join_doc.vm b/zookeeper/solr/collection1/conf/velocity/join_doc.vm
deleted file mode 100644 (file)
index 9956012..0000000
--- a/zookeeper/solr/collection1/conf/velocity/join_doc.vm
+++ /dev/null
@@ -1,20 +0,0 @@
-#**
- *  Display documents that are joined to other documents
- *#
-
-<div class="result-title">
-  <b>#field('compName_s')</b>
-</div>
-
-<div>
-  Id: #field('id')
-  (company-details document for
-    <a href="http://wiki.apache.org/solr/Join" target="_new">join</a>
-  )
-</div>
-
-<div>
-  Address: #field('address_s')
-</div>
-
-#parse('debug.vm')

diff --git a/zookeeper/solr/collection1/conf/velocity/jquery.autocomplete.css b/zookeeper/solr/collection1/conf/velocity/jquery.autocomplete.css
deleted file mode 100644 (file)
index 91b6228..0000000
--- a/zookeeper/solr/collection1/conf/velocity/jquery.autocomplete.css
+++ /dev/null
@@ -1,48 +0,0 @@
-.ac_results {
-       padding: 0px;
-       border: 1px solid black;
-       background-color: white;
-       overflow: hidden;
-       z-index: 99999;
-}
-
-.ac_results ul {
-       width: 100%;
-       list-style-position: outside;
-       list-style: none;
-       padding: 0;
-       margin: 0;
-}
-
-.ac_results li {
-       margin: 0px;
-       padding: 2px 5px;
-       cursor: default;
-       display: block;
-       /* 
-       if width will be 100% horizontal scrollbar will apear 
-       when scroll mode will be used
-       */
-       /*width: 100%;*/
-       font: menu;
-       font-size: 12px;
-       /* 
-       it is very important, if line-height not setted or setted 
-       in relative units scroll will be broken in firefox
-       */
-       line-height: 16px;
-       overflow: hidden;
-}
-
-.ac_loading {
-       background: white url('indicator.gif') right center no-repeat;
-}
-
-.ac_odd {
-       background-color: #eee;
-}
-
-.ac_over {
-       background-color: #0A246A;
-       color: white;
-}

diff --git a/zookeeper/solr/collection1/conf/velocity/jquery.autocomplete.js b/zookeeper/solr/collection1/conf/velocity/jquery.autocomplete.js
deleted file mode 100644 (file)
index 09bb376..0000000
--- a/zookeeper/solr/collection1/conf/velocity/jquery.autocomplete.js
+++ /dev/null
@@ -1,763 +0,0 @@
-/*
- * Autocomplete - jQuery plugin 1.1pre
- *
- * Copyright (c) 2007 Dylan Verheul, Dan G. Switzer, Anjesh Tuladhar, Jörn Zaefferer
- *
- * Dual licensed under the MIT and GPL licenses:
- *   http://www.opensource.org/licenses/mit-license.php
- *   http://www.gnu.org/licenses/gpl.html
- *
- * Revision: $Id: jquery.autocomplete.js 5785 2008-07-12 10:37:33Z joern.zaefferer $
- *
- */
-
-;(function($) {
-       
-$.fn.extend({
-       autocomplete: function(urlOrData, options) {
-               var isUrl = typeof urlOrData == "string";
-               options = $.extend({}, $.Autocompleter.defaults, {
-                       url: isUrl ? urlOrData : null,
-                       data: isUrl ? null : urlOrData,
-                       delay: isUrl ? $.Autocompleter.defaults.delay : 10,
-                       max: options && !options.scroll ? 10 : 150
-               }, options);
-               
-               // if highlight is set to false, replace it with a do-nothing function
-               options.highlight = options.highlight || function(value) { return value; };
-               
-               // if the formatMatch option is not specified, then use formatItem for backwards compatibility
-               options.formatMatch = options.formatMatch || options.formatItem;
-               
-               return this.each(function() {
-                       new $.Autocompleter(this, options);
-               });
-       },
-       result: function(handler) {
-               return this.bind("result", handler);
-       },
-       search: function(handler) {
-               return this.trigger("search", [handler]);
-       },
-       flushCache: function() {
-               return this.trigger("flushCache");
-       },
-       setOptions: function(options){
-               return this.trigger("setOptions", [options]);
-       },
-       unautocomplete: function() {
-               return this.trigger("unautocomplete");
-       }
-});
-
-$.Autocompleter = function(input, options) {
-
-       var KEY = {
-               UP: 38,
-               DOWN: 40,
-               DEL: 46,
-               TAB: 9,
-               RETURN: 13,
-               ESC: 27,
-               COMMA: 188,
-               PAGEUP: 33,
-               PAGEDOWN: 34,
-               BACKSPACE: 8
-       };
-
-       // Create $ object for input element
-       var $input = $(input).attr("autocomplete", "off").addClass(options.inputClass);
-
-       var timeout;
-       var previousValue = "";
-       var cache = $.Autocompleter.Cache(options);
-       var hasFocus = 0;
-       var lastKeyPressCode;
-       var config = {
-               mouseDownOnSelect: false
-       };
-       var select = $.Autocompleter.Select(options, input, selectCurrent, config);
-       
-       var blockSubmit;
-       
-       // prevent form submit in opera when selecting with return key
-       $.browser.opera && $(input.form).bind("submit.autocomplete", function() {
-               if (blockSubmit) {
-                       blockSubmit = false;
-                       return false;
-               }
-       });
-       
-       // only opera doesn't trigger keydown multiple times while pressed, others don't work with keypress at all
-       $input.bind(($.browser.opera ? "keypress" : "keydown") + ".autocomplete", function(event) {
-               // track last key pressed
-               lastKeyPressCode = event.keyCode;
-               switch(event.keyCode) {
-               
-                       case KEY.UP:
-                               event.preventDefault();
-                               if ( select.visible() ) {
-                                       select.prev();
-                               } else {
-                                       onChange(0, true);
-                               }
-                               break;
-                               
-                       case KEY.DOWN:
-                               event.preventDefault();
-                               if ( select.visible() ) {
-                                       select.next();
-                               } else {
-                                       onChange(0, true);
-                               }
-                               break;
-                               
-                       case KEY.PAGEUP:
-                               event.preventDefault();
-                               if ( select.visible() ) {
-                                       select.pageUp();
-                               } else {
-                                       onChange(0, true);
-                               }
-                               break;
-                               
-                       case KEY.PAGEDOWN:
-                               event.preventDefault();
-                               if ( select.visible() ) {
-                                       select.pageDown();
-                               } else {
-                                       onChange(0, true);
-                               }
-                               break;
-                       
-                       // matches also semicolon
-                       case options.multiple && $.trim(options.multipleSeparator) == "," && KEY.COMMA:
-                       case KEY.TAB:
-                       case KEY.RETURN:
-                               if( selectCurrent() ) {
-                                       // stop default to prevent a form submit, Opera needs special handling
-                                       event.preventDefault();
-                                       blockSubmit = true;
-                                       return false;
-                               }
-                               break;
-                               
-                       case KEY.ESC:
-                               select.hide();
-                               break;
-                               
-                       default:
-                               clearTimeout(timeout);
-                               timeout = setTimeout(onChange, options.delay);
-                               break;
-               }
-       }).focus(function(){
-               // track whether the field has focus, we shouldn't process any
-               // results if the field no longer has focus
-               hasFocus++;
-       }).blur(function() {
-               hasFocus = 0;
-               if (!config.mouseDownOnSelect) {
-                       hideResults();
-               }
-       }).click(function() {
-               // show select when clicking in a focused field
-               if ( hasFocus++ > 1 && !select.visible() ) {
-                       onChange(0, true);
-               }
-       }).bind("search", function() {
-               // TODO why not just specifying both arguments?
-               var fn = (arguments.length > 1) ? arguments[1] : null;
-               function findValueCallback(q, data) {
-                       var result;
-                       if( data && data.length ) {
-                               for (var i=0; i < data.length; i++) {
-                                       if( data[i].result.toLowerCase() == q.toLowerCase() ) {
-                                               result = data[i];
-                                               break;
-                                       }
-                               }
-                       }
-                       if( typeof fn == "function" ) fn(result);
-                       else $input.trigger("result", result && [result.data, result.value]);
-               }
-               $.each(trimWords($input.val()), function(i, value) {
-                       request(value, findValueCallback, findValueCallback);
-               });
-       }).bind("flushCache", function() {
-               cache.flush();
-       }).bind("setOptions", function() {
-               $.extend(options, arguments[1]);
-               // if we've updated the data, repopulate
-               if ( "data" in arguments[1] )
-                       cache.populate();
-       }).bind("unautocomplete", function() {
-               select.unbind();
-               $input.unbind();
-               $(input.form).unbind(".autocomplete");
-       });
-       
-       
-       function selectCurrent() {
-               var selected = select.selected();
-               if( !selected )
-                       return false;
-               
-               var v = selected.result;
-               previousValue = v;
-               
-               if ( options.multiple ) {
-                       var words = trimWords($input.val());
-                       if ( words.length > 1 ) {
-                               v = words.slice(0, words.length - 1).join( options.multipleSeparator ) + options.multipleSeparator + v;
-                       }
-                       v += options.multipleSeparator;
-               }
-               
-               $input.val(v);
-               hideResultsNow();
-               $input.trigger("result", [selected.data, selected.value]);
-               return true;
-       }
-       
-       function onChange(crap, skipPrevCheck) {
-               if( lastKeyPressCode == KEY.DEL ) {
-                       select.hide();
-                       return;
-               }
-               
-               var currentValue = $input.val();
-               
-               if ( !skipPrevCheck && currentValue == previousValue )
-                       return;
-               
-               previousValue = currentValue;
-               
-               currentValue = lastWord(currentValue);
-               if ( currentValue.length >= options.minChars) {
-                       $input.addClass(options.loadingClass);
-                       if (!options.matchCase)
-                               currentValue = currentValue.toLowerCase();
-                       request(currentValue, receiveData, hideResultsNow);
-               } else {
-                       stopLoading();
-                       select.hide();
-               }
-       };
-       
-       function trimWords(value) {
-               if ( !value ) {
-                       return [""];
-               }
-               var words = value.split( options.multipleSeparator );
-               var result = [];
-               $.each(words, function(i, value) {
-                       if ( $.trim(value) )
-                               result[i] = $.trim(value);
-               });
-               return result;
-       }
-       
-       function lastWord(value) {
-               if ( !options.multiple )
-                       return value;
-               var words = trimWords(value);
-               return words[words.length - 1];
-       }
-       
-       // fills in the input box w/the first match (assumed to be the best match)
-       // q: the term entered
-       // sValue: the first matching result
-       function autoFill(q, sValue){
-               // autofill in the complete box w/the first match as long as the user hasn't entered in more data
-               // if the last user key pressed was backspace, don't autofill
-               if( options.autoFill && (lastWord($input.val()).toLowerCase() == q.toLowerCase()) && lastKeyPressCode != KEY.BACKSPACE ) {
-                       // fill in the value (keep the case the user has typed)
-                       $input.val($input.val() + sValue.substring(lastWord(previousValue).length));
-                       // select the portion of the value not typed by the user (so the next character will erase)
-                       $.Autocompleter.Selection(input, previousValue.length, previousValue.length + sValue.length);
-               }
-       };
-
-       function hideResults() {
-               clearTimeout(timeout);
-               timeout = setTimeout(hideResultsNow, 200);
-       };
-
-       function hideResultsNow() {
-               var wasVisible = select.visible();
-               select.hide();
-               clearTimeout(timeout);
-               stopLoading();
-               if (options.mustMatch) {
-                       // call search and run callback
-                       $input.search(
-                               function (result){
-                                       // if no value found, clear the input box
-                                       if( !result ) {
-                                               if (options.multiple) {
-                                                       var words = trimWords($input.val()).slice(0, -1);
-                                                       $input.val( words.join(options.multipleSeparator) + (words.length ? options.multipleSeparator : "") );
-                                               }
-                                               else
-                                                       $input.val( "" );
-                                       }
-                               }
-                       );
-               }
-               if (wasVisible)
-                       // position cursor at end of input field
-                       $.Autocompleter.Selection(input, input.value.length, input.value.length);
-       };
-
-       function receiveData(q, data) {
-               if ( data && data.length && hasFocus ) {
-                       stopLoading();
-                       select.display(data, q);
-                       autoFill(q, data[0].value);
-                       select.show();
-               } else {
-                       hideResultsNow();
-               }
-       };
-
-       function request(term, success, failure) {
-               if (!options.matchCase)
-                       term = term.toLowerCase();
-               var data = cache.load(term);
-               data = null; // Avoid buggy cache and go to Solr every time 
-               // recieve the cached data
-               if (data && data.length) {
-                       success(term, data);
-               // if an AJAX url has been supplied, try loading the data now
-               } else if( (typeof options.url == "string") && (options.url.length > 0) ){
-                       
-                       var extraParams = {
-                               timestamp: +new Date()
-                       };
-                       $.each(options.extraParams, function(key, param) {
-                               extraParams[key] = typeof param == "function" ? param() : param;
-                       });
-                       
-                       $.ajax({
-                               // try to leverage ajaxQueue plugin to abort previous requests
-                               mode: "abort",
-                               // limit abortion to this input
-                               port: "autocomplete" + input.name,
-                               dataType: options.dataType,
-                               url: options.url,
-                               data: $.extend({
-                                       q: lastWord(term),
-                                       limit: options.max
-                               }, extraParams),
-                               success: function(data) {
-                                       var parsed = options.parse && options.parse(data) || parse(data);
-                                       cache.add(term, parsed);
-                                       success(term, parsed);
-                               }
-                       });
-               } else {
-                       // if we have a failure, we need to empty the list -- this prevents the the [TAB] key from selecting the last successful match
-                       select.emptyList();
-                       failure(term);
-               }
-       };
-       
-       function parse(data) {
-               var parsed = [];
-               var rows = data.split("\n");
-               for (var i=0; i < rows.length; i++) {
-                       var row = $.trim(rows[i]);
-                       if (row) {
-                               row = row.split("|");
-                               parsed[parsed.length] = {
-                                       data: row,
-                                       value: row[0],
-                                       result: options.formatResult && options.formatResult(row, row[0]) || row[0]
-                               };
-                       }
-               }
-               return parsed;
-       };
-
-       function stopLoading() {
-               $input.removeClass(options.loadingClass);
-       };
-
-};
-
-$.Autocompleter.defaults = {
-       inputClass: "ac_input",
-       resultsClass: "ac_results",
-       loadingClass: "ac_loading",
-       minChars: 1,
-       delay: 400,
-       matchCase: false,
-       matchSubset: true,
-       matchContains: false,
-       cacheLength: 10,
-       max: 100,
-       mustMatch: false,
-       extraParams: {},
-       selectFirst: false,
-       formatItem: function(row) { return row[0]; },
-       formatMatch: null,
-       autoFill: false,
-       width: 0,
-       multiple: false,
-       multipleSeparator: ", ",
-       highlight: function(value, term) {
-               return value.replace(new RegExp("(?![^&;]+;)(?!<[^<>]*)(" + term.replace(/([\^\$\(\)\[\]\{\}\*\.\+\?\|\\])/gi, "\\$1") + ")(?![^<>]*>)(?![^&;]+;)", "gi"), "<strong>$1</strong>");
-       },
-    scroll: true,
-    scrollHeight: 180
-};
-
-$.Autocompleter.Cache = function(options) {
-
-       var data = {};
-       var length = 0;
-       
-       function matchSubset(s, sub) {
-               if (!options.matchCase) 
-                       s = s.toLowerCase();
-               var i = s.indexOf(sub);
-               if (options.matchContains == "word"){
-                       i = s.toLowerCase().search("\\b" + sub.toLowerCase());
-               }
-               if (i == -1) return false;
-               return i == 0 || options.matchContains;
-       };
-       
-       function add(q, value) {
-               if (length > options.cacheLength){
-                       flush();
-               }
-               if (!data[q]){ 
-                       length++;
-               }
-               data[q] = value;
-       }
-       
-       function populate(){
-               if( !options.data ) return false;
-               // track the matches
-               var stMatchSets = {},
-                       nullData = 0;
-
-               // no url was specified, we need to adjust the cache length to make sure it fits the local data store
-               if( !options.url ) options.cacheLength = 1;
-               
-               // track all options for minChars = 0
-               stMatchSets[""] = [];
-               
-               // loop through the array and create a lookup structure
-               for ( var i = 0, ol = options.data.length; i < ol; i++ ) {
-                       var rawValue = options.data[i];
-                       // if rawValue is a string, make an array otherwise just reference the array
-                       rawValue = (typeof rawValue == "string") ? [rawValue] : rawValue;
-                       
-                       var value = options.formatMatch(rawValue, i+1, options.data.length);
-                       if ( value === false )
-                               continue;
-                               
-                       var firstChar = value.charAt(0).toLowerCase();
-                       // if no lookup array for this character exists, look it up now
-                       if( !stMatchSets[firstChar] ) 
-                               stMatchSets[firstChar] = [];
-
-                       // if the match is a string
-                       var row = {
-                               value: value,
-                               data: rawValue,
-                               result: options.formatResult && options.formatResult(rawValue) || value
-                       };
-                       
-                       // push the current match into the set list
-                       stMatchSets[firstChar].push(row);
-
-                       // keep track of minChars zero items
-                       if ( nullData++ < options.max ) {
-                               stMatchSets[""].push(row);
-                       }
-               };
-
-               // add the data items to the cache
-               $.each(stMatchSets, function(i, value) {
-                       // increase the cache size
-                       options.cacheLength++;
-                       // add to the cache
-                       add(i, value);
-               });
-       }
-       
-       // populate any existing data
-       setTimeout(populate, 25);
-       
-       function flush(){
-               data = {};
-               length = 0;
-       }
-       
-       return {
-               flush: flush,
-               add: add,
-               populate: populate,
-               load: function(q) {
-                       if (!options.cacheLength || !length)
-                               return null;
-                       /* 
-                        * if dealing w/local data and matchContains than we must make sure
-                        * to loop through all the data collections looking for matches
-                        */
-                       if( !options.url && options.matchContains ){
-                               // track all matches
-                               var csub = [];
-                               // loop through all the data grids for matches
-                               for( var k in data ){
-                                       // don't search through the stMatchSets[""] (minChars: 0) cache
-                                       // this prevents duplicates
-                                       if( k.length > 0 ){
-                                               var c = data[k];
-                                               $.each(c, function(i, x) {
-                                                       // if we've got a match, add it to the array
-                                                       if (matchSubset(x.value, q)) {
-                                                               csub.push(x);
-                                                       }
-                                               });
-                                       }
-                               }                               
-                               return csub;
-                       } else 
-                       // if the exact item exists, use it
-                       if (data[q]){
-                               return data[q];
-                       } else
-                       if (options.matchSubset) {
-                               for (var i = q.length - 1; i >= options.minChars; i--) {
-                                       var c = data[q.substr(0, i)];
-                                       if (c) {
-                                               var csub = [];
-                                               $.each(c, function(i, x) {
-                                                       if (matchSubset(x.value, q)) {
-                                                               csub[csub.length] = x;
-                                                       }
-                                               });
-                                               return csub;
-                                       }
-                               }
-                       }
-                       return null;
-               }
-       };
-};
-
-$.Autocompleter.Select = function (options, input, select, config) {
-       var CLASSES = {
-               ACTIVE: "ac_over"
-       };
-       
-       var listItems,
-               active = -1,
-               data,
-               term = "",
-               needsInit = true,
-               element,
-               list;
-       
-       // Create results
-       function init() {
-               if (!needsInit)
-                       return;
-               element = $("<div/>")
-               .hide()
-               .addClass(options.resultsClass)
-               .css("position", "absolute")
-               .appendTo(document.body);
-       
-               list = $("<ul/>").appendTo(element).mouseover( function(event) {
-                       if(target(event).nodeName && target(event).nodeName.toUpperCase() == 'LI') {
-                   active = $("li", list).removeClass(CLASSES.ACTIVE).index(target(event));
-                           $(target(event)).addClass(CLASSES.ACTIVE);            
-               }
-               }).click(function(event) {
-                       $(target(event)).addClass(CLASSES.ACTIVE);
-                       select();
-                       // TODO provide option to avoid setting focus again after selection? useful for cleanup-on-focus
-                       input.focus();
-                       return false;
-               }).mousedown(function() {
-                       config.mouseDownOnSelect = true;
-               }).mouseup(function() {
-                       config.mouseDownOnSelect = false;
-               });
-               
-               if( options.width > 0 )
-                       element.css("width", options.width);
-                       
-               needsInit = false;
-       } 
-       
-       function target(event) {
-               var element = event.target;
-               while(element && element.tagName != "LI")
-                       element = element.parentNode;
-               // more fun with IE, sometimes event.target is empty, just ignore it then
-               if(!element)
-                       return [];
-               return element;
-       }
-
-       function moveSelect(step) {
-               listItems.slice(active, active + 1).removeClass(CLASSES.ACTIVE);
-               movePosition(step);
-        var activeItem = listItems.slice(active, active + 1).addClass(CLASSES.ACTIVE);
-        if(options.scroll) {
-            var offset = 0;
-            listItems.slice(0, active).each(function() {
-                               offset += this.offsetHeight;
-                       });
-            if((offset + activeItem[0].offsetHeight - list.scrollTop()) > list[0].clientHeight) {
-                list.scrollTop(offset + activeItem[0].offsetHeight - list.innerHeight());
-            } else if(offset < list.scrollTop()) {
-                list.scrollTop(offset);
-            }
-        }
-       };
-       
-       function movePosition(step) {
-               active += step;
-               if (active < 0) {
-                       active = listItems.size() - 1;
-               } else if (active >= listItems.size()) {
-                       active = 0;
-               }
-       }
-       
-       function limitNumberOfItems(available) {
-               return options.max && options.max < available
-                       ? options.max
-                       : available;
-       }
-       
-       function fillList() {
-               list.empty();
-               var max = limitNumberOfItems(data.length);
-               for (var i=0; i < max; i++) {
-                       if (!data[i])
-                               continue;
-                       var formatted = options.formatItem(data[i].data, i+1, max, data[i].value, term);
-                       if ( formatted === false )
-                               continue;
-                       var li = $("<li/>").html( options.highlight(formatted, term) ).addClass(i%2 == 0 ? "ac_even" : "ac_odd").appendTo(list)[0];
-                       $.data(li, "ac_data", data[i]);
-               }
-               listItems = list.find("li");
-               if ( options.selectFirst ) {
-                       listItems.slice(0, 1).addClass(CLASSES.ACTIVE);
-                       active = 0;
-               }
-               // apply bgiframe if available
-               if ( $.fn.bgiframe )
-                       list.bgiframe();
-       }
-       
-       return {
-               display: function(d, q) {
-                       init();
-                       data = d;
-                       term = q;
-                       fillList();
-               },
-               next: function() {
-                       moveSelect(1);
-               },
-               prev: function() {
-                       moveSelect(-1);
-               },
-               pageUp: function() {
-                       if (active != 0 && active - 8 < 0) {
-                               moveSelect( -active );
-                       } else {
-                               moveSelect(-8);
-                       }
-               },
-               pageDown: function() {
-                       if (active != listItems.size() - 1 && active + 8 > listItems.size()) {
-                               moveSelect( listItems.size() - 1 - active );
-                       } else {
-                               moveSelect(8);
-                       }
-               },
-               hide: function() {
-                       element && element.hide();
-                       listItems && listItems.removeClass(CLASSES.ACTIVE);
-                       active = -1;
-               },
-               visible : function() {
-                       return element && element.is(":visible");
-               },
-               current: function() {
-                       return this.visible() && (listItems.filter("." + CLASSES.ACTIVE)[0] || options.selectFirst && listItems[0]);
-               },
-               show: function() {
-                       var offset = $(input).offset();
-                       element.css({
-                               width: typeof options.width == "string" || options.width > 0 ? options.width : $(input).width(),
-                               top: offset.top + input.offsetHeight,
-                               left: offset.left
-                       }).show();
-            if(options.scroll) {
-                list.scrollTop(0);
-                list.css({
-                                       maxHeight: options.scrollHeight,
-                                       overflow: 'auto'
-                               });
-                               
-                if($.browser.msie && typeof document.body.style.maxHeight === "undefined") {
-                                       var listHeight = 0;
-                                       listItems.each(function() {
-                                               listHeight += this.offsetHeight;
-                                       });
-                                       var scrollbarsVisible = listHeight > options.scrollHeight;
-                    list.css('height', scrollbarsVisible ? options.scrollHeight : listHeight );
-                                       if (!scrollbarsVisible) {
-                                               // IE doesn't recalculate width when scrollbar disappears
-                                               listItems.width( list.width() - parseInt(listItems.css("padding-left")) - parseInt(listItems.css("padding-right")) );
-                                       }
-                }
-                
-            }
-               },
-               selected: function() {
-                       var selected = listItems && listItems.filter("." + CLASSES.ACTIVE).removeClass(CLASSES.ACTIVE);
-                       return selected && selected.length && $.data(selected[0], "ac_data");
-               },
-               emptyList: function (){
-                       list && list.empty();
-               },
-               unbind: function() {
-                       element && element.remove();
-               }
-       };
-};
-
-$.Autocompleter.Selection = function(field, start, end) {
-       if( field.createTextRange ){
-               var selRange = field.createTextRange();
-               selRange.collapse(true);
-               selRange.moveStart("character", start);
-               selRange.moveEnd("character", end);
-               selRange.select();
-       } else if( field.setSelectionRange ){
-               field.setSelectionRange(start, end);
-       } else {
-               if( field.selectionStart ){
-                       field.selectionStart = start;
-                       field.selectionEnd = end;
-               }
-       }
-       field.focus();
-};
-
-})(jQuery);
\ No newline at end of file

diff --git a/zookeeper/solr/collection1/conf/velocity/layout.vm b/zookeeper/solr/collection1/conf/velocity/layout.vm
deleted file mode 100644 (file)
index 50f4c1b..0000000
--- a/zookeeper/solr/collection1/conf/velocity/layout.vm
+++ /dev/null
@@ -1,24 +0,0 @@
-#**
- *  Overall HTML page layout
- *#
-
-<html>
-<head>
-  #parse("head.vm")
-</head>
-  <body>
-    <div id="admin"><a href="#url_root/#/#core_name">Solr Admin</a></div>
-    <div id="header">
-      #parse("header.vm")
-    </div>
-    <div id="tabs">
-      #parse("tabs.vm")
-    </div>
-    <div id="content">
-      $content
-    </div>
-    <div id="footer">
-      #parse("footer.vm")
-    </div>
-  </body>
-</html>

diff --git a/zookeeper/solr/collection1/conf/velocity/main.css b/zookeeper/solr/collection1/conf/velocity/main.css
deleted file mode 100644 (file)
index 0aed533..0000000
--- a/zookeeper/solr/collection1/conf/velocity/main.css
+++ /dev/null
@@ -1,230 +0,0 @@
-#admin{
-  text-align: right;
-  vertical-align: top; 
-}
-
-#head{
-  width: 100%;
-}
-.array-field {
-  border: 2px solid #474747;
-  background: #FFE9D8;
-  padding: 5px;
-  margin: 5px;
-}
-
-.array-field-list li {
-  list-style: circle;
-  margin-left: 20px;
-}
-
-.parsed_query_header {
-  font-family: Helvetica, Arial, sans-serif;
-  font-size: 10pt;
-  font-weight: bold;
-}
-
-.parsed_query {
-  font-family: Courier, Courier New, monospaced;
-  font-size: 10pt;
-  font-weight: normal;
-}
-
-body {
-  font-family: Helvetica, Arial, sans-serif;
-  font-size: 10pt;
-}
-
-a {
-  color: #43a4b1;
-}
-
-.navigators {
-  float: left;
-  margin: 5px;
-  margin-top: 0px;
-  width: 185px;
-  padding: 5px;
-  top: -20px;
-  position: relative;  
-}
-
-.tabs-bar {
-  padding: 5px;
-  width: 100%;
-  border: 1px solid;
-  border-width: 0px 0px 1px 0px;
-}
-.tab {
-  font-weight: bold;
-  padding: 5px;
-  margin: 0px 5px;
-  border: 1px solid;
-  background-color: #dddddd;
-  border-top-left-radius: 4px;
-  border-top-right-radius: 4px;
-}
-.tab:hover {
-  background: #FEC293;
-}
-.tab.selected {
-  background-color: #ffffff;
-  border-bottom: 1px solid #ffffff;
-}
-
-.navigators h2 {
-  background: #FEC293;
-  padding: 2px 5px;
-}
-
-.navigators ul {
-  list-style: none;
-  margin: 0;
-  margin-bottom: 5px;
-  margin-top: 5px;
-  padding-left: 10px;
-}
-
-.navigators ul li {
-  color: #999;
-  padding: 2px;
-}
-
-
-
-.facet-field {
-  font-weight: bold;
-}
-
-.highlight {
-  color: white;
-  background-color: gray;
-  border: 1px black solid;
-}
-
-.highlight-box {
-  margin-left: 15px;
-}
-
-.field-name {
-  font-weight: bold;
-}
-
-.highlighted-facet-field {
-  background: white;
-}
-
-.constraints {
-  margin-top: 10px;
-}
-
-#query-form{
-  width: 80%;
-}
-
-
-
-.query-box, .constraints {
-  padding: 5px;
-  margin: 5px;
-  font-weight: normal;
-  font-size: 24px;
-  letter-spacing: 0.08em;
-}
-
-.query-box #q {
-  margin-left: 8px;
-  width: 60%;
-  height: 50px;
-  border: 1px solid #999;
-  font-size: 1em;
-  padding: 0.4em;
-}
-
-.query-box {
-  
-}
-
-.query-boost {
-  
-  top: 10px;
-  left: 50px;
-  position: relative;
-  font-size: 0.8em;
-}
-
-.query-box .inputs{
-  left: 180px;
-  position: relative;
-  
-}
-
-#logo {
-  margin: 10px;
-  border-style: none;
-}
-
-.pagination {
-  padding-left: 33%;
-  background: #eee;
-  margin: 5px;
-  margin-left: 210px;
-  padding-top: 5px;
-  padding-bottom: 5px;
-}
-
-.result-document {
-  border: 1px solid #999;
-  padding: 5px;
-  margin: 5px;
-  margin-left: 210px;
-  margin-bottom: 15px;
-}
-
-.result-document div{
-  padding: 5px;
-}
-
-.result-title{
-  width:60%;
-}
-
-.result-body{
-  background: #ddd;
-}
-
-.mlt{
-  
-}
-
-.map{
-  float: right;
-  position: relative;
-  top: -25px;  
-}
-
-.result-document:nth-child(2n+1) {
-  background-color: #eee;
-}
-
-
-.selected-facet-field {
-  font-weight: bold;
-}
-
-li.show {
-  list-style: disc;
-}
-
-.group-value{
-  font-weight: bold;
-}
-
-.error {
-  color: white;
-  background-color: red;
-  left: 210px;
-  width:80%;
-  position: relative;
-
-}

diff --git a/zookeeper/solr/collection1/conf/velocity/mime_type_lists.vm b/zookeeper/solr/collection1/conf/velocity/mime_type_lists.vm
deleted file mode 100644 (file)
index 1468bbd..0000000
--- a/zookeeper/solr/collection1/conf/velocity/mime_type_lists.vm
+++ /dev/null
@@ -1,68 +0,0 @@
-#**
- *  Define some Mime-Types, short and long form
- *#
-
-## MimeType to extension map for detecting file type
-## and showing proper icon
-## List of types match the icons in /solr/img/filetypes
-
-## Short MimeType Names
-## Was called $supportedtypes
-#set($supportedMimeTypes = "7z;ai;aiff;asc;audio;bin;bz2;c;cfc;cfm;chm;class;conf;cpp;cs;css;csv;deb;divx;doc;dot;eml;enc;file;gif;gz;hlp;htm;html;image;iso;jar;java;jpeg;jpg;js;lua;m;mm;mov;mp3;mpg;odc;odf;odg;odi;odp;ods;odt;ogg;pdf;pgp;php;pl;png;ppt;ps;py;ram;rar;rb;rm;rpm;rtf;sig;sql;swf;sxc;sxd;sxi;sxw;tar;tex;tgz;txt;vcf;video;vsd;wav;wma;wmv;xls;xml;xpi;xvid;zip")
-
-## Long Form: map MimeType headers to our Short names
-## Was called $extMap
-#set( $mimeExtensionsMap = {
-   "application/x-7z-compressed": "7z",
-   "application/postscript": "ai",
-   "application/pgp-signature": "asc",
-   "application/octet-stream": "bin",
-   "application/x-bzip2": "bz2",
-   "text/x-c": "c",
-   "application/vnd.ms-htmlhelp": "chm",
-   "application/java-vm": "class",
-   "text/css": "css",
-   "text/csv": "csv",
-   "application/x-debian-package": "deb",
-   "application/msword": "doc",
-   "message/rfc822": "eml",
-   "image/gif": "gif",
-   "application/winhlp": "hlp",
-   "text/html": "html",
-   "application/java-archive": "jar",
-   "text/x-java-source": "java",
-   "image/jpeg": "jpeg",
-   "application/javascript": "js",
-   "application/vnd.oasis.opendocument.chart": "odc",
-   "application/vnd.oasis.opendocument.formula": "odf",
-   "application/vnd.oasis.opendocument.graphics": "odg",
-   "application/vnd.oasis.opendocument.image": "odi",
-   "application/vnd.oasis.opendocument.presentation": "odp",
-   "application/vnd.oasis.opendocument.spreadsheet": "ods",
-   "application/vnd.oasis.opendocument.text": "odt",
-   "application/pdf": "pdf",
-   "application/pgp-encrypted": "pgp",
-   "image/png": "png",
-   "application/vnd.ms-powerpoint": "ppt",
-   "audio/x-pn-realaudio": "ram",
-   "application/x-rar-compressed": "rar",
-   "application/vnd.rn-realmedia": "rm",
-   "application/rtf": "rtf",
-   "application/x-shockwave-flash": "swf",
-   "application/vnd.sun.xml.calc": "sxc",
-   "application/vnd.sun.xml.draw": "sxd",
-   "application/vnd.sun.xml.impress": "sxi",
-   "application/vnd.sun.xml.writer": "sxw",
-   "application/x-tar": "tar",
-   "application/x-tex": "tex",
-   "text/plain": "txt",
-   "text/x-vcard": "vcf",
-   "application/vnd.visio": "vsd",
-   "audio/x-wav": "wav",
-   "audio/x-ms-wma": "wma",
-   "video/x-ms-wmv": "wmv",
-   "application/vnd.ms-excel": "xls",
-   "application/xml": "xml",
-   "application/x-xpinstall": "xpi",
-   "application/zip": "zip"
-})

diff --git a/zookeeper/solr/collection1/conf/velocity/pagination_bottom.vm b/zookeeper/solr/collection1/conf/velocity/pagination_bottom.vm
deleted file mode 100644 (file)
index 71b8bdf..0000000
--- a/zookeeper/solr/collection1/conf/velocity/pagination_bottom.vm
+++ /dev/null
@@ -1,22 +0,0 @@
-#**
- *  Paging and Statistics at bottom of results
- *#
-
-## Usually rendered in pagination div tag
-
-#if($response.response.get('grouped'))
-  ## pass
-#else
-
-  #link_to_previous_page("previous")
-
-  <span class="results-found">$page.results_found</span>
-  results found.
-
-  Page <span class="page-num">$page.current_page_number</span>
-    of <span class="page-count">$page.page_count</span>
-
-  #link_to_next_page("next")
-
-#end
-<br/>

diff --git a/zookeeper/solr/collection1/conf/velocity/pagination_top.vm b/zookeeper/solr/collection1/conf/velocity/pagination_top.vm
deleted file mode 100644 (file)
index e0ac8ac..0000000
--- a/zookeeper/solr/collection1/conf/velocity/pagination_top.vm
+++ /dev/null
@@ -1,29 +0,0 @@
-#**
- *  Paging and Statistics at top of results
- *#
-
-## Usually rendered in pagination div tag
-
-## Grouped Results / Not Paginated
-#if($response.response.get('grouped'))
-
-  <span>
-    <span class="results-found">
-      $response.response.get('grouped').size() group(s)
-    </span>
-    found in ${response.responseHeader.QTime} ms
-  </span>
-
-## Regular Results / Use Paging Links if needed
-#else
-
-  <span>
-    <span class="results-found">$page.results_found</span>
-    results found in
-    ${response.responseHeader.QTime} ms
-  </span>
-
-  Page <span class="page-num">$page.current_page_number</span>
-    of <span class="page-count">$page.page_count</span>
-
-#end   ## end else non-grouped results, normal pagination

diff --git a/zookeeper/solr/collection1/conf/velocity/product_doc.vm b/zookeeper/solr/collection1/conf/velocity/product_doc.vm
deleted file mode 100644 (file)
index c878d8c..0000000
--- a/zookeeper/solr/collection1/conf/velocity/product_doc.vm
+++ /dev/null
@@ -1,32 +0,0 @@
-#**
- *  Render a hit representing a Product
- *  assumed to have a field called "name"
- *#
-
-<div class="result-title"><b>#field('name')</b><span class="mlt">   #if($params.getBool('mlt', false) == false)<a href="#lensNoQ&q=id:$docId&mlt=true">More Like This</a>#end</span></div>
-##do we have a physical store for this product
-#set($store = $doc.getFieldValue('store'))
-#if($store)<div class="map"><img src="http://maps.google.com/maps/api/staticmap?&zoom=12&size=150x80&maptype=roadmap&markers=$doc.getFieldValue('store')&sensor=false" /><div><small><a target="_map" href="http://maps.google.com/?q=$store&amp;source=embed">Larger Map</a></small></div></div>#end
-<div>Id: #field('id')</div>
-<div>Price: #field('price_c')</div>
-<div>Features: #field('features')</div>
-<div>In Stock: #field('inStock')</div>
-<div class="mlt">
-  #set($mlt = $mltResults.get($docId))
-  #set($mltOn = $params.getBool('mlt'))
-  #if($mltOn == true)<div class="field-name">Similar Items</div>#end
-  #if ($mltOn && $mlt && $mlt.size() > 0)
-  <ul>
-    #foreach($mltHit in $mlt)
-      #set($mltId = $mltHit.getFieldValue('id'))
-      <li><div><a href="#url_for_home?q=id:$mltId">$mltId</a></div><div><span class="field-name">Name:</span> $mltHit.getFieldValue('name')</div>
-        <div><span class="field-name">Price:</span> $!number.currency($mltHit.getFieldValue('price')) <span class="field-name">In Stock:</span> $mltHit.getFieldValue('inStock')</div>
-
-      </li>
-    #end
-  </ul>
-  #elseif($mltOn && $mlt.size() == 0)
-    <div>No Similar Items Found</div>
-  #end
-</div>
-#parse('debug.vm')

diff --git a/zookeeper/solr/collection1/conf/velocity/query.vm b/zookeeper/solr/collection1/conf/velocity/query.vm
deleted file mode 100644 (file)
index ddbab3f..0000000
--- a/zookeeper/solr/collection1/conf/velocity/query.vm
+++ /dev/null
@@ -1,42 +0,0 @@
-<div class="query-box">
-  <form id="query-form" action="#{url_for_home}" method="GET">
-    <div class="inputs">
-      <span #annTitle("Add the query using the &q= parameter")>Find: <input type="text" id="q" name="q" value="$!esc.html($params.get('q'))"/> <input type="submit" id="querySubmit"/> <input type="reset"/></span>
-      <div class="query-boost"><span #annTitle("Add the boost function &bf=price to the query")><input type="checkbox" name="bf" value="price" #if($request.params.get('bf') == 'price')checked="true"#end>Boost by Price</input></span>
-      #parse("querySpatial.vm")
-      #parse("queryGroup.vm")
-      </div>
-  </div>
-
-    #if($request.params.get('debugQuery'))
-      <input type="hidden" name="debugQuery" value="true"/>
-    #end
-    #if($annotate == true)
-      <input type="hidden" name="annotateBrowse" value="true"/>
-    #end
-    #foreach($fq in $request.params.getParams('fq'))
-      #if ($fq != "{!bbox}")
-        <input type="hidden" name="fq" id="allFQs" value="$esc.html($fq)"/>
-      #end
-    #end
-    <div class="constraints" #annTitle("Lists out the &fq filters.  Click to remove.")>
-      #foreach($fq in $params.getParams('fq'))
-        #set($previous_fq_count=$velocityCount - 1)
-        #if($fq != '')
-        &gt; <a style="{text-decoration: line-through;}" href="#url_for_filters($request.params.getParams('fq').subList(0,$previous_fq_count))">$fq</a>
-        #end
-      #end
-    </div>
-    <div class="parsed_query_header">
-     #if($request.params.get('debugQuery'))
-        <a href="#" onclick='jQuery(this).siblings("div").toggle(); return false;'>toggle parsed query</a>
-        <div class="parsed_query" style="display:none">$response.response.debug.parsedquery</div>
-      #end
-      #set($queryOpts = $request.params.get("queryOpts"))
-      #if($queryOpts && $queryOpts != "")
-        <input type="hidden" name="queryOpts" value="$queryOpts"/>
-      #end
-    </div>
-  </form>
-
-</div>

diff --git a/zookeeper/solr/collection1/conf/velocity/query_form.vm b/zookeeper/solr/collection1/conf/velocity/query_form.vm
deleted file mode 100644 (file)
index 70a0af2..0000000
--- a/zookeeper/solr/collection1/conf/velocity/query_form.vm
+++ /dev/null
@@ -1,64 +0,0 @@
-#**
- *  Renders the main query form
- *#
-
-<div class="query-box">
-  <form id="query-form" action="#{url_for_home}" method="GET">
-
-    <div class="inputs">
-      <span #annTitle("Add the query using the &q= parameter")>
-        Find:
-        <input type="text" id="q" name="q" value="$!esc.html($params.get('q'))"/>
-        <input type="submit" id="querySubmit"/>
-        <input type="reset"/>
-      </span>
-      <div class="query-boost">
-        <span #annTitle("Add the boost function &bf=price to the query")>
-          <input type="checkbox" name="bf" value="price"
-            #if($request.params.get('bf') == 'price')checked="true"#end
-          >
-            Boost by Price
-          </input>
-        </span>
-      #parse("query_spatial.vm")
-      #parse("query_group.vm")
-      </div>
-  </div>
-
-    #if($request.params.get('debugQuery'))
-      <input type="hidden" name="debugQuery" value="true"/>
-    #end
-    #if($annotate == true)
-      <input type="hidden" name="annotateBrowse" value="true"/>
-    #end
-    #foreach($fq in $request.params.getParams('fq'))
-      #if ($fq != "{!bbox}")
-        <input type="hidden" name="fq" id="allFQs" value="$esc.html($fq)"/>
-      #end
-    #end
-
-    <div class="constraints" #annTitle("Lists out the &fq filters.  Click to remove.")>
-      #foreach($fq in $params.getParams('fq'))
-        #set($previous_fq_count=$velocityCount - 1)
-        #if($fq != '')
-          &gt;
-          <a style="{text-decoration: line-through;}"
-            href="#url_for_filters($request.params.getParams('fq').subList(0,$previous_fq_count))"
-          >$fq</a>
-        #end
-      #end
-    </div>
-
-    <div class="parsed_query_header">
-      #if($request.params.get('debugQuery'))
-        <a href="#" onclick='jQuery(this).siblings("div").toggle(); return false;'>toggle parsed query</a>
-        <div class="parsed_query" style="display:none">$response.response.debug.parsedquery</div>
-      #end
-      #set($queryOpts = $request.params.get("queryOpts"))
-      #if($queryOpts && $queryOpts != "")
-        <input type="hidden" name="queryOpts" value="$queryOpts"/>
-      #end
-    </div>
-
-  </form>
-</div>

diff --git a/zookeeper/solr/collection1/conf/velocity/query_group.vm b/zookeeper/solr/collection1/conf/velocity/query_group.vm
deleted file mode 100644 (file)
index 42e5457..0000000
--- a/zookeeper/solr/collection1/conf/velocity/query_group.vm
+++ /dev/null
@@ -1,43 +0,0 @@
-#**
- *  Query settings for grouping by fields,
- *  e.g.: Manufacturer or Popularity
- *#
-
-#set($queryOpts = $params.get("queryOpts"))
-
-#if($queryOpts == "group")
-  <div>
-    #set($groupF = $request.params.get('group.field'))
-
-    <label #annTitle("Add the &group.field parameter. Multiselect is supported")>
-      Group By:
-      <select id="group" name="group.field" multiple="true">
-        ## TODO: Handle multiple selects correctly
-        ## TODO: fix empty / "No Group" selection
-
-        <option value=""
-          #if($groupF == '')selected="true"#end
-        >
-          No Group
-        </option>
-
-        <option value="manu_exact"
-          #if($groupF == 'manu_exact')selected="true"#end
-        >
-          Manufacturer
-        </option>
-
-        <option value="popularity"
-          #if($groupF == 'popularity')selected="true"#end
-        >
-          Popularity
-        </option>
-
-      </select>
-    </label>  
-
-    <input type="hidden" name="group" value="true"/>
-
-  </div>
-
-#end

diff --git a/zookeeper/solr/collection1/conf/velocity/query_spatial.vm b/zookeeper/solr/collection1/conf/velocity/query_spatial.vm
deleted file mode 100644 (file)
index 2bc2044..0000000
--- a/zookeeper/solr/collection1/conf/velocity/query_spatial.vm
+++ /dev/null
@@ -1,75 +0,0 @@
-#**
- *  Query logic for selecting location / Geospatial search
- *#
-
-#set($queryOpts = $params.get("queryOpts"))
-
-#if($queryOpts == "spatial")
-
-  <div>
-
-    #set($loc = $request.params.get('pt'))
-    ## Normalize first trip through to "none" because
-    ## an empty string generates an error message later on
-    #if( ! $loc )
-      #set( $loc = "none" )
-    #end
-
-    #set($dist = $request.params.get('d', "10"))
-
-    ## Cities for The Select List
-    #set( $cities = {
-      "none": "No Filter",
-      "45.17614,-93.87341": "Buffalo, MN",
-      "37.7752,-100.0232": "Dodge City, KS",
-      "35.0752,-97.032": "Oklahoma City, OK",
-      "37.7752,-122.4232": "San Francisco CA"
-    })
-
-    <label #annTitle("Add the &pt parameter")>
-      Location Filter:
-      <select id="pt" name="pt">
-
-        ## Generate <option> tag for each city
-        #foreach( $city_lon_lat in $cities.keySet() )
-          #set( $city_name = $cities.get($city_lon_lat) )
-          <option value="$city_lon_lat"
-            #if($loc == $city_lon_lat)selected="true"#end
-          >
-            $city_name
-          </option>
-        #end
-
-      </select>
-
-    </label>
-
-    <span #annTitle("Add the &d parameter")>
-      Distance (KM):
-      <input id="d" name="d" type="text" size="6"
-        value="#if($dist != '')${dist}#{else}10#end"  ## TODO: isn't the default of 10 above sufficient?  no if/else needed?
-      />
-    </span>
-
-    <input type="hidden" name="sfield" value="store"/>
-    <input type="hidden" id="spatialFQ" name="fq" value=""/>
-    <input type="hidden" name="queryOpts" value="spatial"/>        
-
-  </div>
-
-  <script type="text/javascript">
-    $('#query-form').submit(function() {
-      if ($("#pt").val() != "none") {
-        $("#spatialFQ").val("{!bbox}");
-      }
-      $fqs = $("#allFQs").val();
-      $fqs = $fqs.replace("{!bbox}", "");
-      if ($fqs == ''){
-        $("#allFQs").remove();
-      }
-      $("#allFQs").val($fqs);
-      return true;
-    });
-  </script>
-
-#end

diff --git a/zookeeper/solr/collection1/conf/velocity/results_list.vm b/zookeeper/solr/collection1/conf/velocity/results_list.vm
deleted file mode 100644 (file)
index f73532b..0000000
--- a/zookeeper/solr/collection1/conf/velocity/results_list.vm
+++ /dev/null
@@ -1,22 +0,0 @@
-#**
- *  Render the main Results List
- *#
-
-## Usually displayed inside <div class="results">
-
-#if($response.response.get('grouped'))
-
-  #foreach($grouping in $response.response.get('grouped'))
-    #parse("hit_grouped.vm")
-  #end
-
-#else
-
-  #foreach($doc in $response.results)
-    #parse("hit.vm")
-    ## Can get an extremely simple view of the doc
-    ## which might be nicer for debugging
-    ##parse("hit_plain.vm")
-  #end
-
-#end

diff --git a/zookeeper/solr/collection1/conf/velocity/richtext_doc.vm b/zookeeper/solr/collection1/conf/velocity/richtext_doc.vm
deleted file mode 100644 (file)
index 9e8d6cb..0000000
--- a/zookeeper/solr/collection1/conf/velocity/richtext_doc.vm
+++ /dev/null
@@ -1,153 +0,0 @@
-#**
- *  Render a complex document in the results list
- *#
-
-## Load Mime-Type List and Mapping
-#parse('mime_type_lists.vm')
-## Sets:
-## * supportedMimeTypes, AKA supportedtypes
-## * mimeExtensionsMap, AKA extMap
-
-## Title
-#if($doc.getFieldValue('title'))
-  #set($title = $esc.html($doc.getFirstValue('title')))
-#else
-  #set($title = "["+$doc.getFieldValue('id')+"]")
-#end
-
-## URL
-#if($doc.getFieldValue('url'))
-  #set($url = $doc.getFieldValue('url'))
-#elseif($doc.getFieldValue('resourcename'))
-  #set($url = "file:///$doc.getFieldValue('resourcename')")
-#else
-  #set($url = "$doc.getFieldValue('id')")
-#end
-
-## Sort out Mime-Type
-#set($ct = $list.get($doc.getFirstValue('content_type').split(";"),0))
-#set($filename = $doc.getFieldValue('resourcename'))
-#set($filetype = false)
-#set($filetype = $mimeExtensionsMap.get($ct))
-
-## TODO: falling back to file extension is convenient,
-## except when you don't have an icon for that extension
-## example "application/vnd.openxmlformats-officedocument.wordprocessingml.document"
-## document with a .docx extension.
-## It'd be nice to fall back to an "unknown" or the existing "file" type
-## We sort of do this below, but only if the filename has no extension
-## (anything after the last dot).
-
-#if(!$filetype)
-  #set($filetype = $filename.substring($filename.lastIndexOf(".")).substring(1))
-#end
-
-## #if(!$filetype)
-##   #set($filetype = "file")
-## #end
-## #if(!$supportedMimeTypes.contains($filetype))
-##   #set($filetype = "file")
-## #end
-
-## Row 1: Icon and Title and mlt link
-<div class="result-title">
-  ## Icon
-  ## Small file type icons from http://www.splitbrain.org/projects/file_icons (public domain)
-  <img src="#{url_root}/img/filetypes/${filetype}.png" align="center">
-
-  ## Title, hyperlinked
-  <a href="${url}" target="_blank">
-    <b>$title</b></a>
-
-  ## Link for MLT / More Like This / Find Similar
-  <span class="mlt">
-    #if($params.getBool('mlt', false) == false)
-      <a href="#lensNoQ&q=id:%22$docId%22&mlt=true">
-        More Like This</a>
-    #end
-  </span>
-
-</div>
-
-## Row 2?: ID / URL
-<div>
-  Id: #field('id')
-</div>
-
-## Resource Name
-<div>
-  #if($doc.getFieldValue('resourcename'))
-    Resource name: $filename 
-  #elseif($url)
-    URL: $url
-  #end
-  #if($ct)
-    ($ct)
-  #end
-</div>
-
-## Author
-#if($doc.getFieldValue('author'))
-  <div>
-    Author: #field('author')
-  </div>
-#end
-
-## Last_Modified Date
-#if($doc.getFieldValue('last_modified'))
-  <div>
-    last-modified:
-    #field('last_modified')
-  </div>
-#end
-
-## Main content of doc
-<div class="result-body">
-  #field('content')
-</div>
-
-## Display Similar Documents / MLT = More Like This
-<div class="mlt">
-  #set($mlt = $mltResults.get($docId))
-  #set($mltOn = $params.getBool('mlt'))
-  #if($mltOn == true)
-    <div class="field-name">
-      Similar Items
-    </div>
-  #end
-  ## If has MLT enabled An Entries to show
-  #if ($mltOn && $mlt && $mlt.size() > 0)
-    <ul>
-      #foreach($mltHit in $mlt)
-        #set($mltId = $mltHit.getFieldValue('id'))
-        <li>
-          <div>
-            <a href="#url_for_home?q=id:$mltId">
-              $mltId</a>
-          </div>
-          <div>
-            <span class="field-name">
-              Title:
-            </span>
-            $mltHit.getFieldValue('title')
-          </div>
-          <div>
-            <span class="field-name">
-              Author:
-            </span>
-            $mltHit.getFieldValue('author')
-            <span class="field-name">
-              Description:
-            </span>
-            $mltHit.getFieldValue('description')
-          </div>
-        </li>
-      #end    ## end for each mltHit in $mlt
-    </ul>
-  ## Else MLT Enabled but no mlt results for this query
-  #elseif($mltOn && $mlt.size() == 0)
-    <div>No Similar Items Found</div>
-  #end
-</div>  ## div class=mlt
-
-#parse('debug.vm')

diff --git a/zookeeper/solr/collection1/conf/velocity/suggest.vm b/zookeeper/solr/collection1/conf/velocity/suggest.vm
deleted file mode 100644 (file)
index dae6b83..0000000
--- a/zookeeper/solr/collection1/conf/velocity/suggest.vm
+++ /dev/null
@@ -1,8 +0,0 @@
-#**
- *  Provides cynamic spelling suggestions
- *  as you type in the search form
- *#
-
-#foreach($t in $response.response.terms.name)
-  $t.key
-#end

diff --git a/zookeeper/solr/collection1/conf/velocity/tabs.vm b/zookeeper/solr/collection1/conf/velocity/tabs.vm
deleted file mode 100644 (file)
index da19cbc..0000000
--- a/zookeeper/solr/collection1/conf/velocity/tabs.vm
+++ /dev/null
@@ -1,50 +0,0 @@
-#**
- *  Provides navigation/access to Advanced search options
- *  Usually displayed near the top of the page
- *#
-
-##TODO: Make some nice tabs here
-
-#set($queryOpts = $params.get("queryOpts"))
-
-<div class="tabs-bar" #annTitle("Click the link to demonstrate various Solr capabilities")>
-
-  <span>Type of Search:</span>
-
-  ##queryOpts=$queryOpts
-
-  ## return to Simple Search
-  ##set( $selected = ($queryOpts && $queryOpts != "") )
-  #set( $selected = ! $queryOpts )
-  <span class="tab #if($selected)selected#end">
-    #if($selected)
-      Simple
-    #else
-      <a href="#url_for_home/?#debug#annotate">
-        Simple</a>
-    #end
-  </span>
-
-  ## GEO-Spatial / Location Based
-  #set( $selected = ($queryOpts == "spatial") )
-  <span class="tab #if($selected)selected#end">
-    #if($selected)
-      Spatial
-    #else
-      <a href="#url_for_home?&queryOpts=spatial#debug#annotate">
-        Spatial</a>
-    #end
-  </span>
-
-  ## Group By Field
-  #set( $selected = ($queryOpts == "group") )
-  <span class="tab #if($selected)selected#end">
-    #if($selected)
-      Group By
-    #else
-      <a href="#url_for_home?#debug#annotate&queryOpts=group&group=true&group.field=manu_exact">
-        Group By</a>
-    #end
-  </span>
-
-</div>

diff --git a/zookeeper/solr/collection1/conf/xslt/example.xsl b/zookeeper/solr/collection1/conf/xslt/example.xsl
deleted file mode 100644 (file)
index b899270..0000000
--- a/zookeeper/solr/collection1/conf/xslt/example.xsl
+++ /dev/null
@@ -1,132 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-
-<!-- 
- * Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- -->
-
-<!-- 
-  Simple transform of Solr query results to HTML
- -->
-<xsl:stylesheet version='1.0'
-    xmlns:xsl='http://www.w3.org/1999/XSL/Transform'
->
-
-  <xsl:output media-type="text/html" encoding="UTF-8"/> 
-  
-  <xsl:variable name="title" select="concat('Solr search results (',response/result/@numFound,' documents)')"/>
-  
-  <xsl:template match='/'>
-    <html>
-      <head>
-        <title><xsl:value-of select="$title"/></title>
-        <xsl:call-template name="css"/>
-      </head>
-      <body>
-        <h1><xsl:value-of select="$title"/></h1>
-        <div class="note">
-          This has been formatted by the sample "example.xsl" transform -
-          use your own XSLT to get a nicer page
-        </div>
-        <xsl:apply-templates select="response/result/doc"/>
-      </body>
-    </html>
-  </xsl:template>
-  
-  <xsl:template match="doc">
-    <xsl:variable name="pos" select="position()"/>
-    <div class="doc">
-      <table width="100%">
-        <xsl:apply-templates>
-          <xsl:with-param name="pos"><xsl:value-of select="$pos"/></xsl:with-param>
-        </xsl:apply-templates>
-      </table>
-    </div>
-  </xsl:template>
-
-  <xsl:template match="doc/*[@name='score']" priority="100">
-    <xsl:param name="pos"></xsl:param>
-    <tr>
-      <td class="name">
-        <xsl:value-of select="@name"/>
-      </td>
-      <td class="value">
-        <xsl:value-of select="."/>
-
-        <xsl:if test="boolean(//lst[@name='explain'])">
-          <xsl:element name="a">
-            <!-- can't allow whitespace here -->
-            <xsl:attribute name="href">javascript:toggle("<xsl:value-of select="concat('exp-',$pos)" />");</xsl:attribute>?</xsl:element>
-          <br/>
-          <xsl:element name="div">
-            <xsl:attribute name="class">exp</xsl:attribute>
-            <xsl:attribute name="id">
-              <xsl:value-of select="concat('exp-',$pos)" />
-            </xsl:attribute>
-            <xsl:value-of select="//lst[@name='explain']/str[position()=$pos]"/>
-          </xsl:element>
-        </xsl:if>
-      </td>
-    </tr>
-  </xsl:template>
-
-  <xsl:template match="doc/arr" priority="100">
-    <tr>
-      <td class="name">
-        <xsl:value-of select="@name"/>
-      </td>
-      <td class="value">
-        <ul>
-        <xsl:for-each select="*">
-          <li><xsl:value-of select="."/></li>
-        </xsl:for-each>
-        </ul>
-      </td>
-    </tr>
-  </xsl:template>
-
-
-  <xsl:template match="doc/*">
-    <tr>
-      <td class="name">
-        <xsl:value-of select="@name"/>
-      </td>
-      <td class="value">
-        <xsl:value-of select="."/>
-      </td>
-    </tr>
-  </xsl:template>
-
-  <xsl:template match="*"/>
-  
-  <xsl:template name="css">
-    <script>
-      function toggle(id) {
-        var obj = document.getElementById(id);
-        obj.style.display = (obj.style.display != 'block') ? 'block' : 'none';
-      }
-    </script>
-    <style type="text/css">
-      body { font-family: "Lucida Grande", sans-serif }
-      td.name { font-style: italic; font-size:80%; }
-      td { vertical-align: top; }
-      ul { margin: 0px; margin-left: 1em; padding: 0px; }
-      .note { font-size:80%; }
-      .doc { margin-top: 1em; border-top: solid grey 1px; }
-      .exp { display: none; font-family: monospace; white-space: pre; }
-    </style>
-  </xsl:template>
-
-</xsl:stylesheet>

diff --git a/zookeeper/solr/collection1/conf/xslt/example_atom.xsl b/zookeeper/solr/collection1/conf/xslt/example_atom.xsl
deleted file mode 100644 (file)
index b6c2315..0000000
--- a/zookeeper/solr/collection1/conf/xslt/example_atom.xsl
+++ /dev/null
@@ -1,67 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-
-<!-- 
- * Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- -->
-
-<!-- 
-  Simple transform of Solr query results to Atom
- -->
-
-<xsl:stylesheet version='1.0'
-    xmlns:xsl='http://www.w3.org/1999/XSL/Transform'>
-
-  <xsl:output
-       method="xml"
-       encoding="utf-8"
-       media-type="application/xml"
-  />
-
-  <xsl:template match='/'>
-    <xsl:variable name="query" select="response/lst[@name='responseHeader']/lst[@name='params']/str[@name='q']"/>
-    <feed xmlns="http://www.w3.org/2005/Atom">
-      <title>Example Solr Atom 1.0 Feed</title>
-      <subtitle>
-       This has been formatted by the sample "example_atom.xsl" transform -
-       use your own XSLT to get a nicer Atom feed.
-      </subtitle>
-      <author>
-        <name>Apache Solr</name>
-        <email>solr-user@lucene.apache.org</email>
-      </author>
-      <link rel="self" type="application/atom+xml" 
-            href="http://localhost:8983/solr/q={$query}&amp;wt=xslt&amp;tr=atom.xsl"/>
-      <updated>
-        <xsl:value-of select="response/result/doc[position()=1]/date[@name='timestamp']"/>
-      </updated>
-      <id>tag:localhost,2007:example</id>
-      <xsl:apply-templates select="response/result/doc"/>
-    </feed>
-  </xsl:template>
-    
-  <!-- search results xslt -->
-  <xsl:template match="doc">
-    <xsl:variable name="id" select="str[@name='id']"/>
-    <entry>
-      <title><xsl:value-of select="str[@name='name']"/></title>
-      <link href="http://localhost:8983/solr/select?q={$id}"/>
-      <id>tag:localhost,2007:<xsl:value-of select="$id"/></id>
-      <summary><xsl:value-of select="arr[@name='features']"/></summary>
-      <updated><xsl:value-of select="date[@name='timestamp']"/></updated>
-    </entry>
-  </xsl:template>
-
-</xsl:stylesheet>

diff --git a/zookeeper/solr/collection1/conf/xslt/example_rss.xsl b/zookeeper/solr/collection1/conf/xslt/example_rss.xsl
deleted file mode 100644 (file)
index 2857f11..0000000
--- a/zookeeper/solr/collection1/conf/xslt/example_rss.xsl
+++ /dev/null
@@ -1,66 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-
-<!-- 
- * Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- -->
-
-<!-- 
-  Simple transform of Solr query results to RSS
- -->
-
-<xsl:stylesheet version='1.0'
-    xmlns:xsl='http://www.w3.org/1999/XSL/Transform'>
-
-  <xsl:output
-       method="xml"
-       encoding="utf-8"
-       media-type="application/xml"
-  />
-  <xsl:template match='/'>
-    <rss version="2.0">
-       <channel>
-        <title>Example Solr RSS 2.0 Feed</title>
-         <link>http://localhost:8983/solr</link>
-         <description>
-          This has been formatted by the sample "example_rss.xsl" transform -
-          use your own XSLT to get a nicer RSS feed.
-         </description>
-         <language>en-us</language>
-         <docs>http://localhost:8983/solr</docs>
-         <xsl:apply-templates select="response/result/doc"/>
-       </channel>
-    </rss>
-  </xsl:template>
-  
-  <!-- search results xslt -->
-  <xsl:template match="doc">
-    <xsl:variable name="id" select="str[@name='id']"/>
-    <xsl:variable name="timestamp" select="date[@name='timestamp']"/>
-    <item>
-      <title><xsl:value-of select="str[@name='name']"/></title>
-      <link>
-        http://localhost:8983/solr/select?q=id:<xsl:value-of select="$id"/>
-      </link>
-      <description>
-        <xsl:value-of select="arr[@name='features']"/>
-      </description>
-      <pubDate><xsl:value-of select="$timestamp"/></pubDate>
-      <guid>
-        http://localhost:8983/solr/select?q=id:<xsl:value-of select="$id"/>
-      </guid>
-    </item>
-  </xsl:template>
-</xsl:stylesheet>

diff --git a/zookeeper/solr/collection1/conf/xslt/luke.xsl b/zookeeper/solr/collection1/conf/xslt/luke.xsl
deleted file mode 100644 (file)
index 8553f3c..0000000
--- a/zookeeper/solr/collection1/conf/xslt/luke.xsl
+++ /dev/null
@@ -1,337 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-    Licensed to the Apache Software Foundation (ASF) under one or more
-    contributor license agreements.  See the NOTICE file distributed with
-    this work for additional information regarding copyright ownership.
-    The ASF licenses this file to You under the Apache License, Version 2.0
-    (the "License"); you may not use this file except in compliance with
-    the License.  You may obtain a copy of the License at
-    
-    http://www.apache.org/licenses/LICENSE-2.0
-    
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
--->
-
-
-<!-- 
-  Display the luke request handler with graphs
- -->
-<xsl:stylesheet
-    xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-    xmlns="http://www.w3.org/1999/xhtml"
-    version="1.0"
-    >
-    <xsl:output
-        method="html"
-        encoding="UTF-8"
-        media-type="text/html"
-        doctype-public="-//W3C//DTD XHTML 1.0 Strict//EN"
-        doctype-system="http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"
-    />
-
-    <xsl:variable name="title">Solr Luke Request Handler Response</xsl:variable>
-
-    <xsl:template match="/">
-        <html xmlns="http://www.w3.org/1999/xhtml">
-            <head>
-                <link rel="stylesheet" type="text/css" href="solr-admin.css"/>
-                <link rel="icon" href="favicon.ico" type="image/ico"/>
-                <link rel="shortcut icon" href="favicon.ico" type="image/ico"/>
-                <title>
-                    <xsl:value-of select="$title"/>
-                </title>
-                <xsl:call-template name="css"/>
-
-            </head>
-            <body>
-                <h1>
-                    <xsl:value-of select="$title"/>
-                </h1>
-                <div class="doc">
-                    <ul>
-                        <xsl:if test="response/lst[@name='index']">
-                            <li>
-                                <a href="#index">Index Statistics</a>
-                            </li>
-                        </xsl:if>
-                        <xsl:if test="response/lst[@name='fields']">
-                            <li>
-                                <a href="#fields">Field Statistics</a>
-                                <ul>
-                                    <xsl:for-each select="response/lst[@name='fields']/lst">
-                                        <li>
-                                            <a href="#{@name}">
-                                                <xsl:value-of select="@name"/>
-                                            </a>
-                                        </li>
-                                    </xsl:for-each>
-                                </ul>
-                            </li>
-                        </xsl:if>
-                        <xsl:if test="response/lst[@name='doc']">
-                            <li>
-                                <a href="#doc">Document statistics</a>
-                            </li>
-                        </xsl:if>
-                    </ul>
-                </div>
-                <xsl:if test="response/lst[@name='index']">
-                    <h2><a name="index"/>Index Statistics</h2>
-                    <xsl:apply-templates select="response/lst[@name='index']"/>
-                </xsl:if>
-                <xsl:if test="response/lst[@name='fields']">
-                    <h2><a name="fields"/>Field Statistics</h2>
-                    <xsl:apply-templates select="response/lst[@name='fields']"/>
-                </xsl:if>
-                <xsl:if test="response/lst[@name='doc']">
-                    <h2><a name="doc"/>Document statistics</h2>
-                    <xsl:apply-templates select="response/lst[@name='doc']"/>
-                </xsl:if>
-            </body>
-        </html>
-    </xsl:template>
-
-    <xsl:template match="lst">
-        <xsl:if test="parent::lst">
-            <tr>
-                <td colspan="2">
-                    <div class="doc">
-                        <xsl:call-template name="list"/>
-                    </div>
-                </td>
-            </tr>
-        </xsl:if>
-        <xsl:if test="not(parent::lst)">
-            <div class="doc">
-                <xsl:call-template name="list"/>
-            </div>
-        </xsl:if>
-    </xsl:template>
-
-    <xsl:template name="list">
-        <xsl:if test="count(child::*)>0">
-            <table>
-                <thead>
-                    <tr>
-                        <th colspan="2">
-                            <p>
-                                <a name="{@name}"/>
-                            </p>
-                            <xsl:value-of select="@name"/>
-                        </th>
-                    </tr>
-                </thead>
-                <tbody>
-                    <xsl:choose>
-                        <xsl:when
-                            test="@name='histogram'">
-                            <tr>
-                                <td colspan="2">
-                                    <xsl:call-template name="histogram"/>
-                                </td>
-                            </tr>
-                        </xsl:when>
-                        <xsl:otherwise>
-                            <xsl:apply-templates/>
-                        </xsl:otherwise>
-                    </xsl:choose>
-                </tbody>
-            </table>
-        </xsl:if>
-    </xsl:template>
-
-    <xsl:template name="histogram">
-        <div class="doc">
-            <xsl:call-template name="barchart">
-                <xsl:with-param name="max_bar_width">50</xsl:with-param>
-                <xsl:with-param name="iwidth">800</xsl:with-param>
-                <xsl:with-param name="iheight">160</xsl:with-param>
-                <xsl:with-param name="fill">blue</xsl:with-param>
-            </xsl:call-template>
-        </div>
-    </xsl:template>
-
-    <xsl:template name="barchart">
-        <xsl:param name="max_bar_width"/>
-        <xsl:param name="iwidth"/>
-        <xsl:param name="iheight"/>
-        <xsl:param name="fill"/>
-        <xsl:variable name="max">
-            <xsl:for-each select="int">
-                <xsl:sort data-type="number" order="descending"/>
-                <xsl:if test="position()=1">
-                    <xsl:value-of select="."/>
-                </xsl:if>
-            </xsl:for-each>
-        </xsl:variable>
-        <xsl:variable name="bars">
-           <xsl:value-of select="count(int)"/>
-        </xsl:variable>
-        <xsl:variable name="bar_width">
-           <xsl:choose>
-             <xsl:when test="$max_bar_width &lt; ($iwidth div $bars)">
-               <xsl:value-of select="$max_bar_width"/>
-             </xsl:when>
-             <xsl:otherwise>
-               <xsl:value-of select="$iwidth div $bars"/>
-             </xsl:otherwise>
-           </xsl:choose>
-        </xsl:variable>
-        <table class="histogram">
-           <tbody>
-              <tr>
-                <xsl:for-each select="int">
-                   <td>
-                 <xsl:value-of select="."/>
-                 <div class="histogram">
-                  <xsl:attribute name="style">background-color: <xsl:value-of select="$fill"/>; width: <xsl:value-of select="$bar_width"/>px; height: <xsl:value-of select="($iheight*number(.)) div $max"/>px;</xsl:attribute>
-                 </div>
-                   </td> 
-                </xsl:for-each>
-              </tr>
-              <tr>
-                <xsl:for-each select="int">
-                   <td>
-                       <xsl:value-of select="@name"/>
-                   </td>
-                </xsl:for-each>
-              </tr>
-           </tbody>
-        </table>
-    </xsl:template>
-
-    <xsl:template name="keyvalue">
-        <xsl:choose>
-            <xsl:when test="@name">
-                <tr>
-                    <td class="name">
-                        <xsl:value-of select="@name"/>
-                    </td>
-                    <td class="value">
-                        <xsl:value-of select="."/>
-                    </td>
-                </tr>
-            </xsl:when>
-            <xsl:otherwise>
-                <xsl:value-of select="."/>
-            </xsl:otherwise>
-        </xsl:choose>
-    </xsl:template>
-
-    <xsl:template match="int|bool|long|float|double|uuid|date">
-        <xsl:call-template name="keyvalue"/>
-    </xsl:template>
-
-    <xsl:template match="arr">
-        <tr>
-            <td class="name">
-                <xsl:value-of select="@name"/>
-            </td>
-            <td class="value">
-                <ul>
-                    <xsl:for-each select="child::*">
-                        <li>
-                            <xsl:apply-templates/>
-                        </li>
-                    </xsl:for-each>
-                </ul>
-            </td>
-        </tr>
-    </xsl:template>
-
-    <xsl:template match="str">
-        <xsl:choose>
-            <xsl:when test="@name='schema' or @name='index' or @name='flags'">
-                <xsl:call-template name="schema"/>
-            </xsl:when>
-            <xsl:otherwise>
-                <xsl:call-template name="keyvalue"/>
-            </xsl:otherwise>
-        </xsl:choose>
-    </xsl:template>
-
-    <xsl:template name="schema">
-        <tr>
-            <td class="name">
-                <xsl:value-of select="@name"/>
-            </td>
-            <td class="value">
-                <xsl:if test="contains(.,'unstored')">
-                    <xsl:value-of select="."/>
-                </xsl:if>
-                <xsl:if test="not(contains(.,'unstored'))">
-                    <xsl:call-template name="infochar2string">
-                        <xsl:with-param name="charList">
-                            <xsl:value-of select="."/>
-                        </xsl:with-param>
-                    </xsl:call-template>
-                </xsl:if>
-            </td>
-        </tr>
-    </xsl:template>
-
-    <xsl:template name="infochar2string">
-        <xsl:param name="i">1</xsl:param>
-        <xsl:param name="charList"/>
-
-        <xsl:variable name="char">
-            <xsl:value-of select="substring($charList,$i,1)"/>
-        </xsl:variable>
-        <xsl:choose>
-            <xsl:when test="$char='I'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='I']"/> - </xsl:when>
-            <xsl:when test="$char='T'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='T']"/> - </xsl:when>
-            <xsl:when test="$char='S'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='S']"/> - </xsl:when>
-            <xsl:when test="$char='M'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='M']"/> - </xsl:when>
-            <xsl:when test="$char='V'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='V']"/> - </xsl:when>
-            <xsl:when test="$char='o'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='o']"/> - </xsl:when>
-            <xsl:when test="$char='p'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='p']"/> - </xsl:when>
-            <xsl:when test="$char='O'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='O']"/> - </xsl:when>
-            <xsl:when test="$char='L'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='L']"/> - </xsl:when>
-            <xsl:when test="$char='B'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='B']"/> - </xsl:when>
-            <xsl:when test="$char='C'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='C']"/> - </xsl:when>
-            <xsl:when test="$char='f'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='f']"/> - </xsl:when>
-            <xsl:when test="$char='l'">
-                <xsl:value-of select="/response/lst[@name='info']/lst/str[@name='l']"/> -
-            </xsl:when>
-        </xsl:choose>
-
-        <xsl:if test="not($i>=string-length($charList))">
-            <xsl:call-template name="infochar2string">
-                <xsl:with-param name="i">
-                    <xsl:value-of select="$i+1"/>
-                </xsl:with-param>
-                <xsl:with-param name="charList">
-                    <xsl:value-of select="$charList"/>
-                </xsl:with-param>
-            </xsl:call-template>
-        </xsl:if>
-    </xsl:template>
-    <xsl:template name="css">
-        <style type="text/css">
-            <![CDATA[
-            td.name {font-style: italic; font-size:80%; }
-            .doc { margin: 0.5em; border: solid grey 1px; }
-            .exp { display: none; font-family: monospace; white-space: pre; }
-            div.histogram { background: none repeat scroll 0%; -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial;}
-            table.histogram { width: auto; vertical-align: bottom; }
-            table.histogram td, table.histogram th { text-align: center; vertical-align: bottom; border-bottom: 1px solid #ff9933; width: auto; }
-            ]]>
-        </style>
-    </xsl:template>
-</xsl:stylesheet>

diff --git a/zookeeper/solr/collection1/conf/xslt/updateXml.xsl b/zookeeper/solr/collection1/conf/xslt/updateXml.xsl
deleted file mode 100644 (file)
index daf1344..0000000
--- a/zookeeper/solr/collection1/conf/xslt/updateXml.xsl
+++ /dev/null
@@ -1,70 +0,0 @@
-<!-- 
- * Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- -->
-
-<!--
-  Simple transform of Solr query response into Solr Update XML compliant XML.
-  When used in the xslt response writer you will get UpdaateXML as output.
-  But you can also store a query response XML to disk and feed this XML to
-  the XSLTUpdateRequestHandler to index the content. Provided as example only.
-  See http://wiki.apache.org/solr/XsltUpdateRequestHandler for more info
- -->
-<xsl:stylesheet version='1.0' xmlns:xsl='http://www.w3.org/1999/XSL/Transform'>
-  <xsl:output media-type="text/xml" method="xml" indent="yes"/>
-
-  <xsl:template match='/'>
-    <add>
-        <xsl:apply-templates select="response/result/doc"/>
-    </add>
-  </xsl:template>
-  
-  <!-- Ignore score (makes no sense to index) -->
-  <xsl:template match="doc/*[@name='score']" priority="100">
-  </xsl:template>
-
-  <xsl:template match="doc">
-    <xsl:variable name="pos" select="position()"/>
-    <doc>
-        <xsl:apply-templates>
-          <xsl:with-param name="pos"><xsl:value-of select="$pos"/></xsl:with-param>
-        </xsl:apply-templates>
-    </doc>
-  </xsl:template>
-
-  <!-- Flatten arrays to duplicate field lines -->
-  <xsl:template match="doc/arr" priority="100">
-      <xsl:variable name="fn" select="@name"/>
-      
-      <xsl:for-each select="*">
-               <xsl:element name="field">
-                   <xsl:attribute name="name"><xsl:value-of select="$fn"/></xsl:attribute>
-               <xsl:value-of select="."/>
-               </xsl:element>
-      </xsl:for-each>
-  </xsl:template>
-
-
-  <xsl:template match="doc/*">
-      <xsl:variable name="fn" select="@name"/>
-
-       <xsl:element name="field">
-           <xsl:attribute name="name"><xsl:value-of select="$fn"/></xsl:attribute>
-        <xsl:value-of select="."/>
-       </xsl:element>
-  </xsl:template>
-
-  <xsl:template match="*"/>
-</xsl:stylesheet>

diff --git a/zookeeper/solr/collection1/core.properties b/zookeeper/solr/collection1/core.properties
deleted file mode 100644 (file)
index bc0cf7d..0000000
--- a/zookeeper/solr/collection1/core.properties
+++ /dev/null
@@ -1 +0,0 @@
-name=collection1
\ No newline at end of file

diff --git a/zookeeper/solr/solr.xml b/zookeeper/solr/solr.xml
deleted file mode 100644 (file)
index 7ae7244..0000000
--- a/zookeeper/solr/solr.xml
+++ /dev/null
@@ -1,45 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!--
-   This is an example of a simple "solr.xml" file for configuring one or 
-   more Solr Cores, as well as allowing Cores to be added, removed, and 
-   reloaded via HTTP requests.
-
-   More information about options available in this configuration file, 
-   and Solr Core administration can be found online:
-   http://wiki.apache.org/solr/CoreAdmin
--->
-
-<solr>
-
-  <solrcloud>
-    <str name="host">${host:}</str>
-    <int name="hostPort">${jetty.port:8983}</int>
-    <str name="hostContext">${hostContext:solr}</str>
-    <int name="zkClientTimeout">${zkClientTimeout:15000}</int>
-    <bool name="genericCoreNodeNames">${genericCoreNodeNames:true}</bool>
-  </solrcloud>
-
-  <shardHandlerFactory name="shardHandlerFactory"
-    class="HttpShardHandlerFactory">
-    <int name="socketTimeout">${socketTimeout:0}</int>
-    <int name="connTimeout">${connTimeout:0}</int>
-  </shardHandlerFactory>
-
-</solr>

diff --git a/zookeeper/solr/zoo.cfg b/zookeeper/solr/zoo.cfg
deleted file mode 100644 (file)
index aea4518..0000000
--- a/zookeeper/solr/zoo.cfg
+++ /dev/null
@@ -1,17 +0,0 @@
-# The number of milliseconds of each tick
-tickTime=2000
-# The number of ticks that the initial
-# synchronization phase can take
-initLimit=10
-# The number of ticks that can pass between
-# sending a request and getting an acknowledgement
-syncLimit=5
-
-# the directory where the snapshot is stored.
-# dataDir=/opt/zookeeper/data
-# NOTE: Solr defaults the dataDir to <solrHome>/zoo_data
-
-# the port at which the clients will connect
-# clientPort=2181
-# NOTE: Solr sets this based on zkRun / zkHost params
-

diff --git a/zookeeper/start.jar b/zookeeper/start.jar
deleted file mode 100644 (file)
index 3e47369..0000000
Binary files a/zookeeper/start.jar and /dev/null differ

diff --git a/zookeeper/webapps/solr.war b/zookeeper/webapps/solr.war
deleted file mode 120000 (symlink)
index a7ed5bd..0000000
--- a/zookeeper/webapps/solr.war
+++ /dev/null
@@ -1 +0,0 @@
-../../dist/solr-4.6.0.war
\ No newline at end of file

diff --git a/zookeeper/zookeeper.sh b/zookeeper/zookeeper.sh
deleted file mode 120000 (symlink)
index 8f61e24..0000000
--- a/zookeeper/zookeeper.sh
+++ /dev/null
@@ -1 +0,0 @@
-../scripts/zookeeper.sh
\ No newline at end of file