`s are:
+application above has only two such widgets: a search box and a
+results area. But more are supported. The main widgets are:
* `mkwsSearch` -- provides the search box and button.
@@ -99,9 +105,8 @@ results area. But more are supported. The main `
`s are:
paging for large results sets, facets for refining a search,
sorting facilities, etc.
-* `mkwsLang` -- provides links to switch between one of several
- different UI languages. By default, English, Danish and German are
- provided.
+* `mkwsStat` --provides a status line summarising the statistics of
+ the various targets.
* `mkwsSwitch` -- provides links to switch between a view of the
result records and of the targets that provide them. Only
@@ -111,8 +116,9 @@ results area. But more are supported. The main `
`s are:
when selected by the link in the `mkwsSwitch` area. Of interest
mostly for fault diagnosis rather than for end-users.
-* `mkwsStat` --provides a status line summarising the statistics of
- the various targets.
+* `mkwsLang` -- provides links to switch between one of several
+ different UI languages. By default, English, Danish and German are
+ provided.
To see all of these working together, just put them all into the HTML
`` like so:
@@ -124,15 +130,16 @@ To see all of these working together, just put them all into the HTML
+The full set of supported widgets is described in the
+reference guide below.
+
Configuration
=============
Many aspects of the behaviour of MKWS can be modified by setting
-parameters into the `mkws_config` object. **This must be done *before*
-including the MKWS JavaScript** so that when that code is executed it
-can refer to the configuration values. So the HTML header looks like
-this:
+parameters into the `mkws_config` object. So the HTML header looks
+like this:
+
+The Facet template has a special feature where you can override it on a
+per-facet basis by adding a dash and the facet name as a suffix eg.
+`facet-subjects` rather than `facet`. (So `class="mkws-template-facet-subjects"`)
+
+You can also explicitly specify a different template for a particular instance
+of a widget by providing the name of your alternative (eg. SpecialPager) as the
+value of the `template` key in the MKWS config object for that widget:
+for example, ``.
+
+Templates for MKWS can also be
+[precompiled](http://handlebarsjs.com/precompilation.html). If a precompiled
+template of the same name is found in the `Handlebars.templates` object, it
+will be used instead of the default.
+
+Inspecting metadata for templating
+----------------------------------
+
+MKWS makes requests to Service Proxy or Pazpar2 that perform the actual
+searching. Depending on how these are configured and what is available from the
+targets you are searching there may be more data available than what is
+presented by the default templates.
+
+Handlebars offers a convenient log helper that will output the contents of a
+variable for you to inspect. This lets you look at exactly what is being
+returned by the back end without needing to use a Javascript debugger. For
+example, you might prepend `{{log hits}}` to the Records template in order to
+see what is being returned with each search result in the list. In order for
+this to work you'll need to enable verbose output from Handlebars which is done
+by including this line or similar:
+
+
+
+Internationalisation
+--------------------
-* `mkwsTemplate_Record` -- used when displaying a full record.
+If you would like your template to use the built in translation functionality,
+output locale specific text via the mkws-translate helper like so:
+`{{{mkws-translate "a few words"}}}`.
-For both of these the metadata record is passed in, and its fields can
-be referenced in the template. As well as the metadata fields
-(`md-*`), two special fields are provided to the `mkwsTemplate_Summary`
-template, for creating popup links for full records. These are `_id`,
-which must be provided as the `id` attribute of a link tag, and
-`_onclick`, which must be provided as the `onclick` attribute.
+Example
+-------
-For example, an application can install a simple author+title summary
-record in place of the usual one providing the following template:
+Rather than use the included AJAX helpers to render record details inline,
+here's a Records template that will link directly to the source via the address
+provided in the metadata as the first element of `md-electronic-url`:
-
-
-For details of Handlebars template syntax, see
-[the online documentation](http://handlebarsjs.com/).
+ {{#if md-title-remainder}}
+
{{md-title-remainder}}
+ {{/if}}
+ {{#if md-title-responsibility}}
+
{{md-title-responsibility}}
+ {{/if}}
+
+ {{/each}}
+
+For a more involved example where markup for multiple widgets is decorated with
+[Bootstrap](http://getbootstrap.com/) classes and a custom Handlebars helper is
+employed, take a look at the source of
+[topic.html](http://example.indexdata.com/topic.html?q=water).
-Responsive design
------------------
-Metasearching applications may need to appear differently on
-small-screened mobile devices, or change their appearance when
-screen-width changes (as when a small device is rotated). To achieve
-this, MKWS supports responsive design which will move the termlists to
-the bottom on narrow screens and to the sidebar on wide screens.
+Refinements
+===========
-To turn on this behaviour, set the `responsive_design_width` to the desired
-threshhold width in pixels. For example:
-
+Message of the day
+------------------
-If individual result-related components are in use in place of the
-all-in-one mkwsResults, then the redesigned application needs to
-specify the locations where the termlists should appear in both
-cases. In this case, wrap the wide-screen `mkwsTermlists` element in a
-`mkwsTermlists-Container-wide` element; and provide an
-`mkwsTermlists-Container-narrow` element in the place where the narrow-screen
-termlists should appear.
+Some applications might like to open with content in the area that
+will subsequently be filled with result-records -- a message of the
+day, a welcome message or a help page. This can be done by placing an
+`mkwsMOTD` division anywhere on the page. It will be moved into the
+`mkwsResults` area and initially displayed, but will be hidden when a
+search is made.
Popup results with jQuery UI
----------------------------
The [jQuery UI library](http://en.wikipedia.org/wiki/JQuery_UI)
-can be used to construct MKWS applications in which the only component
+can be used to construct MKWS applications in which the only widget
generally visible on the page is a search box, and the results appear
in a popup. The key part of such an application is this invocation of
the MKWS jQuery plugin:
@@ -431,7 +477,7 @@ this is very simple:
"//sp-mkws.indexdata.com/service-proxy/?command=auth&action=perconfig" };
-> TODO This should be the default setting: see MKWS-251.
+> TODO This should be the default setting: see **MKWS-251**.
And ensure that access to the MWKS application is from the correct
Referrer URL or IP-range.
@@ -445,10 +491,11 @@ URL containing that hostname, such as
`//yourname.sp-mkws.indexdata.com/service-proxy/?command=auth&action=perconfig`
> TODO It should be possible to change just the hostname without
-> needing to repeat the rest of the URL (protocol, path, query)
+> needing to repeat the rest of the URL (protocol, path, query): see
+> **MKWS-252**.
> TODO When changing the SP authentication URL, the Pazpar2 URL should
-> in general change along with it.
+> in general change along with it: see **MKWS-253**.
### (Optional): embed credentials for access to the library
@@ -459,7 +506,8 @@ by setting the `service_proxy_auth` configuration item to a URL such as
`//sp-mkws.indexdata.com/service-proxy/?command=auth&action=perconfig&username=mike&password=swordfish`
> TODO It should be possible to add the username and password to the
-> configuration without needing to repeat the rest of the URL.
+> configuration without needing to repeat the rest of the URL: see
+> **MKWS-254**.
### (Optional): conceal credentials from HTML source
@@ -480,7 +528,7 @@ yourname.com:
Step 1: add a rewriting authentication alias to the configuration:
RewriteEngine on
- RewriteRule /spauth/ http://mkws.indexdata.com/service-proxy/?command=auth&action=check,login&username=U&password=PW [P]
+ RewriteRule /spauth/ http://sp-mkws.indexdata.com/service-proxy/?command=auth&action=check,login&username=U&password=PW [P]
Step 2: set the MKWS configuration item `service_proxy_auth` to
@@ -618,9 +666,9 @@ structure.
3. [10, 20, 30, 50]
-4. http://mkws.indexdata.com/service-proxy-auth
+4. http://sp-mkws.indexdata.com/service-proxy-auth
-5. http://mkws.indexdata.com/service-proxy/
+5. http://sp-mkws.indexdata.com/service-proxy/
6. [["relevance"], ["title:1", "title"], ["date:0", "newest"], ["date:1", "oldest"]]
@@ -699,19 +747,19 @@ from that toolkit. The relevant lines are:
----
-Element Type Default Description
--------- ----- --------- ------------
-popup_width string 880 Width of the popup window (if used), in
- pixels.
+Element Type Default Description
+-------- ----- ------- ------------
+popup_width string 880 Width of the popup window (if used), in
+ pixels.
-popup_height string 760 Height of the popup window (if used), in
- pixels.
+popup_height string 760 Height of the popup window (if used), in
+ pixels.
-popup_button string input.mkwsButton (Never change this.)
+popup_button string `input.mkwsButton` (Never change this.)
-popup_modal string 0 Modal confirmation mode. Valid values are 0 or 1
+popup_modal string 0 Modal confirmation mode. Valid values are 0 or 1
-popup_autoOpen string 1 Open popup window on load. Valid values are 0 or 1
+popup_autoOpen string 1 Open popup window on load. Valid values are 0 or 1
----
@@ -721,7 +769,7 @@ The structure of the HTML generated by the MKWS widgets
In order to override the default CSS styles provided by the MasterKey Widget
Set, it's necessary to understand that structure of the HTML elements that are
-generated within the components. This knowledge make it possible, for example,
+generated within the widgets. This knowledge make it possible, for example,
to style each `
` with class `term` but only when it occurs inside an
element with ID `#mkwsTermlists`, so as to avoid inadvertently styling other
elements using the same class in the non-MKWS parts of the page.
@@ -788,4 +836,4 @@ and .CLASS indicates an instance of a class.
- - -
-Copyright (C) 2013-2014 by IndexData ApS,
+Copyright (C) 2013-2014 Index Data ApS.